Cannot Access The Desktop Version Of Facebook
Dec 15, 2012
I cannot access the desktop version of Facebook. Whenever I try it says that the connection has timed out. I can get on all other sites without any problems. I tried to figure out what was wrong. I went on Cmd and pinged facebook and it said the connection was timed out. So I did tracert and after the 8th hop it said connection timed out. I tried on 2 computers and a tablet and the same thing happens. When I turn off my router and computer and turn both back on then I can get on the site once with no problems.
View 2 Replies
ADVERTISEMENT
Aug 2, 2011
So i can't access my Facebook page i log on it fine at school & I used google chrome & safari, & internet explorer and every time i log on it says SSL Error & it also says that "you attempted to reach www.facebook.com, but instead you actually reached a server identifying itself as *.vkontakte.ru this may be cause by a misconfiguration on the server", idk what to do. I did everything, cleaned it for viruses and checked the proxy & everything.
View 5 Replies
View Related
Jun 21, 2012
i cant get access to facebook from my server i download another browser that did not work, it keep saying that, well a matter of fact it don't load at all, it very slow when it click to start the page,. i did have facebook access about a week ago but i dont know hat happen why i cant access it here and said the client on the server can access facebook but i cant how is that possible?
View 1 Replies
View Related
Sep 7, 2012
I've been having this problem for about a month. When I first start my computer, all three sites load fine. After a few hours, the error page comes up stating that Google Chrome (my primary browser) can't load the page. A few weeks ago if I switched over to Internet Explorer, the sites would still be able to load. Now the sites don't load after these few hours in any of my browsers. I've done malware, spyware and antivirus scans and threats did come up, but now there are none and this keeps happening. I also did a DNS flush and it didn't work. This is my log, but my host files are being blocked[CODE]
View 10 Replies
View Related
Apr 3, 2011
My boss asked me to disable access to Facebook since most of the employees are just spending time with it instead of working. I have done this by means of Website Filter and it works. However, some people have found a way by installing Digsby on their machine, tho they're not really able to go the facebook page, they are actually able to chat with their facebook buddies. Is there a way for me to block access to the facebook API or anything Facebook related?
View 6 Replies
View Related
Feb 7, 2011
create a new proxy to access Facebook in school.
View 1 Replies
View Related
Aug 2, 2011
It works on the mobile site at times maybe twice a day but only able to access for 10 minutes maximum. I tried the command prompt and ping facebookm and noticed that I didnt recieve files back and it was just timing out is that whats causing it?
View 3 Replies
View Related
Jan 12, 2011
I have been trying to resolve this issue with only allow facebook access throug the content filter between 12pm and 1 pm. However The settings never seem to take. Is this a bug in the system? If I start the filtering from 1300 to 1200 that should allow facebook to be accessible only on lunch.
View 2 Replies
View Related
Nov 17, 2012
This problem started happening a few days ago. Whenever I try to access [URL] on my computer that's not physically connected to the router and modem, I keep getting a 403 error:
You don't have permission to access / on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Apache/2.2.22 (Unix) mod_ssl/2.2.22 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 Server at www.facebook.com Port 80 --
but I can access touch.facebook.com and m.facebook.com. If I use the computer that is physically connected to the router and modem, I can access Facebook fine. I've tried using CMDPrompt and releasing/renewing IP to no avail. I use the belkin n150 router with updated firmware and the linksys wireless-g pci adapter with v3 drivers. Never had an issue before up until now.
View 1 Replies
View Related
Nov 6, 2012
I've been using my WRT310Nv2 Cisco wireless Gigabit N router for 2 weeks now, and sometimes, it's blocking access to Facebook.comI am not aware if it does the same thing with other websites, but my guess is that if I fix this one, I'll fix them all. So here I go, I click on my Facebook icon in my bookmarks and all goes well. Then, a while after, Facebook doesn't respond anymore and I'm send to a page that says "this is probably not the webpage you are looking for!" and it goes on about someone probably trying to hack my Internet and so on. But it's impossible: my network is under a solid WPA/WPA 2 security access. So I try again and click on the FB icon, and it shows me this:
"Invalid URL
The requested URL "/", is invalid.
Reference #9.c2c28f18.1352263449.304a8c9"
View 9 Replies
View Related
Nov 20, 2011
On E4200 Firmware Version: 1.0.03, I managed to successfully set up "Internet Access Policy" (not the "Parental Controls") to set up the times when internet access is disabled for various IPs on my network.
But I could't setup a policy to block facebook.com. What I am doing wrong? See the attached screen shot. I did click the "Edit List" and apply this polity to the IP Address Range 192.168.1.2 to 192.168.1.254.
View 9 Replies
View Related
Sep 14, 2009
McAffee scan of acs 1113 appliance running the 4.2 build 124 patch 12 version reports that a medium vulnerability exists because the system has SSH version 1. Any way to specify only version 2 or turn off SSH?
View 9 Replies
View Related
May 22, 2013
I have two Firewalls one on MAIN site and another on BR site. I have configured RA VPN for both and i am able to access the internal networks of respective Firewalls. But the requirement is i want to connect to the Main site through RA VPN and access the BR SITE internal networks through that connection.
View 4 Replies
View Related
Jul 1, 2011
I was wondering if I picked up a used (End of Life) pix-515e, would would I need to do to be able to upgrade it to that latest version of IOS made for that product? Is it still possible to even get access to that version? Will cisco allow downloads for that devices IOS?
View 4 Replies
View Related
Jan 16, 2012
Can we use ACS 4.1 version recovery disc on 4.2 verison to recover the forgotten password.
View 1 Replies
View Related
Mar 11, 2013
which version of prime infrastructure supports wlc5508 version 7.4
View 2 Replies
View Related
Jan 20, 2013
I've have an ASA 5505 with a inside network vlan1 (192.168.0.0/24) - i've configured an IPsec VPN profile and a VPN network of 192.168.0.50/24. I can through my VPN tunnel access inside hosts on vlan1 - but not ASDM on the ASA (192.168.0.1). Under management i've added the VPN network of 192.168.50.0/24 to have access to ASDM, but still does not work.
View 1 Replies
View Related
Oct 29, 2012
I have a problem relating to remote access VPN configuration on Cisco ASA 5550 verion 8.2(1). I used Cisco VPN client 5.0.03.0560 with a simple topology : laptop(client) -----( Internet) ------- (IP public) ASA. Now, I can ping from laptop to OUTSIDE Interface on ASA from Internet when I connect from Cisco VPN client to ASA , I was notified log on Cisco VPN client as below: [code]
View 1 Replies
View Related
Mar 20, 2013
I am not able to access asdm via my browser. All is setup correctly that I can see. Here is my config
ASA Version 8.6(1)2
!
hostname DFB-ASA
enable password YWZBogZjbyvTSYf1 encrypted
passwd YWZBogZjbyvTSYf1 encrypted
names
!
interface GigabitEthernet0/0
[code]....
View 3 Replies
View Related
Apr 3, 2012
provide me with the important links which can show me how to do the software upgrade for my ASA 5520 ver 7.0(1) to ver 8.4 ? as well as the ASDM
View 10 Replies
View Related
May 10, 2011
i am using Cisco ASA 5510 with ASA Version 8.0(4) and memory 256MB. me to Upgrade it to 8.3
View 6 Replies
View Related
Jul 18, 2012
I have an WAP54G Acces-Point.The current firmware version on the acces point is: V1.06,Feb 18 2003 This is very old.I see that new versions are available. Only for te right hardware version.There is the problem, the harware version is not printed on de backside of the access-point.
View 5 Replies
View Related
Aug 26, 2012
My serial number on the E4200 starts with 01 - does that indicate it is a version 1? If not, how do I determine which version I have? Are there any software updates available? How do I disable my guest access?
View 1 Replies
View Related
Jun 20, 2012
Does LMS 4.1 or any newer version support Cisco Access Point 4410 N ?
View 1 Replies
View Related
Jan 16, 2013
I configure anyconnect vpn on cisco asa version 8.2. vpn user need to access internet so i configured split-tunnel. the split-tunnel working but i do not want to use split-tunnel for security reason. i want vpn user use our local network internet. how i do it?i think that i must do vpn user subnet nat and then what i need do additionally?
View 1 Replies
View Related
Dec 21, 2011
Is there anywhere I can download WAP610N Firmware Version 01.0.00 build 832? I have two units with this firmware version that work OK. I recently purchased another unit that has WAP610N Firmware Versions 1.0.01 and and can only access an IP address if I do not use any security. I also spent a lot of time on the phone with Linksys support to no avail.
View 6 Replies
View Related
May 19, 2011
The other computer running XP connects to the server through remote access but the one running windows 7 does not
View 1 Replies
View Related
Sep 18, 2011
I have a Mac G5 desktop that has no wireless capabilities. I also have a Gateway laptop for work. It runs windows 7 and obviously has WIFI. Can i connect my Desktop to my laptop to use the wifi to connect to the internet?
View 2 Replies
View Related
Oct 10, 2012
Since sometime on 10/7/12, I can no longer access the internet from my desktop.I'm connected via wired Ethernet but have also tried connecting via a USB WiFi Modem.Network and Sharing Center shows "Unidentified Network No network Access".All other machines on my home network have internet access (one other desktop as well as multiple WiFi clients).I've tried pinging the router (192.168.1.1) .. request times out.I've tried reset TCPIP and Winsock Stacks, Disabling / Reenabling the NIC with no effect.In troubleshooting, I've found a registry entry which seems to be different from that in my working desktop and which I cannot change.It's HKLMSYSTEMCurrentControlSetservicesTcpipParameters. [code]
View 11 Replies
View Related
Sep 22, 2011
i have router WRT45G ver 7 it work but when i want to access in web base utility the router reboot
View 4 Replies
View Related
Dec 10, 2011
I am trying to remove a line in a particular access-list configured in a FWSM module using this command "no access-list <acl> line 19 x x x x" but it doesn't work. See below:
FWSM/xxx03(config)# no access-list ?
configure mode commands/options:
alert-interval Specify the alert interval for generating syslog message
106001 which alerts that the system has reached a deny
[code]...
How can I remove a line from the access-list without clearing the entire access-list?
View 3 Replies
View Related
Mar 7, 2012
how can I remote in to my router and I need to get past my router to my pc desktop
View 2 Replies
View Related
Jan 22, 2011
I have A setup in different location with the the ASA Firewall with VPN enabled and a Print server. on Network B i have a server with 2008 installed and its my NAT server, DNS and File server.Now the Client on Netwrok B wants to access the Server in Network A Remotely through VPN they could connect to but cannot user Remote Desktop either its Ip translation issue or i dont know.
View 2 Replies
View Related
