I am able to access the console port via USB to console but i cant type anything in the terminal, i can select echo locally but doesnt rly do anything, i cant submit it. i cant seem to do anything in the actual terminal.
View 4 RepliesI have a Cisco ASA 5505. This has been previously configured. I am trying to give it a factory reset and I am being able to connect via Putty and Hyper-terminal but I cannot enter anything. I am able to go into ROMMAN mode by using the esc key.
View 6 Replies View RelatedI have some LSA type 5, I want to change it from type 5 to type 3 before send to another Area, How can i do it?
View 1 Replies View RelatedI have got an N Computing L230 Acces terminal whic i have no idea how it works actually i dont really know how. My problem is that Can it be used through a second ethernet board? On every site i found says i need a x300 pci card which i dont know what it is. Can someone explain that can i use instead of pci card a simple ethernet card ?
View 1 Replies View Relatedwhat is terminal and workstation in networking? I assume they mean client computers.
View 2 Replies View Relatedtrying to configure 2 cisco routers (3620 and 2501) Im using a RJ45 to DB9 cable and trying to see it in Tera Term. Nothing shows up in the terminal, and i cant even enter any imput. Ive tried hot-plugging into it, tried powering it up after making the connection, 3 different cables, 2 different computers (2 coms apiece-tried both) and every possible baud speed including the recommended 9600. (with no parity or flow control) the lights on the routers all come on and from what ive read they are not blinking out an error code. Ive also tried plugging the RJ45 into the AUX instead of CON and still, no cigar. BTW- running WinXP on Pentium4 2.53Ghz and 1G of RAM.
View 3 Replies View RelatedI have rolled out Terminal Services on Server 2008 R2 for a company I used to work for, it worked perfect the users could go home and browse to our web domain and login and use apps straight from the server.there'd be no Microsoft stuff to be accessed just pure Linux Servers but probarbly if users access the online terminal services on Linux they'd be using a Windows PC
View 1 Replies View RelatedI've got a decent setup (Vista, 6GB RAM) that I use for web browsing, browser games, and the occasional MMO. My wife has something that works for her for browsing / browser games (Win7, 2GB RAM). Naturally, the kids are always on my machine, and whoever comes second is fine with Mom's. BUT, sometimes that ol' butthead Daddy wants to use his own computer! No problem - Junior got a netbook for Christmas. OH, but... it's not what he's used to... actually, it's slow enough in comparison (Win7, 1G RAM) that he gets frustrated and wanders off[CODE]
View 5 Replies View RelatedI have a ONT with a built in router but I need to install a separate router onto our network by connecting the router to the ONT. I need the extra router so that I could use some 3rd party hardware which can only be configured in D-link and Tp-link brand routers. I do not want to change the ONT system to the standard modem router system because the ONT also supports a system of internet phones. I'm curious if this is possible at all because a repair tech. told me that you could use the router as a transformer but so far it is not working. I'm really unfaimilar with the ONT configuration so I don't know if this plan can actually work . So far the router can not recieve a WAN connection and therefore can not obtain a Ip address.
View 2 Replies View RelatedIm having some printing issues whenever im working on the terminal server. If I try to print a document out in "landscape", it will print out "portrait", seen though it displays properly in landscape in the print preview. If Im working locally on my PC, it prints out fine.
View 2 Replies View RelatedPC-1 connect to printer as local printer but shared for other PC.
PC-2 through TS can see the shared printer. This is OK. But when the printer move and connect to PC-3.
PC-3 connect to the server through TS and want to have print out some document from the server to the printer. But unfortunately the Printer cannot be seen through TS. Even the printer already shared.
making EEM work to show first xx lines of CPU utilization. I found when I put cli command "terminal length 13", the EEM stopped working and timed out after 20 seconds. I have tried IOS 12.4(25d) and 12.2(53) with same results. [code]
View 9 Replies View RelatedWhat command sequence disconnects you from a TS session? My setup is as followsr1 > TS > 2009-2621XM 2010-3825-R1 2011-3825-R2I can connect from the TS to any of the devices. The issue is that I am telnet'd to r1 and from there telnet'd to the TS. So when I type "Crtl+Shft+6, x" I go directly back to r1 and not the TS. Furthermore if I resume the session on r1 the TS is still connected to whatever session I was in prior to disconnecting. I've experimented with the disconnect and escape characters but I'm at a loss what it is that changes this.
View 4 Replies View RelatedWhat terminal/console server hardware platforms are you using and what do you prefer? I prefer Cisco terminal servers because of the ease and standard use of it.For a new project layout, I was given a opengear IMX4216. The terminal console is web based and I just dont like it(certain key-strokes not going through, terminal window size, etc).The project already has a separate PDU for remote power management, therefore this is simply being used as a remote serial console server.If I had to purchase the device for a similar purpose, I would not mind it, I guess. But to run it in prod, I'm not very fond of it!
View 18 Replies View RelatedI just added an HWIC-16A to a Cisco 2911 router for use as a Terminal Server.[URL]I've installed and configured the card properly. However, I receive the following error message:Attempt from Cisco CLI
View 2 Replies View Relatedi would like to know if its possible to connect a wireless router to GPON terminal
View 2 Replies View RelatedWe have the 16-port (NM-16A) and 32-port (NM-32A) asynchronous (async) network modules which provides 16 or 32 EIA/TIA-232 (formerly know as RS-232) data terminal equipment (DTE) serial interfaces at speeds up to 134.4 kbps . Few of the interfaces are connected to the console of cisco switches and routers , now we need to know that the remaining interfaces can be connected to console ports of devices other then cisco Systems to manage them , Will it work with them ?
View 0 Replies View RelatedSince Cisco 2511 is out of sale now and Cisco 1900 series are recommended to replace for the purpose of terminal/comm server. How to configure terminal server on HWIC-8A module?
View 3 Replies View Relatedhow to configure log in Cisco 1841 router, terminal log
View 1 Replies View RelatedI want to build up cisco 3800 series router as terminal server , i have Asycs 32A module in cisco 3825. Here is show version of device.Do i need to installed any specific IOS in Cisco 3825 device ? how to configure cisco 3825 as terminal server.
View 1 Replies View RelatedI am running ASA 5505 release 8.2(4) using a clientless SSL vpn to connect my assessors to the server via RDP to a Terminal server. Everything was working fine until last week when we had a Internet outage. During the outage some of the assessors claimed to have accepted a Cisco add-on to get into the site. once the internet came backup they could not connect to the terminal servers - what would happen is they would click on the link - say OK to connect the clipboard and the screen would pause for a few seconds then right back to the select options page.
they can get to other servers (non-terminal servers) but not to the ones they need. I can recreate the issue by waiting a REALLY long time before replying to a prompt to install an cisco add-on. I have users that can connect and others than can not. Also this only seems to affect Internet Explorer 8 and 9 does not affect Firefox
I have just purchased 2901 with HWIC-16A and 2 CAB-HD8-ASYNC Terminal Server to manage 16 (connect via console) cisco deivces.
Plese find attached the config file. I could not find proper docs on setting up this device as a terminal server. I have followed the following link but did not work.
[URL]
There are 16 Async (0/0/0 - 15) interfaces and also the following lines.
line 2line 0/0/0 0/0/1line 0/0/2 0/0/15
How can I connect to other Cisco devices via the terminal router?
usage of above 16 Async interfaces and lines.
I don't get whats the problem but when i try to run the following command :
sudo apt-get update
I was getting an output of sort...
0% [Connecting to us.archive.ubuntu.com (91.189.91.13)] [Connecting to security.ubuntu.com (91.189.92.184)]
0% [Connecting to us.archive.ubuntu.com (91.189.91.13)] [Connecting to
[Code]....
And our institute uses a proxy server... when i try to ping that server it was pinging these servers but not the external servers...like security.ubuntu.com or some other site... I can access internet from my browser, but the software center is unable to download anything.
I've heard that you can configure an 1811 router as a terminal server for remote console work.I have several of them in the lab and would love to try it out.
View 2 Replies View RelatedWhen you type a command in the terminal, if the command is too long is only displays the last half of it. How do I change it show it give me enough room to view the entrie command?
View 3 Replies View RelatedI have a cisco 2600 router with 4A/S module, can it become the terminal server? If yes, which kind of octal cable should I choose to connect to other cisco routers console ports?
View 0 Replies View RelatedWe currently have 8 1242's and they all work fine, however we recently baught one 2nd hand one which was previously connected to a WLC, it lights up fine but it wont detect in IPSU even though the dhcp has assigned an IP to it. I would like to login through the web page to configure it but I am not able to do that either. It responds to ping fine though. So I no longer wont it be a LAP, so I tried to console in, to run flash_init etc. but when I try and give the <ESC> command (during the flash loader) it just carries on and ignores all input. I have used the correct settings Baud rate 9600, no parity, no flow control , databits 8, etc. but nothing happens it just goes through the boot and then asks me to press enter to input. i can then browse the directories and rename files. but I just cant get it to holt the loader so I can reset, I tried rename of config.txt and env_vars but that has't worked either. It keeps stating that it is looking for LWAPP/CAPWAP but unfortunately we don't have a WLC Is there another way I can reset it or is there some magic way in whic I can send the ESC command.
View 4 Replies View RelatedUsing EMM as a nice friendly interface for their terminal server (ie router with NM-16A and octal cables)?when I ask the framework to run the following command it gets stuck will a blinking cursor and clear screen
<IOSExecCommand>"connect 10.1.1.1 2000"</IOSExecCommand>
however removing the port number allows it to connect fine.
<IOSExecCommand>"connect 10.1.1.1"</IOSExecCommand>
same symptom if iI were to replace connect with telnet
<IOSExecCommand>"telnet 10.1.1.1 2000"</IOSExecCommand>
even setting up an iphost does the same ie:
ip host R1 2000 10.1.1.1
<IOSExecCommand>"connect R1"</IOSExecCommand>
All of these commands work fine from the # prompt
i trying to set up a terminal server, 2811 with an HWIC-16A und two octo cables. [code] connect and sometimes not. It seems the connection is established but i don't get a prompt von the target device.The target devices are cisco 2811 and cisco catalysts 3560.
View 1 Replies View RelatedI've a RV082 with 2 internet connections.The idea is to permit external connections to my server and if one Internet line falls, automatically switch to the other.
We have configured the router in Smart Link backup.We try to connect with WAN1 and WAN2 enabled and all works fine.
We try to connect with WAN1 disabled and automatically WAN2 is activated.The problem start here...if WAN1 is activated while there are connections using WAN2, these connections falls!
How I must configure the router to permit that active connections are not disconnected from WAN2 even when WAN1 connection come back?
I have a Cisco 2901 Terminal server with AAA authentication via ACS server. I create twoaccounts on the acs server, cciesec2011 and vendor. Both accounts can log into the Cisco 2901 Terminal Server without any issues. By the way, I am NOT using AAA authorization on the Cisco Terminal Server. Once cciesec2011 or vendor accounts are authenticated, theseaccounts can access all the async line on the Cisco Terminal Server.
Now I have a new requirements. I would like to allow cciesec2011, once this account is successfully authenticated, this account has access to ALL async line on the Terminal Server. The "vendor" account, I want to restrict this account access only to async line 35 (there are 32 async lines available on the Cisco Terminal Server) and nothing else.
How can I accomplish without using AAA authorization on the Cisco Terminal Server?Is it possible to use "privlege level" to accomplish this? if so, how?
I am having two issues:
1. my email going out is working along with internal, but inbound email is not working. My barracuda email filter is 192.168.1.107 and my exchange 2007 is 192.168.1.222 along with this OWA does not work.
2. Terminal Services does not work when I try from the home pc in I get server not available or disconnected
Below is my congig
ASA Version 8.3(1)!hostname wsigatewaydomain-name wsystems.comenable password yVSkMxWRc/S396FB encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Ethernet0/0 nameif outside security-level 0 ip address 64.XXX.XXX.XXX 255.XXX.XXX.XXXinterface Ethernet0/1 nameif inside security-level 100 ip address 192.168.1.1 255.255.0.0!interface Ethernet0/2 shutdown no nameif no security-level no ip address!interface Ethernet0/3 [Code]....
Any example of router config for a terminal server.In fact I need a configuration for a router with multiple, low speed, asynchronous ports that are connected to other serial devices, for example,modems or console ports on routers or switches.With this router I would like to use a reverse telnet to connect with my devices using the serial connection.I find many examples on the Cisco web site but none with my router hardware configuration.My router is a 3620 router with a 8 port async (NM-8A/S) network module and I would like to use the 8 serial interfaces, each of them connecting a serial device.
Here is the show run and show ver :Router#show ver Cisco Internet work Operating System Software IOS (tm) 3600 Software (C3620-I-M), Version 12.3(25), RELEASE SOFTWARE (fc1)Copyright (c) 1986-2008 by Cisco Systems, Inc.Compiled Mon 28-Jan-08 20:16 by alnguyen
ROM: System Bootstrap, Version 11.1(19)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Router up time is 1 minute System returned to ROM by reload System image file is "flash:c3620-i-mz.123-25.bin"
[Code]...