WRT54G Half Of Network Is Invisible?
Jan 26, 2011
2Wire 2700HG-E-Gateway is my main modem supplied by my ISP)from there it branches off to two seperate areas.Section One consists of 2 wireless connect laptops, both Vista, and one hardwired desktop, XP. All of these can see eachother and share files, printers and run just peachy.Section Two is hardwired straight from the 2Wire 2700HG-E-Gateway over to a Linksys router, WRT54G. From this router i have a destktop computer, XP, a xbox 360, and a ps3 all hardwired into it. All 3 of these devices can find and interact with eachother. They all connect and run internet fine also.Now my question is, how can i make my section 2 units be discoverable by section one and vise versa? I have fiddled with settings in my linksys settings but i just cant get it to work. Currently the linksys is set to gateway instead of router, i thought it would be an easy fix and change it to router but when i do that i lose internet on all section 2 devices. Now i have a basic understanding of networking but when it starts getting into changing numbers and ips and subnet and that stuff i get lost.
View 5 Replies
ADVERTISEMENT
Oct 27, 2012
I have 2 computers( 1 main system and a laptop) and a WDTV live. They are all on the same network and same workgroup. But I cant see my main computer and WDTV from my laptop's network.I can ping it but not see it on my network list. Why is that? My windows firewall is off. I use avast and malware bytes.
View 4 Replies
View Related
Jan 27, 2012
How to see those contacts that they are online but they are invisible in his yahoo messenger.
View 1 Replies
View Related
Mar 18, 2011
i want to invisible my router ip.which command can do this.or how can configure registery to hide my router ip and surf safe.
View 5 Replies
View Related
Jan 13, 2011
My wireless became invisible to my laptop for no obvious reason while I was working on it. I thought that router has broken but it seems to work fine for other laptop in the same room and for my blackberry.My laptop can see other networks in area but not mine.The problem is that we share wireless with this office and router itself is not accessible to me. They don't want to unplug it and the plug it again or reset because of the risk for office. Doesn't seem to be my laptop's fault.I have tried a number ip adressess to access router remotely but none of them work. Is there a program I could download to access it remotely? Also, I have no idea what kind of router it is. It says BT Fusion in its name.
View 3 Replies
View Related
May 24, 2011
My friend is invisible to ping requests. I know he is online because he is on my Gtalk friend's list. This is because he is using Windows 7. Earlier, when he was on Win XP, he responded to ping requests. He said that he didn't mess with the firewall settings. Therefore this feature comes default with 7.I'm using XP and I don't want to change to 7 right now. Can I get this feature?
View 5 Replies
View Related
Feb 9, 2012
I'm configuring an 1140 and trying to make it invisable to any user that doesnt know the SSID. The SSID is not broadcast, however my clients see "Other Network" in their list of available networks. Short of turning off the AP is there any way through the 1140's configuration to prevent this "Other Network" from showing up in the clients available networks list.
View 2 Replies
View Related
Dec 11, 2011
i have a wap 200 access point very good performing in strenght of wireless signal but also a big problem....i wish to configure it with a userid and a password but connecting my pc at the access point by ethernet cable found wiith access point and typing 192.168.1.254 to view welcome page of device and start configuration, nothing happens...it is "invisible" for my and others pc.
View 4 Replies
View Related
May 31, 2011
Note If you configure VPN, the client dynamically adds invisible NAT rules to the end of this section. Be sure that you do not configure a twice NAT rule in this section that might match your VPN traffic, instead of matching the invisible rule. If VPN does not work due to NAT failure, consider adding twice NAT rules to section 3 instead.
View 2 Replies
View Related
Apr 3, 2012
I've had the VPN client operational on my Windows 7 32-bit laptop for many months without issue, but suddenly it became invisible. Launching it, there is no GUI displayed. When I click on the taskbar icon, nothing, click again, nothing. That said, when I know it should be visible on the screen in the foreground, I can press enter and get the default connection to connect! I can see status, log window, About, but no main window. It's there, but perfectly transparent or something. There is no other monitor or shadow monitor it could be hiding on, nor is it shoved off to a periphery of the display somewhere. I have completely uninstalled and reinstalled the latest version. I'm not aware of any display related updates to my machine.
View 5 Replies
View Related
Aug 16, 2011
I have a crappy router/modem from comcast with two windows machines and a linux web server connected. I also have another router, a Linksys WRT54G with DDWRT firmware with WAN connected to the modem/router. The linux web server has a static IP, configured with /etc/network/interfaces The network goes down randomly. Disconnecting and rebooting the linux web server usually fixes it. It's possible that the WRT54G could be at fault as well.The problem is that I just don't have any information on what is happening on the network. (Well even if I had the information, I'm not sure I would know what to do with it) I installed wireshark, I figure I should just leave it running until the network goes down, then I can go through the packets and see if I see anything weird?
View 4 Replies
View Related
Sep 7, 2011
My internet's falling out every half an hour, I'm having this problem for a long time and I'm getting really annoyed by it. It's always out for an average of 3 seconds. The reason this is annoying is because I'm a gamer and these dropouts cause me getting kicked for being unable to connect and such.
View 5 Replies
View Related
Sep 18, 2012
A few days ago I sent my ISP an email and a few days later they called my house and talked to my mom about the support issues I had addressed with slow speeds. They directed her to www.att.com/speedtest and our internet speed was reading 6MB/s down and 512kb/upload as it should be.The problem is, outside that test I am not seeing the performance. Let me put it to you like this, right now the internet is so slow that Speedtest.net consistently gets errors when trying to connect for a test. Any website that isnt text based like say Reddit, takes ages to load. Youtube videos? Streams? Forget about those, 240p buffers as slow as 720p.When I finally manage to get Speedtest.net to do a test after numerous internet resets I barely crack 1MB/s down IF AT ALL, and .12kb/s upload IF AT ALL.
Its maddening. Its actually affecting my siblings college work as their online tests have been failed due to disconnecting.Something I should have mentioned earlier is that I do have a router. Its a Linksys WRT54GS with the latest firmware. Something that is also annoying is that when I plug my internet directly into my computer, it wont work, but if its plugged through the router it works just fine. This has never happened and its making me draw a blank.AT&T support suggested the we upgrade our Modem to one of the newer ones that are a modem/wireless router combo which we plan on doing. Right now we have a Speed stream 4100 that weve had since we got the internet in 2006 and I guess they don't even make them anymore.
View 1 Replies
View Related
Mar 7, 2012
Router Starts at full speed 300/270/243, jumps around a bit. Then around 5 minutes speed is cut in half 130 Mbps. I tested it out for 2 hours rebooting it, and in almost exactly 5 minutes the speed is cut in half every time. Is my router bad? Or is the good neighbor policy just going into effect? I do have a lot of traffic, I am in a apartment, but I use a free channel
View 3 Replies
View Related
Mar 23, 2013
I have been using a D-Link DIR-600 for a couple of years now. And I haven't had any problems until maybe a couple of months ago. It all started with my internet just kind of dying (mostly in the eavnings) and not working until i rebooted the router. So I call my internet provider and they tell me to update firmware and to plug the internet straight into my computer instead to rule out everything at their end.After some time I manage to update firmware. Problem with internet sill remain but is not as frequent. I left it like that for a couple of weeks, but earlier this week i checked my connection speed and it says i have only 50mb/s after the firmware update. Since i had the weekend off I plugged the internet straight into my computer and get my full internet speed at about 90mb/s. After plugging in the router again I only get around 50 again.
View 3 Replies
View Related
Oct 4, 2012
I have a DIR-615. My cable connection is 10M and my upload velocity it's about 800K.
If I plug my cable modem right through to the computer, the upload velocity it's 800k indeed.
But when I access the internet through the router plugged on the cable modem, the velocity drops down to 400K.
That is a big problem for play games like fifa. I have a huge delay on the commands and I think that it's caused for the low upload velocity.
View 3 Replies
View Related
Apr 18, 2011
I'm a Cisco newbie and I'm in the following situation:
1>The router (867) must connect to my ISP in 1483 bridged (2684 bridged) mode, LLC, VPI/VCI 0/35
2>WAN IP will be assigned by ISP (DHCP)
3>No username and password required to establish the connection
4>MAC-Cloning is advised, not required
5>Firewall behind 867, WAN IP should be assigned to WAN interface firewall, connection established by 867
6>867 router will be used as a switch, so no NAT required. NAT will be setup on the firewall
7>Connection type: Analog (annex A)
The required setup can be fixed by configuring the 867 in half-bridged mode, but I don't no how and I don't know exactly how to config the 867 in bridged mode.
First, it's even hard to setup a good bridged config.
version 15.1no service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryptionservice sequence-numbers!hostname router1!boot-start-markerboot-end-marker!logging buffered 51200logging console criticalenable secret 5 ****!no aaa new-modelmemory-size iomem 10clock timezone GMT 1clock summer-time GMT date Mar 30 2010 1:00 Oct 26 2035 1:59!!no ip source-route!ip cefno ip bootp serverno ip domain lookupip domain name domain.local!!!!username admin privilege 15 secret 5 ***!!ip tcp synwait-time 10ip ssh time-out 60ip ssh authentication-retries 2!!!!!!!interface ATM0 no ip address no atm ilmi-keepalive!interface ATM0.1 point-to-point pvc
[code].....
View 10 Replies
View Related
Jul 20, 2011
I have an old metal-walled mobile home that I plan on converting to a combination shop and man-cave; it's about 200 feet from my home's computer room, where I have a Netgear WNDR3400 wireless-n router. The only place in the trailer where I can "see" my home network is the kitchen window, and I thought about putting a Wi-Fi repeater there to extend the home network into the trailer. But I have read that using a repeater will cut the network's Wi-Fi throughput in half -- which would not please my wife and daughters back at the house. Is there a simple, relatively inexpensive way to extend the network to the trailer without slowing everything down? Eventually I may have Charter install a separate cable hookup there, which would allow a separate high-speed Internet connection too. For now, I just want to "share" Wi-Fi to the trailer.
View 6 Replies
View Related
Feb 15, 2011
Just got a new 10M circuit installed a few days ago and noticed that when doing bandwidth tests I am getting 9.85 down but only 4.5 up. I plugged directly into the isp's adtran with my laptop and I can hit 10/10 consistently. Not sure what's causing the ASA to get half upload speed. I set the interface speed and duplex to 100/full so I set it back to auto/auto. Thoughts? See config below. We aren't doing any QoS on it.
View 19 Replies
View Related
Jul 7, 2012
my acer laptop is only showing half the graphics when on my email pages a small band of the emails and the top half blank son i have to continually scroll up to read the e mails the screen is fine on every other page?
View 1 Replies
View Related
Mar 6, 2012
if I have a half duplex 10 mbs connection, is the max speed to download a large file 5 mbs or would the download tend to hog the channel direction?
View 9 Replies
View Related
Nov 18, 2011
I am working on setting up a Linksys router for my Dad. I am moderately competent with networking. Anyway, a glaring, and obnoxious problem I am having is everytime I load a page for the router(192.168.1.1), it does not completely load and I have to hit refresh.Now when I try to change the router settings from DHCP to PPPoE, it reloads the page, for whatever reason, and because this router wants to be irritating, it only half loads the page, so I cannot click the "save settings" button.This is what has been done to the router after being reset(red button on the back held in for 10 sec):I turned on the modem, and plugged directly in to make sure I had internet connection.I plugged the modem's ethernet into the "Internet" port on the wireless router.And finally, I plug an ethernet cable from my computer to the 1st port on the wireless router.Nothing else has been changed. I have not turned on any ridiculous settings. This half-loading router pages is driving me up the wall though. I cannot even troubleshoot the wireless connectivity because I cannot make any changes.
View 7 Replies
View Related
Sep 18, 2011
My computer is currently wired to the internet, but I'd like to make it wireless. I already have a wireless router and PCI card. The problem is that the wireless internet cuts my speed in half. Is there a reason for this? Is wireless inherently slower?
View 4 Replies
View Related
Apr 27, 2011
I have a shop about half mile away from my wireless network at my house. I need/want wirless internet in my shop. I have a egenious ap/bridge model EOC2611P that is linked to my home network at my shop to my house. I have internet through the cat5 cable coming out of the bridge but having issues connecting that to the other wirless router. The second router is a linksys e1000. I live out in bfe so no network security seince my closest neighbor is a little over a mile away. I have dissabled DCHP on the linksys and thats where my knowledge stops. I know it can be done but how?
View 5 Replies
View Related
Aug 3, 2012
I noticed my wireless connection was decently fast for my needs which was 13-15 up /5 down. I am in the next room from my study and around <10 ft away from the modem in the study. However today the internet was extremely slow for everyone in the house so I went to reset the modem. After resetting the modem I noticed that the internet speed went a bit up and so I used speedtest.net to see how fast the connection was in the study. The computer in the study is connected with a ethernet cable to the modem. I was amazed that the speed in the study was nearly double the amount. I understand that wireless connections are undoubtedly slower than a wired connection, but is it normal for the speed to drop by half when I am <10 ft away from the modem?
View 1 Replies
View Related
Aug 12, 2012
So its the 3rd day of my nightmare to set up this cisco ADSL router...
Status:
Setup:
DSL connection:
So I live in Ireland and im on Smart telecom ISP, Basicly the internet is half going - like skype is going and i can chat with my contacts, cisco.com page is going but really SLOW, google.com page is going until search, speedtest.net page is going until the mesure thing facebook loads like in 10min.. a lot of pages dosent even go...From main telephone socket to the router is only 2.5m telephone cable(NO HOME PHONE) so no splitter or extension... (Changing the MTU dosent change anything...only if i set it on auto then w7 shows that internet is connected, skype works but no pages at all is loading and is dropping with timeout error.. if i set to manual then something loads on pages...) The cisco connect software does NOT do good because I can go until the username/pasword step, I input THE CORRECT details but he just sayes that he cant authenticate the username & pasw... and so i cant get past that step and the programm is no good.... only way is to set up with 192.168.1.1!
View 4 Replies
View Related
Nov 29, 2011
I am only getting half of what my internet speed should be when I am connected to the router.
when i connect to the modem directly from my pc, I have 50-60 down..
View 2 Replies
View Related
Jan 13, 2013
I recently made an old router into a repeater by using DD-WRT. It seems to be working fine if I use LAN, but I cannot get WLAN to function properly. When I go to add a virtual interface and all the proper info, I all of a sudden cannot connect to the Internet. More specifically it seems to not assign me an IP address.
View 1 Replies
View Related
Jan 16, 2012
I am on a point to point internet connection that is rated at 2mbps. With my PC connected directly to the modem or through an old Airlink101 (model AR680W) router typical DL speeds are 1.9 to 2.4 mbps. However the Airlink router has to be reset 2 to 3 times per day.
I am trying to replace this router, however every router I've tried cuts the download speed in half (about 0.9 to 1.3 mbps). So far I've tried two Ultra Speed wireless N routers; two D-Link DIR 615's; and one Linksys E1200. When I talk to their tech support after testing they say that the routers must be faulty, but what are the odds of getting 5 bad routers from 3 different manufactures.
My IP does not know of any compatability issues with any routers.
View 3 Replies
View Related
Jun 29, 2012
i am having a very wierd problem with my current internet connection , Its wired and while accessing websites seems just fine .. Accessing ANY program on the PC that requires internet does not work .. Examples of those can be steam/origin/any messenger/skype/teamviewer/teamspeak and the list goes on.. They all act like i dont even have an internet connection. I tried pinging in CMD by using Ping Google and i always get a request timed out .. I have also tried tracert Google and after the three * * * Its always a request timed out as well.. I have no idea whats causing and its pretty annoying as i mainly use the internet for skype and steam, Also on a side not this is not a problem with my laptop as i tried connecting to some random unprotected network that was near me and it worked fine
View 5 Replies
View Related
Feb 17, 2012
url..This says an ISR G2 3945 can achieve 502.78 Mbits when CEF fast switching. Is this per port or total for the whole box? Since the router will hold dozens of switch ports and several gig routed ports I don't understand what this half gig switching speed means.
View 5 Replies
View Related
Jul 16, 2012
Cisco RV016 MultiWAN router.I have it connected in a small business setting with about 70-80 devices. Network is: 2 x DSL Modems. RV016 Router...Cisco 300 Series Switch - >3 more cisco switches connected...AP's.Running a 192.168.0.0 network.The web interface is down half the time. The router needs to be reset in order for me to access it again. Usually the login page appears but when I try to login the page does not leave the login area, only a small spinning icon beside the login area.Sometimes the page for DHCP status cannot be accessed and a reset is all I can do to access the router again.
Internet seems a little slow at times too.We were running the Netgear FVS336G before this and I wanted to move to the RV016 and have capability of more than two WAN's, plus have everything Cisco of course.
View 2 Replies
View Related
Sep 28, 2011
Howto set ports from WS-C2940-8TF-S to full- and half-duplex 100Mbit?
View 1 Replies
View Related
