Cisco WAN :: How To Configure Terminal Log In 1841 Router
Dec 19, 2012how to configure log in Cisco 1841 router, terminal log
View 1 Replies
ADVERTISEMENT
Cisco WAN :: How To Configure 3825 As Terminal Server
Apr 19, 2012I want to build up cisco 3800 series router as terminal server , i have Asycs 32A module in cisco 3825. Here is show version of device.Do i need to installed any specific IOS in Cisco 3825 device ? how to configure cisco 3825 as terminal server.
View 1 Replies View RelatedCisco :: Configure 1811 As Terminal Server
May 15, 2012I've heard that you can configure an 1811 router as a terminal server for remote console work.I have several of them in the lab and would love to try it out.
View 2 Replies View RelatedCisco :: Create Profile That Will Allow Show Running Config But Not Configure Terminal
Oct 10, 2011In our company we use the ACS 5.and i have a small problem, what we need to do is.create a profile that will allow SHOW RUNNING CONFIG but not configure terminal.i am investigating and im a littel bit lost i have created a new group but i dont see any option to put permissions.
View 1 Replies View RelatedCisco VPN :: How To Configure On Router 1841
Dec 24, 2012setup a vpn server cisco.
device cisco router 1841 [URL]
Cisco :: Configure 1841 Router And Firewall?
Feb 11, 2013Configuring Cisco 1841 router and firewall.My provider has put their equipment and given me 2 subnets with public ip address. I am used to getting just one Subnet and connecting my firewall straight to the hand off. But in this case I am a bit confused. I assume I will need to put a router and configure it with before I connect my firewall. [code] I also have a firewall that I would like to be on the subnet 2 at 200.xxx.97.130 and have my private network 192.168.xxx.xxx behind it.
View 2 Replies View RelatedCisco WAN :: 1841 - Configure VPN For Failover On Router?
Apr 2, 2011how to configure VPN connection with failover on cisco Router 1841?
View 5 Replies View RelatedCisco WAN :: Configure QoS In Router 1841 For Port (500 / 4500)
May 29, 2013how can I configure QoS in the router CISCO1841 for the port IPSEC(UDP 500 ,UDP 4500) and the port tcp 4433
View 5 Replies View RelatedCisco WAN :: Can't Configure VWIC-2MFT-T1 On 1841
Jan 13, 2013I have checked and re-checked before buying and this card is evidently supported on the 1841 for 'data mode only' which is all I need. I have 3 T1s in Multilink mode and I want to use 2 of these cards (and 3 of the 4 ports) to support it. The problem is that even though SH INVENTORY finds the card, I can't issue the "card type" command to indicate I am using it with a T1 - I get this:
R3(config)#card type t1 1 0
^
% Invalid input detected at '^' marker.
So I tried to issue the "controller T1" command and it does not recognize the slot as containing a T1 card (which makes sense since the "card" command did not work).
I found numerous references to this card being supported in Cisco docs with a minimum OS around 12.2(8) - it varies based on the chassis. I can't find the explicit OS required for the 1841 which is a concern but I am using 12.4(13r)T. SH VERSION finds "2 Channelized T1/PRI ports" which is the MFT card.
I need to get Serial interfaces configured on these cards.
Cisco WAN :: 1841 Configure NAT For LAN User Can Go To Internet
Aug 4, 2011As per topology attached herewith, i have 2 ISPs, ISP1 and ISP2. And i have one Cisco 1841 Router with only 2 Ethernet interfaces.My Lan subnet is 192.168.1.0.My puspose is, i want to configure both ISP1 and ISP2 and my Lan Network on router, without adding any extra interaface. I also want to configure a nat so that Lan user can go to internet. I wabt to do this using 2 Interfaces.
View 17 Replies View RelatedCisco WAN :: Minimum Parameters To Configure T1 Between Two 1841?
Oct 16, 2011I configure two WIC-1DSU-T1-v2 interfaces with a T1 crossover cable. What are the mimimum configurations to do to communicate from LAN1 (int fa0/0 of one 1841 router) to LAN2 (int fa0/0 of the second 1841 router) ?
Do I need a routage protocole ? And if yes wich one ? Interne or externe (RIP or BGP) Or static route is enough ? Also, is that I should put a encapsulation, like ppp ? Is it neccessary on a point to point line ?
Finally what about the following commands, do I need it ?
service-module t1 clock source internal
service-module t1 timeslots 1-24 speed 64
service-module t1 framing esf
service-module t1 linecode b8zs
Cisco WAN :: 1841 - Cannot Access Configure Menu
Sep 11, 2011I can not access the configure menu.
I try access with Serial cable blue DB09 / RJ45 on console port and serial ports on PC using putty or hyperterminal but any connection can not be done. The screen stay black and not show any text.
The computer found the port COM1 but i csn not access any information from Cisco router model 1841
Cisco LAN :: 1841 - Configure Dynamic / Static Nat With Route-Maps
Aug 4, 2009Basically I have an internet router (1841ISR) with 1 internal (LAN) connection and 2 internet connections. What I want to do is route specific traffic for 3 of my internally hosted services (smtp, https, etc) through one internet connection (fa0/0) and then route all other traffic through the unmanaged/dynamic IP ADSL connection (Dialer 0).
View 9 Replies View RelatedCisco Router(s) Cannot Be Seen In Terminal
Jul 1, 2011trying to configure 2 cisco routers (3620 and 2501) Im using a RJ45 to DB9 cable and trying to see it in Tera Term. Nothing shows up in the terminal, and i cant even enter any imput. Ive tried hot-plugging into it, tried powering it up after making the connection, 3 different cables, 2 different computers (2 coms apiece-tried both) and every possible baud speed including the recommended 9600. (with no parity or flow control) the lights on the routers all come on and from what ive read they are not blinking out an error code. Ive also tried plugging the RJ45 into the AUX instead of CON and still, no cigar. BTW- running WinXP on Pentium4 2.53Ghz and 1G of RAM.
View 3 Replies View RelatedCisco Switching/Routing :: Configure 2940 Switch To Work With 1841?
Mar 5, 2012I have a Cisco 2940 switch and a Cisco 1841 router. I want to build two different VLAN networks on the switch, which do not have to communicate one with each other, but those VLANS should communicate with the router.
I read a lot of articles, i tried to configure properly the switch and the router but i still don't get them work.
I set on the switch, the GigabitEthernet 0/1 port to Trunk port and i had to set it a native VLAN. The problem is that only from that native VLAN, i can ping the router.
Cisco VPN :: ASA 5510 / 1841 - How To Configure Local Network To Access Internet
Jun 10, 2011I configure for our office site to site VPN project. Now I configured already Site to site vpn between ASA 5510 and 1841 router.
HQ LAN
Branch LAN 10.2.1.0/24 >>> ASA 5510>>>>> 1841 >>> INTERNET <<<<<< 1841 <<<<<< 10.30.3.0/24 ^^^^ Call Manager 2851
Now can access from Branch LAN to HQ LAN each other. I face the problems that are
1) In branch LAN , they can access HQ LAN & resource , but cannot access internet. I didn't configure NAT on PH Router
2) Can I access internet from BRANCH LAN through HQ LAN to INTERNET. Or Can I access Internet from Branch LAN from PH Router directly while access to VPN to HQ LAN ?
3) In Branch Site , hard phone cannot work but soft phone on PC can call to HQ. Hard phone IP are same in Remote Network (172.16.1.0/24 ) . Is it problem ? how can I configure separately ?
Need To Add A Router To Optical Network Terminal (ONT)
Aug 13, 2012I have a ONT with a built in router but I need to install a separate router onto our network by connecting the router to the ONT. I need the extra router so that I could use some 3rd party hardware which can only be configured in D-link and Tp-link brand routers. I do not want to change the ONT system to the standard modem router system because the ONT also supports a system of internet phones. I'm curious if this is possible at all because a repair tech. told me that you could use the router as a transformer but so far it is not working. I'm really unfaimilar with the ONT configuration so I don't know if this plan can actually work . So far the router can not recieve a WAN connection and therefore can not obtain a Ip address.
View 2 Replies View RelatedCisco :: 2600 Router With 4A/S Module Can Be Terminal Server
Jul 11, 2011I have a cisco 2600 router with 4A/S module, can it become the terminal server? If yes, which kind of octal cable should I choose to connect to other cisco routers console ports?
View 0 Replies View RelatedCisco WAN :: 3620 - Router Configuration For Terminal Server
Feb 1, 2011Any example of router config for a terminal server.In fact I need a configuration for a router with multiple, low speed, asynchronous ports that are connected to other serial devices, for example,modems or console ports on routers or switches.With this router I would like to use a reverse telnet to connect with my devices using the serial connection.I find many examples on the Cisco web site but none with my router hardware configuration.My router is a 3620 router with a 8 port async (NM-8A/S) network module and I would like to use the 8 serial interfaces, each of them connecting a serial device.
Here is the show run and show ver :Router#show ver Cisco Internet work Operating System Software IOS (tm) 3600 Software (C3620-I-M), Version 12.3(25), RELEASE SOFTWARE (fc1)Copyright (c) 1986-2008 by Cisco Systems, Inc.Compiled Mon 28-Jan-08 20:16 by alnguyen
ROM: System Bootstrap, Version 11.1(19)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Router up time is 1 minute System returned to ROM by reload System image file is "flash:c3620-i-mz.123-25.bin"
[Code]...
Connecting A Wireless Router To GPON Terminal?
Feb 25, 2013i would like to know if its possible to connect a wireless router to GPON terminal
View 2 Replies View RelatedCisco WAN :: 2911 Router Not Loading Putty And Hyper Terminal
Jan 3, 2013I have cisco 2911 router, this router not load putty and hyper terminal. my last command is confreg 0x3242 from rommon mode.
View 1 Replies View RelatedCisco WAN :: 1841 WIC To Configure BRI Interface In Network Protocol Emulate Network
Apr 5, 2011I'm trying to configure my BRI interface in "network protocol-emulate network" and "layer1-emulate network" but i don't have this second command.Is someone have allready to that with this type of interface ?I've to configure this because the ISDN line of my telco is in user mode only.
View 5 Replies View RelatedHow To Use N Computing Terminal
Feb 26, 2011I have got an N Computing L230 Acces terminal whic i have no idea how it works actually i dont really know how. My problem is that Can it be used through a second ethernet board? On every site i found says i need a x300 pci card which i dont know what it is. Can someone explain that can i use instead of pci card a simple ethernet card ?
View 1 Replies View RelatedCan't Type Anything In Terminal
Jun 3, 2012I am able to access the console port via USB to console but i cant type anything in the terminal, i can select echo locally but doesnt rly do anything, i cant submit it. i cant seem to do anything in the actual terminal.
View 4 Replies View RelatedCisco :: EEM 12.2 Does Not Work With Terminal Length
Aug 17, 2011making EEM work to show first xx lines of CPU utilization. I found when I put cli command "terminal length 13", the EEM stopped working and timed out after 20 seconds. I have tried IOS 12.4(25d) and 12.2(53) with same results. [code]
View 9 Replies View RelatedWhat Is Terminal And Workstation In Networking
Feb 11, 2011what is terminal and workstation in networking? I assume they mean client computers.
View 2 Replies View RelatedCisco :: Terminal Server Disconnect From TS Session?
Jun 2, 2012What command sequence disconnects you from a TS session? My setup is as followsr1 > TS > 2009-2621XM 2010-3825-R1 2011-3825-R2I can connect from the TS to any of the devices. The issue is that I am telnet'd to r1 and from there telnet'd to the TS. So when I type "Crtl+Shft+6, x" I go directly back to r1 and not the TS. Furthermore if I resume the session on r1 the TS is still connected to whatever session I was in prior to disconnecting. I've experimented with the disconnect and escape characters but I'm at a loss what it is that changes this.
View 4 Replies View RelatedCisco :: Which Terminal Servers Hardware Platforms Are Used
Jan 10, 2013What terminal/console server hardware platforms are you using and what do you prefer? I prefer Cisco terminal servers because of the ease and standard use of it.For a new project layout, I was given a opengear IMX4216. The terminal console is web based and I just dont like it(certain key-strokes not going through, terminal window size, etc).The project already has a separate PDU for remote power management, therefore this is simply being used as a remote serial console server.If I had to purchase the device for a similar purpose, I would not mind it, I guess. But to run it in prod, I'm not very fond of it!
View 18 Replies View RelatedCisco :: Configuring HWIC-16A For Terminal Service?
Mar 26, 2013I just added an HWIC-16A to a Cisco 2911 router for use as a Terminal Server.[URL]I've installed and configured the card properly. However, I receive the following error message:Attempt from Cisco CLI
View 2 Replies View RelatedCisco :: TIA-232 Terminal Server With Async Ports
Jul 24, 2012We have the 16-port (NM-16A) and 32-port (NM-32A) asynchronous (async) network modules which provides 16 or 32 EIA/TIA-232 (formerly know as RS-232) data terminal equipment (DTE) serial interfaces at speeds up to 134.4 kbps . Few of the interfaces are connected to the console of cisco switches and routers , now we need to know that the remaining interfaces can be connected to console ports of devices other then cisco Systems to manage them , Will it work with them ?
View 0 Replies View RelatedCisco :: Configuration Of Terminal Server On 1921?
May 18, 2011Since Cisco 2511 is out of sale now and Cisco 1900 series are recommended to replace for the purpose of terminal/comm server. How to configure terminal server on HWIC-8A module?
View 3 Replies View RelatedCisco VPN :: 5505 - RDP To Terminal Server Failure
May 2, 2012I am running ASA 5505 release 8.2(4) using a clientless SSL vpn to connect my assessors to the server via RDP to a Terminal server. Everything was working fine until last week when we had a Internet outage. During the outage some of the assessors claimed to have accepted a Cisco add-on to get into the site. once the internet came backup they could not connect to the terminal servers - what would happen is they would click on the link - say OK to connect the clipboard and the screen would pause for a few seconds then right back to the select options page.
they can get to other servers (non-terminal servers) but not to the ones they need. I can recreate the issue by waiting a REALLY long time before replying to a prompt to install an cisco add-on. I have users that can connect and others than can not. Also this only seems to affect Internet Explorer 8 and 9 does not affect Firefox
Cisco :: 2901 Terminal Server Configuration
May 12, 2012I have just purchased 2901 with HWIC-16A and 2 CAB-HD8-ASYNC Terminal Server to manage 16 (connect via console) cisco deivces.
Plese find attached the config file. I could not find proper docs on setting up this device as a terminal server. I have followed the following link but did not work.
[URL]
There are 16 Async (0/0/0 - 15) interfaces and also the following lines.
line 2line 0/0/0 0/0/1line 0/0/2 0/0/15
How can I connect to other Cisco devices via the terminal router?
usage of above 16 Async interfaces and lines.