Cannot Network XP To Windows 7 And KVM Switch
Jun 8, 2011
I have an old XP machine with many useful but obsolete programs and history.I have a new Win 7 HP (home premium) HP Slimline.I have a KVM switch allowing me to control each independently through one keyboard and mouse.I have several external drives, DVD drives and a wireless mouse hooked to the W7 by USB.Each computer is wireless connected to Internet via a Verizon MIFI2200 (essentially a G3 mobil phone).I have no other suitable optioons for internet available in my rural area.I ran the network setup wizard on the XP and saved a copy to thumb drive problems:
1. The W7 computer won't recognise the setup.
2. The XP doesn't show the network I set up although no errors showed up.
3. Win 7 has removed any wizard and other programs from HOME PREM for setup a network.
4. I attempted to set up the W7 manually but it refused too alllow both computers to independently use the MIFI2200.I find all hardware works fine the way I now have iit configured, but I want to move files from old to new PC and I need printer sharing until I get organized. I also need access to an external drive to backup files and general storage from both compputers.
View 4 Replies
ADVERTISEMENT
Aug 2, 2011
I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies
View Related
Jul 1, 2011
I am running windows 7 home premium 64bit and have a wireless connection. Can I connect a switch to my LAN port on my PC and share my network connection with other devices? Would it operate as a standard switch would operate coming from a router?
View 1 Replies
View Related
May 14, 2011
Windows 7 with wireless adaptor connection
I switched to Win. 7, because XP getting slow in general. I've using the brand new Netgear wireless adaptor on Win.7 while the older wireless adaptor is still on XP, but I never use XP after switch to Win.7.
On XP, Wireless connection had no issue at all, however on Win.7, the wireless connection often saying 'not service available' at the right bottom corner.
On XP, Netgear was 150 and Win 7 is 300.
Just wonder whether I should take off the wireless-adaptor from the XP if that would work to boost the wireless connection on Win.7?
View 1 Replies
View Related
Jul 25, 2011
In win 7, I do not find a terminal emulation program, how can i connect to CLI of Cisco 300 series switch through its console.
View 2 Replies
View Related
Dec 10, 2012
i am also facing the same problem with lenovo machine in windows 8 ,i have updated WLAN drivers ,even WLAN switch is on ,but still not able to diagnose the issue?
View 1 Replies
View Related
Dec 10, 2012
i am also facing the same problem with lenovo machine in windows 8 ,i have updated WLAN drivers ,even WLAN switch is on ,but still not able to dignose the issue
View 1 Replies
View Related
Dec 14, 2011
we have Core-Siwtch 4503 in the main building which is connected to another Core 4503-E in another building ,, now our PCs connected to the 4503-E ,,, any XP M/C can pick an Dhcp-ip but and M/C run Win.7 Cannot !!
action taken :
1st we try to connect our win 7 pc in the node which was connected to xp M/C ,, and it didnot take ip from the DHCP . ,, 2
2nd we ensure from the core-switch configuration and its normal with no mistake
3rd trying to use tool from Microsoft Fix-it Center whih name is ( Microsoftfixit 50475 ) which is just .msi file but the problem face us is that this tool donnot accept to run on win 7 cause its made for vista .
4th after some researchs we notic that there is some modifications have to be performed on registery by disabling the dhcp broadcast flag we did it but nothing change yet
5th now we are waiting to perform another action which is Disable the IP Helper service in win 7
View 6 Replies
View Related
Aug 26, 2011
I am using Dell Inspiron 4010 with Win7 Ultimate installed in it. what is run command to switch on the bluetooth?
View 1 Replies
View Related
Jun 5, 2011
I'm looking to connect my 50+ drops I have in my home based business. I transfer large files 5+gigs on a regular basis between the machines. I currently just have some cheap Netgear 8port, gigabyte switch's but when transferring files I max out around 12-15mb/sec. This takes WAY too long to transfer files.
I need a network switch so I can get my speeds up to 60+mb/sec at least. (my seconds job office has this ability)
What would I need to get this kind of speed? All my cabling is CAT6, with CAT6 ends. Would I need a managed switch to get this kind of speed?
I was looking at a couple switches. Cisco Sg 100-24 24-PORT Gigabit Switch $374 or Cheaper option Netgear Prosafe GS724T-300NAS 24 Port Gigabit Smart Switch W/ Rack Mount Kit $199
Or is there something else I could go with in this price range?
View 8 Replies
View Related
Aug 21, 2012
This past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies
View Related
Oct 6, 2012
reinstalled my windows 7 and it doesn't have the network adapter drivers,so i go and dowloand the drivers i install and it still says no drivers installed, and yes i got the right driver,i tryed everything just cant get it working
View 2 Replies
View Related
Jan 28, 2013
I run a certain program in my PC and I need to make its data available to an iPhone app.I would like to broadcast it over WIFI from the laptop.How can I set up a simple wifi network so the iPhone can connect as described?I was thinking of wireless router connected directly to the PC.
View 6 Replies
View Related
Apr 28, 2012
I have setup an ad hoc network on windows 7 and I have apache httpd server running.I can connect to the network and access apache index.html page using the ip address from my iPade.g. 169.254.111.111The windows computer name is test-pc and I have a virtual host setup in apache called mytestpc.comWhat do I need to do to access this from my iPad using http://test-pc or http://mytestpc.com
View 1 Replies
View Related
May 17, 2011
My local DHCP server mis-assigns IP Addresses of 192.168.x.x to laptops every morning.It has been suggested that one of my print servers (two Fierys and a Creo) is pushing 192.168.x.x onto the network but I think I've ruled that out. have an XP Pro desktop running a standard Windows bridge that connects a wireless Netgear router to the local Cisco switch. This has worked flawlessly for a couple of years so I hesitate to blame the bridge.My remote IT dept pushed a change/update to all locations having to do with address lease duration. I do not know details.Is there a way I can identify the source of the problem if I do not have admin access to the DHCP server? The only local control I have is to cycle power.
View 13 Replies
View Related
Apr 1, 2013
I have an office addition in which I've extended the network connection from the wall by adding a 4 port Linksys workgroup switch. This was done so two salespeople could share one ethernet wall connection. They've been complaining about internet speeds, so I did some tests.
1) Replaced the Linksys workgroup switch with a higher end 16 port switch we had on hand from Allied Telesis (an AT-GS950).Resulted in no change in speed on the two user computers (one desktop, one laptop; both seeing avg of 7 Mbps). However, when I connect my laptop, the speeds were twice as fast (15 Mpbs vs.7).I looked at the NIC configurations to compare settings and we all had the same settings.
2) When I eliminate the switches altogether and hook the user's computers directly to the wall connection, the speeds are as promised by our ISP (15 Mbps).Is there something I need to configure in these switches to speed them up?I don't think it's possible to manage the Linksys. Is my only option at this point to pay for another ethernet re-wire so each of them can connect directly via the wall and eliminate the switches?
View 2 Replies
View Related
Sep 28, 2012
I've currently got my network setup similar to the picture below, except:
1. I only have PC1 and PC3 connected. Both PCs are running Windows 7.
2. I've got an XBox and PS3 connected to the router
My ISP provides two IP addresses, PC1 has its own IP and the Router has the other one. All devices are able to connect to the internet; however, PC1 is not able to communicate with the devices connected to the router. Is there anyway to get this network to work? I basically want it as if all devices were just connected to the router, but with PC1 having its own IP, and the Router having its own IP.I've used the exact same configuration in the past with both computers running Windows XP and was able to get the two computers to communicate by installing some protocol. However, I heard that the protocol was really outdated or something and not good to use for security reasons, but it did what I wanted it to do so I used it.
View 5 Replies
View Related
Mar 2, 2013
[code]...
I assume I have done everything correctly but am not getting any speed increase when transferring files (in fact it has dropped a little) I currently get about 7.5mbps between my computer and my server. All are wired connections.I have the modem/router connected to the Gigabit switch and the switch is connected to my server and a PC. Slight complication is I use 200mb homeplugs to connect from the switch to the PC, the server is connected straight to the switch, also I am waiting on some cat6 cables I've orrdered I have no idea what I'm using...
View 1 Replies
View Related
Feb 9, 2012
A brand new network switch how i check this network switch on may pc how to communicate this switch very 1st time with pc
View 3 Replies
View Related
Jan 14, 2011
it shows that it is connected but i can not see other computers in my network places. i have a network server and is running server 2003
View 2 Replies
View Related
Aug 2, 2012
I have a network which was recently switched from dsl to comcast. The default network is 10.1.10.1. The dhcp is working with the 5 or 6 installed pc's. All pc's are running xp professional.I inserted the dlink 4 port switch to add a new port by inserting it between the router and a pc.
View 4 Replies
View Related
Oct 31, 2011
I am using a network switch to share my broadband between four PCs.Among these PCs, one is for students. Is it possible that I can do the following 2 things from modem whose page can be accessed through 192.168.1.1;
1. Restrict some website like Facebook, Youtube etc
2. Limit download speed of that PC to 100KB/s
View 8 Replies
View Related
Mar 21, 2013
i have a 20 story high rise condo bldg that i am providing internet service to. I have a 8 port managed network switch on the 1st floor. I have a cat6 line ran from each port to the 8 distrabution closets in the bldg.My question is this if i am using a managed switch to send the signal to the other switches, do the other switches also need to be managed? or can i use unmanaged switches at the other locations. I do not want each condo on those switches to be able to see or comunicate with the other condos on those switches. I am using 48 port switches in the 8 distrabution closets.
View 5 Replies
View Related
Feb 10, 2013
Well, a while back, I posted about getting a Network Peripherals KeyStone24MG, and now I have a 9-pin RS-232 cable to connect via console. Now what do I do? I connect with hyperterminal on COM-1, and it only shows a white screen :/
View 1 Replies
View Related
Mar 25, 2011
I am still not able to get internet access through my network switch. Where I want to have the switch, I have a TV (with LAN port), PS3, a network capable hard drive, and a iMac. I want to be able to connect the switch to the ethernet jack on the wall and then connect the components to the switch. So here is a map of what I want to do:Actiontech Router (FIOS standard) ---> LAN port on the wall ----->D-Link DGS-1005G switch---->PS3,hard drive, iMac, TV.When I try this setup, everything looks fine, but I do not have internet access. When I connect directly to the wall jack, I always get internet connection. I have tried two different switches, but still no avail.I have tried assigning static IPs to each of the systems, but have had no luck in getting them to connect. The LAN jack is wired directly into the actiontech router. The range on the router is 192.168.1.10-192.168.1.256 (192.168.1.2 is a dd-wrt range extender).
View 7 Replies
View Related
Jun 12, 2011
how I would go about adding a network switch to my wireless router. Upstairs with the modem is a Netgear N600 set up as a base station and downstairs I have another Netgear N600 repeating both the b/g and n signals. I now have a Linksys EtherFast 4-port switch that I want to add into the network on the repeating router.
View 4 Replies
View Related
Jan 14, 2011
I know the general difference between a router and a switch, but after considerable reading I'm unable to determine if I could just use a switch for my pretty simple specific application.
Here are the two devices I need to setup on my network (connections would be wired, both devices in close proximity): (1) computer running windows2k with 100mbps ethernet card (has software firewall installed) (1) blue ray player for streaming netflix videos
Because I don't have any computers on the network communicating with each other, based on what I've read it seems possible to just connect a switch to my cable modem instead of using a router.
View 4 Replies
View Related
Jul 18, 2011
Question on two ethernet cables
But I am wondering will my overall connection speed decrease if I have multiple devices on? I am just curious as to if I have both say an xbox 360 and my computer on.
View 2 Replies
View Related
Feb 7, 2012
new to networking, I can not fully understand concepts like VLAN, so I would like to know whether it is possible to have a a few VLANs without a switch but over a bridge (created under linux - connecting a few virtual machines).
View 1 Replies
View Related
Jan 17, 2013
How do i install a network point from a switch.
View 1 Replies
View Related
Sep 21, 2011
I already have a wireless router but the signal strength doesn't seem to penetrate brick walls well. I want to add another wireless switch to access the same Internet but am not sure exactly what I should purchase. I know I don't want another router, so what should I buy?
View 4 Replies
View Related
Apr 26, 2011
windows 7 pro cannot see anything on network,others can see me
View 2 Replies
View Related
Sep 4, 2011
I've previously had a desktop and laptop both running XP and happily sharing on a network. I've upgraded the desktop to Windows 7 and now the network won't work properly. My XP machine can recognise the Windows 7 although access is denied when I try to go into the files (I have set the appropriate sharing settings on Windows 7).
View 10 Replies
View Related