The wireless in our condo requires a user and password to be submitted via a browser to connect to the network. My bluray player does not give this option or have the ability. Is there a way to accomplish this? Is there a bridge or router that can make the authentication to the wireless in the building that I could then connect the blu ray to?
View 10 RepliesRegion : UnitedKingdom
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
ISP :
I am trying to work out how I can use the WR702 to connect to a Hotel's wireless connection. As with most modern hotel setups, the hotel requires the user to access a web browser and enter the room number and select a purchase plan.I believe there must be a way that I can connect the WR702 to the hotel's network and then use a browser on a linked (wireless or ethernet) laptop to launch the browser and log in, however, I have tried every default configuration on the WR702 and cannot find a solution.
Setup:
WR702 router
HP EliteBook 8440p laptop (ethernet and wifi available)
Hotel wifi (multiple identical SSIDs in the survey but shows as a single wifi name on my iPhone)
I have been trying to convince my bosses, the IT department, and others where I work, in a small call center, to switch to a different browser other than IE. The reason is IE times out on the techs a lot and freezes up constantly. I am able to use Firefox and Chrome at the lead station and do not have any issues, but the only browser currently allowed on the techs computers is IE. The reason I am getting as to why this is not possible is that with IE, IT is able to block certain options in IE from being changed such as proxy settings, add-ons, and advanced settings, but that these settings cannot be blocked or managed in firefox and chrome.
View 4 Replies View RelatedI have been using this wireless internet connection for a long time, but the other day I went to go online, it didn't work. Ive tried lots of things but nothing seems to work.I'm able to acess the same wifi from my phone and it works fine, so i know its not the actual network, its something on my side.pics of xirrus screenshot & intel proset config attached[CODE]
View 11 Replies View RelatedAbout a week ago my mom (unknowingly to me) installed a registry "booster" (Uniblue Registry Booster) and as expected, it messed some stuff up. As soon as she finished scanning and it "fixed" all her registry issues, she could no longer load webpages in her browser.PC was running XP at the time of the corruption, none of her system restore points work, and unfortunately her automatic backups had stopped running about 2 months ago without me knowing. She's been planning to switch to Windows 7 soon anyway so after a few days of trying to find a solution and not having any luck I thought "well maybe if we upgrade it will unintentionally fix some files / settings during the install." Going from XP to Windows 7 was no fun task itself, but after many hours of installs I had it upgraded to Vista and then to 7.
View 15 Replies View RelatedWe are getting browser redirects on our Netgear home network. It's happening on 3 computers (2 LAN, 1 wireless) and on a cell phone. Have scanned the computers with AVG, Malwarebytes and Super Antispyware.I have to believe it's in the router
View 1 Replies View RelatedI am experiencing problems trying to access my routers HTTP-type configuration. I have a Billion 400G router. The address to access the router was always http://10.0.0.2 and that has always worked. A dialog box would appear asking for a username and password. Now it doesn't even reach that screen. It says that the connection timed out. I've tried Firefox/Chrome/IE10. To no avail. My system: Windows 8 build 9500. Also something weird. When I type in this Microsoft thing comes up with IIS 8.
View 2 Replies View RelatedI'm facing a problem related to devices authenticating to our wireless network. Below are how it is setup:WLC 4404 pass authentication to ACS 5.3 (PEAP + MsChapV2) then to AD server.Client can get stock in this status and it keeps repeating from 1 to 20.
View 4 Replies View RelatedCan we change the internal web authentication for guest network to use http instead of https?
View 3 Replies View RelatedI have successfully set up a guest network on my EA4500. Guest laptop associates with guest SSID just fine. Then via IE, it gets prompted for the guest password, which is entered and accepted just fine. At this point guest laptop is on the network.
BUT... at some point the guest laptop will need to reauthenticate (I don't know what the timeout is, but maybe one or two days?). Anyway, it's at this point that IE presents the guest network login page. But now after typing in the password, "enter" or clicking on the button does nothing. It looks like the guest web page doesn't get loaded properly or completely, so the reauthentication can't complete, therefore can't get to the internet. So, while in this state, I've also tried Firefox and Chrome, and same thing, no action when trying to submit the guest password. Tried rebooting guest laptop, and still same problem. Only thing I've found so far that works is to reboot the router. So I'm guessing there's a problem with the guest/web server on the router?? It's a real pain to have to reboot the router every day or two, when I've had other Linksys routers run for months without having to touch them.
I was running CCC 2.1.38 when I first noticed the problem. Since then I've downgraded to Classic 2.0.37, but it seems I still have the same problem. Again, I can connect & authenticate just fine initially, but when reprompted after some period of time, it doesn't work.
I've tried contacting Cisco support, but it looks like I'm at 91 days since purchase and thus outside of my 90-day complimentary support, so they happily provided me with the premium support options just to have the honor of talking with them. Guess I shouldn't have spent so much time trying to figure this out myself.
What's the least expensive way to enable Guest Network authentication in a network with WLC 4404 controllers and no WCS? Management would like guests to register with a valid email address and enter a 'password du jour' to keep unauthenticated users from chewing up bandwith with automatic connections.
View 4 Replies View RelatedI have the wireless connection working and when I try to browse information on the any browser like Firefox, Internet Explorer, Chrome, Opera and all but it cannot connect.It display a message saying "Connection closed by the remote server" in Opera and in other browser it doesn't display anything even after several times of refresh.I also tried restarting the system and it connect the home page of the browser and when I open the link in new tab it doesn't go to that link.
View 1 Replies View RelatedBrowsers will not download certain files. They often get stuck at 300-400 kb, but some other files are ok. Eg. I can never download Java 64 from filehippo, whereas CCleaner is good to go from filehippo.WirelessTried with no firewall, no antivirusprogram.My other computer wireless downloads.Tried different drivers to network adapter.
View 1 Replies View RelatedOut of the blue my wireless connection stopped working, my browser cannot connect, I don't know what to do. I have a Samsung laptop that's running on Windows 7. I thought it was the browser so I installed the Internet Explorer 9 and while doing so it was able to download the updates but when I open up the browser it still doesn't work.
I'm thinking that it might be a network problem but I've ran out of ideas. I have a netgear router that's connecting a desktop computer, two VOIP devices, my sisters Mac works but we have two laptop that aren't working. I've also tried connecting it directly to an ethernet cable from the router but it's still not able to open the browser.
I am new to cisco products and I am trying to setup an aironet 1242ag. I have figured out the ip given to it but, cannot access it with a browser.
View 6 Replies View RelatedWe have three AD/DCs (2) in the datacenter and (1) locally
A couple of our users cannot:
Install a program that authenticates against AD
Create Mapped drives on their workstations
All of these users have full local Admin rights on their workstations.
I've restarted all the AD/DCs
I've checked and modified local security policy a couple of different ways.
I've checked Kebros authentication logs for errors.
On the static machines I've individually tested each of the DNS servers with no issues.
Here's the weird part:
Take those same machines...and move them into our static IP range 10.10.1.2-254 and boom ( things start working) .
Example of our network
10.10.1.1 /24 256 addresses Static Win 2003 R2
10.10.2.1 /23 512 addresses DHCP via ASA 5505 at a remote site
10.10.4.4 /23 512 addresses DHCP Win 2003 R2 with some of the addresses excluded at the datacenter and the other addresses excluded from distribution locally: This is so that when we have an outage machines don't go nuts from the loss of contact to the DHCP at the datacenter.
10.10.8.1 /22 1024 addresses DHCP Win 2003 R2 Not in use currently.
I can't access the router through the IP within the browser. It's an older WRT54G. I've never used the downloaded software that allows you to connect to it, but that's what I was going to try.
View 1 Replies View RelatedBefore the latest update and with the latest update, after about one week, I cannot access the router wirelessly using 192.168.1.1. Using IE 10, Chrome, and FireFox all give me no response. I type in the address and the web page never changes. It keeps me at the home page of my browser. I do not get any errors or messages.
Also I tried to use the DHCP Reservation page, and the names of the devices will not allow spaces or any special characters. Sure would be nice to allow such.
I just noticed that my router reverted back to 1.1.28.146856. I have updated twice via the web browser to version 1.1.28.147876 and once via direct connection and the downloaded file, but the router keeps reverting back to the older firmware.
I have a wireless controller 2100. I can't access it via browser, when I am connected to one of its physical ports. I use the same subnet ip address as that of the management interface of the wlc.
View 5 Replies View RelatedI have installed my E3200 downstream from the Verizon FiOS Actiontec (going the other way disables FiOS functions). 1. My browser can get to the E3200 (192.168.1.2) when connected via wireless, but not when connected via ethernet cable. 2. When going to connect wirelessly, the 2GHz connection is visible but the 5 GHz connection is not (I have them named differently). How do I see both wireless connections?
View 9 Replies View RelatedWhen I try to access the browser based utility through the address bar, I don't have the username or password.....tried admin for both and for just the pw. When I try to access advanced settings through Cisco Connects router settings / advanced settings, it comes up as if many objects were unable to load. Linksys E2500.
View 7 Replies View RelatedI am unable to access my router through the ip address (192.168.1.1) even though I have verified that is the address. To be sure, I did an ipconfig release/renew, but no results. I want to limit a user's network access by MAC address and I don't think I can do that without accessing the router thru the ip address.
View 2 Replies View RelatedI have the guest Access enabled on my E4200 but I can't get any of the apple devices or dell laptops to show the LOGIN screen in the web browser.
View 1 Replies View RelatedNot sure how I got here, but I cannot now connect to the E3000 using the Browser Utility. USing https://10.x.x.x, shows certificate warning page, then when I continue "Internet Explorer cannot display the webpage".DId NOT change the host hame.Last time I used the Browser Utility (weeks ago) was to disable the wireless to check something. Reenabled the wireless, no apparent problems until today when I tried to access via the Browser Utility.As I never ran Connect, there are no settings to change, and now it cannot detect the device.I guess I'll wait until I HAVE to change something, and do a 30-30-30 reset.
View 1 Replies View RelatedI am tryign to set up an Aironet 1142, I have created a reserrvation in DHCP using the MAC address, and the reservation shows as active, but I cannot connect to the device with my browser.
View 1 Replies View RelatedI am behind a SQUID proxy.I need to set proxy settings for cmd.I'm using win7 so proxycfg cannot be used.I used netsh like this: netsh winhttp import proxy source=ie
Internet explorer had my proxy settings already.Now the problem my proxy requires username/password authentication.I do not know how to set the username and password in command prompt.
I'm sure it can be done just haven't been able to find it. I'm running ACS 4.2 and have 2 network groups, one is wireless where I have a WLC and the other is the default where vpn users authenticate with their tokens. Is there a way to have the Wireless network group authenticate using AD and the other group use RSA? I can't find the switch or switches I need.
View 1 Replies View RelatedMy Motorola 850G router is several years old and working fine. However, my wi-fi connection is presently "unsecured" and I need some assistance as to how to go about setting up a secure network. My browser is not recognizing the router's default IP address.
View 1 Replies View RelatedI have EA4500 acting as a router on domainless all-Windows network of two XP machines.Unfortunately, EA4500 aggressively grabs the role of the Master Browser (I am talking about Computer Browser Service) on the network (regardless in which order you power the devices up) and then doesn't serve as a working Master Browser - both Windows machines stop listing the network computers in the "Network Neighborhood" and incur massive timeouts when attempting to view the listing.A quick look with 'browstat.exe status' reveals that indeed the router has announced itself as a Master Browser device, but returns errors when you query it.Quite predictably, without the router, both machinces figure out amongst each other who will be the Master Browser and everything works fine. The problems begin only when you add the router to the network.
1) Is there any way to make EA4500 work like a full-blown Master Browser (the one that not only announces itself, but also serves as such)? having a Master Browser integrated in "always-on" router would really improve the predictability of the network.
2) If not, is there any way to disable the Master Browser on EA4500? For now I managed to achieve that by assigning the router to different workgroup name, but this is lame, as I now can't connect a disk storage to the router and use it within the same workgroup.
I have a wrt54G v8 wireless router and I was trying to install a firmware update a while ago and got impatient, stopped the upgrade in the middle of it and I think I may have bricked my router. I've since tried the 30/30/30 reset a number of times and have noticed that I don't get a blinking power light which I guess means it's ok.
Now when I go to 192.168.1.1 and log in, I can see most menus but when I click the firmware update menu (there's another screen that's also all white, I forget which one), it's all white (or blank). I've searched for a solution on the web and no luck so far.
I've been trying to do this on a mac and no luck. I then booted into windows 7 and used IE 9 to log into 192.168.1.1 and still the same thing, the firmware update screen is blank.
I'm able to use the web interface to the router, from one computer (Windows XP, IE 8). But from my other computer (also Windows XP, IE 8) I can log in to the router, but then the browser just presents an empty screen. I haven't been able to discover any setting in the browser that could cause this. From this same computer, I can access the web interface with no problem, using Google Chrome browser! So the problem seems to be in IE.
View 3 Replies View RelatedI am trying to integrate Cisco ACS 5.2 in a network to do device authentication of switches for administrators.
I am not sure if Cisco ACS 5.2 support RADIUS protocol to do device authentication. In the configuration of the Cisco ACS 5.2 I can only see TACACS authentication for device authentication and I have configured it and it works. If CISCO ACS 5.2 supports RADIUS auth for device authentication?
Not too much networking savvy - but here goes. Want to use router as local lan - no wireless. When router is connected to laptop via RJ45 I loose my ability to connect to sites via browser. IPconfig shows wireless adapter at 192.168.1.3. When router is attached it's ip is 192.168.1.1. Disabled the wireless in the settings but no dice. When the router was used with DSL it was set at PPPoE but now that I'm just using it locally not sure whether it should be DHCP or Static or other.
View 3 Replies View Related