Ps3 Keeps Saying Ethernet Cable Not Detected But It Is Connected?

Nov 8, 2012

my ps3 keeps saying ethernet cable not detected but it is connected.

Ethernet Cable Not Detected?

Jan 17, 2012

My onboard adapter wasn't working so I bought a new dlink adapter. Adapter installed and is registering in device manager.. but it says that there is no ethernet cable connected. I have a laptop connected to the same router that is connecting to the internet. I switched out cables with ones that worked with the laptop and on the desktop before. I have cycled the router

View 2 Replies View Related

Ethernet Cable Not Detected

Sep 26, 2011

I'm having trouble with my ethernet port. I have a Asus g73jh computer running 64-bit windows 7 and i have an atheros ar8131 pci-e gigabit ethernet controller NDIS 6.20 for my network adaptor, that is fully updated and says is working properly but doesn't recognize when an ethernet cable is plugged in. The cable works on my xbox fine so I know that the cable works fine. I'm pretty sure that there might be something physically wrong with it or I just don't know.

[code]....

View 7 Replies View Related

Ethernet Cable Not Detected / LED Lights Are On

Jul 25, 2011

I got myself a weird problem. A few hours ago I installed Blueline's Driverscanner, but after the installation I lost my internet connection. I've checked the networkconnections and it's not in the list anymore.The really weird part is that there is a LED light coming from the cable, indicating it has a connection, but it is not making any.

View 23 Replies View Related

Ethernet Cable Not Being Detected Randomly In Dorm

Aug 23, 2012

So i just moved my desktop into my dorm room and am using an ethernet cable supplied by the school for my desktop. Every 10 or 15 seconds i will lose internet connection because according to the troubleshooting on the computer there is apparently no cable hooked up (there is obviously). I've tried using both ports in the router and both yield same results and 2 different ethernet cables which both had the same problem. Others in the building have internet connection w/o problems which leads me to believe that there is something up with my computer. I run windows 7.

View 3 Replies View Related

Ethernet Cable Not Detected After New Service Installed?

May 14, 2012

I switched from DSL to cable about a week ago, I have two desktops connected via ethernet cable to the modem. One works fine, the second stays connected for 5 seconds, disconnected for 5 seconds, connected, again, etc until the system is on for 45 minutes or so and then it stays connected. I feel like it is probably a setting and that the system is trying to detect something during that time. Problem is I have no idea where to start and Comcast is totally useless. I have already replaced the cable because that's what they said the issue was, it wasn't.

View 2 Replies View Related

Ethernet Cable Connected But Not Recognized

Oct 8, 2012

I have tried 3 cables and all three are not recognized even though they are plugged in. I have uninstalled network adapter and re installed it and i have updated the driver still nothing so i don't know what to do next.my laptop is a hp pavilion g6 series

View 10 Replies View Related

Connected Ethernet Cable To Ps3 But It Does Not Detect?

Apr 22, 2011

i acces internet on my pc using tata photon+ mobile broadband service,my problem is that i bought a ps3 and want to share internet connection with pc using ethernet cable via lan modem, for this i connected ps3 and pc using ethernet cable,i go to custom and wired setting of ps3 but my ps3 keep saying 'connect ethernet cable'.

View 7 Replies View Related

Cannot Ping Modem Even Connected Via Ethernet Cable

Apr 22, 2011

A friend recently re-installed windows XP on their HP Laptop. They were connected wirelessly with a Linsys router (model wrt54g.1) and an RCA Cable Modem. The Cable ISP can ping the modem and gave me the IP address over the phone. I cannot ping the modem even when I take the router out of the loop. The network card (i1394) in the Laptop is functioning normally and I can see traffic on the modem (both the Cable Internet light and the PC activity light are flashing green) the ethernet port on the laptop is also flashing (amber). However I cannot reach the internet and cannot even ping the modem. The modem is brand new..

View 2 Replies View Related

Connected Through Ethernet Cable But No Internet Access?

Jun 10, 2012

I have a desktop running windows XP Professional x32 SP3 and my network adapter is a Realtek PCIe GBE Family Controller. The desktop is connected to the network with an ethernet cable.Up until yesterday the internet connectivity just stopped working. I am seeing a very low number of received packets as opposed to the high number when it was working. It is showing that it is connected to the network but I still can't access the internet. Also I should mention that the desktop is at work and it is connected to a DHCP server that assigns IP addresses. I have updated all the drivers and I have used Winsock Fix and Netsh but it still isn't working. However the weird thing is that if assign a static IP address to it...it works. But I can't do this because I am not suppose to hook it up to the ports assigned to the switch for static IP's. It has to be connected to the DHCP switch. Why does it work when assigned a static but not if it gets an IP assigned by the DHCP server or switch. Also even if I try to reset, renew or release the IP...when I connect again it still gives me the same IP. It wont change.

View 1 Replies View Related

PC Connected To Ethernet Cable - Internet Connection Keeps Disconnecting?

Mar 21, 2013

So, for some reason my internet connection started disconnecting about every 1-5 minutes. It worked fine this morning, however, when I turned my PC on a few hours ago it became very unstable. After it happens I have to reconnect to internet (it doesn't work all the time, I usually have to do it two times for it to work), and then again after a few minutes the connection dies. Tried restarting my computer, tried restarting the modem, tried the troubleshooting network thing (it keeps saying "Local Area Connection doesn't have a valid IP configuration", but gives no solution). Also, I tried connecting on my cellphone and on a laptop and both of those work. However, those connect through WiFi, while my PC is connected through an ethernet cable[code]

View 4 Replies View Related

Ethernet Cable Connected To Card - Slow Downloading?

Mar 8, 2012

Could the new internet card be making my downloads and emails VERY slow or is it bad line speeds. Would a new modem router improve things.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G2 Ethernet Cable Not Connected

Feb 17, 2013

I'm using a refurbished WRT54G2 v1.5 router. I've had the router for two and a half years and have never had a problem. I recently unplugged my DSL modem and this router to move them, and when I plugged them in again, the router stopped picking up the internet signal from the DSL modem. I'm able to get internet when I hardwire directly to the modem though. I tried resetting the router and setting the router up from scratch again, but now I just get error 321 Ethernet cable not connected when I try and run the setup cd.

View 6 Replies View Related

Linksys Wireless Router :: E2000 - PS3 Error / Ethernet Cable Is Not Connected

Nov 19, 2011

Problem: My PS3 displays An Ethernet cable is not connected almost immediately after logging in. I am connected through a Linksys E2000 router. If I reset the cable modem, it will work for 10-15 minutes until it errors out again. If I plug the PS3 directly into the cable modem, it works fine. I'm really confused. I do not believe it is the router, as my computer is also connected to the router, and works fine. My Touchpad is connected wirelessly and also works fine. I do not believe it is the PS3, because it works fine if I plug it directly into the cable modem. I tried switching to wireless and it finds a lot of other signals (including mine), but I have the same problem if I choose wireless.I first had this problem with a launch PS3 and a Netgear router after almost three years of no problems.

View 8 Replies View Related

Linksys Wireless Router :: E1000 Connected To Modem Via Ethernet Cable Produces 16.0 Speeds

Jan 18, 2012

I have DOCSIS 3.0 modem and a Linksys E1000 wireless router with which I get reults from SpeedTest of 8.6 mps down, 1.57 mps up up from 15 mps service from cable provider. Connected to modem via ethernet cable produces 16.0 speeds. Do I need to upgrade the router or are my settings wrong?

View 1 Replies View Related

Routers / Switches :: Difference In Ethernet Cable And Ethernet Networking Cable?

Apr 28, 2013

Is there a difference in an ethernet cable and an Ethernet networking cable? I have an Ethernet cable and a 6 port splitter I am trying to connect. I have 4 ports in the router that are in use. When I connect them to the splitter nothing s working.

View 1 Replies View Related

Ethernet Not Detected Causing No Internet?

Jul 21, 2012

For starters I have a qwest m1000 modem and a netgear router.this morning there was a rather large thundestorm that caused my power to cut out while I was usin my computer.. once I got it back up and running the ethernet light on my modem wasn't liighting up.I reallly have no idea what to do. Everything but the ethernet is working. I can still get to my routers website but that's it, and I don't what to do there once I'm on it.Is it possible the storm messed up the settings? Or killed part of my pc/modem? On my computer the ethernet light next to the jack on the back is yelllow when its threw my rouuter, but when I plug my modem into it directly it doesn't light up at all.

View 5 Replies View Related

Ethernet Network Adapter Not Detected?

Aug 25, 2012

I could not boot the other day so I spent a few hour pulling everything out and checking memory components,etc.m taking the battery out finally fixed the boot issue but now there is no Internet or network detected or network adapter. It is not the router because pc in the other room is working fine on same connection. Mseems like a CMOS or bios issue. There was a message before boot about reverting to default bios settings. I can't update or remove driver because it is not detected and no Internet.

View 10 Replies View Related

Lan Cable Not Been Detected

Oct 12, 2011

i have an issue with a belkin ethernet expresscard used on a laptop where the onboard network is a static ip address hooked up to an insurment and the express card is dhcp .i can connect to the network in one location with out issue and on the other location the express card will not connect but the on board card will connect fine when set to dhcp and i dont want to set the express card to a static ip address.i do's not see a lan cable connect but it is.all the simple issue have been ruled tryed differnt lan cable used same lan point on diffrent laptop and connected with out issue .ip relased renew dns flushed winsock reset etc..dhcp servers are the same (both locations)default gate way the same (both locations)this is class A ip address range?

View 1 Replies View Related

Strange Connecting / No Cable Detected

Apr 22, 2013

The issue that I am having is that the network cable I have that going from my router to my desktop computer, seems to be flaky, at least it seems that way...When I try to use the network cable that goes into this desktop, into another computer(one that I know works), the connection status alternates between connecting, and no network cable detected, connecting...and no network cable connected, and so forth.it NEVER connects. When I plug the cable back into the desktop, it does the same thing for maybe a minute, but then eventually connects. However, every other computer, laptop, macbook, another desktop PC, that I have tried connecting using this same cable never connects.

View 5 Replies View Related

Lan Cable Not Detected In Windows Vista?

Jan 24, 2013

I have reloaded windows vista in my desktop. Every thing is working fine except that system is not detecting the lan cable. I have tried with a new cable but no luck.

View 1 Replies View Related

Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC Won't Detect Ethernet Cable?

Aug 8, 2012

I am having a problem with my Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC. It is not detecting my ethernet cable, and thus leaving me without internet on my desktop, after i updated its driver. The cable is not the problem as I have tested the cable with my laptop. I tried rolling back drivers, doing system restore and removing drivers with driversweeper and letting windows install the drivers again. However, none of these worked for me. I doubt the NIC is faulty as it was working before i updated the drivers. I am using windows 7 home premium 64-bit.

View 9 Replies View Related

Linksys Cable / DSL :: WAG160N Blinking With No Ethernet Cable Attached To Router

Feb 24, 2012

I have a WAG160N wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.

What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ?

View 1 Replies View Related

Ethernet Port Not Recognizing Ethernet Cable?

Apr 30, 2011

I have a Dell XPS M1530 with Vista 32 bit. When i plug in a cable i get nothing, no error, and the comp does not recognize that a cable has been plugged in. I think that this started after my Hard drive failed and Dell replaced it but i'm not positive. No errors (? or !) in Device Manager and I can't find the Marvell 88E80XX 10/100 Ethernet Controller in device manager. I have attempted to Reinstall the drivers. The wireless is still working. I have one Light to the right of the port that is on all the time solid but no flashing with the cable in or out.

View 14 Replies View Related

Ethernet Connected But No Internet

Sep 14, 2012

Simple enough, my computer is connected to my modem/router hybrid but it will NOT connect to the internet. The router is providing internet just fine (I am currently typing this on my laptop using internet from that same laptop). I have tried everything. I've tried the different ports on the router, I've tried different ethernet cables, I've even had the modem/router replaced. None of this has worked, so I am convinced that it is somehow a problem with the settings of the computer which will simply not connect to the internet.

The computer will connect to the router (I can login and fiddle around with settings). I've tried re-installing the ethernet card's driver (it's built into my mobo). I've tried inputting IP and DNS servers manually, but nothing works.

Here is a copy of my ipconfig and my ipconfig /all.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersAlexander>ipconfig

[Code].....

View 7 Replies View Related

Wireless :: Works Only When Ethernet Connected?

Jan 23, 2011

I have a Netcomm NB9WMAXXn router and 3 laptops i want to connect to it wirelesslyThe problem is that the iwreless internet connection slows down and eventually drops out after about 30m unless one of the laptops remains connected via Ethernet to the router. The wireless laptops will remain connected to the router but the internet connection will fail. The laptop with Ethernet connection retains a very good connection so i'm thinking this is an issue with my router or it's configuration

View 1 Replies View Related

Ethernet Plug Connected To The Router?

Jun 20, 2012

Have got one ethernet plug connected to the router and then one upstairs connected to my ps3, can I add another plug and connect another device to it or do i need two plugs to connect to another port on my router for it to work? If I buy another set of plugs will they still work or will they cause interference?

View 1 Replies View Related

Cannot Connect To Internet Even Though Ethernet Is Connected

Aug 7, 2012

Am trying to fix my husband's computer, which seems to eb ok except that it cannot connect to the internet. The connection is wired and works fine (my computer, next to his, works well). I have tried pinging google.com and cannot resolve, but pinging numerical addresses works fine.

View 1 Replies View Related

Modem Turns Off When Connected Via Ethernet

Nov 1, 2011

I have a 2wire modem and I'm using att DSL. The internet was working fine, I went out of town for 2 days, I returned to find my internet wont work. During the time I was out my brother said it hadn't worked for the 2 days. The modem works fine and all lights are green when my desktop is turned off or not connected. It even lets my brother use wireless on his laptop. However, when I turn on my computer or when I connect it to the modem with an ethernet cord, the DSL light will go red and not work.

View 7 Replies View Related

Cisco Switches :: SG300-10 Ethernet Connected But No IP Connectivity

Apr 28, 2013

I have a strange problem with a SG300-10 (our first SG300) working as a desktop switch.When a PC that is connected to the switch is powered off and is later (a few minutes or next day) switched on, the PC has a ethernet-connection to the switch, but no IP-connectivity.The PC-statistics shows that ethernet is connected and it sends packets, but the PC does not receive any packets.At the same time the SG300 statistics for the port says, that the ethernet is connected (same paramaters as the PC) an that the switch is sending IP-packets (broadcast and unicast) to the port, but does not receive any packets. The switch shows follwing entries in the ram log for the port: [code]

With the older firmware 1.2.9.44 the IP-connectivity worked after waiting 5-10 minutes.With the new firmware 1.3.0.59 I can wait even 15 minutes, there is no change and nothing happens.But when I change some "unimportant" parameters of the port (i.e. change port speed from autonegation to fixed 1000M, or vice versa) and then save the running configuration to the startup-config, around 5-10 Seconds after the configuration is saved, the port gets full IP connectivity and after that works fine (until the PC is switched OFF and ON the next time).This is a very strange behaviour. As "PC" I have tested this with HP-workstations, Lenovo Thinkpad and a MAC Mini. The switch "reacts" to all the same.Following I have attached the config of the switch. [code]

View 3 Replies View Related

RVS4000 Netgear WNDAP360 Will Be Connected To Ethernet Jack

Nov 9, 2011

I have a network closet where all the ethernet ports in each room of the house is routed to so wired routing performance must be good.I also need a good wifi network since we have multiple laptops and tablets we use around the home. I do have 2.4GHz and 5GHz devices so I need the dual, simultaneous wifi operation.The gear I can choose from to do this:

Asus RT-N56U

OR

Cisco RVS4000 + Netgear WNDAP360

The home is a 2-story unit and the networking closet is upstairs near the front of the house. If I go with the Asus RT-N56U, the wifi network will be centered in the network closet. If I go with the Cisco RVS4000 + Netgear WNDAP360, the Cisco router will be in the network closet and the Netgear WNDAP360 will be connected to an ethernet jack closer to the center of the house.

View 8 Replies View Related

Video From Mac To Pc Via Ethernet Cable?

Jul 21, 2011

I'm trying to set up a system where a lecturer can sit at home and give his (video and audio) class across the street via an ethernet cable strung across the street. The only problem is he has a mac, and we in the class running it aren't going to leave our PCs for macs!Is there any simple way to connect the mac to PC (without running through a router, as it slows down the system)?If so, what programs will work best for both PC and mac for streaming the video (and are free)[BTW I don't think a 100m cable is too long for the signal.