Hotspot Created But No Internet Access?
Dec 16, 2012
I'm having iball laptop with LAN connectivity in Windows XP Service Pack 3. I found out how to create hotspot on laptop and tried it.Everything gone fine, network is showing up in my Ipod Touch too. But even after connecting to this network,I cannot access internet!Then I checked in Network Connections that both LAN & Wireless Connections are connected,but in Wireless Connection when checked in status the packets are sending but not receiving.This is how it shows with the command "ipconfig"....
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and Settingsadmin>ipconfig
Windows IP Configuration
Ethernet adapter Wireless Network Connection:[code.....]
View 4 Replies
ADVERTISEMENT
May 9, 2012
I am trying to unravel a ASA 5550 config that has been created over several years, by multiple people, some who used ADSM, some who used CLI.
None of them ever removed any lines from the configuration, and none did any documentation. When examining the actual configuration from a CLI perspective:
1. Does an ADSM- created access list end with any specific ADSM- added suffix?
2. When ANY access list is created in an ASA 5550, does it HAVE to be included in the access-group command to be functional? Can it also be functional if referenced in a "nat" command?
3. If the access list does meet either of the criteria specified in question #2, is it completely non-functional?
4. If an access list is applied to a logical or physical port that is shut down, is the access list functional?
View 4 Replies
View Related
Mar 2, 2011
I have a 3725 routeur configured to receive the PPP/ATM/DSL connexion of our customer. I have found that the routeur has created 1035 virtual-access (1035 is his max) but I only have 85 customer on this router
View 1 Replies
View Related
Apr 30, 2013
Yesterday, I configured ASA via CLI for Static PAT and created some entries in an access-list. I will be testing that setup this evening.
However on a quick double check of the settings on the device via ASDM I could not see the acess-list settings. I searched every tab and found nothing so I PuTTYed into the device and checked the running config. The rules I created were right there. Is this something I should expect? If so doesn't it defeat the point of having a GUI if it does not show a complete running config?
View 2 Replies
View Related
Oct 12, 2011
I have 6513 which have wism and sup 720 , for some reason the access points keeps on going up and down the port channels created automatically but i cannot see any configuration inside it as shown below .I tried to edit the interfaces and add the trunk configuration but it cannot be modified . [code] the Wism status is showing up but the APs Number regestered keeps on going up and down the version running on the sup 720 is 12.2(33)SXI5 and the wism is installed in slot 9.
View 5 Replies
View Related
Aug 2, 2012
We are having issue on our internet connection, before our Access Points you can use it without any problem... but now you need to put ip on the device so you can access to the internet, added info we are using Antamedia Hotspot Software installed.
View 6 Replies
View Related
Aug 24, 2012
I am using an IPhone 4 as a hotspot to wirelessly connect my pc to the internet using a medialink wireless USB adapter. It says I am connected the IPhone says I am connecte3d but when I click on internet explorer it says web page not available.
View 2 Replies
View Related
Jan 17, 2013
I just bought a laptop installed with Windows 8. I want to connect my iPhone to the Internet through the laptop. I have tried using Connectify to set up a WiFi hotspot. It works only with WEP and my iPhone can connect to the Internet but my iPhone disconnects from the hotspot after a while and I need to restart my Connectify hotspot, which is really annoying.I googled online and find that I can use the netsh command to set up the hotspot. I run command prompt in administrator mode and type in the following:
netsh wlan set hostednetwork mode=allow ssid=adhocnetwork key=password
netsh wlan start hostednetwork
And then I share the wired network through control panel > network connections > ethernet > properties.I connect my iPhone to the hosted network and typed in the password. I see a tick next to the SSID, meaning it can connect to the hosted network.I also check the status of the hosted network. Both IPv4 and IPv6 connectivity show Internet.But when I open Safari on my iPhone, it says no Internet.
View 1 Replies
View Related
Jan 20, 2012
1st. I have a desktop and nearby there is wireless internet WiFi hotspot. How can I connect it to the wireless internet WiFi? I am thinking of buying this: http:[url]....Apart from that adapter do I need something else?
2nd. Where the desktop is, I have no reception. I mean because my cellphone has no reception when it is in the same place where the desktop is. But when I put my cellphone in the window around 12 feet away, there is reception. So I am wondering if I can make a 12 feet long USB cable from the desktop to the window and with the Wifi/WLAN Wireless Network USB Adapter in the window.
View 5 Replies
View Related
Jul 13, 2012
I have a router attached to my Dell desktop running Windows 7 and am trying to install the AE2500. Instead of using the router, I want the AE-2500 to access my HotSpot wifi on my cell phone. I go through the AE2500 installation and Device Manager shows it is installed properly. However, I do not see the adapter in my list of available wireless connections and I'm unabley to disconnect my router connection. I keep clicking disconnect but it never does.
View 1 Replies
View Related
Jun 16, 2013
I am using the Vostro 3360 with win 7, I did used the hotspot station software accomplish with the WiFi driver before and worked fine. However, the hotspot is not working as the ipv4 is showing 'no internet connect'. And my iPhone cannot connect it too.
View 1 Replies
View Related
Aug 24, 2012
I have 3 Twitter accounts that all work fine on my iphone and my sony experia phone but I can not get into twitter on my home cpu because I cant find the email address that I used to start the account i tell them i lost it so they email it to my email address on file that they wont share. So I need to find out every single email account i have set up in the last 2 years.How do i do that? I tried the option to security to optioms again and nothing for twitter. I need those account on my desk so i can send photos off my hard drive.
View 1 Replies
View Related
Oct 8, 2011
I was trying to connect to the wireless connection at the house i just moved into, and while connecting i was prompted to create a network and, foolishly, did so. I created the new network and a password for it, but now i don't know the password, and no one in the house can use the internet. when i try to connect it just says the security password is incorrec[CODE]
View 5 Replies
View Related
Jan 23, 2012
the shared resource was not created at this time
View 1 Replies
View Related
Mar 7, 2013
How do i create and manage 40 user accounts on a windows 7 PC.
View 1 Replies
View Related
Mar 15, 2011
Did any know that how many AP Groups can be created by one Controller? (5508) May I have 100 AP Groups?
View 3 Replies
View Related
Mar 26, 2011
Restoring a BARS file created from one server onto a different server?
View 6 Replies
View Related
Jul 8, 2011
I have had a netgear router for some time now (WNR2000) for three home computers, all Windows Vista+ and recently had to buy a new wireless adapter for one of them (WNA3100). Previously, all computers were connected to a security-enabled network called 'Johnson'.I installed the new adapter via the wizard and it ended up creating a new network entitled 'NTGR_zhOXSTT8ZSXtTUsaRd5lXfrq-WPS'. Johnson has now disappeared from the list and no other computer is able to connect to this new network. I tried changing from WPA2 to WEP and changing the password in hopes that the other computers will be able to login but it didn't work.
View 1 Replies
View Related
Apr 18, 2012
I bought my WAG320N 1 year ago, in this time i tried to connect in wireless mode many times, but I can' see the SSID that I have created from my laptop and from my palm. At the beginning, when the router was new i saw 2 or 3 times the SSID for 2 minutes, and after this time the SSID disappear. Is my WAG320N damaged?
View 5 Replies
View Related
May 27, 2013
I managed to create VLAN 30 (mgmt) and VLAN 888 (blackhole) on this SG 300 switch. Now I've configured ports 1-6 untagged on VLAN 30 and left ports 7-8 untagged in VLAN 1. Port 10 is my uplink to my router, which config looks like this:
interface gigabitethernet10
spanning-tree portfast
spanning-tree guard root
switchport trunk allowed vlan add 30
switchport trunk native vlan 888
If I connect a device into port 7 or 8, I get no IP address from the relevant DHCP server on my router. Thus, I thought I could add VLAN 1 to the trunk, but here's the surprise:
swi01-zg-#configure t
swi01-zg(config)#int gi10
swi01-zg(config-if)#switchport trunk allowed vlan add 1
VLAN 1 : VLAN was not created by user.
View 6 Replies
View Related
Jan 29, 2013
I intend to create ACS local account from file. What is maximum of accounts can be in ACS 4.2?
View 1 Replies
View Related
Apr 7, 2013
I have a cisco ISE 3355 and WLC 5508 and microsoft Active Directory 2008. I joind the ISE to the ADe successfully and I can see all groups on the AD, also I integrated the ISE with the WLC. my problem is when I created the Authentication policy on the ISE and joined to the AP by the PC nothing applied to the PC.
WLC version 7.4
ISE version 1.1.1.268
View 5 Replies
View Related
Sep 13, 2012
Can a pix 501 firewall VPN be created with a 10 user restricted license? It seems impossible to get an answer because Cisco's black mailing EOL policy.
View 18 Replies
View Related
Sep 7, 2012
We have a dsl connection on 897 dsl router at the customers HO.The telephone line is directly connected to router we configured dialer with username and password and it takes a static ip of 212.249.213.xxx.Now he has some branches that are connected through wireless links and he has arranged for a subnet of 8 public IP's in the range 72.70.245.xxx
Can we some how use these public ip's as secondary in the routers dialer interface and assign to the servers in the branches so that it can be accessed through web.
View 1 Replies
View Related
May 14, 2011
I have a Windows 2003 SP2 server with a shared folder. This folder is accessed by 2 people on a regular basis. The problem we are experiencing is when a folder is created by user A, it cannot be moved by user B (and vice versa), as it says the folder is in use.The exact error is: Error Moving File or Folder.Cannot move <filename>: Access is denied.Make sure the disk is not full or write-protected and that the file is not currently in use.I have explicitly set full control for both users on the folder. The drive has 70GB of 500GB remaining. I have also used File Server Management to verify the files were not in use when they were being moved.The server is Windows 2003, SP2. Domain environment, with all relevant users having permissions on the folder, and the everyone account removed. Any other operation inside the shared folder works fine.
View 2 Replies
View Related
Feb 23, 2013
I'd like to setup a Captive Portal on our WAP321. We will probably have 50 users (although there will probably be less than 10 simultaneous users). What is the maximum number of Captive Portal users (when using the "local" verification option) that I can create on a WAP321?
View 3 Replies
View Related
Jul 7, 2011
How many SSID can be create in a 4404 controller and also in standalone 1250 AP? How many VLANs can be created in eac one?
View 2 Replies
View Related
Nov 13, 2012
Catalyst 6509E Switch running IOS version 12.2. Created a new VLAN layer 2, created it layer 3 with an IP address. Issued the state active command and the no shutdown command. when doing a show vlan, shows in the list and active. When doing show int vlan xx, shows as down. Need to get it to be up, have attempted to assign a port to that VLAN in hopes it will come up, but still no go.
View 5 Replies
View Related
Jul 5, 2012
How many user accounts i can create to a Cisco ASA box? Say for example a Cisco ASA 5510 or Cisco ASA 5520?
View 5 Replies
View Related
Jun 21, 2012
Created 2 separate VLANs on SGE2010P switch. Neither in Native VLAN 1.
For example;
-Port g01 in VLAN 56
-Port g25 in VLAN 56
-Port g10 in VLAN 10
-Port g37 in VLAN 10
All appears to work well within the respective VLAN (i.e. DHCP, ARP, etc. no IPs from other VLANs)STP - Spanning Tree is Globally disabled.
However; when I feed a n new network (which has STP enabled) into VLAN 10; I then plug a laptop with wireshark running into VLAN 56 - cannot see any other traffic/packet...except STP packets coming from a CISCO device on VLAN 10 while I am plugged into VLAN 56.
This demonstrates to me the network is not truely seperated. I know this because last night I crossed two networks and caused havoc; ouch.I configed a D-Link switch with the same scenario and no issue.
View 5 Replies
View Related
Dec 30, 2011
I am trying to configure my ASA5505 to allow SMTP relay and the ACLStatic I created is not working. [code]
View 3 Replies
View Related
Dec 9, 2012
In my setup , i have one core switch 4506, 3750 access switches and 4948 server switch.i have created the mngmt VLAN in every switch.the problem is i can ping the every device mngmt ip from any internal network,but my server switch mngmt ip i am not able to ping.trunk link is configure between the core and server,access switches.What is the problem with 4948 switch?
View 7 Replies
View Related
Mar 7, 2012
i have a problem with our new 5508 wireless controller (7.0.116.0).
Port 1 is the system default "management" (Port 2 is backup). Dynamic AP Management is disabled. Port 3 is a new dynamic interface "ap-manager 2" with Dynamic AP Management enabled and has a ip in a seperated VLAN which is not routed.
When i am connecting the AP (1260 series) to the "ap-manager 2" interface, then it will not join and i get an error message on the WLC:
*spamApTask1: Mar 05 14:52:12.783: %CAPWAP- -DISC_INTF_ERR1:capwap_ac_sm.c:1453 Ignoring discovery request received on non-managementinterface (3) from AP
When i am connecting the AP to the "management2 interface, then it is working fine. But i don't want the APs in the Management LAN. I want them in the separated no routed LAN explicit for the APs.
View 5 Replies
View Related
