i have cisco 1841 router and we have MPLS WAN Co.nnectivity
We configured BGP in the router and the link is not stable. i checked in the router after every 3 minutes bgp session is resetted.
LOG:
May 19 13:53:37.612 India: %BGP-5-ADJCHANGE: neighbor 10.237.48.5 Up
May 19 13:56:38.224 India: %BGP-5-ADJCHANGE: neighbor 10.237.48.5 Down BGP Notif
[Code]....
I have a dlink cable modem and dlink dir-655 router. When the router is first turned on or a setting is changed any/all of the computers here can connect to the Ultima Online game server for login but within a few minutes most will not be able to. Its as if they are being refused a connection to login.owo.com (I think that is where they connect to). 1 maybe 2 computers can still connect but its fickle and can't know which 1 or 2 it will be or for how long.any computers already connected to a game server are fine its just the ones trying to login after the router has been running for a few minutes. My first assumption 2 days ago when this happened with my dlink gaming router was that the router developed a problem but now with a new router its still happening. The problem started when I re-enabled the wireless on my gaming router and when I noticed the problem I re-disabled the wireless but the problem persists. A new modem (the DIR-655) did not work...
View 10 Replies View RelatedCannot access console baud rate has been changed by customer and I have tried all the standard ones 1200,2400 ect, have tried the J7 baud jumper on the mother board....?
View 11 Replies View RelatedHava cisco router 1841 forgot user name and password and need to reset it to its factory setting
tried boot while holding ctrl and break get into rommon1>
rommon1>confreg 0*2142
rommon1>reset
still shows rommon 3>
Every time I reset my 1841 router the startup configs don't load. Its acting like a password recovery process has started. I can't figure out why its doing it,
View 2 Replies View RelatedI have high speed wifi at home and the wifi is WPA-PSK protected. My neighbour will be coming to my home to work with me and I will be keying my wifi password into his Windows XP laptop for him to access my wifi.
This is one time access only, after that he is not allowed to access my wifi. To prevent him from accessing my wifi, I will have to delete the password that I keyed into his laptop.
Where do I find this wifi password in the Windows XP? What folder and what filename?
My internet connect has been really slow since new neighbour moved in.How can I stop him using my connesction?
View 3 Replies View RelatedI have a problem where I have 3845 router and c3845-advsecurityk9-mz.124-24.T5.bin dis is the IOS running on it and there's a back up BRI interface for the serial. Now if my serial link goes it normally goes to my BRI, once we had a time where the BRI was also down and when we restored back the Serial link we were still not able to reach the other side. We are using OSPF routing to reach the destination. When this happens and when we reboot this router we are able to reach the destination. sometimes we are able to reach it when we remove ospf and use static and now if we put back the ospf routing the link comes back, this happens again and again.
View 2 Replies View Relatedhow to know if my bgp neighbour advertised my network from his side or not ???
here is my config :
Gateway7600#sh ip bgp
BGP table version is 8, local router ID is 192.168.40.3
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter,
x best-external, a additional-path, c RIB-compressed,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
[code]....
Does any know what " Last reset from system-reset " means? Is this becouse of a power failure or someone reloading the switch?
View 3 Replies View RelatedI have the WAP11 serial number G3110320414 that does not have a reset switch in the back. How do I get back to factory settings?
View 3 Replies View RelatedMy connection is up for a minute and then goes off for a minute. I don't think it has anything to do with the router itself as my room mates' laptop works just fine.
View 7 Replies View RelatedMy new small router 866vae crashes and makes cold reboots every 20-30 minutes. I updated IOS, but it didn't work. The logs show texts like this:
--------------------------------------------------------------------
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
--------------------------------------------------------------------
-Traceback= 0x808A0980z 0x808A4E90z 0x8089E2B4z 0x808AD350z 0x8086F000z 0x80A3B7A0z 0x80A1D444z
[Code].....
I am using Cisco ACS 5.1. I would like to authenticate my ip phones with mab (Avaya phones) and the commputers with dot1x.Everything works fine except that the phones which are successfully authenticated with mab tries to authenticate again and again and again ... and this fills up the ACS logs. Every authentication is successfull and the phone does not hang up. But this fills up my logs and makes them unusefull.
switch version: cat4500-ipbasek9-mz.122-53.SG3.bin
port config:
interface FastEthernet2/25 switchport access vlan 107 switchport mode access switchport voice vlan 502 switchport port-security maximum 3 switchport port-security switchport port-security aging time 1 switchport port-security aging type inactivity no logging event link-status load-interval 60 speed 100 duplex full qos vlan-based authentication event fail action authorize vlan 109 authentication event server dead action authorize vlan 101 authentication event server alive action reinitialize authentication host-mode multi-domain authentication open authentication order dot1x mab authentication priority dot1x mab authentication port-control auto authentication violation restrict mab no snmp trap link-status dot1x pae authenticator dot1x timeout quiet-period 30 dot1x timeout server-timeout 25 dot1x timeout tx-period 15 dot1x timeout supp-timeout 25 dot1x max-req 3 tx-queue 3 priority high no cdp enable spanning-tree portfast ip dhcp snooping limit rate 10end
What could b the issue with my internet connection i keep losing the connection every few minutes if im idol on sites not games related i stay connected when i go onto games i start losing the connection. [code]
View 13 Replies View RelatedI have had this problem for a week now. We have a desktop, PS3, and 3 laptops connected all at the same time. No problems with the desktop, PS3 and one of the laptops so far, but my Asus A53E and the HP Pavilion keep getting disconnected every few minutes! I recently installed a Linksys router (just to try it out) and it didn't really do well so I returned it and switched back to our old router which is the DLink DIR-625 router. It was doing okay for a few days and then suddenly it just started going crazy. Both the desktop and the PS3 are connected to the router through cable, but the other laptop (Dell) is not. I don't understand why it's just the Asus and the HP that get disconnected a lot. I already tried updating my drivers and reformatting my laptop, but still nothing. I don't want to call our ISP (Shaw) and D-Link because the internet works fine on the other 3.Additional Information:
-Modem
-Microsoft Security Essentials (on the Asus)
-avast! (on the HP)
Recently I've been experiencing random disconnects.
My setup is a Actiontec Q1000 with (QAQ002-31.20L.4) modem/router that talks to qwest. Then I connect to a linksys router WRT54G2. I connect directly to the linksys router with an ethernet cable, but my family connects to it wirelessly.
I ran a constant ping to my modem and to google, and on the random disconnect, the Actiontec Q1000 gets a huge 4000ms response time (but then it resumes normally), and I get ping timeouts to google. Windows 7 will say "no internet connection available". Not sure if it makes a difference, but I had google timeout 4 times during my constant pings.
Nobody else is connected when it does this random disconnects, so I'm not sure what's causing it. I've tried a lot of things, from changing and flushing my dns, connecting directly to the modem, turning off QoS/firewall settings, but nothing seems to work.
just today, my PC's connection will work for 10 minutes then totally shut down. Although it still says it is connected nothing will connect. Im posting from my old laptop and obviously is still working with my internet.
View 1 Replies View RelatedI have 3 computers on the same modem--one is wireless, other 2 desktop. The one which is having problem is my office desktop. Can't stay online. Have tried many diffrent fixes and cleaned malware, etc to no avail.
View 9 Replies View Relatedwhy does my internet disconnect every 10 minutes with a hard wire modem,an then start working for 12 to 24 hrs.
View 1 Replies View Relatedmy ethernet cables is plugged into my xbox and router. it gets disconnected every 15mins. should i change something in the routers config page?
View 11 Replies View RelatedFor the past 2 weeks i have been losing internet connection on my pc, ps3, laptops and phones every 15min and i have no clue what to do. It has never done anything like this.
View 2 Replies View RelatedI use a MacBook Pro and am connected to my home's wireless network. For the past 2 years, it has worked without a hitch. Suddenly, Comcast changed to XFinity service and I now drop my Internet connection every few minutes. When I go to the airport, I can alway see it and reconnect (although sometimes it asks me for my WPA which is saved, but....). So I can't decided if I need a new wireless router (2 years old) or if the change to Xfinity made a difference. (Honestly, I think it's a name change and nothing more, but the timing is suspect.) I am attaching a screen grab of my iStumbler report. I live in a very populated area so you will see lots of networks. I am using Mathews1.Before you suggest hooking up via hardwire, the morons that built this house (and me, the moron who didn't notice), didn't bring cable up to the top floor where the bedrooms and office is. I'm not allowed via the home owners assoc to bring cable on the outside of the townhouse so unless I destroy walls and floors, I'm forced to wireless access only except for the basement where the router comes in.
View 6 Replies View RelatedI thought I had this problem fixed i.e.unticking `allow computer to turn this device off to save power`in Wireless Connection Properties, I still have the problem the diagnostics say I did not receive any response from the wireless router or access point! I have Vista SP2.
View 15 Replies View RelatedMy wireless cuts out randomly, sometimes every 5-10 mins and others can be on for hours. I have to go to the network connections, disable the wireless then enable it again for it to work.The wireless icon sometimes has a yellow triangle with a ! in it and sometimes has a red cross over it. This happens when I'm sitting next to the router. I have my PS3 and WII set up to it too and they work fine and they are further away from the router so dont think its that.
View 14 Replies View RelatedMy wireless wifi keeps going on and off frequently (I have to unplug and plug it back in about 10-30 times a day) and when its is connected its slow. I have a Belkin Play (high-performance Dual-Band Networking).
View 1 Replies View Relatedmy idea net setter disconnect after 10 or 15 minute.
View 1 Replies View RelatedMy internet connection will cut out every 5-10 minutes. Sometimes it will stay on but MOST of the time it cuts out every 5-10 min. other times my ping will jump to over 2000 or stay around 200 for no reason. It has gotten to the point of where I can not play any online games anymore, and there is no possibility of a wired connection.6-8 months ago we has slow internet speed and Comcast told us it was not their fault it was our router, and that routers go bad every year or 2, so we got a new one. My connections to the old router used to be 3-4 bars and with the new one it is 1-2. Ok so the big issues was it started getting bad where my connection would randomly cut out. I thought it was my wireless network adapter because it was old. I was constantly unplugging it and plugging it back in or releasing and renewing my ip every 5-10 minutes sometimes more often. Let me define cutting out, sometimes it would be everything, but most times it would be just one application like website or just the game I was playing but not steam chat.
So I got a new wireless adapter and we hooked back up the old router to find out Comcast had lied to us and our speed was fine on the old router ... in fact out connection was better. but still the problem remains.. random cutting out of internet completely and random huge lag spikes.... it is less frequent but still every 10-20 min something goes wrong. I have tried changing the routers channel, updating both routers. I tried setting myself up a static ip but it would not give me internet connection if I did... idk if i had the DNS wrong or something. Anyways I am at my wits end and about damn ready to try ANYTHING to make this work again. It did before so I know it can work! I will try anything and post any reportsSometimes I might be slow to respond because I have to try things out for a little bit to see if they worked.
So I got a computer upgrade for Christmas. Basically, what it did was replace my crappy onboard graphics card for a decent card to play games better. I also replaced the 250W power supply with a 430W supply (the card needed 300W). Ever since I upgraded, my internet goes on and off all day, only for me. (everyone else doesn't seem to have the problem) We did not touch the internet router at all, and it's wireless by the way. Something must have changed when I put the upgrade in, but I don't know what. the worst thing is, I can't play any multiplayer games now because when I go into a 60-90 ping server I end up hitting 250 ping and teleporting all around. I can't do youtube anymore because my internet goes off and on and off and on. My computer is now basically useless. I'm not allowed to touch the router, but I doubt it's the internet's fault considering it's only me. As I'm typing this, I'm copying the message in case the internet goes down again.
View 19 Replies View Relatedit seems so far that everything other than AIM works out of the box with this router but within 5mins time AIM disconnects. I have tried the application filter and port forwarding but nothing seems to work.
View 9 Replies View RelatedI have an Aironet 1250 Access Point. I was asked to upgrade the software on the access point so I downloaded c1250-k9w8-tar.124-23c.JA5.tar and tried to upgrade it from IE9 browser window. I allowed the upgrade to run overnight. It ran for 900+ minutes before I unplugged the router. I know it said not to interrupt the upgrade, but it seemed like something was wrong.So, I have the access point conntected to my computer with a blue cable and it is also connected to the network. I tried running Hyperterminal hoping that I could set the ip address or otherwise connect to it.
The Hyperterminal printout gives me this:
APc89c.1dfd.189a#*Aug 22 20:10:03.523: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.Not in Bound state.*Aug 22 20:10:12.027: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.*Aug 22 20:10:12.095: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 159.169.59.114, mask 255.255.255.0, hostname APc89c.1dfd.189a
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (159.169.59.39) (159.169.59.25)
Translating "CISCO-LWAPP-CONTROLLER"...domain server (159.169.59.39) (159.169.59.25)
Is it possible to get this access point working again? How would I get it working again?
This is a new device, just initially installed about a week ago. I updated to the latest firmware. We have iphones, ipads, and Samsung Galaxy smartphones all trying to connect to this WAP at this office, but cannot seem to connect. If I power cycle the WAP, we can connect for about 5 min, then it loses it and cannot connect again. I have strong signal, device says "connecting" then immediately "disconnected"... does this on loop forever.WPA/WPA2 PSK.I don't know what to do. About to go buy an Apple WAP.
View 3 Replies View RelatedI have two Cisco 888-K9 setup on a 4 wire private line about 2-3 km apart one configurated as CO and the other as a CPE. During config and testing the SHDSL connection was completely stable although this was only over about 300m of CAT5e. Now the devices are installed the in field I'm finding the connection constantly comes up and down every minute or so which leads me to suspect noise or line quality is the issue. How to debug this and tweak the setting to improve stability? Config from the CO & CPE attached along with DSL controller output from active and non active connection on the CO.
View 2 Replies View Related