I'm currently using wifi on my desktop but I usually disconnect and use cable. But just recently I do not know when, I can't detect any internet even the cable is attached to the pc
i acces internet on my pc using tata photon+ mobile broadband service,my problem is that i bought a ps3 and want to share internet connection with pc using ethernet cable via lan modem, for this i connected ps3 and pc using ethernet cable,i go to custom and wired setting of ps3 but my ps3 keep saying 'connect ethernet cable'.
I recently moved into the dorms of my college and tried connecting my laptop to the internet using an ethernet cable. It worked, so I decided to try and play Xbox Live through the use of the ethernet cable and it did not work. After messing around with it and failing to get it to work for my Xbox 360, the ethernet decided to quit working for my computer as well. (To try and get my Xbox to connect to the internet with the ethernet cord, I tried network bridging by bridging the ethernet connection with the wireless connection, then unplugging the ethernet cable from the wall so as to connect it from my laptop to Xbox 360. This didn't work so I just deleted the bridge. This is when the problem started happening as the local connection stopped appearing.) I am able to plug it in and see that in the Network and Sharing Center, however, it shows up as being unplugged. After a couple seconds though, it disappears. If I click on it fast enough, it shows up with an Error Code 45 after looking at the properties. I have tried typing in ipconnfig /all and the ethernet connection doesn't show up there either.
I'm having an issue with my network adapter. It's not detecting the Ethernet cable, thus not able to connect to my home network. The trouble shooter (Windows 7 home 64) says it canning detect the cord. But the cable works fine on my other computer. The network adapter is a Nvdia nforce networking controller. All the drivers are up to date. The computer was completely formatted so it's a blank slate
Today when I came home from school, I opened my computer like everyday. Suddenly I noticed that my Internet isn't working. It said I need to connect the Ethernet Cable. Well, my cable sometimes gets loose, so I tried to tighten it up a bit but that didn't work. I tried the cable with another computer and it works fine. I checked device manager and everything should be fine there.computer is running Windows 7 Professional.Drivers are up to date, and nothing changed in the computer since yesterday when it was still working. Could it be just that the Ethernet cable port suddenly broke down? I also tried another cable, and that didn't work either. I restored the system to previous saved point.
i have a DSL connection which is established using a dial-up (PPPoE) modem. I recently bought a wifi router, and I found that when I plug the cable to one of the LAN ports and the laptop, it seems as if it wasn't connected at all (not detected on either side).I tried to format the system running on XP and I installed windows 7 but the problem persists.The only thing I can think of right now is using a crossover cable, but I somehow doubt that it should work since I tried plugging the router to my netbook (using a normal cable) and it worked like a charm. But maybe the fact that it's a quite old laptop (PB MV51-101) has something to do?
I tried 3 cables, and even one of them was new. So im sure the problem isn't the cables. For some reason, whenever I connect a ehternet cable to my computer, I cannot seem to get internet connection through it. Some days ago I installed this Wireless Lan device from a CD, that came with a sort of antenne I had to put on my computer. It works great, BUT its slow. Thats why i would like to go on internet with cable again. I remember one day to another that my computer didn't detect the cables anymore, what could be the problem?
Since changing battery my Dell C521 won't connect to internet. When I run set up CD it says it can't detect ethernet connection even though cable is connected.
Computer keeps saying that the I need to plug in a ethernet cable but I already did. This is happening on my Windows 7 Ultimate partition. I also have have a Mac OSX partition and the internet is working fine on that partition.Here is what I get for ipconfig/all command:[CODE]
My roommate and I are trying to set up the internet, but my computer won't detect the Ethernet Cable. Whenever I go to Network and Sharing Center and try connecting to the internet, the computer simply says "Windows did not detect any networking hardware", even though the light is clearly on and should be working. The cable is also new so it should be fine. I've also been looking around on the internet a bit, and in trying to fix the problem it looks like some of my Services are turned off, which seems to be causing the problem. However, whenever I try and turn them on, I get an error message saying "The dependency service or group failed to start".
I am having a problem with my Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC. It is not detecting my ethernet cable, and thus leaving me without internet on my desktop, after i updated its driver. The cable is not the problem as I have tested the cable with my laptop. I tried rolling back drivers, doing system restore and removing drivers with driversweeper and letting windows install the drivers again. However, none of these worked for me. I doubt the NIC is faulty as it was working before i updated the drivers. I am using windows 7 home premium 64-bit.
I turned on my computer an tried to connect to the internet and it says that it cannot detect any internet connections. I don't understand why it says this because it is connected through the Ethernet.
We currently have 1 PC and my laptop connected to the internet with 0 hassle. My father brought in his work computer last night and asked me if I could set it up. Only problem is I cannot for the life of me have it connect to the internet.
He has a PC with Win7, and when I search for a network it says there's no connections available. The PC is inches away from the modem. Also, our other two computers had no problem picking out the connection after a quick scan.
I started to lose hope when I ran an ethernet cable into the PC to see if I could get it to recognize the connection.
No luck. This is not a brand new computer, it's his work computer that before the move was operating just fine.
So I have a wireless router downstairs in my house that usually reaches around the whole house. However as of a couple days ago, whenever I am upstairs I only get limited connectivity. It still detects my router, but I an exclamation point and I can't connect to the internet. However when I am downstairs I have a connection that actually works. This applies to multiple laptops, computers, phones, etc.
My laptop connected to internet with wifi, but it cannot use even my laptop detect connected, when i run trobleshooter it's show 'no valid IP address' even i already set up to automatically detect , restart my wifi router and unplug doesn't make any changes
I have a netgear router model #DG834N connected direct to my desktop pc. the router is getting old but seems to generally be ok. However when my son tries to connect to my internet connection wirelessly his laptop does not detect my internet connection (I think) and consequently can not connect to the internet. We have tried to have him sit right next to the router and hopefully pick up a signal but that does not work either so I am guessing it is not a signal strength issue. I have read some things about setting up a network and adding him but it seems strange that I would have to do that when he can go to his friends houses and pick up their connection without a problem or without being added to a network.
I open the IE, it takes about 3 minutes to open up.Its says at the bottom left corner "detecting proxy settings". I went to Tools>Internet Options>Connections Tab>LAN settings> and unchecked Automatically detect settings, but still did not work.
Recently I bought a new laptop (Sony Vaio SVE1511HFXW) and I haven't been able to connect it to the internet wirelessly. I previously was working on a Sony Vaio VGN-NR series laptop that I had no problem setting up a wireless connection for. I ran my router set up disc on the new machine and basically everything got ruined. My other laptop lost it's wireless connection and connecting it with an ethernet cable didn't work either. So now both computers were not connected. Actually, all devices can't pick up the wireless anyway (I tried to get on netflix with my Wii and it didn't work) I restarted the router several times, reset it once and nothing happened. I could only connect with the cable after I reset the modem and router, but it's still saying it "can't detect an internet connection." When I ping the router I get an answer back.
Here's what I get when I run ipconfig in the command prompt:
C:UsersShinsei>ipconfig Windows IP Configuration Wireless LAN adapter Wireless Network Connection:
I have an RV110W, there's internet access directly from my DSL modem, but when i connect my router it doesn't see the internet connection. I've changed the network cable and also confirmed the correct configuration in the router.
I have used the WRT54GC (v2.0) router for a few years now, everything worked as smooth as butter, but a few days ago it just stopped detecting the internet connection. Everything works fine with the modem. After resetting the router, I tried to reinstall everything using the setup wizard but at the eleventh step, a pop-up message appears saying that it is "unable to detect the Internet connection" and, like I said previously, the modem works just fine. The username and password for the connection are correct (connection type: PPPoE).
I want to connect to the Internet small office where docsis (internet over tv cable) is used as WAN.For similar tasks but other WANs (adsl, dial-up) I used 800 series. But now I can't find anything in this series to solve my issue. There is 815 but it has no wi-fi.
I can use cable modem that my ISP gave to me: this modem acts as bridge so I can use router with FE-based WAN but it is better to have one device instead of two.
I have a Sony Vaio running Windows 7 Home Premium. Yesterday I accessed the Internet at the office over a Cat5 cable. Last night I accessed the Internet at home via my USB Internet dongle (actually an O2 mobile phone). Today neither works. I have also tried to connect to the Internet via Wireless and that does not work either.Needless to say my desktop (using the same Cat5 cable) works. My mobile phone can access the Internet on it own. And others can get the wireless to work.My Vaio can connect to all three; however, all three say "No Internet access".I changed nothing between last night and this morning. I have scanned through the list of Windows Updates and nothing has been downloaded in the past week. I have turned off my firewalls (in both McAfee and Symantec Endpoint Protection). I have run the three NETSH reset commands with Administrator privileges. I have rebooted my machine numerous times. Nothing works.
After i reinstall my PC, i can't connect my vaio (VGN-TX750P) to internet through internet cable nothing appears in Control PanelNetwork and InternetNetwork Connections wifi is working fine but I can't connect using ethernet
My computer is only one month old. I did a clean install of Windows 7 on it and a clean install of Ubuntu 11.04 (dual boot). With Ubuntu, the wireless works without issue. In Windows, the connection is fine through a cable, but wireless networks are not detected at all. Since I did a clean install, I had to install drivers manually. I got these from the Samsung website (my laptop is a Samsung Q430). I think that my Wireless card is Broadcom but I am not sure. The wireless did work at the start, but there were connectivity issues, and so I removed the wireless driver from the device manager and reinstalled the Broadcom drivers. Now I can't get any wireless at all in Windows.
I think I may be missing some drivers, but I'm not sure. I have the Broadcom Wireless Utility but I can't get it to do anything useful. Right now I'm connected through a cable. Here is the result of ipconfig / all.
I have a ethiernet cable that I can connect to my pc and get internet, when I connect that same cable to the wirless router, I can't get internet, what am I doing wrong.The PC I am using connect to other wireless routers on the same network, but this ethiernet cable only work on pc when put in direct
My laptop wireless suddenly stopped working yesterday ( this has happened before ) so I rang BT for them to mess about with the channels to fix it which usually works but my laptop cant even connect to the internet with the cable plugged in from the hub. The computer is connected with the wire now and is working perfectly fine. Ive read on forums it could be the network adapters ive checked and they are all updated. Ive system restored and still no connection with either wireless or cable .
The error message is that the cable isnt plugged in... but it is and i know its not foulty. when i change the networking speed to 100mbs full/half duplex it sort of flickers a bit like its trying to get contact with the router but it never establishes it