Automatically Detect Proxy Settings?
Oct 1, 2011
In my company certain site have been blocked, they were using CCProxy to limit the accessDuring those times i would just choose automatically detect proxy settings and i would be able to get connection. But now they have done something advanced and Now i cant access internet without choosing the manual proxy, also no other applications(Like Torrents) gets internet connection. The Network icon shows a warning sign with a mouse hover text no internet access. But some of the seniors are getting complete access
View 1 Replies
ADVERTISEMENT
Nov 26, 2011
I am running Windows 7 and I use a ZyXEL ZyAIR G-220 Wireless USB adapter for internet. I had a virus called something like Cloud AV 2012 so I used Malware Bytes to remove it and it worked just fine. However, now the internet does not seem to work (there's that yellow triangle with the exclamation point) and when I try to run diagnostics, the message "Windows could not automatically detect this network's proxy settings" comes up. So far, I've tried rebooting, disabling proxies in all of my browsers, and running scans, And I also cannot system restore, because apparently windows security was turned off and there are no restore points
View 1 Replies
View Related
Oct 20, 2011
I'm on windows 7 btw.When I diagnose the problem it says: Windows could not automatically detect this networks proxy settings I'm connected to the internet via cable on my laptop. Yes I'm using a router. The other computers connected to the router can connect to the internet but mine can't. It also says "unidentified network - no internet access" when I click on the computer icon in the bottom right corner of the screen. until I downloaded from a music site which gave me the virus I think. Now, I'm not certain if the virus is removed or not. I tried system restore point but it won't even let me restore my computer anymore for some reason, maybe because of the virus.
View 19 Replies
View Related
Jan 5, 2013
I'm using my old laptop now. On my regular laptop, my internet icon has the yellow triangle and when I trouble shoot it, the message says "Windows could not automatically detect this network's proxy settings".Recently I noticed my computer was heating faster (and hotter) than usual so I ran a search again and it said no threats were found. I have ran the search twice since then and still nothing. I was advised to use ccleaner,malwarebytes, and Super Anti-Spyware. It removed one other threat but the problem was still there. I then started using combofix, but I did not like the look of it so I stopped that scan. It seemed a little sketchy. As of this morning, I'm having the internet problem. My old laptop (the one I'm on now) and my girlfriend's laptop work fine. I connected it with the Ethernet cord and that didn't change anything. I have Windows 7. It's on a 2010 Samsung (I'm not very tech savvy so I'm not sure about all the other details).
View 14 Replies
View Related
Apr 20, 2012
The other day i was on my mums laptop (ASUS X5DIJ) at her house all working fine the battery died so i plugged it in and started it up again however the charger cant have been fully connected and once back in windows the battery died again on the next boot i noticed windows said it had found the system CMOS/real time clock and had installed drivers for it. checked the driver details it says no driver files are required just like it should ever since then it connects to the network but will not connect to the internet at her house or at mine through wireless and ethernet cable although all other computers work fine windows troubleshooter says "Windows could not automatically detect this networks proxy settings"
I've tried
resetting routers and laptop = no change
netsh winsock reset and netsh int ipv4 reset = no change
ipconfig /flushdns = no change
ipconfig /registerdns = no change
[code]....
View 9 Replies
View Related
Jan 1, 2013
sometimes my net will randomly dc and wen i trouble shoot it says "windows could automatically detect this networks proxy" and then when i go to diagnose it says "your computer appears to be correctly configured but the device or resource (dns server) is not responding.
View 17 Replies
View Related
Jan 6, 2012
the virus is no longer a problem. Now, I cannot get the computer to connect to the internet via wireless OR wired connection. The computer will connect to the router and I can see other computers on the network, but I continue to see the warning triangle that says "No Internet Access." When running the diagnostics on the connection I receive "Windows could not detect the networks proxy settings."
View 2 Replies
View Related
Jan 4, 2011
laptop message says cant detect proxy settings
View 5 Replies
View Related
Sep 5, 2011
I'm using CentOS 6 in a virtual environment. When cloning a virtual version of CentOS, the old eth adapters are "removed" and replaced with new ones and net MAC addresses. However, the ifcfg-ethn files still exist. I am trying to figure out how to get CentOS to automatically rescan & recreate the network adapters / eth files, just like it did on install. url...
I know there is a quick way to do this in the GUI, but we are using a server so GUI does not apply in this case.
however Kudzu has been removed as of Centos 5 so I would rather avoid that. There is a procedure that Linux runs on initial install - what that is so I can manually trigger it?
View 6 Replies
View Related
Oct 20, 2012
how to connect proxy to my youtube.
View 1 Replies
View Related
May 30, 2013
I have an Ubuntu 10.04 and basically I would like to achieve this:When I am at home, switch the network to use static IP.When I am at the office, switch the network to use DHCP.
Is there a program to do this?Or is this something that should go inside an init script where if it is weekend or weekday from 7 pm to 7 am, then consider it a home. If it is home, then use static IP.?
View 5 Replies
View Related
Jun 11, 2012
I have a new Dell Inspiron 14Z (purchased in February), it has been running great until recently, the internet connection (wireless) completely stopped working.When I try to connect through Internet Explorer, it says Internet Explorer cannot display the webpage. I Diagnose Connection Problems, and this is what I get:"Windows could not automatically detect this network's proxy settings." On Chrome, I got a long list of things to do (check DNS settings, LAN Network, etc. have tried every and all checked/unchecked box they advise.) This error shows up:Error 105 (net:: ERR_NAME_NOT_RESOLVED): The server could not be found. However, I accidentally uninstalled Chrome trying to fix this problem, so Internet Explorer is all I have.It's been about 2-3 weeks with no internet. Have tried connecting to 5+ different networks (Home- AT&T U-verse, University of Texas Network, restaurants, etc)tried restarting my computer, setting my LAN settings back to normal, and it still won't work. Other computers work on all of the networks I've tried, it's just mine that wont. [code]
View 13 Replies
View Related
Feb 6, 2011
I have a Dell Inspiron and it had a virus that didnt let me get into anythihng I took care of the virus, but now when I go to internet explorer it says I cant connect (I am connected to the wifi) so it tell tells me something about tools-internet options-connections-LAN settings, but I have no idea how to fix the proxy settings?
View 1 Replies
View Related
Mar 27, 2012
I open the IE, it takes about 3 minutes to open up.Its says at the bottom left corner "detecting proxy settings". I went to Tools>Internet Options>Connections Tab>LAN settings> and unchecked Automatically detect settings, but still did not work.
View 3 Replies
View Related
Sep 20, 2012
A few hours ago, I just restored my laptop to factory settings. Once it was done, I tried connecting to the internet but the computer could not detect ANY wireless networks!I already know it is not the modem or router because I have a Macbook Pro and two HP laptops that connect perfectly fine to the modem. I also made sure the wireless is on. The laptop with the problem is a Toshiba Satellite l645. It's running on a 64-bit Windows 7. When I try to look up wireless networks, it only shows 'MOBILE BROADBAND CONNECTION".
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersNguyen Family>ipconfig/all
Windows IP Configuration
[code]...
View 4 Replies
View Related
Mar 17, 2013
Region : Germany
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.26 Build 130129 Rel.59449n
ISP :
all my systems are configured under "IP & MAC Binding". Binding is activated globally and all check marks for every ID are set. After i finished my configurations, the "ARP List" status shows, that everything is bound - so far everything is great. The problem appears after a router reboot or after shutting the router down and powering it on again. The "ARP List" then shows only a few of my IDs and their status is unbound. I need to go back to the "Binding Settings" and hit "Save" - after that all my IDs appear in the ARP-List and everything is OK again.
View 3 Replies
View Related
May 28, 2012
I would like to connect devices to my network so that their traffic passes through a proxy running on my computer. I figured the best way to do this is by setting the proxy on my router to the one I am running, but then I would need to have another connection to the computer running the proxy or else there would be an infinite loop ?? something like that. so:
Internet -> router (1) -> my proxy on comp A -> router (2) -> computer B
View 1 Replies
View Related
Mar 31, 2012
I access the internet from my company�s LAN, which has a restrictive firewall, so I cannot request the admin to open any ports manually for me. Hence I use a software called your-freedom. This proxy software supports both http as well as socks 4 and 5 proxy (by entering the proxy IP 127.0.0.1 (localhost) and Port 8080 for http proxy OR 1080 for Socks Proxy), and I have successfully been using web browsers and some other softwares that support proxy/ allow proxy info to be entered to login/ connect to the internet. Your-Freedom also supports port forwarding.However, the softwares I intend to use do not have any options to enter proxy methods or proxy ports (as far as I have noticed). I have tried to proxify these 2 softwares using softwares such as SocksCap and Free Cap, but either they don�t work, or my settings in proxifying are not correct. I believe I will have to do port forwarding or proxify the softwares, but have been unable to do so in the correct manner.
Following is the info on the 2 softwares:
1.NOW Trading terminal:[FONT=Times New Roman]Normally when I start the NOW or Zerodha software, the software starts and I get a login screen, but under firewall conditions, I get the initial Splash screen but then the software stops with the error: [b][u]NOW Initialisation failed for Interactive Engine << os error>>.
2.PowerIndia Bulls:The software is written in Java and starts with a batch file (PowerIndiabulls.bat) located in C:UsersDEFAULT_USERNAMEAppD..... I converted this batch file to .exe (with battoexe software) and then ran it through a proxifying software. The .exe start properly without proxifying software but not under proxifying environment. Basically the software needs to connect to the internet using Port 443. I am also expected to keep ports 443, 41599 and 59598 open. software's requirement is available at Indiabulls Securities: Indiabulls Securities is a leading capital market company offering securities broking and advisory services, depository services, equity research services to its clients in India. (item no. 5).To confirm, while the software is unable to connect through port 443, you will get an error message: "Connection to Login Server could not be established" when you try to login with any random Username and Password.To know that the software is able to connect properly, you will get an error: "This User ID is not enabled to be used with this product".
View 1 Replies
View Related
Jan 8, 2013
Anyone know the differnce between these two on a MLS? Seems that proxy arp as I know it works with or without the 'local' version.
View 7 Replies
View Related
Sep 5, 2012
i just bought a new desktop and my problem is as stated in the title. I cant detect my own modem but i can detect others.
View 1 Replies
View Related
Jun 24, 2011
How to set up time automatically in DI-624. I know that is old, but I need to syncro with an NTP.
View 3 Replies
View Related
Feb 22, 2011
i am getting around 12 emails a day returned mail demon and i havent sent them my friends are gatting sick of this every time they log on
View 1 Replies
View Related
Nov 7, 2012
Why doesn't my PC automatically log into my wireless network when I turn it on,it try's to use a BT hotspot which is nothing to do with me so I have to manually select my network and log into it.How on earth do I stop this happening?
View 2 Replies
View Related
Oct 19, 2012
I have 2 wireless dvd players. In the past they automatically connected to the network on startup.I was making adjustments on the netgear wndr3700 router while experimenting with some cameras.Now I need to use the WPS option on the dvd player and then run to the router and push the WPS button.hen it connects.
View 1 Replies
View Related
Sep 19, 2012
sometimes the ethernet led is not glowing even if the cable is plugged in. how can i resolve this?
View 1 Replies
View Related
Feb 8, 2012
Automatically some client ptr record vanishes from dns where as host (a) record exists, how can i verify from client side or how can i see logs files in client machine for the same.
View 1 Replies
View Related
Feb 26, 2011
Every time I restart my computer, it unchecks the "connect automatically" box. I have to manually connect to my wifi. I go in and check the box agian just to have it uncheck next time I boot up. My wife has the same laptop that I do and hers doesn't do this. I'm guessing it must be a setting somewhere?
View 2 Replies
View Related
Jan 9, 2013
My bootvar is set to boot up images from disk0. The 6500 series switch has two redundant supervisors.Each supervisor has a PCMCIA card with the exact same IOS images in the 0 slot. The secondary supervisor is given the disk name slavedisk0 and the primary is simply disk0
View 2 Replies
View Related
Aug 14, 2012
So I have recently bought a modem which has Wi-Fi in it..I use every holidays! When I bought the modem, I set the modem correctly by putting its CD in my PC & following it..But the last week when I opened the internet, the internet was telling that DNS server failed to look-up.. or something like that in my Google Chrome.So I put the disk in my PC.. And again I set the modem correctly by following CD's instructions..Then the internet started to work again..Now today also when I opened the internet the same manner it shows a message.. set the modem again..So my question is why is this happening ??And yea also the Wi-Fi's password setting has been also changing from WPA to Open..Is there a way to set this modem correctly.. without being setting the modem everytime.
View 1 Replies
View Related
Mar 20, 2013
is it possible that a public IP can be automatically routed to another public ip.For example I have two routers A and B. router B has a LanB in 10.0.0.0 network and the public ips are in the x.x.x.0 for internet access. router A is located at a remote location and has a public ip of y.y.y.0 network.
View 8 Replies
View Related
May 11, 2011
I coulden't visit any websites and it gave me an "error 105" something. So i tried connecting my other comp to the internet cabel with the same result. So i tried to find a solution on the web (wierless internet still worked) and stumbeld upon a similar problem were the answer was to manually fill in an adress in the "internet protocol version 4" properties in the "local area connection" properties. I then noticed that i dident have the "Obtain DNS server address" set to automatically and that the other manual boxes were empty. I then turned the auto on an i had access to internet. Is this safe? Cause i read somewere that DNS server addresess were provided by the company that provide you your internet service, and that you can be redericted to a fake website that can get a hold of your account information on it
View 1 Replies
View Related
Dec 30, 2012
I have a home network using WEP 128-bit router and my phone is Motorola Atrix with AT&T. until I did the jellybean update to android my phone connected automatically with my home wifi but now it won't connect at all. In all other placed with wifi or hotspots it connects automatically and even with secure networks it saves the password and stays connected. I tried my local AT&T store and they said all my settings in the phone were right and suggested I reboot my router which I did. Nothing has corrected the problem. The wifi doesn't stay on long enough for me to put in my password to connect.
View 2 Replies
View Related
Feb 21, 2013
I am using windows 7 OS(32-bit) and it is creating automatically the sessions and communicating with different static ip's.I have find out by using netsat -n command
TCP 192.168.3.22:50746 210.210.113.83:80 SYN_SENT
TCP 192.168.3.22:50747 210.210.113.81:80 SYN_SENT
View 3 Replies
View Related
