(WNA3100) / Created New Network By Accident - Other Computers Can't Connect
Jul 8, 2011
I have had a netgear router for some time now (WNR2000) for three home computers, all Windows Vista+ and recently had to buy a new wireless adapter for one of them (WNA3100). Previously, all computers were connected to a security-enabled network called 'Johnson'.I installed the new adapter via the wizard and it ended up creating a new network entitled 'NTGR_zhOXSTT8ZSXtTUsaRd5lXfrq-WPS'. Johnson has now disappeared from the list and no other computer is able to connect to this new network. I tried changing from WPA2 to WEP and changing the password in hopes that the other computers will be able to login but it didn't work.
I bought a Netgear WNA3100 wireless adapter today but when connecting, it says limited access after entering the SSID and the passphrase. I currently have windows 7.
I have a Windows 8 Pro laptop, and a new Windows 7 Laptop. When I try to setup the connection so that I can share files and folders between the two computers, I am asked for the User name and the password. I see the password in the homegroup, but entering it does nWhat is the user name in this case? My computer name or the other computer name or something else
I just loaded up my machine with Windows Vista Home Basic and wanted to connect my another laptop to it via Wireless AdHoc network. I created a wireless adhoc network from the network and sharing center. But was unable to connect the other laptop to it. Everything is ok. My WLAN is on, drivers are also latest.[code]
I was trying to connect to the wireless connection at the house i just moved into, and while connecting i was prompted to create a network and, foolishly, did so. I created the new network and a password for it, but now i don't know the password, and no one in the house can use the internet. when i try to connect it just says the security password is incorrec[CODE]
I have a dell desktop running windows vista that connects to my wireless router with a cable. I have an HP laptop that is running windows 7 that is wireless.When I look at network computers on the dell I get an error message that says that the computer is not accessible. The same thing happens when I try to log onto the desktop from the laptop. When I try to run the network wizard from the desktop, I see see connect to the internet, connect to a wireless router or access point, setup a dialup connection and connect to a workplace.None of them make sense but I tried connect to a wireless router and got a message that said to set it up manually or set up a flash drive, neither of which makes sense. I tried set it up manually and all that happened is the router setup screen opened up.I tried the same thing on the laptop and the setup the network wizard opened a screen that said choose a wireless router or access point to configure, but nothing ever showed up on that screen.
I have set up a wireless network in my home using s d-link N+ 300 DIR-655 and the desktop that is directly connected to the modem and router can connect to the internet and my laptop can access the wireless network and get online but I have another desktop that cannot connect to the wireless network. It can see it but when i try and connect i get the message that it was unable to connect or sometimes that i was able to connect but have limited connectivity.
I'm trying to connect my two computer (XP and Win 7) using a crossover cable. I set the the IP as 192.168.0.1 and 192.168.0.2.The computers can see each each other and I can access the public folder of the win7-machine on my XP-machine. However, if I try accessing the xp-machine it says:
I have a Windows 2003 SP2 server with a shared folder. This folder is accessed by 2 people on a regular basis. The problem we are experiencing is when a folder is created by user A, it cannot be moved by user B (and vice versa), as it says the folder is in use.The exact error is: Error Moving File or Folder.Cannot move <filename>: Access is denied.Make sure the disk is not full or write-protected and that the file is not currently in use.I have explicitly set full control for both users on the folder. The drive has 70GB of 500GB remaining. I have also used File Server Management to verify the files were not in use when they were being moved.The server is Windows 2003, SP2. Domain environment, with all relevant users having permissions on the folder, and the everyone account removed. Any other operation inside the shared folder works fine.
I have a Netgear Wireless USB Adapter (WNA3100) for my PC. The router is in the other room (approx 5-6 meters away) connected to my flatmates laptop. The adapter worked fine for almost two months, but at the past 2 weeks it keeps disconnecting in every 2-15 minutes, for 1-3 minutes. I have Windows 7 and I'm not familiar with networking issues so the only thing I did was to reinstall the driver and update it, but this didn't work.
Internet connection seems like it drops and comes back up every couple of seconds. Not just little drops, wont load a web page and lag me out of games drop. Usefully only for a few hours at most. But its been a full day this time. Ive been searching all all over the place and nothing is working. So with that I have a Netgear WNA3100 picking up wireless from my land lords up stairs. Not sure their router Id but Im pretty sure the problem is on my end. Ive downloaded and reinstalled updated driver, and I have "excellent" connection all the time, according to windows and netgears software. Ive tried pinging and I only lost one packet once (at yahoo.com) out of probably 100 pings, literally Ive been sitting here for a while, to the ip and some sites.
OK, so what is going wrong, I just bought this new HP computer windows 8 on Sat, have hooked up my net gear N300 WNA3100, and still can't get on line, and it was working fine on my windows XP machine, but it was 7 years old, and giving me trouble, and my WNA is less than 9 months old, so where do I go from here,
how can i check if my netgear N300 adapter wna3100 is compatible with apple tv device I was told that I needed a dual band router to play HD movies from itunes (ipad)
i'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?
I have a home wireless network and my service provider is Suddenlink. I use a DLink modem and have two Tosiba laptops. All of this has been working fine until this morning when one of the laptops won't connect to the internet. when I run the trouble shooting guides on it I get messages that the problem is that the modem won't connect to the internet. However, the other laptop (this one) is working fine. when I look at the network map i see both computers and a green line to the modem. on this computer, there is also a green line from modem to internet. the other computer shows a res x on the modem to internet line. this is a sudden change i have restarted the computer the modem and the router. I can also conenect this computer to the internet via a mifi that I have but not the other laptop. there are no red x's on any of the hardware when I go to the "manage" computer.
Here is my setup: 1- laptop1 is windows 7 with 192.168.1.1, submask 255.255.255.0 2- laptop2 is windows XP with 192.168.1.2, same submask as above. Laptop1 connects via CAT5 (non-crossover) RJ-45 into a switch (port 1). Laptop2 connects via CAT5 (non-crossover) RJ-45 into port 2 of switch. Both ends of the CAT5 are, of course, connected into each laptop's network connector.pinging resulted in timed out from both.
I have two computer but one monitor. and i wanna connect both computer with one monitor, one keyboard & one mouse. Like KVM switch. but if i connect with KVM switch then i can turn on one at a time & if i wanna use another one so i hv to turn off first one.
so how can we connect 4 remote computers so dat they can share data,as well as if data is updated on 1 pc ...it is automatically updated on rest 3.....
my three computers cannot connect to the internet, they were fine last night now it says. cannot comunicate with primary sever, do you think it is my comp or sever.
I have 3 systems. I would like to connect PC 1 to PC 2 & 3 .But not between 2 & 3. ie. 3 & 2 must be connected to PC 1. I want gigabit connection between them. The purpose is realtime streaming of audio from PC 2 & PC 3 to PC 1. The only data that goes fom PC 1 to 2 & 3 is MIDI information and automation. The problem now is that I'm having dropouts in audio, and bandwidth limitation.
whether using a dual port PCI-e lan card on PC 1 and single port card on PCs 2 & 3 or using a gigabit switch would be better. how to configure the ports for this type of a connection ( if possible that is ). Does using dedicated network cards with on-board processors and ram take all the networking load off the system's cpu and ram.
First 3 days ago i came in to my work and my 2 Desktop computers where not connecting to the internet. After trouble shooting i found that my cell phone and wireless computer would connect. then hardwiring with my cat5 cable my laptop worked as well. i couldn't connect to the router as well from the 2 Desktop computers. restarted every thing router modem computers ext. nothing.Then i tried ping tests nothing could not ping each other or the router. though the network map clealy told me the ip addresses of each computer and that it was connecting. then as though from random i tried again to log in to the router. 192.168.2.1 and one of my computers found it and could then connect to the internet.
How to connect my 5 computers to an internet. i already have a hub and lan connections but the other 4 computers still don't have internet connections.
I'm having iball laptop with LAN connectivity in Windows XP Service Pack 3. I found out how to create hotspot on laptop and tried it.Everything gone fine, network is showing up in my Ipod Touch too. But even after connecting to this network,I cannot access internet!Then I checked in Network Connections that both LAN & Wireless Connections are connected,but in Wireless Connection when checked in status the packets are sending but not receiving.This is how it shows with the command "ipconfig"....
I have 3 Twitter accounts that all work fine on my iphone and my sony experia phone but I can not get into twitter on my home cpu because I cant find the email address that I used to start the account i tell them i lost it so they email it to my email address on file that they wont share. So I need to find out every single email account i have set up in the last 2 years.How do i do that? I tried the option to security to optioms again and nothing for twitter. I need those account on my desk so i can send photos off my hard drive.
I have an XP machine that is unable to see any other computer on the network. I disabled the firewall and I can ping any device on the network with no issue. I have set several other computers to the same workgroup which is mshome. Lastly I have read several other post and tried the ideas there including this one...Finally, let's do the stack repair.TCP/IP stack repair options for use with Windows XP with SP2.
Start, ]R[/B]un, CMD to open a command prompt:
In the command prompt window that opens, type type the following commands:
Note: Type only the text in bold for the following commands.
Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log
Reboot the machine.That did not seem to work. As I am still in the same situation.
another note. This is the only XP on the network. Everyone else is Windows 7. Also on a side note, the reason I am doing this is to install a printer on this one and allow the other computers to print from it and seeing folders is good also.
I have a wireless router which works just fine. I can connect my laptop as well as my iPad to it. I also have a hard wire connection that goes to my computer which works just fine. how can I get my computer to see the other computers in the network? They just don't show up even though I have shared enabled. There is only one router, so I thought it might be automatic, but it doesn't seem to be.
I have two identical computers on the same home network (and a couple of others too). My problem is the even though they are connected to the same wireless router and can each see the internet and the printer that online they cannot see each other. When I ping one from the other I get no response though they both receive responses from the router. I can't transfer files etc. It works a while ago but can't seem to get them connected again.
