Cisco RV120W / Ethernet Can't Connect Through Router
Dec 25, 2012
I am currently having issues with connecting to the ethernet through my router. I can confirm this is not a software problem becasue I have tried this on mulitple PCs and I get the same problem. Today I tried connecting my pc to the modem via ethernet and it connected without a problem at all. The router i am currently using is a cisco RV120W and is connected to the modem via the WAN port, -not sure if that has anything to do with it. Things that I have already tried is system restore on the router, unplugging everthing for 1 minute and pluging itin, flushdns and everthing else IP related on CMD. Also I should add my modem is on router mode and my router's network is seprate from the modem, also wireless is workng fine, and I have tried relpacing all ethernet cables to confirm the cables arn't broken. The IP address I recieve on devices on the ethernet is 169.254.x.)
View 2 Replies
ADVERTISEMENT
Mar 6, 2012
I have a Cisco RV120W connected to the internet. I have configured a QuickVPN user on the router, but I cannot connect via QuickVPN no matter on what PC I try (with firewall or without firewal, Windows XP, 7, ...). On the router it says the VPN user is connected, but on the client PC I receive remote gateway not responding. In the logs it says failed to ping remote VPN router. I tried changing all settings I could find on this forum, but the result stays the same (changed port to 60443, deleted all IKE and VPN policies, allowed ping, disabled fragmented packets etc...). None of all the settings seems to get any result.
View 11 Replies
View Related
Nov 9, 2011
we are experiencing truouble to connect a RV120W Router using an E1 link with RJ45. Everything seems ok when the router was configured with a static IP, also we can establish an IPSec tunnel, but if we try to use RDesktop through the tunnel, or email services with POP3, after a few minutes the router restarts, or loose any signal wireless, ethernet and WAN; also it becomes hot.
View 1 Replies
View Related
Oct 21, 2012
i had problems with my RV120w I can't connect via the Internet to my workplace network from another site,I can ping The router but can´t browse,
View 2 Replies
View Related
Jun 27, 2011
I just bought a new MSI FX720 from newegg and when I plug it in via ethernet to my router, it does not connect. Wifi connects to this router without a problem.I was at a friends house earlier today and it connects via ethernet to his router without a problem.I've also tried 3 ethernet cables through my hub and direct to my router, using different ports.
View 19 Replies
View Related
Nov 15, 2011
When i was looking for a wireless card, everyone seemed to be having connectivity issues with all of these cards, and i regularly have interference issues when the microwave is used which completely knocks off my connection. How to connect a second router as i have a telephone port in my room so i am able to connect my PC/PS3 via ethernet. Just some basic info, I'm on the O2 wireless network using their Thomson router, and i also have a Bt Homehub 2 lying about for some reason.
View 2 Replies
View Related
Jun 4, 2012
Is it possible to connect to router use crossover cable to attach with the 10Bt ethernet port on each router?
View 2 Replies
View Related
Feb 22, 2011
I bought a Philips blu ray player that has an ethernet port to connect to stream movies. My router is located on a different floor so connecting via an ethernet cable is not an option. How do I connect my blu ray player on the 2nd floor to the router on the 1st floor?
View 2 Replies
View Related
Oct 8, 2012
I'm trying to get a DS lite connected to my university's wifi, which I learned doesn't broadcast a Wireless-b signal, which a DS needs to connect. Can I setup a my own router connected to an ethernet port, configure it to boardcast wireless-b and get on wifi through that? I asked another forum which said yes, but I want to make sure before I buy anything.
View 1 Replies
View Related
Dec 30, 2012
I have upgraded my 'old' Linksys router to a new Cisco 3500 and I can only connect to the new router via Wi-Fi... When I connect using hard-wire - the computer tells me I hve no connection! Same computer works just fine w/old router
Dell Inspiron duo - Windows 7 - Cisco 3500
View 2 Replies
View Related
Jul 22, 2011
I just recently replaced an older linksys pre-N router with a RV 120W. I thought this would be a good choice as a more professional router. I installed this router last week and things seemed to be working normally for web browsing, though I was receiving more incomplete pages and broken graphics. Yesterday, I tried to watch a youtube video a friend had sent me and it would not play. I tried several other videos from youtube and other sources with the same result: stalled videos, partial played videos followed by a spinning wheel. It was late, so I figured something was going on with Comcast and went to sleep. This morning, I was trying to download Anti-virus updates. The updates failed multiple times. I then tried some videos again with the same results. I tried downloading .ZIP files from several sources, and while the file completely downloaded, each and every file was corrupted and unusable. Before I called Comcast to complain about my Internet being flaky, I unplugged the Comcast Arris TM502G device from the Cisco router and plugged it directly into my computer fully expecting the problem to persist, but the problem immediately dissapeared. The immediate evidence is that the problem lays with the Cisco Router. It appears that I can't make any changes on the Comcast device as it has a comcast public IP address and does not seem to have any web or telnet interface to change the settings.
- On the Cisco router, I disabled every non-essential service: VLAN, QOS (bandwidth profiles), IPV6, etc
- I updated the FW to the newest version the day I installed the router
- I power cycled the router
- I power cycled the comcast device
I need to resolve this issue as soon as possible, but I'm not sure what to try next, and I'm confused about my support options after trying to navigate Cicso's support pages. It offers live chat, e-mail support, etc, but everything I go into requires a contract number.
View 3 Replies
View Related
Oct 4, 2011
I have two RV 120W routers with a IPSec VPN.I have problems with VoIP traffic inside the VPN.In PIX and ASA systems I know the solution is disable h323 inspection. Possible to disable h323 inspection in a RV 120W Router?
View 2 Replies
View Related
Dec 6, 2012
I have internet through my cable company and currently use their wireless netgear router. I purchased a Netgear Router N600 but it does not have a port for the cable connection. Can you recommend the correct wireless router
View 1 Replies
View Related
Feb 10, 2012
I want to know if it is possible to put the cisco small business router rv120w into bridge mode so that I can connect it to a linksys e2500 access point. Is this even possible or am I wasting my time?I have 4 devices connected to the cisco router that I want to be able to bridge to the linksys e2500 which has the internet connection.
View 1 Replies
View Related
Mar 12, 2012
So you've got broadcast networks - Ethernet, PPP networks such as serial & T1/E1 and then youve got Non-broadcast multi-access links such as Frame relay and ATM. I understand the concepts of each. That's not the problem.My question is, is it possible create a broadcast network (Ethernet) but also connect a router to another router via a PPP connection? Say to a specific branch for example. Just curious if you can use multipule link types.
View 4 Replies
View Related
Jan 29, 2012
I would like to connect my USB WIFI dongle directly to my wired router, this would enable me to have wifi access without having my PC switched on all the time, is this possible and if so what kind of adapter do I need? I think I need USB A Female to Ethernet RJ45 Male Router Adapter.
View 5 Replies
View Related
Oct 15, 2012
I have a huawei 521i router that I recently reset back to factory settings. I have been trying to set up my wifi but something is wrong. I can connect with my ethernet cable but not wifi. I have set up my wireless connection and I can see it in the list.
View 1 Replies
View Related
Mar 3, 2011
I have two computers in the house which are linked by an ethernet cables, my wireless router only has one ethernet hole,so I would like to know what I need to buy? such as an adapter or something, so I can have two ethernet cables to connect to my router.the type of router I have is called a Hauwei echolite HG521 broadband wireless ADSL2+ router.
View 1 Replies
View Related
Mar 25, 2012
Purchased today 26th March 2012, used CD first as warned, followed procedures, will not connect to WAG 160N modem router. WAG160N has MAC restrictions but MAC of WRT160N added, both in wireless and as a computer. Still won´t connect, gets to 85% in wireless connect mode then fails, gets to stage 4 of router recognition and fails, saying check cables. Cables changed to know working ones, still no success. Tried pinging 192.168.1.1 direct from computer with no success, no access to router log-in page at all. WAG 160N has no problems.
View 2 Replies
View Related
Oct 25, 2012
I have been trying from last 2 days to connect my Wireless USB Modem (from Telecom operator) to Buffalo's WHR-G300N V2 (Airstation Nfiniti High Power Gigabit Router, Access Point & Bridge) device and to connect to multiple devices using eithernet cable such PC and Vonage adaptor. I get internet connection from Telecom operators wireless USB Modem (which does not have ethernet port,, I use wireless to connect to my laptop), so I want to connect this telecom's USB modem to my Buffalo router which has multi ethernet ports. And use these ethernet ports to connect to my PC, Vonage and other wired devices. I am using Buffalo's WHR-G300N V2 (Airstation Nfiniti High Power Gigabit Router, Access Point & Bridge) to get internet from USB modem.
View 6 Replies
View Related
Sep 23, 2012
My e4200 freezes and not connect in any interface not Ethernet not wireless, i connect reset in any way ( push the reset button, push the reset button an unplug the power.
View 9 Replies
View Related
Feb 15, 2012
im using linksys broadband router model no WRT54GC firmware version 1.06....im using it since 2005 still now i didn't face any problem, but since 3days im facing a problem all of a sudden. i.e im unable to connect through Ethernet port ( through lan wire) to my PC, but i can access router through wifi.when i connect through wifi it is saying that there is no internet access. but i can access my router administration.i cross checked with another pc and another connecting cable , but same problem, no use i also tried resetting my router, updated my firmware. no use.
View 1 Replies
View Related
Aug 26, 2011
I'm having trouble getting my Ubuntu 10.04 machine (Sony Vaio VGN-SR490) to connect to the Internet by way of an Ethernet cable connected directly to my router.
I'm able to connect to the Internet using this same cable using a Windows machine, way Linux is configured. [code] It looks like the network adapters list is empty. I will now install both Windows XP and Ubuntu Linux dual-boot. I'm still not able to access the internet, even through Windows. I'm wonder if this could be a hardware problem with the computer or a problem with the router itself. Other computers can connect to this same router, and work fine.
View 4 Replies
View Related
Jan 8, 2013
I want to be able to connect my Canon MX700 printer via ethernet cable to my Linksys Router - WRT54G2, with the ultimate goal of having only the printer and router on, and able to print wirelessly from my iPad, MacBook and/or iPhone.
View 5 Replies
View Related
Mar 27, 2011
My WinXP Home PC won't connect properly (limited connectivity/no internet) via ethernet cable to my router (Belkin N150). Ipconfig /all shows the IP address as 169.254.117.71 but this is determined by an entry in the registry at HLMSYSTEMCurre....'DhcpIPAddress' - REG_SZ - 169.254.117.71. Also listed at 'IPAutoconfigurationAddress'. My laptop connects fine plugged into the same port getting it's IP automatically (192.168.2.2) and getting internet fine. I've tried adding a DWORD entry 'IPAutoconfigurationEnabled' = 0, also tried deleting the 2 values.Tried setting the IP manually to 192.168.2.6 - limited connectivity goes away but I get no internet connection from the router nor file sharing.
View 6 Replies
View Related
Jan 28, 2011
Can I connect my Canon iP6600D printer (USB 2.0 interface) to an Ethernet port on my wireless router so as to end up with a network printer?
View 1 Replies
View Related
Jan 8, 2013
I want to be able to connect my Canon MX700 printer via ethernet cable to my Linksys Router - WRT54G2, with the ultimate goal of having only the printer and router on, and able to print wirelessly from my iPad, MacBook and/or iPhone.
View 1 Replies
View Related
Dec 29, 2011
In my main office, I have a cable modem which is connected to my main E4200 router. All of my equipment (except my Ooma) is served by the E4200. The E4200 broadcasts a wireless network.In my basement, I have a Wii / entertainment center. The E4200 signal from upstairs isn't strong enough to stream video.
I bought the WET610N and have successfully set it up to interact with the E4200 wirelss network. I can hardwire my laptop to the WET610N and verify the internet works greatHowever, the Wii must connect over wireless. I have other equipment in the basement which would benefit from an internet connection. So, I want to A) connect the ESXS88W 10/100 8-port workgroup switch I have to the WET610N *AND* also broadcast a wireless signal in my basement (assuming the wireless network I see in the basement is the same "old" one from upstairs which has not benefited from the WET610N).
How can I set up my WRT54G2 to broadcast a wireless signal in the basement so that it leverages the E4200 signal served by the WET610N, while also having the workgroup switch offer hardwired connections to my other equipment (like Dish Network receiver)? It doesn't seem to work by just plugging the WRT54G2 into the workgroup switch.
View 2 Replies
View Related
May 6, 2012
I'm having trouble getting my Ubuntu 10.04 machine (Sony Vaio VGN-SR490) to connect to the Internet by way of an Ethernet cable connected directly to my router. I'm able to connect to the Internet using this same cable using a Windows machine, so there's something wrong with the way Linux is configured.
Here are my network settings on Linux:
$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
[code]....
It looks like the network adapters list is empty. I will now install both Windows XP and Ubuntu Linux dual-boot. I'm still not able to access the internet, even through Windows. I'm wonder if this could be a hardware problem with the computer or a problem with the router itself. Other computers can connect to this same router, and work fine.
View 3 Replies
View Related
Dec 26, 2011
Using a Dell Dimension 3100/E350, where do I connect the Ethernet cable from Netgear router.
View 1 Replies
View Related
Jan 22, 2013
I have an arris broadband modem combo and the wifi signal in the basement is poor I tryed to connect a netgear n 300 wireless router (wnr2000v3) to extend the wifi with an ethernet cable but the neatgear router does not have an internet connection.
View 5 Replies
View Related
Jan 1, 2012
I have just moved in to a basement apartment and can connect to the internet with my wireless but not with the ethernet cord ran downstairs for me. The other computers upstairs work fine on ethernet through the same router. I do not understand what the problem could be. here are my configs:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
Windows IP Configuration
[Code].....
View 2 Replies
View Related
Feb 7, 2012
I would like to set up a site to site VNP connection between 2 RV120W routers, preferably via IPsec.
The problem is that I would like/have to use a 4G modem router (model TINY) which connects to internet in front of the RV120W (on the local side)
I have no problem with that on the remote site that RV120 connects directly to internet via a public IP address on the WAN port.
Local network 192.168.1/24-----RV120W----192.168.100.1—Tiny---Public IP--------INTERNET
INTERNET--------PublicIP—RV120W—Remote local network 192.168.2/24
View 1 Replies
View Related
