Prevent Neighbour From Using Wifi?

Sep 2, 2011

I have high speed wifi at home and the wifi is WPA-PSK protected. My neighbour will be coming to my home to work with me and I will be keying my wifi password into his Windows XP laptop for him to access my wifi.

This is one time access only, after that he is not allowed to access my wifi. To prevent him from accessing my wifi, I will have to delete the password that I keyed into his laptop.

Where do I find this wifi password in the Windows XP? What folder and what filename?

View 14 Replies


ADVERTISEMENT

How To Prevent Wifi From Disconnecting From Laptop Every 15-30 Minutes

Aug 3, 2012

Wifi says connection is available and that it is full strength yet every 15-30 minutes it disconnects and a box pops up saying click to reconnect, yet it will not reconnect.... I have to totally reboot the computer to get back on wifi and I lose whatever I have done are am in the middle of

View 1 Replies View Related

Home Network :: Prevent Multicast From Flooding Wifi?

Apr 12, 2011

My IPTV connection works fine so far but as soon as I start watching TV I can't use my WiFi connection anymore. My router is an "Alice Modem 1121" (SIEMENS S1621-Z220-A) with 4 LAN ports and a WiFi interface (4th LAN port provides the IPTV). It is directly connected by wire to my PC's ethernet card for the IPTV and the internet is provided via the WiFi. When I activate the LAN connection the WiFi and internet connction stays up and requests can be sent but nothing returns anymore. Another device (iPod) has no problems with accessing the internet while IPTV is in use. I also have a Netgear WNR1000v3 router which I tried to use as AP instead but it's exactly the same problem. Unlucky the Netgear router is not supported to use dd-wrt firmware yet (I've found a step by step guide to prevent multicast floods with dd-wrt/ebtables). But maybe the Alice Modem can handle this problem on its own. I read some stuff about VLANs and splitting them but I have no clue how that would look like.

The "nas_0_1_34" is for the IPTV.

View 4 Replies View Related

Wireless :: Stop Neighbour Using Internet?

May 1, 2011

My internet connect has been really slow since new neighbour moved in.How can I stop him using my connesction?

View 3 Replies View Related

Cisco WAN :: 1841 - Bgp Neighbour Reset Exactly Every 3 Minutes

May 18, 2012

i have cisco 1841 router and we have MPLS WAN Co.nnectivity
 
We configured BGP in the router and the link is not stable. i checked in the router after every 3 minutes bgp session is resetted. 
 
LOG:
May 19 13:53:37.612 India: %BGP-5-ADJCHANGE: neighbor 10.237.48.5 Up
May 19 13:56:38.224 India: %BGP-5-ADJCHANGE: neighbor 10.237.48.5 Down BGP Notif

[Code]....

View 7 Replies View Related

Cisco WAN :: 3845 / Unable To Reach Neighbour Even After Link Restoration

Mar 2, 2012

I have a problem where I have 3845 router and c3845-advsecurityk9-mz.124-24.T5.bin dis is the IOS running on it and there's a back up BRI interface for the serial. Now if my serial link goes it normally goes to my BRI, once we had a time where the BRI was also down and when we restored back the Serial link we were still not able to reach the other side. We are using OSPF routing to reach the destination. When this happens and when we reboot this router we are able to reach the destination. sometimes we are able to reach it when we remove ospf and use static and  now if we put back the ospf routing the link comes back, this happens again and again.

View 2 Replies View Related

Cisco Switching/Routing :: Gateway 7600 / How To Know If Bgp Neighbour Advertised Subnet Or Not

Nov 27, 2012

how to know if my bgp neighbour advertised my network from his side or not ???
 
here is my config :
 
Gateway7600#sh ip bgp
BGP table version is 8, local router ID is 192.168.40.3
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found

[code]....

View 5 Replies View Related

To Prevent Being Hacked From The Internet

Apr 9, 2012

I share my internet connection with my roommate who is very tech savvy. I found out yesterday that he has been hacking into my gmail account and reading my emails. I didn't think it was quite possible and I'm very surprised. He manages the internet connection and has full access/control over it.what can I do to prevent him from accessing my information?

View 3 Replies View Related

How To Prevent Network Monitoring

Feb 21, 2012

I live in a shared flat. And all 20 rooms are connected to this switch I believe. Is there any method to prevent the landlord/tech guy monitoring our internet activity (e.g. bandwidith activity, websites we looked at, etc.

View 5 Replies View Related

How To Prevent Same Ip Address Range Conflict

Aug 5, 2011

I'm trying to perform ping to another network segment using nat to those devices but the ipaddress i assigned are the same as the segment i am trying to monitor is there anyway to overcome this?

View 4 Replies View Related

How To Prevent Network From Accessing Another One By Iptable

Nov 29, 2012

how to prevent one network fro accessing another network by iptable

View 1 Replies View Related

Prevent Internet Connection From Getting Disconnected?

Sep 5, 2012

Is there any software that will prevent my internet connection from getting disconnected no matter the cause ?

View 5 Replies View Related

Cisco Wireless :: How To Prevent Certain APs From Associating With WLC 8.1.185

Mar 29, 2012

We have 9 WLCs around a corporate network.  Each of the WLCs was in the same mobility group for failover purposes, and to permit APs to reconnect back to their primary WLC in the event of a failover.
 
However one of the sites has now been sold and pending separation of the LAN infrastructure the APs need to be isolated and prevented from associating with any WLC other than their primary (on site).  From our experience once the APs know about other WLCs they retain this list in NVRAM even if the secondary WLC is removed from the configuration they will still associate with one of the known APs if possible (Cisco document this). WLC v 8.1.185.

View 14 Replies View Related

Cisco :: Prevent VLAN Change On Port?

Apr 26, 2012

I often have to change switch ports to different VLANs. Regardless of whether I find the ports myself or if someone tells me what the ports are, I'll always perform additional verification steps to make sure that the port I'm changing doesn't connect to a switch, a router, a server, or something else that's equally important. But mistakes happen, and I have accidentally changed the wrong port to a different VLAN, thereby disconnecting the end node.

Is there a way to configure a port so that it will not allow you to change its VLAN (or make any configuration changes to it)? I'm imaging a command that when applied to a port would not allow you to make config changes to the port until you remove that command from that port, at which point you'll be able to change its VLAN, shut it, etc. If there isn't such capability, what strategy do you use to minimize the possibility of accidentally changing trunks, routed ports, or important access ports to different VLANs (other than labeling and verify)?

View 1 Replies View Related

Set Desktop Wallpaper And Prevent Users Changing It?

Jul 1, 2011

I've tried a few things to get around this, some kids where I work keep changing the wallpaper, sometimes to quite disgusting things. Since groups of them all use the same login with roaming profiles, everyone gets to look and laugh at the annoying wallpaper.

I've tried enabling active desktop local policy and preventing users changing wallpaper but as far as I could tell active desktop didn't even come on, I refereshed the policy.

Does anyone know a good efficient way of simply setting a wallpaper for all users in an ad ou and preventing them changing it? I've got rid of all ways to set a desktop wallpaper apart from the right click menu on an image which has the "set as backgound" option, that's what they are using to do it.

I don't really mind how it's done, could be a registry hack to remove that option from the right click context menu when clicking on an image, I could then deploy it with group policy.

View 5 Replies View Related

Wireless :: Prevent Unauthorized Access With Window XP?

Aug 3, 2011

I am using wire less internet in a public space with my personnel lap top, my question is how to stop unauthorized access to my lap top desk top, drives and other files.

View 1 Replies View Related

HL 2270 Dw - Prevent Printer Installation Over Network

Aug 18, 2012

My wife is moving into an apartment complex for school and she has a Brother HL-2270DW printer. Since she only has a laptop and moves around the apartment, I would like to use the wireless on the printer. Unfortunately, the internet for the building is just through wireless APs. I have the printer installed on the network, but my concern is that anyone can just search for network printers and install it. While printing on it won't be useful for them, it could be a good way to waste her paper/toner. Is there a way to prevent users from installing it without being able to change the router settings? I did not see any option in the web configuration.

View 3 Replies View Related

E4200 Best Setup To Prevent Virus Spreading Within LAN

Feb 21, 2013

looking to equip the office with a hardware firewall. Just want to confirm its ability of fending of viruses before getting to the end user and/or spreading once there. Had an issue with a Alureon virus a few days ago, would like to prevent this from happening again.

Office Setup:

3x Windows 7 PC's
Synology DS712+ Server
E4200 w/DD-WRT
8-Port Cisco Gigabit switch

View 6 Replies View Related

Broadband :: Disable Internet Ports To Prevent Hacking?

May 21, 2011

how to disable certain ports - 25,53,25,138, & 445 - except internet to prevent hacking (can u explain in a way as a novice like me can understand pls)

View 1 Replies View Related

Servers :: Prevent Changing DNS Server IP / Disable LAN Properties

Jan 10, 2011

I am using Vista and have only one user accounts.Now I want to prevent changing the DNS server IP. I can prevent changing the DNS server IP or disable the LAN Properties.

View 4 Replies View Related

Change Password To Prevent Unauthorized Access By Other People?

Feb 15, 2012

How do I change my password to prevent unauthorized access by other people?

View 2 Replies View Related

Prevent A Certain Host On LAN1 From Accessing A Server On LAN2?

Mar 17, 2011

I am having some trouble understanding extended control lists. I am trying to prevent a certain host on LAN1 from accessing a server on LAN2, while still allowing the host access to the rest of LAN2.This is what I thought the command should be:

access-list 100 deny ip 175.16.1.2 0.0.0.0 175.17.2.2 0.0.0.0

My understanding was that:

Green = source & mask
Red = destination & mask

However this seems to stop all my other hosts on LAN1 from pinging the server also.

View 11 Replies View Related

D-Link DIR-825 :: Prevent Access To Setup Pages Via Wireless?

Jan 16, 2012

Just bought myself an 825.  I've got it set up and working, but how do I prevent wireless users from accessing the setup pages for the router?

I only wish wired access to the setup pages. I'm used to doing this on my old linksys, but can't find the setting on the new router.

View 3 Replies View Related

Cisco Switches :: SF302 - Ssh Prevent Prompt For Password

Oct 3, 2012

I'm wondering if anyone knows to set up the switch so that when I'm connecting via SSH, the switch doesn't prompt for a username if I supply one in the initial connect request? For example, we usually connect by typing something like the following at a command prompt:
 
ssh johndoe@10.10.10.10
 
Then the switch would prompt for a password. I've tried this on the Cisco SF302 but it still prompts for a username, and then the password.

View 7 Replies View Related

Routers / Switches :: Setup DMZ By Using Home Router To Prevent Attack?

May 5, 2011

Currently in my office have a TPlink wireless router (WR1043N), and Dlink 615 router.Below is my office's network organization.Internet-->TPLinkRouter(192.168.2.0)-->DlinkRouter(192.168.0.0)We want to host a demo website but we are afraid our network being attacked. So we wish to implement a DMZ network to hide our internal network from outside. My question is can i setup a dmz network with the above capabilities by using home routers?

View 5 Replies View Related

Cisco :: 4400 - Command To Prevent Timeout Of WLC Telnet Session

Nov 3, 2011

What the command to prevent a telnet session to the 4400 controller from timing out is?

View 1 Replies View Related

Cisco Switching/Routing :: 2960 Way To Prevent Network From MACflap

Feb 1, 2013

i just need to know is is there any way to prevent network from MACflap.The best way will be when switch will disable the interface where the macflap was detected.I need to set this security feature on 2960s.

View 7 Replies View Related

Cisco Switching/Routing :: Prevent 224 Multicast From Hitting Switchports?

Apr 15, 2012

We have a couple of switches with a L3 Vlan 238 interface which runs PIM SM and OSPF, and HSRP.   We have connected to this same segment telemetry processors which have raw socket interfaces configured - which means it picks up all IP packets which hit the interface and forwards them along.So we dont want the processor to recevie any of the 224.x.x.x switch housekeeping traffic? is there anyway to prevent that ?

View 1 Replies View Related

Cisco :: Ipv6 / Ipv4 Fragmented Packet - How To Prevent It In Router Part

Jan 1, 2013

i got trouble for this ipv4 & ipv6 fragment trafic prob/attack.how do i prevent it from comming in to my network? is it way to prevent it in cisco router part?

View 2 Replies View Related

Cisco Switching/Routing :: 5548 Prevent VLAN From Internet Access

May 9, 2012

At the core of my network I have two Nexus 5548's with the routing/L3 daughter installed. They have a default route that points to my ASA 5520 for Internet access. I have configured a VLAN that I do not want to have access to the Internet. What is the best way of preventing this access?  ACL on the Nexus or Firewall rules on the ASA?

View 1 Replies View Related

Linksys Wireless Router :: WRT54G Suggestions To Prevent Lost VPN Client Connections

May 23, 2011

Dropped VPN connections.I experienced a similar issue a few years ago with my LinkSys WRT54G router with dropped connections to my corporate network using the Cisco VPN Client.  To make a long story short the problem was the result of the following:

1. The default ""Client Lease Time" on LinkSys routers is 0 which means 1 day or 24 hours.

2. By DHCP Protocol definition, DHCP clients must renew the DHCP client IP address lease at the 1/2 life cycle of   the lease (12 hours if using the router's default setting).  This is deadly for VPN clients as the short period of time when the client IP address is no longer valid, the VPN client considers this a loss of network connection. The LinkSys E-series routers further aggravate the situation by randomly assigning new IP addresses to DHCP clients instead of reassigning the client's previous IP address and tends to favor higher host IP addresses in the defined range.

Suggestions to prevent lost VPN client connections:

1. Change the "Client Lease Time" on the router to 8640 minutes (6 days 00:00:00).  

2. Prior to establishing a VPN client connection, use the Windows Command Prompt to issue the "ipconfig /renew"
command to obtain a new IP address from the router that will be good for 3 days (72 hours).  

3. Configure your E-series router to use the <DHCP Reservation> option to pre-assign IP addresses to your systems making sure they are outside the range of the dynamically assigned DHCP addresses.  Using default settings,these would be in the range of 192.168.1.2 thru 192.168.1.99 as the router starts at 192.168.1.100 thru 192.168.1.149. 

View 1 Replies View Related

Cisco Switching/Routing :: C2960S / Prevent Traffic Per Port Or Inside VLan

Nov 27, 2012

I want to know what is the best way to black traffic inside the same VLAN, this VLAN is a user VLAN, it means that I am talking about access layer.I wanted to use private vlan, but C2960S doesn't support this feature. Any other way to prevent any to any traffic in the user vlan, this vlan only have to speak at the Layer 3.

View 2 Replies View Related

Cisco Application :: ACE 4710 Prevent Failback To Primary Server When Probe Fail

Feb 26, 2011

I want to configure my ACE so that if a probe fails, it fails over to the backup rserver, BUT it won't failback to the primary rserver until manual intervention is complete. The problem is we don't want an rserver to fail and failover to secondary, then failback to primary, repeat... (flip-flopping).   I want to be able to have time to get on the server and find out what may have caused the probes to fail before it fails back.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved