I am trying to access the cisco view but a message appears notifying me to install the devices packages, i have tried to do an online update from the software center, but it did not work.
the devices that i have are, 2960 switches and 6500 switches and 3560 switches.
I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies View RelatedI have an existing stack of 4 x 2960-S switches connected by stack cables.I would like to add another 2960-S switch to the stack but am unable to as the 2960-S will only allow 4 x 2960-S switches per stack.how I would add the 5th 2960-S switch to the existing stack of 4 x 2960-S switches.
View 12 Replies View RelatedI have a 24 port 2960-S that is not communicating with a 2960-LST that it is directly connected to over fiber. The link is up on the LST but will not come up on the -S. What command should I use to bring up this link? I have tried no shut from the (Config-if)# prompt.
View 3 Replies View Relatedwhen any user logs into LMS #1, GUI says "user not authorized to view devices". All of my users are set to "full permissions" so it seems to be some disconnect here. I'm using ACS for auth, that seems to be working OK. I have a second system LMS#2, setup exactly the same, which works properly, all "full permission" users can access all device menus.
View 1 Replies View Relatedwe have installed a new appliance of LMS 4.2.2 in our VmWare environment. The platform is running licensed to work with 1300 devices. We have approximately 500 devices in DCR, most of them are small switches ranging from Catalyst 2950 to Catalyst 3750, and also a bunch of Nexus 5548 switches.CiscoView is not working for any of them, we get an error message which we cannot interpret. We have updated to the newest possible device packages, but all to no avail.
View 2 Replies View RelatedWe have installed LMS 2.5.We are not able to view TOC(Table of Contents of RME(4.0.3).
View 2 Replies View Relatedmy laptop only has hdmi port and my tv only supports s-video and scart connection but i've an old pc that has s-video connection and i was wondering if i can "send the screen" from my laptop to my old pc via lan is there a way of doing that at high fps? remote desktoping works but it's very slow.
View 2 Replies View RelatedI have a DVR connected to my router.I have viewed the cctv over the net before using this setup, but I think I need a DNS service so that I can use IE to log in remotely? The free one I signed up to before wants money - I only need it for a few days while i am away
View 3 Replies View Relatedwant to view the Log on the Cisco 2821 router for any issue occur.
View 2 Replies View Relatedview cached CDP neighbor information in LMS 4.2.
In LMS 3.1 it is displayed in the Device Center summary section, but I cant find it in LMS 4.2 Device Center.
The regular problem with the LMS topology and WAN Links when you see the branches are disconnected from the HQ BUT in my case the branches are already connected via Layer2 links but unfortunately some intermediate layer2 modem/switch exist in some branches which prevent CDP discovery but you will find both HQ and branch router in the same subnet .
View 1 Replies View RelatedHow to get the Detailed Device View in LMS 4.0 ? From what I have been able to find out I should be able to go do Monitor> Fault Settings> Setup> Fault Device Details, select a device, click View and then click the device name link.Unfortunately the device name(s) displayed are not links, just text.
I need to get the the Detailed Device View so that I can block certain interfaces/events from generating alarms, specifically ISDNB channels when voice calls are made.
I can connect via VPN with the QVPN but once I am connected to my network I cannot view the resources available to me by LAN. I am nowhere near aware as to why.
View 4 Replies View RelatedI upgraded the LMS 4.0 with LMS 4.0.1 but now the events are removed of Fault View. The equipments than I am monitoring are: ME-3600, ME-3800 and ASR 9000. This is a configuration problem or I have to update something else?
View 1 Replies View RelatedHow can view the scheduled archiving job in lms 3.1 ?
View 1 Replies View RelatedA website that I usually go to has all of a sudden stopped working for me. It is hackforums.net which I know is up because I have been on it outside of my home network. Every computer on my network will not allow me to go on hackforums.net . I have not added it to a firewall or anything. I have even set my router back to factory default and it still won't let me view hackforums.net from inside my network.
View 6 Replies View RelatedI can't view a specific site from my machine, but can from 2 others on the same network. Tried both IE(8) and FF(4) and still no luck. Running Norton AV and disabled.still no luck. Flushed DNS as well as rebooted. Still no luck. Was able to access at will 3 days ago, but not now.
View 1 Replies View RelatedI have a Dell inspiron that is about 3 years old. About a month ago I wanted to connect to a wireless network, but there were none visible. I was in a coffee shop where I know there was a strong signal, but nothign showed up. I checked with a friend who was with me, and not only was he connected, he could see 5 other networks in the area - I showed none, even though when I put my mouse over the icon in the lower right of the try, I got a message that there were wireless networks available.Even at home, where it connected automatically, if I clicked on view wireless networks, ny own network that I was connected to wouldn't even show up.
View 19 Replies View RelatedI want to keep my documents on my XP SP2 machine, but be able to edit them from a windows 7 laptop. Points so far:1. I can print from windows 7 to XP OK.2. Before I re-installed XP this was working fine.3. The workgroups match4. I can see the XP files on the windows 7 machine5. When I click on an XP file on the windows 7 machine, it goes very slowly, then gives a "Not Accessible" error.6. I have not used passwords to set this up.
View 3 Replies View RelatedWe have two different groups in network say 'A' and 'B'. My network is B. I can view the computers in my group simply by clicking "view workgroup computers". I wonder how I can view the computers in group 'A'
View 2 Replies View RelatedI am having some trouble trying to connect to a different network. It seems when I click connect to a network there aren't any networks listed. Now, I know there are networks available near me because I have connected to them before it just seems that now some service or setting is disabled on my laptop that is preventing me from viewing other networks near me. Not sure what it could be but I have tried figuring it out and I couldn't.
View 3 Replies View Relatedin another location from my desktop that is only using my wired network, or do they both have to have wireless? I say this cause under those conditions i noticed that with my net book next to my desktop i am able to share files with one being wired and the other being wireless.
View 1 Replies View RelatedWhen i first set up my wireless i could see it but couldnt authenicate and connect.I was using fire fox as my browser. I could also see my neighbors network. I downloaded internet explorer and now i cant see either one. i have a program calle dconnectivity doctor and it can see both networks. Iam not a computer whiz .
View 1 Replies View RelatedWhat changed on my Win XP wireless network connections, but I used to be able to see about 5 wireless networks in the neighborhood, including mine. Now it only shows mine. Not that I can connect to any of the others (don't have the security codes), but I find it strange that it used to show all of them, but all but my own have suddenly disappeared. Did I check some setting somewhere (that I can't find now) saying to show only the strongest connection?
View 1 Replies View RelatedI recently changed webhosting partners for my company's website. With the Change I can view my company's website from inside the LAN but can outside of the LAN.
View 1 Replies View Relatedcan view other computers but i cannot access them. i have 2 vista machines one xp and one windows 7. ive tried different hubs, switches and routers. wired and wireless.
View 14 Replies View RelatedI've just setup my router and dvr system. I have my DVR wired to a Linksys E1200 router. At home view by using url....it then prompts me to log in and voila I can view. I tried setting up the port forwarding although I'm not sure if I did it correctly or not. I got onto my routers webpage. Went to "applications & gaming" Named port, selected both, put in DVR's ip address and clicked save. Came to work and tried to view it and I just get the "cannot load webpage" page.
View 18 Replies View RelatedI have just started using D-Link 655 router and ATT DSL connection at home. There is an internet signal. Skype is working. But I can't open any sites. Ie tried typing hotmail, Google, anything - sites do not open. Ive tried to plug in the Ethernet cable directly into my laptop and I get the same result sites don open.
View 7 Replies View RelatedLooking for a show command to display the actual physical Ram modules inside a 2911 router. I believe they come with 2x ram slots and I need to know if it has 1 ram stick or 2.show version displays the total amount of ram, but not if its 2x128 or 1x256 etc.This is also production gear so I cannot open it up and have a look until the scheduled downtime.
View 3 Replies View Relatedi want to know if someone here know how to observe the network performance? and u know what kind of software that can do the observation on the network performance?
View 6 Replies View Relatedhow can i view the port G27 and G28 in GUI? As based on the GUI Adminstrator - > Port Management - > Port Setting i only can view from port G1 to G26. Or it will only appear when the port is active for stacking.
View 3 Replies View RelatedI have problem with topology view in LMS 4.2.1, it doesn't show the tunnels connecting branches, though both devices are shown in sh cdp neighbour command output. If I choose Show Devices in Admin > Collection Settings > Data Collection, it is showing cdp neighbours correctly.
View 4 Replies View Related