Wireless Connections Available But Cannot Connect
Mar 2, 2013
I am having the same problem with a new computer via my home wireless connection. The computer will not connect to the internet at all while at home, but it will connect to the internet in other locations (like at school). My other computer connects to the internet without a problem. The computer that isn't working can recognize that there are wireless connections available, but cannot connect. I got the same message "the default gateway is not available."
View 14 Replies
ADVERTISEMENT
Nov 9, 2011
I have two wireless connections at home from 2 different ISPs. How can make my laptop connect to both routers at the same time to make use of them?
View 1 Replies
View Related
Jan 14, 2012
I cannot get my laptop to connect to anything but unsecured wireless connections. Ipconfig says Wlan media disconnected. Tried ipconfig /release, renew. Still nothing.
View 1 Replies
View Related
Mar 2, 2013
Virgin media superhub was swapped for a new identical one as some users were unable to connect, but my connection was fine. When i booted my system up after it was configured by virgin I could see all connections but clicking on any "connect" button doesn't yield any form of output from the computer. Password problem? I dont get a response whenever I click "connect" on any of the other 20 wireless connections that i'm picking up, none of them being mine. When trying to add a new network from "network and sharing centre" via "set up a new connection or network" button on the mainpage or "add" button on the "manage wireless networks" tab yields the same, absolutely no reaction from the system.Now, I only add this info for science of deduction purposes, because it is truly baffling me right now, but when i first discovered the problem and went into "devices and printers" in contr panel and "add a device" my computer paused and then BSOD'd.
Things I have tried:
Updated the network card drivers Ran start up recovery - no problems detected after 20x running Logged onto the superhub through another users system and added my mac address to allowed lists, reserved i.p. address - both on and off, all combinations Pressed the wireless card button on the back of my system on and off, repeatedly Disabled/enabled network adapters in device manager Run winsock and dns flushes, ip release and renewals (e.g. things like "netsh int ip reset; netsh winsock reset; ipconfig release;renew)
Each and every troubleshooter All the usual power issues, from setting maximum performance on the network card to unplugging and socketing the router main repeatedly Administrative tools-services-dhcp client-start&auto Tcp/IP protocols-ip and dns configured automatically?
*Haven't tried (last resorts)* Reinstall windows Remove, inspect and possibly replace or just refit network card and factory reset
Give Richard Branson a slap Observations/Details Everyone, EVERYONE else can connect to the network, no problem I have full strength signal to the connection I know the password and it certainly hasnt changed All we did was swap identical routers! Logged into my other windows on a partition (original user account, messy so partitioned and made a clean install, but this was long ago and no network issues ever existed) and have the old exclamation mark over signal bars - troubleshooting it causes nothing, but at least the adding network functions yields results and it says im technically connected to the router - ive tried all noted fixes above on this windows install also.
*ipconfig*
network adapter "connection specific DNS suffix:<blank>"
"ipv4address: 192.168.0.4(preferred)"
"subnet mask 255.255.255.0"
"default gateway: 192.268.0.1"
"dhcp server: 192.168.0.1"
"dns servers: 194.168.4.100, 194.168.8.100"
All other adapters are "media disconnected"
Pc specs
Win7 x64
Intel Q6600
Atheros ar922x wireless card
View 14 Replies
View Related
Dec 29, 2011
In my main office, I have a cable modem which is connected to my main E4200 router. All of my equipment (except my Ooma) is served by the E4200. The E4200 broadcasts a wireless network.In my basement, I have a Wii / entertainment center. The E4200 signal from upstairs isn't strong enough to stream video.
I bought the WET610N and have successfully set it up to interact with the E4200 wirelss network. I can hardwire my laptop to the WET610N and verify the internet works greatHowever, the Wii must connect over wireless. I have other equipment in the basement which would benefit from an internet connection. So, I want to A) connect the ESXS88W 10/100 8-port workgroup switch I have to the WET610N *AND* also broadcast a wireless signal in my basement (assuming the wireless network I see in the basement is the same "old" one from upstairs which has not benefited from the WET610N).
How can I set up my WRT54G2 to broadcast a wireless signal in the basement so that it leverages the E4200 signal served by the WET610N, while also having the workgroup switch offer hardwired connections to my other equipment (like Dish Network receiver)? It doesn't seem to work by just plugging the WRT54G2 into the workgroup switch.
View 2 Replies
View Related
Sep 5, 2012
ive been able to be on the internet on my laptop easily it would stay connected but since yesterday all the sudden i cant get on it? it says that its not connected and there are no internet connections available.
View 1 Replies
View Related
Dec 11, 2011
I have been using a TP-Link wifi adapter for last two months, It worked flawlessly till a couple of days ago. It just so happened that i turned on my computer and even though the wifi connections were available, when trying to connect this message keeps showing up " Windows was unable to connect to UoC WiFi". I have tried everything from making a new wifi connection to changing usb-ports
FYI I use the same wifi connection on my netbook and android, and they are working fine, so it's definitely not a problem with the ISP.
[code]....
View 7 Replies
View Related
Nov 25, 2012
Two days ago I booted my laptop and found that I'm not able to connect to the internet via LAN. It didn't detect a connection, even though my cable was plugged in. It was able to detect the wifi networks from my neighbors, but that's not an option, i need the LAN. I changed absolutely nothing,nno updates, downloads, ... It just came out of nowhere.I already eliminated a cable problem, the laptop from my roommate was able to connect without a problem.When I plug the cable in mine, the lights on the port flicker, making me believe that it's not a problem with my port either.it's definitely a computer problem, but I'm not sure if it's my computer or my network adapter that's being a PITA.When I go to the Device Manager, the network adapter (broadcom 802.11g) is fine, no red x or yellow exclamation point. i have already tried turning it on and off, and uninstalling and then rebooting, no avail.
View 6 Replies
View Related
Jul 19, 2012
We are planning 3 Internet Connections into our building. 1 will be for actual Internet traffic, 2nd for Voip phone system, and 3rd for internal network for Active Directory...etc. Oh the AD servers are controlled by another business so technically this line is still considered and outside line and is a T1. What I need to know is how best to make this all work so that our internet phones use the VOIP system, computers can log into the domain and access that network but use the Internet network for actual internet traffic? We were considering a series of managed switches and creating 3 VLAN's but I'm thinking we instead need a new router that all 3 networks connect to and dishes out DHCP to computers and phonesn example network is below.192.168.1.x ----> Internet (all computers use for internet traffic)72.10.10.x ----> VOIP (All physical and software phones use this network)10.10.10.x -----> Connection to external company that controls our network and has domain controllers, mainframe...etc.
View 2 Replies
View Related
Jul 3, 2011
I'd like to use 2 internet connections at the same time.Assuming there are two internet networks.Network A and Network B (both are either wireless OR one is wireless and one is wired OR both are wireless).So, now I want to use BOTH internet connections simultaneously. However, both connections will still be separate and not combined:If I had to transfer big files, then I could do this on network A.Now, I want to use network B for other "normal" internet use so that the transfer of files in network A gets the maximum speed since there is no interference with anything else.I have to let the computer know somehow that there are two connections used simultaneously. I also have to setup what programs use what connection. E.g., IE uses network a and Firefox uses network b, program "x" also uses network b, etc.I would use two network card/USB Wifi Adapers so that each network card/wifi adapter can connect to one network.
View 7 Replies
View Related
Jul 23, 2011
How to connect two or more internet connections at same time to increase internet speed ?
View 1 Replies
View Related
Jun 13, 2011
We are having dialup 15 connections in router 3845 model IOS version 12.4 1A.We are unable to have a connection between dialup branches to headquarter. these are the command
aaa new-model
!
!
aaa authentication login telnet local
aaa authentication login ppp local
aaa authentication ppp ppp local
[code].....
View 7 Replies
View Related
Oct 2, 2011
I have just moved homes and I am unable to connect wirelessly to the internet through the network in my new house. The computer is connected to the network with excellent signal strength but access shows as local only and will not connect to the internet.
All other computers have been able to connect to the internet with no problems, and my computer will connect to other wifi connections, no problem.I can connect with a wire directly to the router, but no luck with wifi. I have also had this problem with one previous wifi network. I have tried many things, including taking the compter to a computer shop for them to look at and having another professional look at it, but so far no luck.
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft� Windows Vista� Home Premium , 32 bit Processor: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz, x64 Family 6 Model 15 Stepping 13 Processor Count: 2 RAM: 2037 Mb Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 448 Mb Hard Drives: C: Total - 102720 MB, Free - 27457 MB; D: Total - 11750 MB, Free - 1681 MB; Motherboard: Hewlett-Packard, 30D9, 83.21, CND8173S5Q Antivirus: AVG Anti-Virus Free, Updated: Yes, On-Demand Scanner: Enabled
View 11 Replies
View Related
Jan 10, 2011
How can I connect Two ISPs on My LAN simultaneously in order to boost my internet connections?
View 1 Replies
View Related
Jan 14, 2012
Just bought CLEAR WiFi and un trying to connect to it on my pretty old Windows XP but when I go to network connections all I see is Local Area Connection...there's no WiFi available but my clear router is right next to my desktop & its working on my Mac Ps3 and Phone ...and I can't open my available wireless networks..
View 8 Replies
View Related
Oct 5, 2012
i cannot find any connections!! i can with a eithernet cable but i want wireless!
heres my cmd wthout the eithernet cable
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersStewart>ipconfig /all
[Code].....
View 1 Replies
View Related
Oct 22, 2011
Presently I am using a wired router for internet surfing etc. I am using 2 pc's and both have wireless connection capability. I can see that there are wireless connections in my area and they are secured connections. If possible is there a way to connect wirelessly to one of these?
View 2 Replies
View Related
Aug 22, 2011
I have a NAS connected to my network and all the computers/laptops can use it if connected via the ethernet (all use various operating systems, no static ip's). as soon as I try and use them on the wireless none of them will see the nas, they are all connected to the network and can use the internet, just no connection to the nas.My Router Ip is 192.168.1.1 and my nas IP is 192.168.1.254, I have tried setting the nas to automatically getting an ip from the router aswell but this still doesn't make any difference.
View 7 Replies
View Related
Jan 15, 2011
i am unable to connect wirelessly my wireless connection is not showing under the available connections and i can onhy connect hardwired via my router i have done simple troubleshooting with no results i have also tried to go to routerlogin.com and .net and i cant access them i have also done the pinging and everything seems to be in order what are my next steps
View 9 Replies
View Related
Dec 5, 2011
I lost connection to the wireless.I cannot find any wireless networks, which is obviously incorrect. The switch is plugged in. I can plug a cat-5 in and run fine. I can connect to the wireless with other machines fine. Something is up with this computer. I use Virtual Boxes on here and see that there is a "Virtual Box Host Only Network" that I've never noticed.I've disabled this but my wireless is still not finding anything.
View 5 Replies
View Related
Mar 18, 2012
My pc isn't picking up any wireless connections even if they have no pass on them. I don't know what the cause is I trouble shooted my wireless network connection driver 3 times I uninstalled it and reinstalled it and nothing happened. Updated it too. I even tried doing a roll back but still nothing. And when I checked the driver it says device working properly. I have a Toshiba satellite, windows xp.
View 13 Replies
View Related
Jan 13, 2011
I'm using Windows 7 I'm having problems disconnecting from individual wireless connections. When I click 'Disconnect' from the connection manager window in the bottom right corner of the screen, nothing happens at all. I've tried this on several different connections and none of them work. I'm using: Intel(R) Wireless WiFi Link 4965AGN
View 1 Replies
View Related
Dec 31, 2012
I have a Fujitsu Lifebook Series E that used to connect to the internet but will not connect now. It will not recognize or list any wireless connections available. Actually, I can't even pull up an empty list of wireless connections available. It does have a local area connection but it says a network cable is unplugged. I know it may be a faulty wireless card but I don't know how to test it or, if it is bad, where the find it to replace it.
View 14 Replies
View Related
Jul 4, 2011
i have a Dell Latitude D810. I just wiped and reinstalled the OS. i have updated everything from windows update including chipnet,.Net, flashed the bios, and did a scan, and updated drivers. i have tried to update drivers from the original CD.problem: I cannot seem to get the computer to realize it has an internal network card. there is no switch on laptop. i have tried manually updating drivers, performing scans, etc. when i go to Dell website, it says to go to network connections, and click on the Wireless Connection to set it up, but that option is not there (only LAN). i am on internet through LAN but cannot see anything wireless to set up.when i am finally able to see wireless options, i want to connect to my existing network, so i do not need to set up a new network.
View 8 Replies
View Related
Jul 5, 2012
It has connected to my wireless router before, now all of the sudden it won't show any connections at all, all it says is 'no connections are available'. Other devices are currently on the same network, the physical switch is on, I tried troubleshooting but no luck.
View 1 Replies
View Related
Jul 3, 2011
my computer cant find any wireless connections
View 1 Replies
View Related
Apr 23, 2011
My Internet surveillance stopped working
View 1 Replies
View Related
Aug 8, 2011
I have a wireless router (an Actiontec PK5000) and two desktop computers that connect with USB wireless adapters. I'm looking for a way to stop one of those computers from connecting wirelessly, without disconnecting the other.I used to have a wired ethernet connection, but since I've moved my computer to a different room I've had to rely on a wireless connection. Previously, I shut off the wireless in the house whenever other people were hogging bandwidth, but now that's not an option, as it would shut me down too.
View 3 Replies
View Related
Dec 14, 2012
I going to put have of the PCs on the wired and few want to do wireless. The company want the printers and scanners on the wireless. So how will the wired PCs find the wireless printer and scanner.
View 1 Replies
View Related
Jan 24, 2012
I have windows 7 PC. On the normal bases it has 3 internet connections 2 wireless and 1 hardwired. The 2 wireless are used for internet access and the hardwired is for my LAN through my router. The wireless connections are throught ATT mobile devices. I use my lan to share files through PC in my household and it has no internet access. The problem is that whenever I have all 3 of these connections connected windows always sees the hardwire connection as internet access so I can't use the internet even if my 2 other wireless connections are enabled. However, If I disable the Local area network connections and the leave 2 wireless connections enabled I have internet again.is there a way to just make windows use the hardwired connection as local and use the wireless connections for internet?
View 1 Replies
View Related
Apr 23, 2011
I am having laptop and using wireless network one my own and second my next door both different password but i am able to use one at one time can i connect both same time so that my speed goes up
View 1 Replies
View Related
Aug 27, 2011
My laptop has suddenly stopped connecting wirelessly. Just fine with ethernet though. My Wireless adapter is enabled and showing fine in Device Manager and has the latest driver. Wireless Zero Configuration is enabled in services. I tried simply disabling and then re-enabling the wireless adapter but still no luck. I tried selecting the repair option for the wireless adapter and I get the exclamation in yellow triangle deal. I checked to see if I was having issues with firewall and that's not it either. When I click "View Available Wireless Networks" the dozen or so networks that use to appear are gone. I power cycled and reset my modem with no luck. I've also did an ipconfig /release and ipconfig /renew in CMD but nothing changed. I have not changed any wireless settings for my NIC or modem/router and don't understand what else I can do.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsJohn>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : john-433101c601
Primary Dns Suffix . . . . . . . :
[code]....
View 5 Replies
View Related
Sep 3, 2012
I have been having a peculiar problem lately with my wireless set-up. I have a very simple and standard setup.My main desktop pc is connected to my TP Link TL-WR841ND wireless router and that is connected to my issued Time Warner cable modem. In my room I have a desktop pc with a TP Link TL-WN722N wireless adapter and my brother has a PlayStation 3 in his room.For months I have had flawless wireless internet connection between my desktops and PlayStation 3, but for the past few days I noticed that when the main desktop is on it prevents my adapter and PlayStation from making wireless connections to the router.
The only time my desktop with the adapter and PlayStation 3 is able to connect is only when the main desktop is turned off or physically disconnected from the router. Now, I have tried uninstalling and reinstalling the Ethernet driver, resetting both the modem and router, and setting everything up from square one to no avail. I know it has to be something simple but I'm hoping I won't have to format my main desktop PC.
When I log into the routers configuration page through internet explorer and check the Wireless Statistics page showing the currently connected wireless stations and packets, I have noticed that very few packets are being sent out, like the adapter and PlayStation 3 are being blocked by the desktop. I had Norton installed on it a week or two ago just to do a quick scan, then I uninstalled it.
View 6 Replies
View Related
