I was wondering why are upload speeds so much slower then download speeds with residential IPS. I know downloading is alot more common then uploading something. Does it cost more or something, for the ISP to send information out.
View 5 RepliesI just upgraded my internet plan over the phone from 10mbps to 20mbps + WiFi. Now my connection speed is slower then it was before.
View 2 Replies View RelatedI have ATT DSL Extreme service and I actually get about 8.0 service. There is a POTS splitter in my box that splits this line out to my office about 75 feet away. I recently moved the office back into the main residence and rather than move the 8 pair wire ATT put in, I jumped it with a new wire back to my new office. At the POTS, I didn't see where I could add a line so I spliced the pair I needed. Now it essentially feeds either building. But, now my speed tops out at just over 7.0. I have to believe the splice affected the speed but I don't understand why.
View 1 Replies View RelatedI recently ran a couple of speed tests to see how fast my internet was, the average reading was about 1.1Mbps, yet the most I've seenmy downloads downloading at is 180Kbps. I am connected wirelessly.
View 3 Replies View RelatedHave noticed that wireless download speed deteriorated since they installed this?
Mine seems horrendously slower.
have a PIC 515e connected to two ISPs via 2 interfaces. ISP1 is a 3.5Mbps aDSL line, and ISP2 is a 30Mbps business cable. I've confirmed the speeds by connecting the cabled directly into a laptop and using wget to download very large files from known-fast sites.
For admin reasons, I need to access two specific subnets using the slower ISP1. The rest of internet traffic should go to the much faster ISP2.
So I configure ISP2 as the default gateway, static routes for the two subnets to ISP1, set up NAT (PAT) and it all works like a charm. I've confirmed that ISP1 is used for only the two subnets, and ISP2 for everything else. CAPTUREs on the pix also confirm this. So far, it all works great.
But for reasons I don't understand, my max. download speed is 3.5 Mbps (the slow DSL). Using various speed tests and wget, I simply cannot get a download speed faster than my 3.5 Mbps DSL line.
Here is my config:
interface ethernet0 100full
interface ethernet1 100full
interface ethernet2 100full
[Code]....
I am getting very slow download speeds on my wireless router (Linksys model#WRT160N). I measured it on speedtest.net. with my ASUS laptop, ASUS Transformer Prime tablet, and 2 Ipod touches. All similar speeds.
Download avg: 1.30 Mbps
upload avg: 6.20 Mbps
I measured my desktop speed that is hardwired through the router to the modem.
Download avg: 30.00 Mbps
upload ave: 6.20 Mbps
I have scanned all the wireless connection in my area and found them to occupy channels 1, 6, 11. I tried changing my channels one at a time for all 11 channels. Some did a little better than others but not a lot.Also, if I by a dual channel router, can all wireless devices pick up on the 5GHz spectrim and if some, could this alleviate some interference?Is it possible that my router is going bad and a new single channel 2.4 GHz router will be fine?
I have two computers, both of them running Windows 7. One of them has been experiencing an odd problem for about six months now, and now that school is out I have time to mess with it. When I try to do certain things, the download speed periodically drops to zero. Specifically, I've noticed it when using Firefox and Steam, but also for IE and a few other browsers I installed for the sake of testing. I know I'm not *losing* connectivity, because everything that isn't specifically downloading a file works fine. Skype calls work fine, Utorrent streams at a steady rate, but for some reason Steam and Firefox have speed graphs that look like the heart rate monitor of someone with a very weak pulse. It starts off strong, a nice solid 1 MB per second, and then after 10-30 seconds it'll slowly decline to 0, and sit there for anywhere from 10 seconds to half an hour before picking up to full speed again. I've tried reinstalling drivers, I've tried buying a new network card, I've tried running antivirus scans, and I've tried uninstalling my antiviruses. The only thing that works for sure is putting it into safe mode. In safe mode, the downloads proceed smoothly. I tried making a list of everything that ran in safe mode, and then rebooted into normal mode and closed each nonessential process and service, but that didn't work either.
View 7 Replies View RelatedAfter changing name and password, the speed became much slower. Checking it with speed test, download is just 0.19 Mbps while upload is 3 Mbps. Wired speed is much better, download is 20 Mbps. So it is not the problem of I provider, comcast. How to solve this problem? I rebooted and reset it already.
View 8 Replies View RelatedWe are using WI-FI with more than 20 clients at a time.Now the speed seems to very decreased,because most of them using torrents for downloading.Is this the correct reason for low speed?How can I detect who or howmany people using torrent?And is there any need to block torrents?
View 3 Replies View RelatedI can't get utube videos when I'm going through the router. I can get them if I'm on the modem only. The same applies to long PDFs, software updates, long virus definition updates, videos in general and graphics heavy websites. It just slows down eventually to a standstill and the download fails. As stated when the router is not connected the above items pop up or download reasonably quickly through the modem. We have moderate speed DSL.
View 1 Replies View RelatedI have a Dell Latitude D530 - I am only able to,download at a speed of 2.95 while I can upload at nearly 7,My PC that is attached to the same provider will,download at 7.84 and upload at 7.96.
View 7 Replies View Relatedgetting process to upload my website on WWW Server?
View 1 Replies View Relatedevery couple of minutes my internet stop sending data but the downloads keep running, i can see it in my net meter, my skype get disconnected, online games too, this happen specially between 11 am and 9 pm, i know that my isp during pick hours is most probably the problem, but my friend that lives close dont have this problem with the same isp. is there anything i can do to solve this?
View 1 Replies View RelatedFirst this is my setup, i have a 100x100 mb fiber pipe at a location i am working at. i am comming out of a cisco fiber router to ethernet. i am coming straight from the fiber switch to the computer at a 1gb connection. So my problem is when i try to upload to my ftp server via windows explorer i can never get about 1.5mb, but if i upload via command prompt it goes at about 60mb upload, so the pipe is good. So you say why dont you just use the command prompt, well i have specialized gear here that run xp emmbedded and it does this via the windows explorer. I have tried 4 other computers and they all do the same thing. I tried a UDP video stream and worked at over 10mb stream. but all the ftp uploads cap out at 1.5mb.
View 3 Replies View RelatedMy broadband seems to have stopped uploading data. I run broadbandspeedchecker and it shows download of 8 and then upload doesn't work at all and shows 0.I can browse some pages, but don't have full use of all pages like my CMSA admin, can log into my hosting using FTP, but can't access directories, Skype doesn't connect.Even stranger is it all works for a few seconds, even connecting Skype, but then stops again.I have completed a few system restores going back a week before the initial problem and still no joy!
View 7 Replies View RelatedBasically i'm an employee of a Pro-Gaming team, and as a Job I stream games live, as well as upload game videos to youtube. I've been encountering a problem for a month or so now and had little success of fixing it, which is costing me quite a lot of money and viewers! Basically, I use a program called Xsplit to stream to a website called Twitch.tv (no-one else i've spoken to has the problem I have). I will randomly disconnect/reconnect instantaneously which puts my stream down for 5-10 seconds at a time, then goes back up again. Ultimately the viewing experience is ruined by this and I am on the verge of being replaced!The problem can occur either once a week or once every minute.. it just does it whenever it wants. I have 200mb/10mb internet so my upload should in theory not be an issue.
Things I have tried and done so far:
- Replaced the Ethernet Cables.
- Replaced the Routers.
- Bought a Network Card to try as opposed to my Motherboard port.
- Reformatted my computer and installed a different version of Windows 7 multiple times.
- Spoken to Twitch.tv and Xsplit about their programs as well as used multiple versions of the Xsplit client.
- Spoken to my ISP who say everything is fine.
Region : Australia
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_121123
ISP : BIGPOND
My problem is whenever I upload anything, my modem disconnects. My USB Dongle is a Telstra Ultimate 3G Sierra Wireless AirCard 312U. The problem is not present whenever I connect the dongle directly into the USB port on my LapTop.
I have a DSL connection with AT&T. It is rated at 6Mbps / 768Kbps, but it closer to 4Mbps / 600Kbps. I have a speed stream 5360 connected to the DIR655. Devices on my network are primarily wireless and include; several laptops, a desktop (which is wireless n), a couple phones / Ipods and a Wii that I watch Netflix on.
I do a lot of Photography and a handful of video work, and backup / share everything online. When I am uploading photos, even with "conserve bandwidth" turned on in the uploading application, browsing sites is very slow, but reasonably functional. If I try to upload a video to YouTube, I can barely manage to do anything else the entire time it is uploading. I've tried to plan and run all my uploads overnight, but then Netflix is unusable when I want to watch it at night.
I've tried several different things, first off, with getting the Wii to function for Netflix, I turned on the QOS engine, for the IP that is assigned to it, and set it to priority 1 for all ports. I also have a entry in the QOS engine for SSH on port 23 with a priority of 10 because of how laggy my SSH sessions are. I do not have any other entries in the QOS engine, is that a problem? Should there be entries that cover other services and assign them a lower priority?
I have enable traffic shaping and Automatic uplink speed turned on. It measured the uplink speed at 695kbps, which is pretty accurate. I have Automatic Classification off, and Dynamic Fragmentation on. WISH is enabled also. I'm set to mixed n, g, and b, I'm not positive, but I do think my older laptops only use wireless b.
Even more importantly than the Netflix would be to allow me to use the Internet in a functional manner while I am uploading, that would solve a lot of problems. It seems that the uploads just hog every last bit of upload bandwidth and don't want to make room for even the small requests that one needs to send to view a web page.
We have 4 computers that all run new versions of Windows 7. Each have been connected to a Mapped Network Drive and they all connect fine to the network. Dragging files throughout windows works fine. When we try to attach a file from the network in the browser (as in a GMail message) or upload a file with FTP it disconnects us from the network and from the Internet.This only happens with 2 of the 4 computer.
View 2 Replies View RelatedI am having difficulty uploading files on the internet because the speeds are so slow. My download speed is 23.88 MBPS, bu upload is .3 mbps. This seems to be a recent problem. The other computers on the network get upload speeds of 5mbps and do not have any problem, so I think there is some problem unique to this computer, and not a network problem. I can't back up my files because the speed is too slow.
View 8 Replies View RelatedRecectly we replaced Cisco 2100 Series LAN controller to Cisco 5508 Wirless LAN controller , I downloaded WebAuth Bundle from my Old LAN Controller ,when i am trying to upload to my New Wireless LAN controller ,its not uploading and also it gave me uploading failure error message .
View 2 Replies View RelatedEmail: when I try to send an email with an attachment (pictures/other files) it starts sending and stops suddenly at around 50-100% I repeat trying to send it and it works after a while. The larger the file size the harder it is to complete and send. 0.5mb is easy to send but over 1-2mb is very difficult.When it stops I get this error message after a min or so.Sending of message failed.The message could not be sent because the connection to SMTP server smtp.googlemail.com timed out. Try again or contact your network administrator.Online: The exact same thing happens on Facebook and other websites uploading gets stuck and times out but does work sometimes.
View 2 Replies View RelatedI have an issue with slow downloading and uploading on u torrent with my wired router linksys BEFSX41. I thought it may be because I didn't set port forwarding on the specific ports the u torrent use.
But every time When I try to set new port forwarding rules on my router's control panel its asks me for a password and user. Although I know this password and user it will keep asking me about them without saving the new port forwarding settings.
I got f9k1001v3 (n150) router, My problem is that I can't upload photos from my xperia p wirelessly. I tried to other connections (wifi) even on 3G and I can upload on instagram or fb.
View 3 Replies View Relatedi tried to create a customized web-authentication page that will re-direct any user to the web-page once they are connected to the network.
The problem is, i just cant attach/upload the image of the logo into the customized web-page (welcome/login page).Been researching about it, found and tried some clue bout it on cisco documentation, but still can't solve the problem.
Cisco document :Catalyst 3750 Switch Software Configuration GuideCisco IOS Release 12.2(52)SESeptember 2009
switch version :WS-C3750-48TS
show flash :2 -rwx 12305677 Mar 1 1993 01:27:03 +00:00 c3750-ipservicesk9-mz.122-52.SE.bin3 -rwx 131 Mar 1 1993 00:17:25 +00:00 log.text5 -rwx 3254 Mar 1 1993 00:01:01 +00:00 config.old8 -rwx 113 Mar 1 1993 03:24:33 +00:00 pass.htm9 -rwx 1088 Mar 1 1993 03:39:18 +00:00 login.htm10 -rwx 113 Mar 1 1993 03:21:30 +00:00 fail.htm11 -rwx 104 Mar 1 1993 03:25:32 +00:00 expire.htm12 -rwx 856 Mar 1 1993 00:05:19 +00:00 vlan.dat14 -rwx 2479 Mar 1 1993 01:25:05 +00:00 web_auth_logo.jpg16 -rwx 1048 Mar 1 1993 00:01:01 +00:00 multiple-fs27 -rwx 1053 Mar 1 1993 02:18:34 +00:00 webauthpage.html38 -rwx 6551 Mar 1 1993 01:19:33 +00:00 logotest.html
following is my running configuration :Building configuration...
Current configuration : 4205 bytes!version 12.2no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname Switch!boot-start-markerboot-end-marker!!!!aaa new-model!!aaa authentication login default group radiusaaa authentication login line-console noneaaa authentication dot1x default group radiusaaa authorization auth-proxy default group radius!!!aaa session-id commonswitch 1 provision ws-c3750-48tssystem mtu routing 1500authentication mac-move permitip subnet-zeroip
[code]....
I use in my network Linksys 4200v1 (newest firmware) and Sipura SPA 3000 ( 3.1.20(GW)firmware) and SPA 122 (1.1.0(011) software version as my phone adapters.My voip phones are working great until I start to download or upload some files, watching on-line tv.How and where should I set up above routers to have the same great quality voip while uploading and downloading at the same time?
View 4 Replies View RelatedI previously had a Linksys WRT54G, before I upgraded to my new router I was getting quite good signals and my internet speed on my pc was ranging from 3.7 - 4.5 Mbpsfter upgrading to a Cisco Linksys E4200 based on the great Cnet ratings, my internet speed has plumetted to a range of 2.5 - 3.1 Mbps and the Signal Strength on my wireless connection has gone to "Very Low"I have checked the channels of the surrounding routers (using a software called network stumbler). I am using channel 1 which is not being used by anyone else.I am just surprised, I thought my speed and connection strength would sky rocket after getting such a good router.
View 8 Replies View RelatedI recently installed a high speed fibre optic internet in my house. The speed is 20 mbps... When checking the speed at speedtest.net,every other device in my house gives around 17-19 mbps but my desktop shows only 2mbps.. What is the problem??
View 14 Replies View RelatedI have a Win7 64bit laptop connected to my home network by both 85 mps Netgear Powerline and wifi. On the network are mt BT Homehub router and an Iomega Home Media NAS. when trying to backup photo files (5+ mb) from laptop to NAS I find the write speed become so slow as to be unuseable via Ethernet.
Speeds (Mbps) obtained:
Write Read Connection
8.5 8.9 wifi
0.2 13.8 ethernet & wifi
0.2 14.5 ethernet
I have tried upgrading firmware (currently 2.040) but the NAS seems unwilling to do this. I have also reset the router -- all to no avail.
I ran an xp computer for a long time, in WoW i had a latency of around 100-120 which wasnt that bad. Now I built a computer with Win7(64bit) and the latency varies from around 250-370ms.
View 6 Replies View RelatedI recently built my first PC:
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz, Intel64 Family 6 Model 58 Stepping 9 (overlcocked to 4.1)
Processor Count: 8
RAM: 16339 Mb
Graphics Card: NVIDIA GeForce GTX 670, -2048 Mb
Motherboard: ASUSTeK COMPUTER INC., P8Z77-V PRO
Antivirus: avast! Antivirus, Updated and Enabled
But I have been having major issues with internet speed. I browsed through the forums and, as a result, updated my LAN driver with the latest driver for the Intel LAN Driver V17.3.0.0
I have the virgin media super hub with up to 60mbps download but rarely get over 20 and even then the download of webpages seems glitchy... on evenings it is terrible with 0.5 to 1.5mbps being the norm.The problem is also affecting Chrome which struggles to render maps and stream videos such as 720p videos on youtube even when I have a tested connection of 30ish. I usually resort to using Explorer, reducing videos to 360p or even 240p.I've reinstalled Chrome a few times but still no change.
What is going on??I also have an old Dell Inspiron laptop which works brilliantly with the fast internet - where the speed of the hardware is the only limiting factor.
I recently purchased a 20ft Ethernet cable to speed up my internet connection. On wireless, I would download files at about 2 MB/s. On wired I get 1.5 MB/s. Is it supposed to be like this
View 1 Replies View Related