Can't Get Connected To Any Wireless Networks

Jan 17, 2012

I cant not get to connected to any wireless networks, it keeps saying unable to connect

View 1 Replies


ADVERTISEMENT

PC And Printer Connected To Different Networks?

Nov 24, 2012

I've been trying to connect my printer to my wireless router/modem. The install program is giving me the following error {The PC and the printer are connected to different networks(192.168.15.0 and 192.168.0.0). They must be connected to the same network. This can happen when you use the manufacturer's default network name (SSID) and another nearby network is using the same name.} I just had the computer built and have been setting it up. How do I know which is the right IP address?

View 6 Replies View Related

Cisco :: Subnetting Directly Connected Networks?

Feb 29, 2012

Why isn't it possible to make following configuration:

View 9 Replies View Related

Cisco :: Get ASA To Advertise EZVPN Connected Networks Via OSPF

Feb 16, 2011

I'm trying to advertise the branch LAN subnets via OSPF back to our core.I can create the OSPF adjacency and the ASA is learning routes fine. However it does not appear to be pushing the branch LAN subnets to the connected router. show ospf database reveals they're not in the OSPF database.Here is my routing config, the branches are 10.114.0.0 /16.As an aside, why I need the statics below, they appear to be necessary to reach my LAN subnets behind the EZVPN spoke sites. I would have thought the ASA would learn it automatically as I'm running network-extension mode on the spokes. [code]

View 1 Replies View Related

Cisco Firewall :: ASA 5510 Cannot Talk To Remote Networks Connected

Mar 20, 2012

We have an inside interface, 192.168.10.0/23We have an outside interface, public ip...We have the ASA connected to 5 site to sites, this is working fine and through the internal interface can access all remote sites and vice vera. These are 192.168.20.0/24, 192.168.30.0/24, 192.168.40.0/24, 192.168.50.0/24 and 192.168.60.0/24,When a user connects via Cisco VPN Client they can see the inside network but can't talk to the remote networks connected, for instance 192.168.40.0/24... whereas an internal user can. I understand that the VPN client connection is seen as an outside connection, not an inside connection... but then I read [URL] and I am confused even more.

View 8 Replies View Related

Cisco WAN :: Connecting Internet To Networks Connected To Router 2811

Feb 7, 2011

I have a big issue in providing internet service to the networks that are connected to a router. Also i do wanna know whether ipv6 can be used in 2811 routers.

View 2 Replies View Related

Cisco VPN :: ASA 5510s / Remote VPN Users Need To Access Networks Connected By Static VPN

Oct 23, 2012

I have five (5) sites all connected via static VPN tunnels.  They are all using Cisco ASA 5510s running 8.4(4)1. Any internal IP on each site can ping any IP on a remote site, because of the static VPN tunnels.  I have the external IP (routeable) addresses connecting to each other.

Site A: 10.1.0.0 /24
Site B: 10.2.0.0 /24
Site C: 10.3.0.0 /24
Site D: 10.5.0.0 /24
Site E: 10.10.0.0 /20

I have remote users who connect using Cisco AnyConnect 3.1 to Site E.  They get a static IP within the 10.10.100.0 /24 subnet (vpnpool00) and can access anything in the 10.10.0.0 /20 subnet. So far, so good.No management wants users to access devices within the other sites, specifically Site A using teh same AnyConnect connection.  In other words, they get an Ip address of say, 10.10.100.5 and now need to access a server on Site A's subnet or 10.1.0.5.I have checked my NAT statements and they appear to allow this, but so far when I do a ping I get the following:  Routing failed to locate next hop for ICMP from outside: 10.10.100.5/1 to inside: 10.1.0.5/0 What am I missing?  Is there a NAT statement that is wrong, or an access-list statement or possibly a static route?

View 10 Replies View Related

Linksys Wired Router :: RV016 - Allow Other Networks Connected To Firewall To Access Internet?

Nov 24, 2011

I have a sonicwall firewall connected to the LAN port of the RV016 router and two DSL modems connected to the WAN ports.
 
Ip address allocation:

Firewall
192.168.50.9
RV016
LAN  - 192.168.50.10
WAN - 192.168.60.1
WAN - 192.168.61.1
 
What configurations do I need to enter into the RV016 to allow other networks connected to the firewall(192.168.3.0, 192.168.2.0) to access the internet?

View 1 Replies View Related

Wireless :: Two Networks At The Same Time?

Apr 20, 2012

I have a wireless lan and a USB Modem Can I use Both at the same time to download two files each file on a lan

View 1 Replies View Related

Can't View Wireless Networks?

Aug 22, 2011

I have a Dell inspiron that is about 3 years old. About a month ago I wanted to connect to a wireless network, but there were none visible. I was in a coffee shop where I know there was a strong signal, but nothign showed up. I checked with a friend who was with me, and not only was he connected, he could see 5 other networks in the area - I showed none, even though when I put my mouse over the icon in the lower right of the try, I got a message that there were wireless networks available.Even at home, where it connected automatically, if I clicked on view wireless networks, ny own network that I was connected to wouldn't even show up.

View 19 Replies View Related

PC Not Detecting Wireless Networks

Oct 29, 2011

My PC usually shows me a list of wireless connections when i click on that icon.Today, however, it is not showing the list and displays the following message instead:'windows cant configure this wireless connection.' no list, so i am not able to connect to my network.i tried setting up a wireless network through wizard but to no avail. I dont know why this is happening. i got a new wifi modem. i cant even blame the new connection alone, because before that my pc at least used to show other inaccessible wireless networks in the list. but today it shows nothing.i have a windows xp.

View 1 Replies View Related

Wireless :: Cannot Connect To All Available Networks

Nov 3, 2011

i cannot connect to the available network even the homegroup.i have do troubleshoot but it cannot fix.and tell that i have problem with my adapter network..

View 1 Replies View Related

Wireless Networks Not Showing Up

Mar 22, 2011

I've just installed windows xp pro sp 3 on my laptop and am going through installing the drivers for the problem devices. I've got everything installed minus the drivers for the sound card. I'm trying to connect to my wireless network and am not having much luck. I know the network is available because i'm on it right now sending this message. However with this new installation everytime i refresh i'm getting the "No wireless networks were found in range" message. I'm also not getting any yellow question marks in the device manager window for this device. I know the card works because it worked just fine with ubuntu before i wiped the hdd and installed xp ....

View 9 Replies View Related

No Wireless Networks Detected

Jul 31, 2012

My friend uninstalled some programmes on his Toshiba laptop and now he can only connect to the router via an ethernet cable. When trying to find wireless networks the message "No wireless networks detected" appears. Other laptops and devices have no problems connecting throughout the house. I've uninstalled and reinstalled the right drivers for the wireless adapter, checked that the TCP/IP settings are on obtain ip address automatically, checked that the NIC is enabled in the BIOS and checked that the WLAN is on automatic in the services utilty and there is no other WZC running.

View 3 Replies View Related

Bridging Two Wireless Networks?

Aug 27, 2012

My current project is to have a printer that actually works. You don't need one often, but when you do you really need one. I'd like the printer to be wireless as we all use laptops but don't want to have the printer near the router.

The simple solution is to shell out for a wireless printer, but I have access to a cheap (and good) ethernet only printer. Now, how to connect it? I have a spare old router, which I'm thinking of connecting to the printer. I'd then have to get the router to join the network (is that possible?) or somehow bridge them. The to devices to join would be this and this.

View 1 Replies View Related

Searching For Available Wireless Networks

Jan 26, 2011

I've just reformatted my computer and reinstalled windows xp but i can no longer find the window where you search for available wireless networks. It used to be a little icon in the bottom right of the task-bar.

View 6 Replies View Related

Wireless Keeps Cutting Out With Certain Networks?

Jun 13, 2011

I have a windows xp system with a dell wireless WLAN card. I have found that when I try to connect to certain wireless networks - most recently the BBox network through Bouygues Telecom in France - it will connect, work fine for a minute or two, and then disconnect automatically. I can reconnect by going into the WLAN Card Utility and re-entering the WEP password, but I don't know why it cuts off automatically. I also noticed the same thing happening while trying to connect to a friend's wireless in London, England (not sure what the provider was). Other computers don't seem to have the same problem.

View 1 Replies View Related

Can't View Wireless Networks

Feb 22, 2012

When i first set up my wireless i could see it but couldnt authenicate and connect.I was using fire fox as my browser. I could also see my neighbors network. I downloaded internet explorer and now i cant see either one. i have a program calle dconnectivity doctor and it can see both networks. Iam not a computer whiz .

View 1 Replies View Related

Can't Find Any Wireless Networks

Nov 16, 2012

I cannot see any wireless network on the list of wireless networks. My Laptop is Acer Travelmate 4502 on Windows XP. I ran ipconfig in command prompt. [code]

View 4 Replies View Related

View Available Wireless Networks

Jun 24, 2012

What changed on my Win XP wireless network connections, but I used to be able to see about 5 wireless networks in the neighborhood, including mine. Now it only shows mine. Not that I can connect to any of the others (don't have the security codes), but I find it strange that it used to show all of them, but all but my own have suddenly disappeared. Did I check some setting somewhere (that I can't find now) saying to show only the strongest connection?

View 1 Replies View Related

Can't Connect To Wireless Networks Other Than WEP

May 7, 2012

I have a RTL8187 wireless adapter. First of all, it did not come with windows 7 driver so it was a pain finding one. I found the latest ones though, but it seems it doesnt work (no networks will show). I have to choose the pretty outdated drivers, and it cant connect to WPA, WPA2, and hell, even open networks.

View 6 Replies View Related

Not Finding Wireless Networks?

Feb 23, 2013

I recently had to clean up a laptop of a few years worth of crap and no protection on the machine.i had to do the disk clean up in safe mode as it ran far too slowly to do anything without a monumental level of patience, the problem i have now is that the computer doesnt seem to be picking up the wireless network around the house even though other units laptops are working fine.

View 1 Replies View Related

Combining Two Wireless Networks?

Mar 10, 2012

Recently I have had a thought about changing the networking around my house.urrently we have two routers as my house is very tall and not very wide, they are called JohnsonNet1 and JohnsonNet2. Is there a way to get them to run one network called JohnsonNet?

View 3 Replies View Related

Wireless Networks Not Showing Up?

Jan 16, 2012

I have added a wireless network on my computer but it isn't visible from the networking connections drop down. Why?

View 3 Replies View Related

3 Computers On 2 Different Wireless Networks?

Mar 12, 2012

One of my business customers need a network set up a certain way.They have two XP computers right now. Their internet connection is wireless through a Verizon Mifi. They also have a crossover cable through the wall so the two computers can share files.They are going to add a 3rd Windows 7 computer and turn one of those XP computers into a server where all the files they need to access (Quickbooks, etc) will be stored. They do not want the server to have internet access at all. Becuase of the way the building is set up, I need to add a wireless router to the mix. The Mifi will only be for the two client computers to connect to the internet and the other wireless router would be for the two client computers to connect to the server to access their files. I tried yesterday to add the wireless router to the mix by having one computer (XP) use one wireless card to access the Mifi with an IP address of 192.168.2.1 and another wireless card to access the wirless router with an IP address of 192.168.1.1. It connected to both perfectly, but then got confused as to which wireless connection to use to access the internet. I've read about how you need to use two different gateway addresses on each to seperate them inside Windows but wanted to make sure that's how I needed to do it before I went out there and tried it.

View 11 Replies View Related

Get Virtual Adapters One Face Connected To Laptop Another Connected To A Physical

May 10, 2012

I need to have some (maybe four) virtual network interfaces, one face of them connected to my laptop and another face bridged to one of my physical network interfaces.How can i do that?Ive tried VirtNet and Microsoft Loopback Adapter but no success.

View 1 Replies View Related

LAN Disconnected / No Wireless Networks Detected?

Jun 30, 2012

I recently did a recovery on my laptop and had to put everything back to factory settings (losing all my music, programs, etc) due to a hard disk issue that I couldn't fix otherwise. After several hours waiting for the process to finish I logged onto my laptop - a toshiba, and realized that my wifi isn't working. The computer says there is an issue with the LAN being disconnected, but my router is communicating fine with other devices. Also, the side switch that turns wifi on and off is lit up (indicating that it is on) despite the fact that Fn + F8 are not responding on my computer. Generally, the laptop cannot detect any wireless devices or routers.I did another system recovery after reading about the issue, and tried turning it on and off, etc, but with no success.

View 1 Replies View Related

Laptops Cannot Find Wireless Networks

Aug 22, 2011

Suddenly, for some reason, my two Lenovo laptops last week (one is Windows XP and one is Windows 7) couldn't find any wireless networks. When I click on "View Wireless Networks" all that comes up is the Iban computer to computer network.I know the wireless network router is working as I can connect to it with my non 3G iPad. I also took both computers to work and couldn't connect to an open wireless router there.

View 3 Replies View Related

Windows XP - No Wireless Networks Discovered

Jan 10, 2012

I was on the computer, it went into standby due to low battery. Turned it back on, and it wouldnt connect to the net as it couldnt find any connections. Tried repairing - to no avail. Checked all my networks were working, and enabled one that wasn't. Restarted computer still no connections being found to connect to.Windows XP, Asus, Service Pack 3, Version 2002.

View 4 Replies View Related

Laptop Does Not Detect Any Wireless Networks

Jun 22, 2011

My HP laptop's wireless does not detect my home wireless network.The wireless is on, there is internet connectivity and other devices at my house detect the network but not my laptop. i hve already spent so much of time in finding out the problem.The driver for the wireless is installed and updated.The service is running. Checked the Wireless Zero Configuration.

View 9 Replies View Related

Unable To Find Wireless Networks

Jan 16, 2011

I have a laptop that won't find any networks, it did work a few days ago now it's just randomly stopped.Things I've tried;

-Changing the wireless to different channels.
-System restore to a few days before.
-Check and restarted the wzc serice mutiple times.
-Check the drivers are ok.

View 8 Replies View Related

Cannot Connect To Certain Wireless And Hardwired Networks

Jul 25, 2012

have a dell inspiron 1545 with windows vista. Sometimes at coffee shops I cannot connect to the internet. It says that I have local access only. This also has happened when I use my hardwire internet connection. Then at times it does work on the same network. It is not a network problem as I can connect with my iphone or other devices.

View 14 Replies View Related

Wireless Network Not Listed In Available Networks

Jul 4, 2011

I recently bought a Medialink Wireless N router and configured it as per the instructions. I have a desktop computer connected to the router now and it works great with a wired internet connection. However when I try to connect to the wireless network with my laptop, the network does not appear in the available list of networks. The broadcsting SSID feature for the router has been enabled. I am not able to figure out if it is a problem with the wireless network or my laptop, because my laptop has been acting weird lately. Is there a way to test that the wireless adapter on my laptop is working fine. I am able to see other wireless networks on the list. How do I know for sure that my wireless network is set up right?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved