I just bought a new MSI FX720 from newegg and when I plug it in via ethernet to my router, it does not connect. Wifi connects to this router without a problem.I was at a friends house earlier today and it connects via ethernet to his router without a problem.I've also tried 3 ethernet cables through my hub and direct to my router, using different ports.
View 19 RepliesWhen i was looking for a wireless card, everyone seemed to be having connectivity issues with all of these cards, and i regularly have interference issues when the microwave is used which completely knocks off my connection. How to connect a second router as i have a telephone port in my room so i am able to connect my PC/PS3 via ethernet. Just some basic info, I'm on the O2 wireless network using their Thomson router, and i also have a Bt Homehub 2 lying about for some reason.
View 2 Replies View RelatedI bought a Philips blu ray player that has an ethernet port to connect to stream movies. My router is located on a different floor so connecting via an ethernet cable is not an option. How do I connect my blu ray player on the 2nd floor to the router on the 1st floor?
View 2 Replies View RelatedI'm trying to get a DS lite connected to my university's wifi, which I learned doesn't broadcast a Wireless-b signal, which a DS needs to connect. Can I setup a my own router connected to an ethernet port, configure it to boardcast wireless-b and get on wifi through that? I asked another forum which said yes, but I want to make sure before I buy anything.
View 1 Replies View RelatedI am currently having issues with connecting to the ethernet through my router. I can confirm this is not a software problem becasue I have tried this on mulitple PCs and I get the same problem. Today I tried connecting my pc to the modem via ethernet and it connected without a problem at all. The router i am currently using is a cisco RV120W and is connected to the modem via the WAN port, -not sure if that has anything to do with it. Things that I have already tried is system restore on the router, unplugging everthing for 1 minute and pluging itin, flushdns and everthing else IP related on CMD. Also I should add my modem is on router mode and my router's network is seprate from the modem, also wireless is workng fine, and I have tried relpacing all ethernet cables to confirm the cables arn't broken. The IP address I recieve on devices on the ethernet is 169.254.x.)
View 2 Replies View RelatedIs it possible to connect to router use crossover cable to attach with the 10Bt ethernet port on each router?
View 2 Replies View RelatedI have internet through my cable company and currently use their wireless netgear router. I purchased a Netgear Router N600 but it does not have a port for the cable connection. Can you recommend the correct wireless router
View 1 Replies View RelatedSo you've got broadcast networks - Ethernet, PPP networks such as serial & T1/E1 and then youve got Non-broadcast multi-access links such as Frame relay and ATM. I understand the concepts of each. That's not the problem.My question is, is it possible create a broadcast network (Ethernet) but also connect a router to another router via a PPP connection? Say to a specific branch for example. Just curious if you can use multipule link types.
View 4 Replies View RelatedI would like to connect my USB WIFI dongle directly to my wired router, this would enable me to have wifi access without having my PC switched on all the time, is this possible and if so what kind of adapter do I need? I think I need USB A Female to Ethernet RJ45 Male Router Adapter.
View 5 Replies View RelatedI have a huawei 521i router that I recently reset back to factory settings. I have been trying to set up my wifi but something is wrong. I can connect with my ethernet cable but not wifi. I have set up my wireless connection and I can see it in the list.
View 1 Replies View RelatedI have two computers in the house which are linked by an ethernet cables, my wireless router only has one ethernet hole,so I would like to know what I need to buy? such as an adapter or something, so I can have two ethernet cables to connect to my router.the type of router I have is called a Hauwei echolite HG521 broadband wireless ADSL2+ router.
View 1 Replies View RelatedI have upgraded my 'old' Linksys router to a new Cisco 3500 and I can only connect to the new router via Wi-Fi... When I connect using hard-wire - the computer tells me I hve no connection! Same computer works just fine w/old router
Dell Inspiron duo - Windows 7 - Cisco 3500
Purchased today 26th March 2012, used CD first as warned, followed procedures, will not connect to WAG 160N modem router. WAG160N has MAC restrictions but MAC of WRT160N added, both in wireless and as a computer. Still won´t connect, gets to 85% in wireless connect mode then fails, gets to stage 4 of router recognition and fails, saying check cables. Cables changed to know working ones, still no success. Tried pinging 192.168.1.1 direct from computer with no success, no access to router log-in page at all. WAG 160N has no problems.
View 2 Replies View RelatedI have been trying from last 2 days to connect my Wireless USB Modem (from Telecom operator) to Buffalo's WHR-G300N V2 (Airstation Nfiniti High Power Gigabit Router, Access Point & Bridge) device and to connect to multiple devices using eithernet cable such PC and Vonage adaptor. I get internet connection from Telecom operators wireless USB Modem (which does not have ethernet port,, I use wireless to connect to my laptop), so I want to connect this telecom's USB modem to my Buffalo router which has multi ethernet ports. And use these ethernet ports to connect to my PC, Vonage and other wired devices. I am using Buffalo's WHR-G300N V2 (Airstation Nfiniti High Power Gigabit Router, Access Point & Bridge) to get internet from USB modem.
View 6 Replies View RelatedMy e4200 freezes and not connect in any interface not Ethernet not wireless, i connect reset in any way ( push the reset button, push the reset button an unplug the power.
View 9 Replies View Relatedim using linksys broadband router model no WRT54GC firmware version 1.06....im using it since 2005 still now i didn't face any problem, but since 3days im facing a problem all of a sudden. i.e im unable to connect through Ethernet port ( through lan wire) to my PC, but i can access router through wifi.when i connect through wifi it is saying that there is no internet access. but i can access my router administration.i cross checked with another pc and another connecting cable , but same problem, no use i also tried resetting my router, updated my firmware. no use.
View 1 Replies View RelatedI'm having trouble getting my Ubuntu 10.04 machine (Sony Vaio VGN-SR490) to connect to the Internet by way of an Ethernet cable connected directly to my router.
I'm able to connect to the Internet using this same cable using a Windows machine, way Linux is configured. [code] It looks like the network adapters list is empty. I will now install both Windows XP and Ubuntu Linux dual-boot. I'm still not able to access the internet, even through Windows. I'm wonder if this could be a hardware problem with the computer or a problem with the router itself. Other computers can connect to this same router, and work fine.
I want to be able to connect my Canon MX700 printer via ethernet cable to my Linksys Router - WRT54G2, with the ultimate goal of having only the printer and router on, and able to print wirelessly from my iPad, MacBook and/or iPhone.
View 5 Replies View RelatedMy WinXP Home PC won't connect properly (limited connectivity/no internet) via ethernet cable to my router (Belkin N150). Ipconfig /all shows the IP address as 169.254.117.71 but this is determined by an entry in the registry at HLMSYSTEMCurre....'DhcpIPAddress' - REG_SZ - 169.254.117.71. Also listed at 'IPAutoconfigurationAddress'. My laptop connects fine plugged into the same port getting it's IP automatically (192.168.2.2) and getting internet fine. I've tried adding a DWORD entry 'IPAutoconfigurationEnabled' = 0, also tried deleting the 2 values.Tried setting the IP manually to 192.168.2.6 - limited connectivity goes away but I get no internet connection from the router nor file sharing.
View 6 Replies View RelatedCan I connect my Canon iP6600D printer (USB 2.0 interface) to an Ethernet port on my wireless router so as to end up with a network printer?
View 1 Replies View RelatedI want to be able to connect my Canon MX700 printer via ethernet cable to my Linksys Router - WRT54G2, with the ultimate goal of having only the printer and router on, and able to print wirelessly from my iPad, MacBook and/or iPhone.
View 1 Replies View RelatedIn my main office, I have a cable modem which is connected to my main E4200 router. All of my equipment (except my Ooma) is served by the E4200. The E4200 broadcasts a wireless network.In my basement, I have a Wii / entertainment center. The E4200 signal from upstairs isn't strong enough to stream video.
I bought the WET610N and have successfully set it up to interact with the E4200 wirelss network. I can hardwire my laptop to the WET610N and verify the internet works greatHowever, the Wii must connect over wireless. I have other equipment in the basement which would benefit from an internet connection. So, I want to A) connect the ESXS88W 10/100 8-port workgroup switch I have to the WET610N *AND* also broadcast a wireless signal in my basement (assuming the wireless network I see in the basement is the same "old" one from upstairs which has not benefited from the WET610N).
How can I set up my WRT54G2 to broadcast a wireless signal in the basement so that it leverages the E4200 signal served by the WET610N, while also having the workgroup switch offer hardwired connections to my other equipment (like Dish Network receiver)? It doesn't seem to work by just plugging the WRT54G2 into the workgroup switch.
I'm having trouble getting my Ubuntu 10.04 machine (Sony Vaio VGN-SR490) to connect to the Internet by way of an Ethernet cable connected directly to my router. I'm able to connect to the Internet using this same cable using a Windows machine, so there's something wrong with the way Linux is configured.
Here are my network settings on Linux:
$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
[code]....
It looks like the network adapters list is empty. I will now install both Windows XP and Ubuntu Linux dual-boot. I'm still not able to access the internet, even through Windows. I'm wonder if this could be a hardware problem with the computer or a problem with the router itself. Other computers can connect to this same router, and work fine.
Using a Dell Dimension 3100/E350, where do I connect the Ethernet cable from Netgear router.
View 1 Replies View RelatedI have an arris broadband modem combo and the wifi signal in the basement is poor I tryed to connect a netgear n 300 wireless router (wnr2000v3) to extend the wifi with an ethernet cable but the neatgear router does not have an internet connection.
View 5 Replies View RelatedI have just moved in to a basement apartment and can connect to the internet with my wireless but not with the ethernet cord ran downstairs for me. The other computers upstairs work fine on ethernet through the same router. I do not understand what the problem could be. here are my configs:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
Windows IP Configuration
[Code].....
I have a thinkpad t23 ( yes I know a bit old but great for work purposes) and I haven't used it in a bit, over a year or so. I connect the Ethernet cable that I use on my other laptop and desk top to it but can't access the Internet. It shows when I am connected to the LAN and says running at 100mps.
View 4 Replies View RelatedI'll make this short and simple since it's problem a really easy fix.I have a pretty old pc. I have Windows 7 and XP installed in different partitions. Windows 7 doesn't run very well so i'm just going to use XP. On windows 7 it lets me connect to my router wired but on xp it doesn't connect.
View 7 Replies View RelatedI have tried for hours when i connect my computer to the router with an ethernet cord it will not connect. the command prompt doesn't recognized ipconfig or netsh.
View 1 Replies View RelatedI was using my dlink dir 524 but when i change my isp i cannot connect my desktop via ethernet while the internet works good on my laptop via wifi i had done all thing by turning off firewall but no luck i was using xp on my desktop and windows 7 on laptop.
View 4 Replies View RelatedI can connect to internet through my tablet. Also I had no problems last week it was working fine and yesterday I reset the router and it connected for awhile. I have 4 other pcs on the network and they are all working fine.
Not sure what else to try.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 4010 Mb
Graphics Card: Intel(R) HD Graphics 3000, 1813 Mb
Hard Drives: C: Total - 476654 MB, Free - 71864 MB;
Motherboard: LENOVO, Emerald Lake
Antivirus: None
I just reinstalled Windows 7 on my computer again and appear to be having trouble connecting to the internet with my ethernet cable. I've only ever used a wired connection on this computer, but am completely unable to do so at the moment.
View 11 Replies View RelatedI have a desktop computer that I recently installed Windows xp on, and the computer is now missing the drivers. The problem is that the computer was built by a friend and I do not know exactly what drivers that may be needed for this computer connect to the web.
View 17 Replies View Related