Linksys Wrt54g / Indoor Wifi Range And/or Interference
May 21, 2011
I have Wireless-G 2.4ghz 54Mbps (Linksys WRT54G) working perfectly short range. But have no connection when I'm in room about 80 ft from router and have doors to rooms closed. Partitions in home are concrete block, not sheetrock. Should I get a new N router? Is there a repeater or booster that will do the job? Or connect existing router to new router in other room with ethernet cable going outside then over roof of house then inside to room?
View 14 Replies
ADVERTISEMENT
Sep 19, 2012
I have a new technicolor TG582n modem and the wifi signal doesn't reach to all the house. It's a big house, lots of concrete walls. I also have a Linksys WRT54G router and I'm wondering if it's possible to put the Linksys in the other area of the house and capture the signal from the Tompson. Then connect to that signal with my laptop. Maybe this will work to give me wifi in all areas.
View 6 Replies
View Related
Mar 17, 2011
What is the difference between Indoor and Outdoor WiFi?
View 1 Replies
View Related
Aug 3, 2012
We have a WRT54G (hardware v6) which we have used for a couple years in conjunction with a cable modem to make a home wifi network. In the past few days, we've been unable to access any sites in the IP range 130.160.x.x (that is, those at The University of Alabama). A particular example is ua.edu (130.160.4.131). The rest of the internet works fine.This is on Ubuntu 12.04, Windows 7, or Android ICS; with Chrome, Firefox, IE9, or SSH. If I connect the modem to an Ubuntu laptop directly by USB, I can get to ua.edu just fine.
I tried resetting the router to factory defaults, upgrading the firmware, connecting via ethernet rather than wifi, and using the Google DNS servers 8.8.8.8 and 8.8.4.4 in the router, but the problem persists. Naturally, UA's helpdesk, Comcast, and Linksys were all either useless or uncooperative. [code]
View 9 Replies
View Related
Aug 8, 2012
Which of these model numbers have the greatest range?
A: WRT54G
B: WRT54GL
C: WRT54GS
View 1 Replies
View Related
Feb 4, 2013
I have a WAG354G that i would like to use to extend the range of my WiFi. First Question is - is it possible, and the second is how do i do it?
View 3 Replies
View Related
Jul 10, 2011
Just got a WAG120N modem/router , everything is set up and works fine.But I am very disappointed with its wifi range.After using an iPhone and a PSP , I found that, its range is 1,80 meters only, in empty room.Is it faulty ? I cant believe its range is too short although I know that its not "enhanced speed & range" as typed on box.I tried all combination of channels/protocols with no success and it's already flashed on latest version. I really cant connect to my wifi devices.
View 2 Replies
View Related
Jul 5, 2012
I cant find any wds setting in the UI.I want to bridge my old route for wifi expanding
View 3 Replies
View Related
Dec 31, 2012
I have a cisco WAG120N with me.wifi range is very less, means my devices won't catch the wifi even if they are 5 meters away from the router. Ways to increase the wifi range of this router. I dont want to use any repeater or any such stuff, just want to achieve a far more range with te existing device.
View 9 Replies
View Related
Jul 29, 2011
I have a new e2500 router and want to use my old WRT54G2 to expand the range of the wireless to reach my detached garage. My house is wired with category 5e cabling, but not the garage, which is why i want to wireless to get expanded. I was hoping the the new e2500 would reach, but it doesn't. How I can do that?
View 6 Replies
View Related
Jul 19, 2011
I have an Asus U31JG with WIndows 7 64-bit. This laptop is a month old to me and the wireless has been acting up since the day I got it, will explain below. I believe my home network is the problem. I have a Linksys WRT54G with WPA Personal encryption. Multiple times a day my internet quits working even though Windows says it has full connection to my router. To fix this, I open command prompt and use "ipconfig /release" and "ipconfig /renew". This fixes the problem for me, it may be a minute or a few hours. The problem is very intermittent and only happens at my home which is why I believe it is my network. However, I changed the wireless channel to 1, the only one around on that channel and tried different security settings. My WiFi works flawlessly if I take my laptop to my friends house where he has a Netgear router. I have also tried a brand new Cisco Router as well as a Netgear router at my house.
I've re installed the driver twice, and the same problem persists in Linux only I just have to disable/enable wireless.
Note: When the internet quits working on my laptop it works on other devices so it is not the internet connection causing this. And my internet is very slow when it is working on my laptop via wireless.
View 9 Replies
View Related
Oct 28, 2011
I'm having trouble connecting my PS3 to the internet. I'm too far away from my wifi router and can't get a good signal strength. I do have an ethernet cable from my pc, but apparently it only works in my pc and not on my PS3. It keeps saying: no ethernet cable connected. I've searched fora, but apparently this can be caused by a lot of things, and I dont really find a solution :s. The problem is, it has worked before, and now it doesn't. Also, ethernet on my ps3 works perfectly at my buddy's house.
I have a linksys wrt54g version 7. I installed the router myself, but if my wired connection to my pc works, and the wireless connection works for the laptop, there shouldn't be any problem I guess?Perhaps, could the laptop -which is on the router's wifi and which is halfway in between my router and my PS3 in distance- act as a wifi amplifier to my PS3? That way, the ps3 could pick up the signal from the laptop, instead of all the way from the router?
View 2 Replies
View Related
Nov 30, 2011
is it any possibility to set my router WRT54G V2.2 as a wireless repeater? and does any manual for this exist?
View 3 Replies
View Related
Nov 22, 2011
I am trying to connect a myTouchQ (t-mobile) through my WRT54G. The android shows that I'm connected and have a good signal, but I can't access the internet or any data. When I turn off the wi-fi connection, I can access through the 4G network. My provider is Cox Cable. I've unplugged the modem and the router for 30 seconds and even reset the security.
View 5 Replies
View Related
Apr 5, 2013
My wrt54g (firmware old - v1.00.6) has run fine for years until my daughter got a laptop with win7. All my other systems still run XP or win2k. I only run wireless with her win7 and one netbook with xp, all the other connections are wired.
Going to speedtest.net and after I reset (pull power) the router, I get 20Mbps download. After the win7 wifi runs for a bit, download speed drops to 2 Mbps or less. It seems to be after she goes to you tube and starts watching videos. If I reset again, it immediately goes back to the full speed of 20. I measure this after she's taken her laptop off the network. So, whatever her win7 is doing, it stays that way after she disconnects (i.e. slow on my other systems) until the reset. I also measured the speed on her win7 system and it also would slow there as well and speed up after a reset (for a while).
View 3 Replies
View Related
May 15, 2011
My cable went out and my neighbor and I have decided to split her at$t broadband, the phone/modem/router is a 2wire.
I have 3 windows 7 computers but only one wireless g usb wireless adapter from tenda. I also have a linksys wrt54g wireless router that I can use.
I have tried to set up the router as a wireless bridge by loading a DD-WRT bin on my linksys but it seemed way buggy -results - I was only able to get 2 of 3 online and if I restarted any of them I lost the connection completely.
Went back to stock firmware and tried to set up a lan between the 3 towers with the linksys then just bridge the two connections on the main pc - results -no internet at all on 2nd and 3rd pc... and when the connection to the wifi network is started I loose my networking to the 2 pc's on the linksys.
Im not sure if im not setting these up correctly as im just following guides and such but since im fairly good with computers this is making me crazy...to be able to set three computers up on 1 good clear wifi should be an easy task but it's just not working out..
View 1 Replies
View Related
Apr 27, 2013
I have the following equipment
E2500 wireless N router (2 of these)
WRT54g router (B/G)
WAP54g access point (B/G)
I am planning to set up a wi-fi network for a single story motel. It is C-shaped; about 300 feet along the longest side with "legs" of 120 and 70 feet. I have included a diagram that I drew for the person that will install it. Until now I have only used that single WRT54g in the office for the entire property and it covers about half the property (left side) but not well and with a dead spot in the top left because of too many walls to go through.
My plan starts in the office (bottom left) with a WRT54g connected to the DSL modem as it always was. That would be connected to one of the E2500s in the middle so it can cover the most area. From there two others would shoot out to each corner (the other E2500 and the WAP54g). They will all be wired together with Cat 5e "riser cable". The routers will be placed in a wide open attic.
1. Is this is a good plan for the size of property? I have heard that N routers have a range of 150ft in every direction so that's why I'm putting one in the middle. Keep in mind that while the attic is open and wood constructed, the walls between rooms are concrete firewall and they haven't been wi-fi friendly. Hopefully putting them in the attic takes care of this.
2. Does starting with a B/G router at the modem mean the N routers will revert to B/G?
3. What are the main settings I need to know about? What "mode" does each need to be set to? Do they need different default gateways?
Can I use the same password/security for all of them? Should I use the same SSID for all?
View 4 Replies
View Related
Aug 6, 2012
I've done a firmware upgrade to latest version v4.21.5 yet my Wifi still isn't broadcasting for my devices to find and connect as of last night (Aug 5, 2012). This hasn't happened before, so I was hoping it would return but still hasn't started working yet.My iphone just says "unable to connect."
View 4 Replies
View Related
Dec 1, 2012
I am having problems with connectivity and my iPhone 5. The Wi-Fi is okay in some parts of my home network, however in others it is abysmmal. When I bring my computer to the places where the iPhone has problems with signal strength/staying connected the computers have full or almost full strength and no problems. I upgraded firmware for the router, spoke with applecare, have reset the router multiple times, and have been trying different channels. I had the phone in with the Apple store where they concluded nothing seems wrong with the hardware. The phone doesn't seem to have problems like this on other wifi networks I have tried. Using a speed test on the iPhone at home in the low connectivity areas results in horrendously poor latency numbers.
View 2 Replies
View Related
Jul 20, 2011
My router's wireless connection goes down intermittently,about once a day. I can access the network with a machine that has a hardwired connection to the router only. To get it back up I have to perform the following steps.1) Reset the router.2) Go to the router web page, http:\192.168.1.13) Set router name4) Set router password5) Set wireless network name6) set wireless network secuity mode: WEP7) set wireless network password
LinkSys WRT54G V3.1 router with firmware update V4.21.1
View 2 Replies
View Related
May 26, 2012
DSL modem works fine when connected directly to computer. No internet output from WRT54G wired or wireless, but wireless network is recognized by computer, just no internet. I did a reset and installed the latest firmware, then I ran thru the setup CD that came withe the router, and the internet test said no internet connection was available. Cables are fine, connector innards look clean.
View 4 Replies
View Related
Apr 29, 2012
My WRT54G lost the WiFi connection. I can get the internet if I connect the cable from my modem to my computer but my wireless connection is gone. So it's an issue with the router or settings. I called Linksys and was told the settings would have to be reset/updated. I was told there would e a fee. I did not want to pay a fee. I'd like to try to resolve myself.
I have a Mac laptop. Verizon ISP.
View 2 Replies
View Related
Oct 3, 2012
I have a Linksys WRT54G 2.4ghz at one point and need the signal to go 300 feet to another location. Running an RJ45 cable that distance want work and no way to run any kind of land lines. Everything will have to be done wirelessly.
What equipment do I need to get the signal to reach out to 300 feet?
View 4 Replies
View Related
Dec 8, 2011
New wireless router was installed yesterday. I switched from Linksys WRT54G v. 5.0 to Medialink N. I hardwired to desk top first. Then I turned on my laptop and connected to the internet without problems. Next device = Acer Aspire netbook. The netbook receives a strong signal from the router but cannot connect to the internet.
View 1 Replies
View Related
Aug 27, 2012
I recently bought the top end ea4500 hoping its "high end" claims would get a better wifi signal in my bedroom(on my iphone 4s) than what i was getting with my WRT54G.The end result is it constantly drops signal completely or shows my network but when I try to connect says "cannot connect to wireless network" even though it's staring me right in the face. When I hook my WRT54G up, I get a signal.. all be it weak, but at least it doesn't drop out on me.Did I just waste almost $200 on a high end router that can't push a signal out stronger than my almost 7 year old WRT54G? or am i missing some setting that will make this EA4500 worth its claims? settings info:everything is pretty much on "default" aside from the SSIDs for the different bands and the corresponding WPA passwords.
also another problem, it seems like the router itself craps out every 60-120 minutes, no leds lit up on the router and my modem (Cisco DCP3010) shows no "link". Yet when hooked directly to the PC there is a "link", so pretty sure its the router and not the modem.
View 9 Replies
View Related
Jun 27, 2011
I have both the WRT54G and a E1000 wireless routers and this problem is occurring for both of them.I use AT&T DSL and the speeds are fine when it is :
1. Not plugged into router
2. Wireless Network Mode is disabled through the router configuration page, having all devices wired.
However when wireless network mode is enabled, speeds drop significantly, 15~17 ms ping goes to 250~800 ping, and download speeds are way lower also. When the router is reset, the regular speeds will return for maybe 30 seconds to 1 minute, then it'll drop back down. I'm positive there's no outsiders connected to my network and this problem still occurs, only when the router is giving out wireless signals. Sometimes the problem randomly goes away for a while but it will always come back. I've tried many things, firmware upgrades, factory restore, none of them seem to work, the only solution so far has been to disabling it, but I need it to be on as there are other devices in other rooms of the house that need WiFi to connect to the internet.
View 9 Replies
View Related
Dec 21, 2012
Every night I turn everything off via power strip, including the router. Before I turn off the router, my roku connection is good.In the morning, the roku will work for about 20 minutes, then disconnects, and then I'm unable to find the router.I'll then need to reset my router's settings (I have the WRT54GS), and then uplug, and replug the router.It's important that I unplug the router every night.Is there a way to configure the settings so I don't have to reconfigure the settings every morning?
View 4 Replies
View Related
Aug 26, 2012
I recently updated my WRT54G V3 to frimware 4.21.5 and now get regular wireless connection issues. The wired connection never has any problem (can connect to the router and the internet), but none of the wireless devices can see either.
The problem happens every couple of days, and cycling the power seems to be the only fix. When the problem does occur, the wireless devices don't even see the broadcasted SSID. But cycling the WRT54G's power fixes that.
I've gotten a few suggestions to do a "30-30-30" reset, but can't find exactly what that entails.
View 5 Replies
View Related
Apr 10, 2012
I am using a Linksys Wireless-G Broadband Router(Model WRT54G). I am trying to set up a desktop computer to have a wireless usb adapter running so I can connect to the Wireless-G Broadband Router. When I run the setup CD for the wireless usb adapter it asks me to push the Wi-Fi Protected Setup Button on the Linksys Wireless-G Broadband Router.
I have looked at the Linksys router found an obscure button on the front with the Cisco Systems Copyright logo on it. I pushed this but the wireless usb adapter failed to locate the wireless network. There is also another button on the back of the Linksys Router that is a Reset button.
View 1 Replies
View Related
Dec 20, 2011
Could I use DHCP for wireless connection and assign private IP for PC for wire connection ?Will it conflict to each other ?
View 3 Replies
View Related
Mar 20, 2012
I am in a situation where I share internet access with roommates. We have a Gateway which is conected to the provider and which delivers ethernet and WiFi signal.
In order to isolate myself from my roomates and to protect my network connection, both wired and WiFi, I would like to plug in the Ethernet cable I get from the Gateway to my router, and then configure my router's firewall and WiFi enctryption to maximize my safety.
However, I am having some problems. I have already configured the router as "router" and not "Gateway" and I am trying to assign it an IP address different from the default one, which is the one the gateway has, and a ranger of DHCP IP's, also different from those of the Gateway. In other words, 192.1681.N.1 for the router and start from there.
View 9 Replies
View Related
Mar 1, 2007
my wap54g is not working even i hold reset butoon for 60 second it not woring even my linksys wap54g reset button is not work for reset it, It not do any thing and still i cant accest is web interference
View 9 Replies
View Related
Jun 19, 2012
I have a metal shop that needs wireless indoors and outdoors.
Will it work if I mount the 1262 inside with 4 indoor antennas mounted inside the building and 2 outdoor antennas mounted outside?
View 5 Replies
View Related
