Cisco :: Which Terminal Servers Hardware Platforms Are Used
Jan 10, 2013
What terminal/console server hardware platforms are you using and what do you prefer? I prefer Cisco terminal servers because of the ease and standard use of it.For a new project layout, I was given a opengear IMX4216. The terminal console is web based and I just dont like it(certain key-strokes not going through, terminal window size, etc).The project already has a separate PDU for remote power management, therefore this is simply being used as a remote serial console server.If I had to purchase the device for a similar purpose, I would not mind it, I guess. But to run it in prod, I'm not very fond of it!
View 18 Replies
ADVERTISEMENT
Jun 3, 2013
I manage Wi-Fi on a college campus, and we have implemented 802.1x with RADIUS authentication running on a Windows server, and that works well. The issue is that the college is looking at removing wired connections in the dorms in favor of just deploying wireless, and the gaming consoles (Xbox, PS3, etc. ) cannot support 802.1x. We use Cisco 5508 Wireless LAN controllers with 1142 and 3602 APs.
I would like to enable MAC address authentication for these gaming consoles, wherein we (IT) would enter the MAC address of the console for a single connection and allow that console to connect to Wi-Fi, but I do not want to use WEP or any other TKIP passwords, because once the students would know the password they would use WEP/WPA instead of authenticating through RADIUS for their PC/tablet connections. .
View 2 Replies
View Related
Dec 11, 2012
where I can get a list of show command for individual platforms?
For example a list of show commands for cisco GSR 12000?
View 2 Replies
View Related
Jan 31, 2013
Running ASA ver 8.6(1)5.Question is do I need a license to run anyconnect from our Android platforms?
Currently have the following licenses installed Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 500 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
[code]....
View 1 Replies
View Related
Jun 12, 2012
I would like to define a general policy for our company to set the log buffer ("logging buffered xxx"). Currently, most of our configs use the default value of 4096, which does not store much of the history. I'd like to see more, when logged onto a router. We are using different router platforms (from old 1700 up to 39xx oder 72xx) Can you give me any hints, how large the buffer can be set on a platform? Which checks should I do to determine, how large I can set the buffer?
Here's an example of a Cisco 1720 router:
Cisco1720#sh mem
Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)
Processor 81AECE9C 17803244 5548816 12254428 12010916 11815908
I/O 2B43000 4968448 1560416 3408032 3374144 3396668
Cisco says: "Total = the total amount of memory available after the system image loads and builds its data structures."So, in this example, the total bytes are 17803244, which is ~ 16.9 Mbyte. So, if I allocate 64000 bytes, my total buffer will decrease to ~16,3 Mbyte.
I my calculation above is correct, I see no problem in defining a standard value of "logging buffered 64000" for every router platform - even under high load conditions. Since 64 kbytes is a very small value compared to the total usable memory of a Cisco 1720, newer platforms should not have any problems either.
View 2 Replies
View Related
Nov 30, 2012
I have a mac and an android connected to a wireless network and can not open outlook express on both at the same time. Is that just the way it is.
View 2 Replies
View Related
Apr 24, 2013
We are looking to replace some aging 3560 switches with 100Mb/s interfaces. They service IP phones and workstations.
For having IP phones directly connected to access switches that are also servicing workstations, we don't need L3 routing except in the core, so the question is what would we lose if we used 2960S switches for access switches.
I understand from having spoken with Cisco TAC that a limited subset of QoS is available on the 2960S platform. Does that includes the priority queue that is enabled when you turn on mls qos on a L3 switch?
View 1 Replies
View Related
Jul 26, 2011
Yesterday Cisco released IOS 15 code into the wild for the 2960 and 3560/3750 families but the link to the release notes is not working. Because I already have a whole bunch of 4500/Sup7's running IOS 15 I am thinking about taking the plunge with 30 3750-X's I have on order but want to review the release notes first. where they might be hiding?
View 4 Replies
View Related
Feb 8, 2012
I'm looking at implementing a new DMZ and wanted Netflow capability for security monitoring.The architectural principles I have to adhere to dictate that the switches within the DMZ are layer 2 however to get Netflow I need a minimum of a 3560/3750X, Network Services module, IP Base IOS with ip routing and CEF enabled.To do this and still keep the switch functioning as a layer 2 device the intention was not to configure SVI's or any static/dynamic routing protocols.Will Netflow still work in that scenario?
View 4 Replies
View Related
Apr 4, 2012
I have an HP OfficeJet J4500 that works fine with shareport on my Win7 x64 computer. the XP and Win2000 ones both have the same "partial page then lockup" problem. when this happens, the only way to disconnect shareport is to reboot the router. It shows connected to the same computer even if I reboot that computer. I started with V1?? from the install disk then tried 3 and finally 4 with no improvement. I have read several posts about this or similar problems. This is the primary reason I switched routers and bought the D-Link DIR-655, for the print server feature...
View 3 Replies
View Related
Jun 11, 2013
We are planning to split the Private servers from the DMZ Servers and configure an additional Interface and segment for this purpose.
Private Servers Segment: 192.168.4.0/24 (there is no DHCP all servers' IPs are statically configured)
DMZ Segment: 192.168.3.0/24 (This is a future deployment)
LAN Segment: 172.17.0.0/16
Both, Private Servers and DMZ Servers are in a collocation as well as the ASA5520. There are multiple Branch offices that uses subnets within the 172.17.0.0/16 Network and they are connected to the ASA5520 via Metro-E.
I do not know if this is possible but what I want to do is this:
In order to avoid the change of internal DNS records I want to mask the DMZ servers with a Private Server IP when a Private server or LAN host wants to access it like this:
The FTP server in the DMZ has the IP address: 192.168.3.100. But when a PC from the LAN wants to reach the FTP server it should points to its old IP: 192.168.4.100. This way the PC sends a packet to the ftp.corporate.net (192.168.4.100) the ASA recieves the packet and translate it to the (192.168.3.100) and send it out through the DMZ Interface.
Also if the Private Servers wants to reach the same FTP the ASA will act like a proxy-ARP and send the paquet to the DMZ by means of the translation of the IP.
View 6 Replies
View Related
Mar 20, 2012
I Have exented vlan 120,121 from DC-1 to DC-2,the DC-1 and DC-2 are connected using L2 Trunk over fiber terminated on Cisco 6513 on both site ,the distance around 40 Km ,on the DC-2 i just assigned server-1 TO VLAN 120 while server-2 in vlan 121 ,but these servers unable to communicate neither with DC-1 Servers or betwen them locally on DC-2 ,pls note that the servers at dc-2 rely on DC-1 for routing.
View 7 Replies
View Related
Jul 1, 2011
trying to configure 2 cisco routers (3620 and 2501) Im using a RJ45 to DB9 cable and trying to see it in Tera Term. Nothing shows up in the terminal, and i cant even enter any imput. Ive tried hot-plugging into it, tried powering it up after making the connection, 3 different cables, 2 different computers (2 coms apiece-tried both) and every possible baud speed including the recommended 9600. (with no parity or flow control) the lights on the routers all come on and from what ive read they are not blinking out an error code. Ive also tried plugging the RJ45 into the AUX instead of CON and still, no cigar. BTW- running WinXP on Pentium4 2.53Ghz and 1G of RAM.
View 3 Replies
View Related
Feb 26, 2011
I have got an N Computing L230 Acces terminal whic i have no idea how it works actually i dont really know how. My problem is that Can it be used through a second ethernet board? On every site i found says i need a x300 pci card which i dont know what it is. Can someone explain that can i use instead of pci card a simple ethernet card ?
View 1 Replies
View Related
Jun 3, 2012
I am able to access the console port via USB to console but i cant type anything in the terminal, i can select echo locally but doesnt rly do anything, i cant submit it. i cant seem to do anything in the actual terminal.
View 4 Replies
View Related
Aug 17, 2011
making EEM work to show first xx lines of CPU utilization. I found when I put cli command "terminal length 13", the EEM stopped working and timed out after 20 seconds. I have tried IOS 12.4(25d) and 12.2(53) with same results. [code]
View 9 Replies
View Related
Apr 16, 2011
i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
View 16 Replies
View Related
Feb 11, 2011
what is terminal and workstation in networking? I assume they mean client computers.
View 2 Replies
View Related
Jun 2, 2012
What command sequence disconnects you from a TS session? My setup is as followsr1 > TS > 2009-2621XM 2010-3825-R1 2011-3825-R2I can connect from the TS to any of the devices. The issue is that I am telnet'd to r1 and from there telnet'd to the TS. So when I type "Crtl+Shft+6, x" I go directly back to r1 and not the TS. Furthermore if I resume the session on r1 the TS is still connected to whatever session I was in prior to disconnecting. I've experimented with the disconnect and escape characters but I'm at a loss what it is that changes this.
View 4 Replies
View Related
Mar 26, 2013
I just added an HWIC-16A to a Cisco 2911 router for use as a Terminal Server.[URL]I've installed and configured the card properly. However, I receive the following error message:Attempt from Cisco CLI
View 2 Replies
View Related
Jul 24, 2012
We have the 16-port (NM-16A) and 32-port (NM-32A) asynchronous (async) network modules which provides 16 or 32 EIA/TIA-232 (formerly know as RS-232) data terminal equipment (DTE) serial interfaces at speeds up to 134.4 kbps . Few of the interfaces are connected to the console of cisco switches and routers , now we need to know that the remaining interfaces can be connected to console ports of devices other then cisco Systems to manage them , Will it work with them ?
View 0 Replies
View Related
May 18, 2011
Since Cisco 2511 is out of sale now and Cisco 1900 series are recommended to replace for the purpose of terminal/comm server. How to configure terminal server on HWIC-8A module?
View 3 Replies
View Related
Dec 19, 2012
how to configure log in Cisco 1841 router, terminal log
View 1 Replies
View Related
Apr 19, 2012
I want to build up cisco 3800 series router as terminal server , i have Asycs 32A module in cisco 3825. Here is show version of device.Do i need to installed any specific IOS in Cisco 3825 device ? how to configure cisco 3825 as terminal server.
View 1 Replies
View Related
May 2, 2012
I am running ASA 5505 release 8.2(4) using a clientless SSL vpn to connect my assessors to the server via RDP to a Terminal server. Everything was working fine until last week when we had a Internet outage. During the outage some of the assessors claimed to have accepted a Cisco add-on to get into the site. once the internet came backup they could not connect to the terminal servers - what would happen is they would click on the link - say OK to connect the clipboard and the screen would pause for a few seconds then right back to the select options page.
they can get to other servers (non-terminal servers) but not to the ones they need. I can recreate the issue by waiting a REALLY long time before replying to a prompt to install an cisco add-on. I have users that can connect and others than can not. Also this only seems to affect Internet Explorer 8 and 9 does not affect Firefox
View 1 Replies
View Related
May 12, 2012
I have just purchased 2901 with HWIC-16A and 2 CAB-HD8-ASYNC Terminal Server to manage 16 (connect via console) cisco deivces.
Plese find attached the config file. I could not find proper docs on setting up this device as a terminal server. I have followed the following link but did not work.
[URL]
There are 16 Async (0/0/0 - 15) interfaces and also the following lines.
line 2line 0/0/0 0/0/1line 0/0/2 0/0/15
How can I connect to other Cisco devices via the terminal router?
usage of above 16 Async interfaces and lines.
View 4 Replies
View Related
May 15, 2012
I've heard that you can configure an 1811 router as a terminal server for remote console work.I have several of them in the lab and would love to try it out.
View 2 Replies
View Related
May 26, 2011
I have rolled out Terminal Services on Server 2008 R2 for a company I used to work for, it worked perfect the users could go home and browse to our web domain and login and use apps straight from the server.there'd be no Microsoft stuff to be accessed just pure Linux Servers but probarbly if users access the online terminal services on Linux they'd be using a Windows PC
View 1 Replies
View Related
Sep 1, 2012
I've got a decent setup (Vista, 6GB RAM) that I use for web browsing, browser games, and the occasional MMO. My wife has something that works for her for browsing / browser games (Win7, 2GB RAM). Naturally, the kids are always on my machine, and whoever comes second is fine with Mom's. BUT, sometimes that ol' butthead Daddy wants to use his own computer! No problem - Junior got a netbook for Christmas. OH, but... it's not what he's used to... actually, it's slow enough in comparison (Win7, 1G RAM) that he gets frustrated and wanders off[CODE]
View 5 Replies
View Related
Aug 13, 2012
I have a ONT with a built in router but I need to install a separate router onto our network by connecting the router to the ONT. I need the extra router so that I could use some 3rd party hardware which can only be configured in D-link and Tp-link brand routers. I do not want to change the ONT system to the standard modem router system because the ONT also supports a system of internet phones. I'm curious if this is possible at all because a repair tech. told me that you could use the router as a transformer but so far it is not working. I'm really unfaimilar with the ONT configuration so I don't know if this plan can actually work . So far the router can not recieve a WAN connection and therefore can not obtain a Ip address.
View 2 Replies
View Related
May 11, 2011
Im having some printing issues whenever im working on the terminal server. If I try to print a document out in "landscape", it will print out "portrait", seen though it displays properly in landscape in the print preview. If Im working locally on my PC, it prints out fine.
View 2 Replies
View Related
Jan 28, 2011
PC-1 connect to printer as local printer but shared for other PC.
PC-2 through TS can see the shared printer. This is OK. But when the printer move and connect to PC-3.
PC-3 connect to the server through TS and want to have print out some document from the server to the printer. But unfortunately the Printer cannot be seen through TS. Even the printer already shared.
View 3 Replies
View Related
Jan 9, 2013
When you type a command in the terminal, if the command is too long is only displays the last half of it. How do I change it show it give me enough room to view the entrie command?
View 3 Replies
View Related
