Cisco :: Connect 2 Router By Using 10BT Ethernet Port?
Jun 4, 2012Is it possible to connect to router use crossover cable to attach with the 10Bt ethernet port on each router?
View 2 Replies
ADVERTISEMENT
Connect Blu-Ray Player Ethernet Port To Router?
Feb 22, 2011I bought a Philips blu ray player that has an ethernet port to connect to stream movies. My router is located on a different floor so connecting via an ethernet cable is not an option. How do I connect my blu ray player on the 2nd floor to the router on the 1st floor?
View 2 Replies View RelatedPossible To Setup Own Router Connect To Ethernet Port
Oct 8, 2012I'm trying to get a DS lite connected to my university's wifi, which I learned doesn't broadcast a Wireless-b signal, which a DS needs to connect. Can I setup a my own router connected to an ethernet port, configure it to boardcast wireless-b and get on wifi through that? I asked another forum which said yes, but I want to make sure before I buy anything.
View 1 Replies View RelatedConnect Usb Wifi Dongle To Ethernet Port On Wired Router?
Jan 29, 2012I would like to connect my USB WIFI dongle directly to my wired router, this would enable me to have wifi access without having my PC switched on all the time, is this possible and if so what kind of adapter do I need? I think I need USB A Female to Ethernet RJ45 Male Router Adapter.
View 5 Replies View RelatedLinksys Wireless Router :: WRT54GC / Unable To Connect Through Ethernet Port To PC?
Feb 15, 2012im using linksys broadband router model no WRT54GC firmware version 1.06....im using it since 2005 still now i didn't face any problem, but since 3days im facing a problem all of a sudden. i.e im unable to connect through Ethernet port ( through lan wire) to my PC, but i can access router through wifi.when i connect through wifi it is saying that there is no internet access. but i can access my router administration.i cross checked with another pc and another connecting cable , but same problem, no use i also tried resetting my router, updated my firmware. no use.
View 1 Replies View RelatedConnect Canon IP6600D Printer (USB 2.0 Interface) To An Ethernet Port On Wireless Router?
Jan 28, 2011Can I connect my Canon iP6600D printer (USB 2.0 interface) to an Ethernet port on my wireless router so as to end up with a network printer?
View 1 Replies View RelatedLinksys Wireless Router :: E3000 Ethernet Port 4 And Internet Port Not Working
Jul 3, 2012There is no "blinking light" indication on my E3000 at the Internet (Yellow label) and Ethernet port no 4. I tried plugging in 2 cables at all of the ports. I got the blinking indication at Port 1 through 3. The same cable's have no response at Port 4 and Internet port. As a result my I am not able to connect to the internet.
View 2 Replies View RelatedConnect To Internet From Ethernet Port On 2nd PC?
Oct 20, 2011I have my bigpond internet setup on my main pc,works fine connected to a router but i want to connect to the internet via ethernet cable on my 2nd pc. I have a ethernet port on the wall near it so that should work. I don't want to run a long ethenet cable from my router to my 2nd pc because there's a ethernet port right next to it.
View 6 Replies View RelatedDell :: N5110 Wireless Is Extremely Slow / Can't Connect Using Ethernet Port
May 23, 2013I bought my laptop over a year ago. The wireless is really slow. I read other posts about this issue and found out that the network adapter(n1030) on this laptop is faulty or something. So I tried connecting to the internet using the Ethernet port.
The port shows up on my device manager.Realtek PCIe FE Family Controller.I know there is nothing wrong with the modem or the Ethernet cable because internet on the other computers in my house work fine.
I would also like to add that when I bought the computer, it came with windows 7 but had the ubuntu sticker on it. People in Fiji only mostly use windows so I guess the shop I bought this from did the change to windows themselves.
Dell Laptop Latitude 610 Unable To Connect To Internet Via Ethernet Cable Port
Dec 9, 2012I have a Dell Laptop Latitude 610 and I have not been able to connect to the Internet via the ethernet cable port for some four months now. I've tried downloading software from Dell's web site, I bought (and returned) and USB to Ethernet cable, only to find out that it was a model ahead of what this machine needs.I've asked local repair place (Microcenter) what it might be, but they'll only tell me after I pay $70 just to open it up.Another repair guy said that it is probably the motherboard and it wasn't worth fixing. (Yet if it was, wouldn't the entire computer decide not to work at all?) [code]
View 3 Replies View RelatedEthernet Port Doesn't Recognize Any Ethernet Cord
Dec 26, 2011I've had trouble connecting to my own internet and have no wireless. I'm using my neighbor's wireless and it's really slowing her's down. I've tried restarting my laptop (it usually works) and then reinstalled the device under "device manager". It's not the cord, I've checked with my neighbor's laptop and it works fine.I use a Sony Vaio VGN-NS140E with Windows Vista SP2.
------------------------------------------------------------------------
{ipconfig /all} This is while I only have an ethernet plugged in and no wifi connection.
Windows IP Configuration
Host Name . . . . . . . . . . . . : FairyHo
[code]....
Cisco WAN :: 2621 QOS On Router Ethernet Port
Nov 3, 2011The config I am posting is from a 2621 router. This routers Int fa0/0 connects to AT&Ts OPTEMAN 10Mbs Ethernet interface. The other end connects to our HQ router. At HQ is our PRIs and phone switches. I have configured QoS for this router, but don't I have to link them to the ingress interfacce (Int FA0/0)?
View 9 Replies View RelatedUse Switch As Router Or Any Way To Get More Ethernet Port?
Jan 15, 2011If I can use my switch as a router or a way to get more Ethernet port? Since my router is down for the count and I need more ports!
View 4 Replies View RelatedEthernet Cable To Phone Port On Router
Sep 24, 2012HAVE AN ETHERNET SOCKET FOR MY INTERNET BUT WOULD LIKE TO BE WIRELESS MY ROUTER ONLY HAS AN IN PORT FOR PHONE ?
View 1 Replies View RelatedEthernet Port Not Recognizing Ethernet Cable?
Apr 30, 2011I have a Dell XPS M1530 with Vista 32 bit. When i plug in a cable i get nothing, no error, and the comp does not recognize that a cable has been plugged in. I think that this started after my Hard drive failed and Dell replaced it but i'm not positive. No errors (? or !) in Device Manager and I can't find the Marvell 88E80XX 10/100 Ethernet Controller in device manager. I have attempted to Reinstall the drivers. The wireless is still working. I have one Light to the right of the port that is on all the time solid but no flashing with the cable in or out.
View 14 Replies View RelatedCisco WAN :: 1921 Router Performance With 2Giga Ethernet Port
Jun 14, 2012What is the Cisco 1921 router performance if connected with 2 Giga Ethernet port? What is the performance if enable GRE tunnel ?
View 2 Replies View RelatedCisco WAN :: 1841 Router Load Balancing With WIC 2T And Ethernet Port
Jun 9, 2013Can we do the load balancing with WIC - 1T card as ISP - 1 and Ethernet card as ISP - 2 and other ethernet card as my LAN Network.
WIC - 1T - connected to ISP Ethernet card - Connected to Secondary ISP Second Ethernet card - connected to LAN Connection.
I would like to have load-balancing & fail-over between this two connections.
Cisco WAN :: Nexus 5010 Fixed Port - Group C (17-20) Encrypted Ethernet Port
Oct 14, 2012if I can use the encrypted port as unencrypted ethernet ports? url.. Each individual port on the Cisco Nexus 5010 switch is numbered, and groups of ports are numbered based on their function. The ports are numbered top to bottom and left to right.There are 20 to 28 ports on the Cisco Nexus 5010 switch, depending on which GEM is installed.
The 20 fixed ports form group 1 and are named 1/port_number. Ports 1 through 16 are unencrypted Ethernet ports. Of these, ports 1 through 8 are 10-Gigabit Ethernet and 1-Gigabit Ethernet-capable ports. Ports 17 through 20 are encryption-capable Ethernet ports.
Cisco WAN :: 857 ADSL Possibility To Configure Fast Ethernet Port As WAN Port
Apr 4, 2012I have a Cisco 857 router which i used for Internet connection with RJ11 connectior (ADSL0 POTS) but now the ISP has changed the internet link with PPOE type and the ONT connection is RJ45 , Is there a possibility to configure one os the Fast Ethernet ports as WAN port for internet.
View 2 Replies View RelatedConnecting Ethernet From Spare Port To Wireless Router
Oct 5, 2012Laptop has 2 ethernet ports and receives the internet via one of those Ethernet ports. Can I plug a ethernet lead from my spare port on my laptop to a wireless router and create a wireless network (via the internet from my laptop)? Is this possible and how do I do it ?
View 11 Replies View RelatedComputer Ethernet Port Recognizes Modem But Not Router
Feb 10, 2011My computer ethernet port recognizes any modem but will not recognize any wireless routers. My ISP (DSL) spent 3 hours on the phone with me and can't figure it out. I have also contacted Gateway, figuring it must be my computer. I make money on the side fixing computers, so I do have a good idea as to what is what. I run Win7 on a Gateway DX4822 with Intel Pentium Dou-core. I have searched and searched for months and have found nothing. I have asked this question on various forums (including Microsoft) and still nothing.
I have wireless connectivity with a USB 2.0 WAN antenna. I also have a blu-ray player, XBox 360, and Wii all hooked up through this router. The player and XBox are wired, the Wii and a printer is wireless.I have had all things disconnected while trying to solve this issue, thinking that somehow there wasn't enough juice getting through. The cable works. I have tried resets, powerdowns, restarts, system recovery (at one point for a few days it did work as I shared internet from a friend upstairs from me), system restore, many different wireless routers AND modems. With the router connected, the ethernet port light does NOT come on. With the modem directly connected, the light DOES come on. Other computers/laptops in the house work wired into the router.
Wireless Router Not Recognizing Ethernet Cable In The WAN Port?
Jul 10, 2012I have a D-link WBR-2310 wireless router connected to a ZyXEL P-600 series modem. Everything worked fine untill a couple days ago when I had a power surge; since then the wireless router won't show on the modem that the ethernet cable is plugged in, and I get no wireless or DSL internet. I called the internet service provider, and they told me to reset both the modem and the router, which I did and it worked fine for about an hour; then it didn't recognize the cable again. I thought maybe it was the ethernet cable itself so I bought a new one, and it didn't correct the problem. When I hook any of the cables up directly from the modem to the labtop or the pc the ethernet light comes on and I have internet connection again. Why doesn't my router recognize the cable?
View 1 Replies View RelatedCisco Switching/Routing :: 2851 Router Gigabit Ethernet Port
Dec 29, 2012I have a Cisco 2851 router and need an additional gigabit Ethernet port. How to get the part number I need to order?
View 3 Replies View RelatedCisco Switching/Routing :: 2610 Router What Speed Is Built In Ethernet Port
Oct 23, 2011I have a 2610 router. How can I tell if the built-in ethernet port is only a 10BASE-T or if it's a 10/100 port? Is there a "Show" command to give me this information or did it only come one way? I have found conflicting information on this :-( If it's only 10BASE-T, can I upgrade it to 10/100?
View 8 Replies View RelatedCisco Switching/Routing :: Additional Ethernet Switch Port For 2821 Router
Dec 18, 2012I have a 2821 router and need to add another Ethernet port.
However, all the Ethernet modules seem to be End of Sale and the suggested replacements are only compatible with the ISRg2 range.
Cisco WAN :: 2911 - Get Away With Configuring Blackbox With RJ45 To Copper Port On Router Ethernet?
Apr 27, 2011Purchased a 2911 router for a customer, and I'm sure I'm missing a module here.
Teleco installed T1 and left connection to smart jack. Router only has 2-3 copper ports.
Can I get away with configuring the blackbox with RJ45 to the copper port on the router ethernet or do I need to purchase a HWIC ?
Routers / Switches :: Isolate 1841 Router Fast Ethernet Port?
Feb 4, 2011I have a Cisco 1841 router with the followingSerial T1 connection Fastethernet 1 with network address 192.168.0.1 Fastethernet 2 with network address 198.168.0.1I want to isolate Fastethernet 2 so that it cannot access the internet or the 192.168.0.1 network. Only incoming request is available.
View 5 Replies View RelatedEnable Desktop Computer To Recognize Wireless Router Using Ethernet Port?
Mar 20, 2012How do i enable my desktop computer to recognise my wireless router using the ethernet port
View 2 Replies View RelatedExtend Wireless By Adding Extra Router Via Ethernet Wall Port?
Jun 15, 2012My dorms have wifi in the common room, and ethernet wall ports in the rooms since wifi doesnt reach that far. They both have the same network name (e.g. the wifi network is named 'apple', and when i connect through ethernet in my room the name is also 'apple') I need to have wifi in my room. So, if i get a router and connect it to the ethernet port in my room's wall, would that work? Is that all you have to do or is there some other stuff i should know about?also can i put a password on it? And also, will it carry the network traffic of the common room?(if two people are using the common room's wifi, will the wifi speed in my room be affected nd whatnot) i have a linksys router lying around at home (the blue one with the double antennas, everyones seen them, and the one in the common room is the same...wireless g)
View 7 Replies View RelatedF5D7632-4 - Set Up Ethernet Port For DHCP With Belkin ADSl Modem With Wireless G Router?
Mar 14, 2011how do you set up an ethernet port for DHCP with a Belkin ADSl modem with wireless G router, model number F5D7632-4?
View 1 Replies View RelatedLinksys Wireless Router :: WRT610N Connected To Ethernet Port Of Previous Internet Modem
Dec 2, 2011I was very happy working with my WRT610N connected to the ethernetport of my previous internet modem. Recently I had to switch to a new modem CISCO EPC3925. Unfortunately this combination does not work anymore. I don't get an internet connection on my WRT610N anymore. I therefore have to connect all computers (LAN and WIFI) to this EPC3925. Especially for the WIFI I'm not fully happy. My IPAD2 sometimes does not want to connect, a problem which never occurred when connecting to WRT610N.
I probably need to change a setting, but where? In the EPC3925 or in WRT610N?
Linksys Wireless Router :: WRT54GL Option To Restrict / Share Bandwidth Equally To Each Ethernet Port
Sep 5, 2011WRT54GL has an option to restrict or share the bandwidth equally to each ethernet port or wireless? I need this option in a low bandwith area because the first computer connected to the router who makes some traffic (e.g. youtube) takes all the bandwith allocated by the ISP. url...
View 1 Replies View RelatedCisco RV120W / Ethernet Can't Connect Through Router
Dec 25, 2012I am currently having issues with connecting to the ethernet through my router. I can confirm this is not a software problem becasue I have tried this on mulitple PCs and I get the same problem. Today I tried connecting my pc to the modem via ethernet and it connected without a problem at all. The router i am currently using is a cisco RV120W and is connected to the modem via the WAN port, -not sure if that has anything to do with it. Things that I have already tried is system restore on the router, unplugging everthing for 1 minute and pluging itin, flushdns and everthing else IP related on CMD. Also I should add my modem is on router mode and my router's network is seprate from the modem, also wireless is workng fine, and I have tried relpacing all ethernet cables to confirm the cables arn't broken. The IP address I recieve on devices on the ethernet is 169.254.x.)
View 2 Replies View Related
