I haven't lose my installation CD but windows media player tells me that it is blank. I am currently using my wireless router in unsecure mode . I have a WNR 1000v2. I have a relatively new HP now, but I don't remember if I had this with my last, a Lenovo. In any case I was not able to install this a secured.
View 1 Repliesi lost my netgear cd my pc crashed
View 1 Replies View RelatedNetgear wnr2000 download driver
View 1 Replies View Relatedi have a wnr612v2 router from netgear. is there a way to control and limit the download speed ?
View 1 Replies View RelatedAccording to the Time Warner website, my Road Runner Turbo with Power boost is capable of download speeds up to 15 Mbps, which seems to be far surpassed by all wireless routers. So what are the benefits of routers such as the Netgear WNR2000 and beyond with speeds up to 300 Mbps vs the Netgear WNR1000 with speeds up to 150 Mbps?
I'm more than willing to spend more for increased performance, but don't fully understand what benefits I'll see by dropping more than about $40 on something like the WNR1000.By the way, I'm in a two bedroom apartment and regularly have two laptops, a PS3, and Droid X connected to the internet.
I've been experiencing some problems with my RangeMax wireless NETGEAR router (model WPN824) in terms of wireless connectivity. When directly plugged into my router (i.e. using ethernet cables), the download and upload speed (in mbps - megabytes per second) appear to be working correctly, where we register average download speeds of 15-19 mbps, and 1.99 to 2.07 mbps for upload speeds, as shown on speedtest.net. However, our wireless devices (i.e. laptops and Nintendo Wii) are not picking up the same download speeds, but the upload speed is fine. The problem is that the download speeds of the wireless devices are comparatively low, where speeds of 2.5 to 5.5 mbps are a commonality.
We've tried resetting the router (pushing that small button at the back of the router, using a pin) and have a new 10-character key password. We've also tried simply unlugging the power cable to the router, with disconnecting lengths of about 10 seconds to over a minute for separate attempts. It is also worth noting that the router occasionally disconnects and re-connects on irregular intervals, and we have many wireless devices attached to the router (though many of these are not in use and are very often disconnected from the internet, so I do not think the router is being overwhelmed).
I am currently paying for 30 mbps downloading speed and 2 mbps with respect to uploading, though the 30 mbps downloading speed will likely only be registered if directly connected to the black box (modem). As such, values of 10 to 18 mbps for downloading speed for a wireless device would be considered "normal". Why would our wireless devices not pick the correct mbps download speed? Is it possible that there is a setting on the NETGEAR SMARTWIZARD page (192.168.1.1) that is preventing this?
Im having a horrible problem with my internet connection where I cannot use any kind of download site such as filefront or anything really.The main problem is once a download gets going (any filesize above 1MB) the connection will stall out and stop downloading until the server says cannot download or if available, i pause and start the download again. Its very frustrating having to babysit downloads or be unable to even complete one ,My router is a netgear N150 WNR 1000.
View 14 Replies View RelatedI get on-line, and the internet all-of-a sudden starts to show that I've downloaded my limit of 250MB. Now, I am on Hughesnet for internet service, can not get on DSL, wont happen already asked. Now, I am running a router, only way my wife and son can access the internet. They have laptops windows 7 and build-in Wireless Cards. I have a desktop windows 7. My updates are scheduled in the morning hours about 5AM so their is no reason for the computer to update. Same goes for my wife and son, their are set for early morning hours as well. I get an error message as soon as I click on my webpage that I want to browse, Internet Can Not Display The Webpage or something to that effect.
View 8 Replies View RelatedI lost my Cd for the router. I have the Linksys WRT54GS V7.2. It works if I hook my computer & x-box up to it. But the problem I'm having is not being able to make it a secure network to keep my neighbors from pinging off of my internet. I know when they come home everday without looking out my window. My connection goes from great to I'm not sure my page is ever going to load. This just started when they got two or more laptops.
View 1 Replies View Relatedwant to download software to wireless router
View 2 Replies View RelatedI usually get a solid speed of 2.3MBss yet today I am getting only 500kb/s I have reset my router 3 times, and my computer twice. Why is it happening?
View 1 Replies View Relatedi lost the the cd software and i would like to down lowded on a new cd
View 1 Replies View Relatedi have a laptop that i connect through our wireless router with, and for the past couple months my download speed have been terrible. my browsing speed is just as fast as it always was when i am connected to our router, just incredibly slow if i try to download or stream something.however, my downstairs neighbor also has a wireless router set up that i can access which gives me incredible download speeds but my cant even browse the internet because i the browser connection times out.i have tried plugging directly into my router to on the thought that perhaps the 2 routers' wireless was somehow interfering with each other, but my download speeds are still *** even then.
View 1 Replies View RelatedI have been searching for about 2 days now about this problem and have tried almost everything I can think of to fix it but none seems to work Okay so I have a ISP package for 55 Mbp/s Down and 3 Mbp/s Up but when connected to the router either lan or wireless I am speedtesting at about 15 Mbp/s. I have called the cable company, they had told me that my signal was fine blah blah, I insisted the guy come out and still look at it so he did and on that day it just decided to run at the advertised speeds. I am running a WNDR 3400 Netgear V1 Router. I have tried changing MTU Size.
View 11 Replies View RelatedWhen I connect directly to my dsl modem, I am getting better than 5 megabits/sec. which is what I should be getting for download speed.When connected thru the router, I am getting about half of that.My wireless connection speed is 54 megabits/sec, so that is ok. I cannot get any connection when I hardwire the connection from the pc to the router too.
View 4 Replies View RelatedAsking about Packet Tracer. I currently use packet tracer 5.3.2.Can you give me any link where to download router template on packet tracer? I want to explore cisco 2821 but packet tracer 5.3.2 has an existing of cisco 2811 only then, I tried to add the 4 ports of RJ11 but I cannot see the 4 port telphone.
View 4 Replies View RelatedI have a RCA modem from comcast high speed internet.Also have a Linksys Cisco Wireless-N Gigabit Router model # WRT310N V2. When I connect the internet directly into the computer, I get download speed up to 21.07 mbps and upload speed of 3.07. When I connect through the router download speed 1.31mbps and upload speed of 1.01.I have no clue how to make changes to the router.
View 19 Replies View RelatedI am on a point to point internet connection that is rated at 2mbps. With my PC connected directly to the modem or through an old Airlink101 (model AR680W) router typical DL speeds are 1.9 to 2.4 mbps. However the Airlink router has to be reset 2 to 3 times per day.
I am trying to replace this router, however every router I've tried cuts the download speed in half (about 0.9 to 1.3 mbps). So far I've tried two Ultra Speed wireless N routers; two D-Link DIR 615's; and one Linksys E1200. When I talk to their tech support after testing they say that the routers must be faulty, but what are the odds of getting 5 bad routers from 3 different manufactures.
My IP does not know of any compatability issues with any routers.
where to change version of windows I can not find where to change the version of my windows to make it compatible with my router..I know that there is a place to change it,but I can not find it...I have Windows XP and it is compatible with my wireless router.
View 3 Replies View RelatedI am getting very slow download speeds on my wireless router (Linksys model#WRT160N). I measured it on speedtest.net. with my ASUS laptop, ASUS Transformer Prime tablet, and 2 Ipod touches. All similar speeds.
-Download avg: 1.30 Mbps
-upload avg: 6.20 Mbps
I measured my desktop speed that is hardwired through the router to the modem.
-Download avg: 30.00 Mbps
-upload ave: 6.20 Mbps
I have scanned all the wireless connection in my area and found them to occupy channels 1, 6, 11. I tried changing my channels one at a time for all 11 channels. Some did a little better than others but not a lot. Also, if I buy a dual channel router, can all wireless devices pick up on the 5GHz spectrim and if so, could this alleviate some interference? Is it possible that my router is going bad and a new single channel 2.4 GHz router will be fine? jasonmac73 has chosen the best answer to his/her question.Click here to view the answer that was selected.
Don't have CD. Where do I download this on Dlink site?
View 3 Replies View RelatedI was just online when all of a sudden i lost connection. I have a WRT54G V8 and did a quick little browse and found out it could be corrupted firmware. When i download the firmware it wants to download as a .bin file and open VLC Media player!? How do i change this or what do I need to open it with?
View 7 Replies View RelatedV2.0.26.124551 is now available. I did the online upgrade and it took just a couple of minutes including the reboot. The firmware is not available as a download yet for manual install. This firmware is dated 11/14/11 so it doesn't appear to correct the Port 53 issue reported earlier.Release Date: Nov 14, 2011 Firmware version: v2.0.26 (Build 124551) - Support for the WAN L2TP and PPTP protocols
View 1 Replies View RelatedI had my Dir-655 router for over a year & this is is a first.My firmware is 1.21 & I only use my router for gaming when I'm not on my PC for home use. I have only one PC in the house that is not shared, I have also not downloaded any virus or maleware.So the past month I decided to buy a wired ethernet cord to connect to my gaming systems rather than using the wireless option to get an extra bit of speed. That has been working fine up till yesterday when all of a sudden my download speeds dropped from around 20Mb down to barely 1Mb down (I can't even get the speed test site to fully load anymore). The upload & ping remains unchanged though. Only my Download speed is being affected. This is both when I'm on the PC & when I'm online gaming.
I unplugged my D-Link router & plugged my modem directly to my PC & I got back the 20+Mb speed, so the modem or cable company are not at fault (I even called them to see if there were any problems on there end).
-I tried turning off my Firewall on my PC.
-Resetting & rebooting both my modem/router/PC.
-using different DNS numbers.
-using /flushdns.
-using /Iprenew.
-Messing around with my router configurations such as:
turning off QoS Engine.
turning off wireless.
turned of MAC filtering.
unchecked "Add DHCP Reservation".
unchecked SIP.
None of it worked. I'm still browsing at around 56k dial up speed for the past day+!I read up on the internet for similar problems, but the only solutions I saw was turning off the firewall on the PC, but that hasn't worked at all.
I need to reinstall my WRT54GS but can't find the original disk. Is there someplace I can d/l the install software? I can find the firmware updates but I think I need more than that to install the router.
View 8 Replies View RelatedI have been using a Lenovo W510 laptop with an Intel wireless adapter (Intel(R) Centrino(R) Ultimate-N 6300 AGN). The download speed has been 15-18 mbps on my home network. I just bought a new Lenovo W520 with a Lenovo wireless adapter. The download speed is about 1 to 1.5 mbps. What changes should I make to the router settings so that it communicates properly with the Lenovo wireless adapter?
View 9 Replies View RelatedWhere can I download the 2.0.36 firmware?I flashed it through the UI but since the factiry fw is crap I want to try the third party firmware that are available but I want to make sure there is a path back to factory version in case I need to return the product.
View 1 Replies View RelatedI was playing with the router/gateway settings on my WRT54G v3.1 router.... and I managed to hose it. I tried power cycling/ resetting it will not route my traffic through anymore...although i can still get to the setup menu.I am trying to download the firmware to flash it but.
A) the site says that for this v3.1 router I need to use the ancient firmware 4.21.1 and
B) the link to the firmware does not work !!! it downloads an empty zip file url...
linksys support, if you are listening, please restore the link to the firmware so I can try and fix my router.
I have searched the forums, and can see that I am not the only one with speed problems on this router. When I changed from a D-link dir-615 (yeah, no wonder I changed it ) my download speed dropped from 4-5 MB/s to 1,3 MB/s. I'm using a wired connection. Have tried disabling QoS in router settings, did a firmware upgrade, reset the router. You see, when I do speed tests on the internet I get 40-50 mbits download, 25-30 mbits upload. I have tried many different files to download, both torrents and through my browser.
View 2 Replies View RelatedI'm using for a company network a 2801 Cisco Router. This router has 2 FastEthernet Interfaces connected on 2 ISP's and one VLAN for internal users. What acl should i use if for example one client from the lan is using a torrent client to download from the internet. I want just to specify a maximum download speed or to block that client to access the internet when it's trying to download something that can affect other clients from the LAN.
View 2 Replies View RelatedI've been searching in google on how to block IDM in my router D-Link DIR-655, i need to block this application because we have a large network here in our office, and i found out mostly of our users when i check have a IDM installed in thier pc and its affecting our internet connection.
View 13 Replies View RelatedI have a Belkin N300 router. When a computer is hard-wired to the router, I get about 26Mbps, but all of the wireless devices in my house are limited to about 56kbps. I tried logging into the router to see if there was something "choking" the connection speed, but nothing really jumped out at me. Is there a setting of some kind that could be causing this?
I do have a signal repeater since my house is so big, but there is nothing within those controls that would seem to have that kind of effect either.
I am getting very slow download speeds on my wireless router (Linksys model#WRT160N). I measured it on speedtest.net. with my ASUS laptop, ASUS Transformer Prime tablet, and 2 Ipod touches. All similar speeds.
Download avg: 1.30 Mbps
upload avg: 6.20 Mbps
I measured my desktop speed that is hardwired through the router to the modem.
Download avg: 30.00 Mbps
upload ave: 6.20 Mbps
I have scanned all the wireless connection in my area and found them to occupy channels 1, 6, 11. I tried changing my channels one at a time for all 11 channels. Some did a little better than others but not a lot.Also, if I by a dual channel router, can all wireless devices pick up on the 5GHz spectrim and if some, could this alleviate some interference?Is it possible that my router is going bad and a new single channel 2.4 GHz router will be fine?