I have a DVR connected to my router.I have viewed the cctv over the net before using this setup, but I think I need a DNS service so that I can use IE to log in remotely? The free one I signed up to before wants money - I only need it for a few days while i am away
View 3 RepliesI am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies View RelatedI am trying to setup Internet based CCTV system on a router that has a VPN network in place. Am i able to forward the Media and Web Ports to the router without interfering with the current VPN settings.
View 4 Replies View RelatedStrange one this - I have had this working for ages but after power cut it stopped! I have networked my home Avtech KPD675 DVR via my Belkin router. I can get live pics on my home desktop PC via Internet Explorer (Port 80) and via my dyndns address. I also can get both of these live pics away from the site on a remote PC.However, in my home network, when I use my laptop (wireless connection) I have full access to internet etc. but when I try to log in to my DVR via Internet Explorer, or the client software, I get login error and no pics!I thought it might be a firewall problem as I use different antvirus/ firewall (Virgin) on my laptop, so I temporarily switched off the firewall and still could not get pix!!
View 8 Replies View RelatedI recently purchased a CCTV System and linked it to my LAN.I use a Netgear DGN2200 Router and link from the CCTV DVR using Ethernet over the Socket Ring, (again using a Netgear product).I want to access the DVR over the internet and seem to have used internet based advice and got confused. Do I have to contact my ISP and pay for a Static IP? I am on BT Business Broadband and they say I need to pay 5pm to have a Static IP, but Port forward.com indicated that this is not necessary to set up a Static IP, and "watch your ISP doesn't try and sell you one." url...I am not clear on whether the Router needs to be linked statically to the ISP or does my PC???
View 14 Replies View RelatedBasically I set up a CCTV at my shop and I can access it remotely through LAN only (an IP was supplied so I can watch it on a pc), but my problem is I don't want to watch it on the LAN pc as it is at the shop so that is useless but I want to be able to watch it at home is there anyway. Is there any way I can assess that LAN IP online at my house maybe a VPN?
View 7 Replies View RelatedI currently have 6 CCTV cameras in my house, which are physically wired to a DVR. I can view these cameras through a monitor using DVI out. However, I would like to be able to view these cameras from anywhere I can access the Internet. The DVR that I have has an Ethernet port. Do I need to host a server to stream these cameras online, or can I simply connect the DVR to my router and then access the router through a static ip?
View 3 Replies View Relatedrecommendation for a PoE-compliant (802.3af) 10/100 ethernet switch suited for the following use. A client wants a separate [from their data] network dedicated to their new IP CCTV/IP Intercomm system (Stentofon ISO5 Cleanroom Certified). Total of 15 devices, all of which support PoE, 11 of which require it. The intercomm system will be the primary method of communication with personnel inside the clean space, so it must have minimum downtime.
1) 16x RJ45 (Only 15 devices -- anything over 16 ports is waste, SFP/expansion/combo ports not required)
2) *All* ports 802.3af PoE compliant, approx 5W load.
3) 10/100 (Gigabit not necessary, there's only 2 cameras and voice traffic is compressed)
4) Prefer rackmount but not necessary
5) Prefer Cisco/Cisco SB simply because I trust 'em (have an IAD and switch going strong for years with no downtime )
i have a cctv with sound in my shop but when i am viewing from home cant hear sound very well at it is distorted
View 2 Replies View RelatedI have a PC that runs cameras covering the access to my house ( due to an earlier incident where someone thought my stuff would look better at their place ). It has been running fine with XP and a VIA C3 box for years, but the mobo died and so my woe begins...I have slapped together a D510 box with W7 32 Enterprise, but cannot get it to network properly. ATM it is propped on my dining table with Cat5 threatening to trip someone up, so I'm not really the flavour of the month in the house.
Regular file sharing ( looking at docs, pics, etc. ) is not a problem between the house PC and the CCTV box ( bidirectional ). The old CCTV box was controlled remotely using VNC with great success, and I was hoping to continue in the same vein. Unfortunately VNC cannot connect from the house box to the CCTV box, but will work the other way when initiated from the CCTV box, not very practical. UVNC will not work in either direction and will not loop back to itself, and Remote Desktop does not work either. Error messages are "server running as application" for UVNC and server unavailable ( words to that effect ) in VNC. Remote Desktop just times out. Firewalls on both machines have been off and on during testing with no apparent change. There is a Netcomm ADSL2 4 port modem that ties them together.
It should work, it did work, so I know it can work, but networks are not my strong suit so I am throwing it out for input here. I have been banging my head on this particular rock for about 10 hours and half a bottle of bourbon and it is 00:49 local time, so forgive me if I have failed to include the crucial nugget of information that will unravel this mess.Where should I start, or is there a no-fuss remote control software option for Windows 7 that I need instead?
Unlike most DVR's, this particular model has a 4-Channel RJ-45 input (others normally have analog BNC video inputs) this is achieved since the cameras come with video baluns which make use of ethernet (RJ-45) wire.can I have such a set-up without using a DVR, instead I would channel 4 cameras to a wireless router with 4 RJ-45 inputs? From there maybe I could connect it to the internet for remote viewing or to a home network for better streaming / saving video recorded into hard disk?
View 6 Replies View RelatedI am in kuwait and I have a CCTV camera in Philippines. It is setup with IP 112.200.216.88:3130. I can ping it but I am unable to connect through browser. I am working behind a router. Anything I need to do on my network in Kuwait to be able to connect to it?
View 2 Replies View Relatedafter being able to see the cctv on the local network and remotely, we are simply not able to connect remotely again. This happens several hours after leaving site. The clients ip seems to be unchanged from last time, and we do get a " resource online but isn't responding to connections attempts" message from IE8. The ports have never actually shown as open from online port verification sites, but again, we were able to see the cams via 3g and from another town just fine.And we can see them on the locally. I'm convinced it has to be some setting on the router relevant to port forwarding.
View 3 Replies View RelatedI've been working on this for several days with no luck.I'm trying to setup CCTV DVR Security Cameras in my Barn/Garage. I am getting a good wireless signal from my home with an Alfa wireless usb adapter AWUSO36H connected to a Alfa router/Repeater R36, using this as a hotspot for my garage/barn. The house has a Time Warner
Cable Ubee Modem/Router.
[code]...
if i want to run my CCTV software from my office 1- how to connect to home network ?? should i use VPN ?
if yes : kindly tell how to configure both office PC and my network at home
if no : is there another technology (free one , easy to configure....)
I want to know how could I configure a Router Cisco DDR2201v1 for watching my CCTV System from anywhere with a internet connection. I already try to open a port in the NAT virtual server configuration but it didn't work.
View 1 Replies View RelatedI have a Kguard H264 CCTV system installed that is connected to my BTHome HUb 2 via ethernet cable.The CCTV system is registered on the home hub and has a direct ip address of 192.168.1.100 and is configured to forward port 80 which is correct.Problem is how do i now connect to the CCTV system outside of my home network i.e. using my work computer?
View 4 Replies View Relatedmy laptop only has hdmi port and my tv only supports s-video and scart connection but i've an old pc that has s-video connection and i was wondering if i can "send the screen" from my laptop to my old pc via lan is there a way of doing that at high fps? remote desktoping works but it's very slow.
View 2 Replies View RelatedA website that I usually go to has all of a sudden stopped working for me. It is hackforums.net which I know is up because I have been on it outside of my home network. Every computer on my network will not allow me to go on hackforums.net . I have not added it to a firewall or anything. I have even set my router back to factory default and it still won't let me view hackforums.net from inside my network.
View 6 Replies View RelatedI can't view a specific site from my machine, but can from 2 others on the same network. Tried both IE(8) and FF(4) and still no luck. Running Norton AV and disabled.still no luck. Flushed DNS as well as rebooted. Still no luck. Was able to access at will 3 days ago, but not now.
View 1 Replies View RelatedI have a Dell inspiron that is about 3 years old. About a month ago I wanted to connect to a wireless network, but there were none visible. I was in a coffee shop where I know there was a strong signal, but nothign showed up. I checked with a friend who was with me, and not only was he connected, he could see 5 other networks in the area - I showed none, even though when I put my mouse over the icon in the lower right of the try, I got a message that there were wireless networks available.Even at home, where it connected automatically, if I clicked on view wireless networks, ny own network that I was connected to wouldn't even show up.
View 19 Replies View RelatedI want to keep my documents on my XP SP2 machine, but be able to edit them from a windows 7 laptop. Points so far:1. I can print from windows 7 to XP OK.2. Before I re-installed XP this was working fine.3. The workgroups match4. I can see the XP files on the windows 7 machine5. When I click on an XP file on the windows 7 machine, it goes very slowly, then gives a "Not Accessible" error.6. I have not used passwords to set this up.
View 3 Replies View RelatedWe have two different groups in network say 'A' and 'B'. My network is B. I can view the computers in my group simply by clicking "view workgroup computers". I wonder how I can view the computers in group 'A'
View 2 Replies View RelatedI am having some trouble trying to connect to a different network. It seems when I click connect to a network there aren't any networks listed. Now, I know there are networks available near me because I have connected to them before it just seems that now some service or setting is disabled on my laptop that is preventing me from viewing other networks near me. Not sure what it could be but I have tried figuring it out and I couldn't.
View 3 Replies View Relatedin another location from my desktop that is only using my wired network, or do they both have to have wireless? I say this cause under those conditions i noticed that with my net book next to my desktop i am able to share files with one being wired and the other being wireless.
View 1 Replies View RelatedWhen i first set up my wireless i could see it but couldnt authenicate and connect.I was using fire fox as my browser. I could also see my neighbors network. I downloaded internet explorer and now i cant see either one. i have a program calle dconnectivity doctor and it can see both networks. Iam not a computer whiz .
View 1 Replies View RelatedWhat changed on my Win XP wireless network connections, but I used to be able to see about 5 wireless networks in the neighborhood, including mine. Now it only shows mine. Not that I can connect to any of the others (don't have the security codes), but I find it strange that it used to show all of them, but all but my own have suddenly disappeared. Did I check some setting somewhere (that I can't find now) saying to show only the strongest connection?
View 1 Replies View RelatedI recently changed webhosting partners for my company's website. With the Change I can view my company's website from inside the LAN but can outside of the LAN.
View 1 Replies View Relatedcan view other computers but i cannot access them. i have 2 vista machines one xp and one windows 7. ive tried different hubs, switches and routers. wired and wireless.
View 14 Replies View RelatedI've just setup my router and dvr system. I have my DVR wired to a Linksys E1200 router. At home view by using url....it then prompts me to log in and voila I can view. I tried setting up the port forwarding although I'm not sure if I did it correctly or not. I got onto my routers webpage. Went to "applications & gaming" Named port, selected both, put in DVR's ip address and clicked save. Came to work and tried to view it and I just get the "cannot load webpage" page.
View 18 Replies View RelatedI have just started using D-Link 655 router and ATT DSL connection at home. There is an internet signal. Skype is working. But I can't open any sites. Ie tried typing hotmail, Google, anything - sites do not open. Ive tried to plug in the Ethernet cable directly into my laptop and I get the same result sites don open.
View 7 Replies View Relatedwhen any user logs into LMS #1, GUI says "user not authorized to view devices". All of my users are set to "full permissions" so it seems to be some disconnect here. I'm using ACS for auth, that seems to be working OK. I have a second system LMS#2, setup exactly the same, which works properly, all "full permission" users can access all device menus.
View 1 Replies View Relatedwe have installed a new appliance of LMS 4.2.2 in our VmWare environment. The platform is running licensed to work with 1300 devices. We have approximately 500 devices in DCR, most of them are small switches ranging from Catalyst 2950 to Catalyst 3750, and also a bunch of Nexus 5548 switches.CiscoView is not working for any of them, we get an error message which we cannot interpret. We have updated to the newest possible device packages, but all to no avail.
View 2 Replies View Related