I have a laptop using a wireless Ralink USB card to connect to the internet. Is it possible to use the unoccupied Ethernet cable slot to hardwire into a router and use the router to send out the wireless signal picked up by the USB card to other devices?I know I shared my connection like this to my xbox 360 but wasn't sure if it could be used with a router.
View 1 RepliesHow can I find my IP Address number on my wireless router. I'm trying to connect my blue-ray player for the Netflix.
View 1 Replies View RelatedI have just purchased a new ASUS Laptop for my wife.We are currently running two destop computers on a D LinK Router. How do I go about including the new computer on the network wirelessly?What do I need to purchase to make the transition easiest? The two desktops are running Windows XP Professional, the new system is Windows 7.
View 4 Replies View RelatedI'm going to be moving into a place in the next couple months where I'll have to go wireless on my desktop (until now I've just done Ethernet so I don't even have a wifi card on my desktop). The router/modem aren't anywhere near my bedroom so my gear will be going wireless from now on All my devices are built-in wifi ready but not my desktop.
I would like recommendations as to a rock-solid, reliable, fast and well performing card as I can to make up for no hardwired connection. Especially with BF3 coming out I'm not all that thrilled with being forced into this situation but you gotta do what you gotta do. Anyhow, I'll be bringing my router (Netgear WNDR3700) so I'll have the range and speed from there about as good as I can get, so I'd like a card of equal merit.
One side note...probably not really feasible considering I want speed and performance as a priority, but I would love a card (if possible) without bullshit antennas sticking out of the case, or with external antennas you have to set up on your desk. I will go that route if I have to but man that is an aesthetic nightmare, IMO. The ones that stick out of the back of the case are the worst looking for me just as a caveat.
My roommate has a HP pavilion that she has been trying to connect to our internet, and while it seems to be connecting to the network, it wont connect to the internet.Its running Vista, and I tried all the repairs that it prompted me to try, but could not resolve the issue.I know it isn't a internet problem, because the desktop is hardwired and we have two xbox's that connect wireless with no problems.Im not sure what info I should have included in this thread, but its my first post and wasn't sure what I needed to put.
View 12 Replies View RelatedI can follow directions and am fairly tech-savvy, just don't have the time to troubleshoot this stuff and run my business. Here's the rundown:Router:Cisco Linksys E1000 V2
-working fine until I unplugged to move it and plugged it in
-verified with tech support the problem is not physical
-right now, am hardwired to the router, which is hardwired to the cable modem, and connectivity is fine through hardwiring
-no luck through wireless - this is the error message I get:
This webpage is not available:The server at www.google.com can't be found, because the DNS lookup failed. DNS is the network service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Google Chrome from accessing the network.
I have a win7 desktop upstairs with all of my media on it.I also have a winXP laptop that I would like to use as a media center running xbmc connected to my tv downstairs.I have set up a workgroup so my laptop can access the media stored on my desktop and everything works great when they are both hardwired to my router (Linksys E3000).However, as soon as I unplug my laptop from my router and switch to the wireless connection I can no longer ping my desktop or access the shared folder (internet still works fine on the laptop, it just cant see my desktop anymore).If I plug it back in to the router, everything works again.
The exact error message I get when I try to access the shared folder is "\INFINITYMedia is not accessable. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. [code]
Im trying to optimize my E4200 settings and Ive noted that ping and download speeds are extremely slow for the internet service I signed up for. Ping speeds are consistently more than 1000ms and dowload speeds typically are less than 3Mbps. These are for both wireless and wired connections to the E4200 router.
When I disconnect the router and hardwire my laptop directly to the the modem, ping speeds are less than 100ms and download speeds are 20Mbps.
Simply put, webpage loading is at a snails pace with wireless and wired connection the router, but blazing fast when hardwired directly to the modem.
On a seperate issue, the iMac I have is also **bleep** slow even when hardwired directly to the modem. Is there an obvious router setting Im screwing up? Router is updated with the latest software.
In my main office, I have a cable modem which is connected to my main E4200 router. All of my equipment (except my Ooma) is served by the E4200. The E4200 broadcasts a wireless network.In my basement, I have a Wii / entertainment center. The E4200 signal from upstairs isn't strong enough to stream video.
I bought the WET610N and have successfully set it up to interact with the E4200 wirelss network. I can hardwire my laptop to the WET610N and verify the internet works greatHowever, the Wii must connect over wireless. I have other equipment in the basement which would benefit from an internet connection. So, I want to A) connect the ESXS88W 10/100 8-port workgroup switch I have to the WET610N *AND* also broadcast a wireless signal in my basement (assuming the wireless network I see in the basement is the same "old" one from upstairs which has not benefited from the WET610N).
How can I set up my WRT54G2 to broadcast a wireless signal in the basement so that it leverages the E4200 signal served by the WET610N, while also having the workgroup switch offer hardwired connections to my other equipment (like Dish Network receiver)? It doesn't seem to work by just plugging the WRT54G2 into the workgroup switch.
I think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies View RelatedWin7, wrt54gs,
It works sometimes. I imagine it has a noise problem since sharing files works, internet works. I cannot remember how to change channels on this router to save my life, though. What is special about sharing a printer?
does my router have to be hardwired into my modem in order for my router/ computer setup which is located one room over from the cable modem
View 1 Replies View RelatedI recently bought a router with 300+450mbps dual-band connectivity. I have a computer and am looking into buying a wireless n adapter. Should I buy a 450mbps-capable card? They cost much more than 300mbps cards and I'm not sure if the price difference is justifiable if current devices won't saturate all of the bandwith. Also, will a 300mbps card slow a 450mbps network down to "only" 300mbps?
View 2 Replies View RelatedMy wireless router is a cisco linksys e3000, and I was wondering what the best wireless desktop card would be?
[code]...
I have a Linksys WR-110 wireless router that has been acting up lately. I have 10mbps cable internet and have my desktop computer hardwired to the router. I notice that after a few days the download speed gets down to the 2mbps range. Verified by { URL}. If you do a hard boot (unplug for 30 seconds) it will go back to 10mbps speed again. But it seems after a few days it slows own again.
I always run speed test to verify, and it always runs back up at advertised speeds once i hard boot.
Why would this be happening?
I recently purchased a Linksys E1200 router. I have two desktops (Windows XP) hardwired into the router, one of which is not connecting at all.I have talked to Linksys tech support 3 times already and they have not been able to fix the problem. Pinging a website got a request timeout.Pinging the router got a good response.It was properly assigned an IP address, but did not connect through the router.Under Network Connections, it displays as "Connected" but is still not able to access the Internet.
View 2 Replies View RelatedI purchased a Linksys EA3500 about two months ago, brought it home and set it up with my DSL provider and everything was great, until sometime last week, and since then my download speeds have just plummeted to basically nothing. I did some troubleshooting but I cannot seem to find what the issue is. I have checked all the cables etc, and I know that it is definitely something with the router itself..My current Speedtest.net speeds are as follows (I am paying for a 5mb connection) with the EA3500.Ping of 15ms Download speed of .67mbps, Upload speed of .60mbps.When I remove the router and hook straight to the DSL modem I get the following results.Pink of 12ms Download speed of 4.89mbps, Upload speed of .60mbps
- I have tried to reset the router both by holding the reset button and through the configuration application.
- I have enabled and disabled wireless to see if that was slowing things down
- I have plugged in my old WRT54G and I get the 12ms, 4.89mbps,.60mbps results on it (so I know its the EA3500)
- I tried putting the computer in the DMZ
- I have changed the ports that the computer is plugged into
- I have disabled and enabled IPV6 on both router and network card
- Firmware version - 1.1.38.134141
have a dell inspiron 1545 with windows vista. Sometimes at coffee shops I cannot connect to the internet. It says that I have local access only. This also has happened when I use my hardwire internet connection. Then at times it does work on the same network. It is not a network problem as I can connect with my iphone or other devices.
View 14 Replies View RelatedI was told that i need to disconnect from my wireless and hard-wire the connection directly from my modem. My wireless connection is downstairs in the basement. Do i need to call a professional to do this or is this something i can do from home?
View 1 Replies View RelatedThe Dell Laptop was working on wireless, now wont connect to internet, not even if hardwired to modem desktop, the wireless signal under laptop status reads 100%
View 3 Replies View RelatedThis past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies View RelatedI currently have a netgear 600 router transmitting both 2.4 Ghz signal and 5 Ghz signal but my laptop can only receive the 2.4 Ghz signal. My question is should I purchase a 5 Ghz signal wireless card and does the benefits outweigh the cost?
View 1 Replies View RelatedJust built my new system and when I installed my network card drivers and utilities, a message comes up ASUS Wireless LAN card is taken apart from your desktop PC.
View 1 Replies View RelatedIntel wireless adapter card doesn't recognize wireless network - computer says card is ok
View 1 Replies View RelatedI got my wife a new laptop in October, and it runs on windows 7, since the 25th of december she has been having connectivity issues with her wireless card. She had 2 bars on her signal strength, and I wanted to take the signal strenght out of the equation, so I got a N range booster to put in the room she is usually in, she now has a signal strength of 5 bars. However she still loses connection to the internet.
ISP is Bell Fibe 25 Router is the bell modem/router in one. My son's Laptop goes in that room, and has no issues. I have made sure the drivers are up to date on both the router/modem, and on the laptop itself. The only thing I cna think of is that it is the card itself that is faulty.
My only issue at the moment and im not sure if im doing something wrong but the wireless card is Intel® Centrino® Wireless-N 1000 and it says it can do Wireless N Connection but im not able to get it connected to the wireless N network. When i go in to view the options it gives for Wireless Mode it says B/G or just B or G. Now up top it does say 802.11N Mode and has the option for Enable and Disable and its Enabled. I have uninstalled the driver and intel software and reinstall everything a few times but no resolve. How i need to get the card to connect to the N Network?
View 5 Replies View RelatedI have a two year old Dell, an XPS Q740 (from the system info) Intel i7 CPU. Works fine but I've recently upgraded my router to an N standard with dual channels operating at 2.4ghz and 5ghz, so I'd like to improve the the network options for my machine. Looking at the device manager, it says I'm using an Intel WiFi link BGN 1000 which operates at 2.4ghz.
What card if any I can install to bring about a speed improvement. Fiber broadband is also due in my area soon so I want to take advantage of this.
When I plug my laptop up to our modem, all i get is local access. IPconfig gives me to default gateway or dns suffix. Naturally there is no wireless. My roomates laptop runs fine wired or not and we have the same set up.Not sure what to do.
View 12 Replies View RelatedI have tried using Google and Yahoo! Answers to get an answer without much luck.But basically, what is the advantage (if any) of having 2 or 3 antennae on a PC wireless network card instead of just 1?
View 2 Replies View RelatedHe's getting a error saying Unidentified Network. After letting fail windows troubleshoot I got 2 errors. The first was "The default gateway is not available, the second was Local Area connection doesn't have a valid ip configuration. Here's what Ive tried so far.I tried in safe mode. Ethernet works here so I assume is a software issue?Uninstalled and reinstalled the drivers. disabled and enabled, nothing..I tried going into configure network card and giving Network Address a random 12 digit value and that failed.Ive tried updating the drivers but I cant because Dell wants me to their download manager into the computer that has no internet to download the drivers /facepalm..I basically ran out of ideas. This is a Dell Studio laptop. It has 2 network cards a wireless and a Ethernet, the ethernet card is a Realtek PCIe GBE Family Controller, The wireless DW1501 Wireless-N WLAN Half-Mini Card
View 5 Replies View RelatedI have window 7 64 bit with amd phenom 840 and msi 880 gm series. I installled d link dwa 525 wireless pci card. Window recognises it but cannot create a network or cannot connect to other network.
View 4 Replies View RelatedI don't know if this is even possible, but can I change my wireless network card from 802.11b to 802.11g mode?
View 3 Replies View RelatedMy friend has a dell d600 with the built in intel wireless card. All of a sudden his computer no longer shows that there is a wireless interface in the computer and he needs this computer for work. I'm thinking the driver may need to be reinstalled but I'm not entirely sure if it's that or a hardware error that's causing this malfunction.
View 3 Replies View Related