Setup Wireless Routers Around Flat To Enable Internet Throughout
Jun 28, 2011
I have recently moved into a new flat and with my wireless router in my livingroom I am unable to get good signal in either of the bedrooms? Its a more or less open plan flat so unless I have lead in the walls or something silly like that stopping the signal.What I am trying to do is have a wireless router in the livingroom and then one in the hall way so if I have a laptop in either the livingroom or bedrooms I will still pick up signal from the closest router!I currently have a brand new Netgear DGND3300v2, Netgear DG834PN, Sagem F@ST2504 and a BT Home Hub 2.I have read about having routers act as access points and the like but I am not great with networking to be honest. I have good computer skills so if it is explained to me I can pick it up rather well.I would like the wireless router in the hall way to pick up the internet from the wireless router in the livingroom... wirelessly!
View 1 Replies
ADVERTISEMENT
Apr 27, 2012
I was looking for flat LAN cables so it would go under my door to the router located in another room. When I search for "flat ethernet cables" on Amazon, I get a bunch of results on "snagless" ethernet cables.
This is slightly cheaper than flat cables and it's from Belkin. Do the 2 terms mean the same thing (ie. flat/thin)?
View 2 Replies
View Related
Aug 24, 2011
I am using RV220W with the latest firmware, I want to make "Wake on LAN" work for my NAS, I found the following description on Internet: "If you wish to use Wake On Lan over the internet you will need to set up your destination firewall/router to allow "Subnet Directed Broadcasts". Most routers and firewalls disable this option by default.You will then need to allow traffic through on your firewall/router on a specific port. The choice of ports is up to you."
So how can I enable "Subnet Directed Broadcasts" on RV220W?
View 3 Replies
View Related
Jan 24, 2013
when I try to enable network internet connection on my computer it tells me that somebody else is using IP 192.168.0.1
View 2 Replies
View Related
May 3, 2012
I’m having issues with enabling Apple’s AirPlay services on a relatively simple network consisting of a Cisco 881 (Advanced IP Services) and an autonomous Cisco 1142 AP. I’ve attached a diagram explaining the connectivity. I believe I have to enable IP Multicast at the router, but I’m not really sure the best/right way to do it. Also I’m not sure what/if any commands would be needed at the AP.All of the wireless clients are confirmed to be in the same subnet, so no real routing is happening etc. Also regular Internet connectivity/routing from the wireless clients is fine.
View 5 Replies
View Related
Mar 6, 2012
I'm trying to setup an ACL on my SG300-20 to enable FTP and a few other protocols to a server, but I'm running data that returns on different ports (ie active FTP).
Below is a sample:
-------------------------------------------
Extended IP access list Protocol_Restriction
permit tcp any ftp any any
-------------------------------------------
Now that works great to allow a connection, but with active ftp when the data tries to come back on a different port (I assume) it is just hung up as all other ports are denied.
I event tried allowing all ports to come back from the server:
-------------------------------------------
Extended IP access list Protocol_Restriction
permit tcp any ftp any any
permit ip any host 192.168.0.100
-------------------------------------------
But that also didn't work seem to work.
I've played around with this in layer2 and layer3 to no avail. I've also seen many tips on applying in and out to the various interfaces, but that doesn't seem to work. Is that something that is only available on higher end switchers/firewalls?
View 1 Replies
View Related
Mar 8, 2013
I am using 3G to access the internet on my PC. I have a 3G modem connected, and want to setup my Linksys WRT54GL router to enable wi-fi, so other devices can access the internet as well.
View 7 Replies
View Related
Nov 7, 2011
I have a Dell switch setup with 2 Vlan's. Vlan 1 is to the network. Vlan 20 is going to be for wireless access to the internet. How do I configure the switch/router so that Vlan 20 only connects to the internet and not the network? I will later want to have a 2nd SSID that I want to connect to both the internet and network.
View 5 Replies
View Related
Apr 26, 2011
Is it possible to setup a router to router connection over the internet with fixed IP Addresses with two WAG320N?
View 3 Replies
View Related
Jan 24, 2013
how do I setup an enable password for an ASA 5510? At the moment its setup to authenticate using RADIUS (which I'd like to keep doing) but I need to setup an enable mode password.
View 3 Replies
View Related
Nov 5, 2012
Can the N150 be set up so that it just runs a private network - not connect to the internet? The auto-setup doesn't seem to work without a modem attached to it and I don't want it to be hooked up to the outside world, just a few computers and a NAS device on a private net.
View 1 Replies
View Related
Apr 4, 2011
how to connect modem?
View 1 Replies
View Related
Aug 9, 2011
How do I enable the wireless capability on my hp G7286US Notebook? It was working fine until last night. My LAN connection works for my desktop; however, I cannot enable the wireless connection on my laptop. My OS is Windows 7?
View 1 Replies
View Related
Nov 8, 2011
Is there a way to set up Quick VPN on the RV120W without changing the internal subnet? I have just taken over responsibility for a network and I don't know all of the nooks and crannies yet, so I'd rather not change the internal sub net. I've tried setting up a user then changing the LAN settings afterward, but it automatically removed the VPN user when I did so.
View 1 Replies
View Related
Jan 1, 2012
I've just purchased a couple of SRP527W routers. I've been unable to even browse to the default 192.168.15.1 to start my configuration. My local network is 192.168.1.x. At risk of showing my stupidity, what am I doing wrong.
View 5 Replies
View Related
Jun 15, 2011
I have two laptops which connect to the router via wireless. This router is wired to the modem. I can connect each laptop to the router then make an internet connection. This works fine. But if one laptop is connected to the internet, then the other cannot. I have to disconnect the first laptop then reconnect with the second.
I have had this scenario working in the past and can't remember what I have to do to enable both laptops to use the internet connection at the same time.
View 4 Replies
View Related
Feb 15, 2013
Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : : 3.13.17 Build 120426 Rel.29216n
ISP : Sky
I am trying to setup my ftp site.My internet address appears as FTP Server Configuration
Server Status: Started
Internet Access: EnableDisable
Service Port: (The default is 21, do not change unless necessary.)
Internet Address: 192.168.0.3
How does my ftp site get active, it keeps the 192.168.0.3 address.I have enabled and saved hoping this will allow it, but no joy.
View 11 Replies
View Related
Mar 29, 2011
I am trying to setup internet access and intranet access using two cards per PC. I don't have sever software and I want to be able to share files between several machines. I have two routers. One that connects to cable modem and one that connects to intranet side. I have assigned different static ip addresses to both cards.
View 6 Replies
View Related
Mar 21, 2011
So far we add any router in the existing network simply by disabling DHCP server, and adding LAN ip for that. We don't add WAN detail at all in the additional routers. And plug one cable from main network to the LAN port of the additional routers.So we basically use that additional routers only as a access point for WIFI.But what I wonder is if it's possible for me to use the additional routers with the same feature as of the main routers i.e. Enabling DHCP server so that it too can give its own DHCP ip address.
View 2 Replies
View Related
Mar 9, 2013
I'm trying to telnet into the my RV180 router. How do I go about it.
I created 3 VLANS
1 at 192.168.1.1
20 at 192.168.20.1
30 at 192.168.30.1
Here is the Multiple VLAN Subnet Table:
1 192.168.1.1 255.255.255.0DHCP ServerEnabled 10192.168.10.1255.255.255.0DHCP Server Enabled 20 192.168.20.1 255.255.255.0 DHCP ServerEnabled
I can ping the router at all 3 IP addresses.How do I enable the telnet service on the router?
View 1 Replies
View Related
Apr 5, 2013
I was actually looking forward to setup multiple routers at our college(I know its quite late) where we have quite a good network of ethernet cables. Also, almost every cluster/lab has its own switch and we use static IPs with proxy to one network address(192.168.130.2). The user should be able to travel across multiple ROUTER/AP zones without changing connections.
all I got was I have to do something with MAC cloning and SSIDs.
View 6 Replies
View Related
Apr 24, 2011
My current setup is a wired connection from modem in office to Linksys WRT54G2v1 in livingroom and from it I have wired connections to Mac & Laptop back into office, Apple TV and another Linksys WRT160Nv3 located in far bedroom.The reason for this setup is that my home has been a vortex of death for wireless and cell receptionI have a guest house on same side of house as far bedroom and in order to get single to the person living there, I put in the WRT160N in the bedroom. This setup works but lately the 54G causing the wired connections to loose internet connectivity.This seems to happen to me every 2 years with Linksys and I end up buying newI purchased a D-Link EBR-2310 v2.01 non wireless router to put in and take all the wired connections off the 54G. But I fear I'll break everything when I try this. How best to treat the Linksys routers if I have the D-Link as the primary router
View 4 Replies
View Related
Apr 17, 2013
I am connecting the RV180 to a Huawei Echolife HG850a ONT via PPPoE, dynamic IP address from ISP.
However, error message shows:
Fri Apr 19 02:54:15 2013(UTC) [rv180][System][NONE] pppoeMultipleEnableDisable: pppoe enable failed
Fri Apr 19 02:55:16 2013(UTC) [rv180][System][NONE] pppoeMultipleEnableDisable: pppoe enable failed
I am not able to get the RV180 to logon via PPPoE and get its dynamic IP.
Firmware is version 1.0.2.6, tried resetting to factory defaults, still the same.
View 6 Replies
View Related
Sep 8, 2011
According to the manual rv082, if you wan to use vpn.. check the enable
But I can't check enable botton... it's disable So i can't check
View 1 Replies
View Related
Jun 25, 2012
i have 8 users in my office. i want to enable the URL Filtering for only 5 users in my office and 3 users will have no URL Filtring.
View 7 Replies
View Related
Feb 13, 2012
What is the WAN to LAN Throughput of RV042 router with QoS and SPI enable?
Will the RV042 router able to support a 60Mbps down 3Mbps up Internet connection with QoS enable and SPI enable without slowing down the connection?
View 1 Replies
View Related
Feb 16, 2012
My adolescent son wants to create a server to host video games. We, the parents, want to separate our computers and files from all the crazy security risks my son and his friends take, while allowing them to learn by their mistakes.I want 2 separate networks, or does this make sense? Would love to have our computers (assorted PC's, Macs, both laptops and desktops, running Vista Ultimate, Windows 7, OSX 10.5 and up), ipods, TV's, Blu-rays, wireless printers, etc. isolated from our son's computers, ipods, TV's, XBox, Blurays, wireless printers, (as well as the digital stuff his friends bring over).Since security is the reason for this, would love any tips over and above Brian Posey's article on Tech Republic (5 common security mistakes people make on setting up wireless networks, or something like that)We have Optimum high speed (testing up to 65 mps) internet service and 5 static IP addresses to work with.
View 4 Replies
View Related
Oct 20, 2012
How to enable UPNP on CISCO routers - 36XX , How can I simualte UPNP connections.
View 2 Replies
View Related
Nov 22, 2011
I was wondering if i can enable url filtering on my 2691 or 2651XM routers so that if someone visits any website i can see that under router logs. right now i am using kiwi syslog that logs the router activities.
View 3 Replies
View Related
Jun 4, 2012
how can enable addressing ipv6 in router linksys EA4500? I need access on the terminal of router?
View 1 Replies
View Related
Aug 28, 2012
I want to setup a static ip address for a h.264 network dvr ,however my desktop computer is out of order, that is connected direct to router,is it possible to use my wireless laptop to setup the router,or will I have to connect the eithernet cable to the laptop.
View 4 Replies
View Related
Oct 18, 2011
where i am from, the houses are made of conrete. so obviously my wi-fi degrades. i currently have 1 basic wireless g linksys router set up, in my bedroom as thats where the primarry devices are. there is a portion of the house where the signal is non existant and i want to set up a 2nd wireless router for that area to have signal. its a fairly large house with 4 bedrooms.here is a breakdown of the device priority:
The main room (my room, east end of house)
Gaming PC (gaming, downloading, netflix streaming) non wireless
Wife's Laptop (occasional streaming, general internet surfing)
PS3 (gaming and netflix streaming)
Ipad (streaming)
[code]....
The general purpose of all this is just have wireless across the whole house for mobility, my room is the priority as far as bandwidth usage and coverage.Also i will be purchasing an N router for my room and moving the G router to my moms.
View 1 Replies
View Related
Feb 6, 2012
I have a Rv082 router that works great and I added a Cisco wireless Wap4410n to one of the ports and it works great for all my wireless connections. My problem is I cannot set up any security on the wireless connection. I see it on network majic pro but cannot access it thru my router . Do I have to install a poe switch first?
View 0 Replies
View Related
