Cisco :: View Scheduled Archiving Job In Lms 3.1?
Apr 16, 2012How can view the scheduled archiving job in lms 3.1 ?
View 1 Replies
ADVERTISEMENT
Cisco :: LMS 4.1 Not Archiving Configurations?
Aug 12, 2012My devices configurations are not getting backed up.
View 1 Replies View RelatedCisco :: Archiving Log Files Before Purging With CSM 4.1
Apr 4, 2013i have more than 8 month when i install CSM 4.1 i haven't any problem with using CSM 4.1 but now i want to know how can i archive logs files and before purging and how can i saving reports and events to an external disc
View 0 Replies View RelatedD-Link D-ViewCam :: 3.3 / Setup 4 Cameras To View With Remote Live View?
Apr 12, 2013I am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies View RelatedCisco :: LMS 3.1 Cannot Receive Scheduled Reports On Email
Sep 3, 2011Though other logs are being received through the email.
View 1 Replies View RelatedCisco :: Creating A Scheduled Task In LMS3.2?
Jul 1, 2012create a scheduled task in LMS. In this task I would like to regularly check time on all network devices in LMS and generate a rapport about this that would be sent to e-mail. All network devices have the same NTP server. How can I create this task? LMS version is 3.2 SP1.
View 4 Replies View RelatedCisco :: Scheduled Configure Collection Job Is Failing / LMS 3.2
Jun 13, 2011Usually the configuration files are fetched once every week. Lately, the Scheduled Config collection job is failing for all the devices. I have tried to “sync Archive” from LMS 3.2 on some devices but nothing happens. The switches out there are C3750, 2960, 2950, 3550, 3650 and some routers.The server is Win Ser 2003.
[URL]
Cisco Wireless :: RV120W Doesn't Enable APs As Scheduled
Feb 10, 2011I'm trying out the RV120W wireless router with the latest firmware. I have two APs set up with different schedules. However, the router fails to enable the APs as scheduled and I have to cycle the power to get the APs going again.
View 1 Replies View RelatedCisco :: Discovery Settings Of Scheduled Job Doesn't Change - LMS 4.0.1
Aug 8, 2011I use CiscoWorks LMS 4.0.1.
I planned a discovery of devices for some time, but if I change the parameters of discovery (adding a seed device) in "Discovery Settings Summary", this change does not apply in the scheduled task.
If I change the settings in the scheduled task, the changes do not apply in "Discovery Settings Summary". We must change the settings 2 times.
Scheduled Load Balancing With Multiple ISPs?
Oct 23, 2011Friend of mine has a setup out in the sticks, currently with two ISPs: Hughesnet satellite, and a line-of-sight WiFi provider; they're also getting a cel tower within range soon and he's looking at adding an HSPA/LTE connection via that as well.the first gives him a static IP and ridiculous speed and bandwidth at night... but far less speed and a painfully low bandwidth cap during the day (you go over, you pay through the nose).
The second gives lots of bandwidth but poor speeds (difficult to even watch a YouTube video) and a constantly-changing dynamic IP.The third, once implemented, will give him good speeds and decent bandwidth (I believe up to 10GB/mo) but again, will get spendy if he goes over that limit.Right now, I've got him set up with both routers plugged into the same network, multi-homed the NICs on his machines (192.168.0.* for Hughes, 192.168.1.* for LOS) and a little script on each computer that will change the default gateway to let him select which ISP he wants to use... however, it's going to get trickier with a third, and will make it even tougher to keep track of the bandwidth used on each one... especially with multiple computers, a DVR, and two users.
So I'm looking for some way to automate all this... something that will, say, use the HSPA feed most of the time for his whole home network, switch to LOS if it gets near the cap, and switch everything over to the satellite automatically during "unlimited" hours. Again, I'm not opposed to setting up something PC-based with the appropriate software, although for my own sanity, it would really need to be Windows-based (I'm way below n00b with Linux).
Home Network :: Wireshark Or Tshark Scheduled Captures?
Dec 11, 2012I'm trying to schedule a 90 second capture every 20 minutes to coincide with a process I have running. I have created a batch fun to run tshark.exe with the command to stop after 90 seconds, and an output file (-w). This all works, my challenge is that the next time it runs it overwrites the previous file. Is it possible to make tshark timestamp the filename? or is there something clever someone can recommend with a batch file to copy last version somewhere else and rename, so that I can have the process running constantly.
View 3 Replies View RelatedSW For Performing Scheduled Speed Tests On Internet Connection?
Jul 12, 2011We're since long having a problem with a DSL internet connection. The connection goes down periodically, for short times, and when performing speed tests, the connection speed varies and is usually lower (0.7 Mbit/s) than what the ISP promises (1.5-2 Mbit/s). Moreover, what modem is being used seems to have an effect.Now, I want to trouble-shoot this and get some hard facts on the behaviour of the connection. I would like to do repeated speed tests over say 24 h or so. They should be done every 3 min or so (to catch short glitches).
My question is: what software tool can I use for this? I have been searching the internet for hours, downloading a handful of applications, without finding anything that I could use. There are loads of applications that log and graph the current upload and download speeds, but that's something else - I need a tool that downloads/uploads files from/to a server, in intervals specified by me (3 min), logging the result and presenting it graphically.
D-Link DIR-655 :: Scheduled Enabling Of Wireless Seems To Reboot Router
Mar 1, 2012A few weeks ago I noticed that at 9:00am sharp every morning my internet access dropped, and would come back up four minutes later.
The router is connected to a DSL-526B in bridge mode. My first thought was that the modem was playing up, so I factory reset it and reconfigured it.
I checked my ACLS and didn't see any rules that started or ended at 9:00 am so I just lived with it for a week or so until it got so annoying I contacted my ISP to see if they were resetting anything at 9am.
By accident, I saw that my wireless radio was being enabled aat 9:00am, as it had been for the last 2 years, when I first bought the router. But this problem has only started a few weeks ago.
So I changed the wireless schedule to see if that was really the cause for the reset, and sure enough, whatever time I changed the wireless schedule to, the router rebooted at that time.
I've also factory reset the router; twice; the first time I saved/restored my configuration, the second time I recreated all configuration from scratch.
why enabling the wireless radio resets the router, and why disabling it doesn't, and how to correct this behaviour?
D-Link DCS Network Camera :: 2121 Scheduled Snapshots Not Working?
May 16, 2012So I have bought myself a DCS-2121 with firmware 1.05, 4630. Everything works fine except that the camera does not seem to adhere my settings on the snapshots page. At average, it seems that only one image is sent to my FTP-server regardless of the interval parameters.
View 2 Replies View RelatedD-Link DCS Network Camera :: DCS-2121 - Scheduled Recording Is Not Working
Dec 27, 2010my DCS-2121 :
The scheduled recording or scheduled snapshots is not working. I am running the camera standalone and using the web based configuration, storing the images or avi's on a ftp or samba server.
No matter what i specify, it records when triggered (by motion in my setup). All the other settings like, samba, ftp, video, motion detection, and so on is working fine - but I can't configure it to only record like between 10-16 every day. It records all the time - no matter what I select and what I enter in the schedule scheme.
Linksys Wireless Router :: E3000 Scheduled Access For Kids Devices
Jul 8, 2012 I am running an E3000 with Firmware - 1.0.04.
I would like to schedule my boys ipods to be on the network from 2:00pm to 4:00pm each day.
Running the Cisco connect software it would appear I can schedule from 2pm until the next morning but not a 2 hour window in the same afternoon.
Looking through other posts I see earlier software where this can maintained through the Router firmware but with 1.0.04 I seem to have to use Cisco Connect.
So how can this be done with my current configuration ?
Cisco :: LMS 4.0.1 Won't Allow Device View
Feb 10, 2013when any user logs into LMS #1, GUI says "user not authorized to view devices". All of my users are set to "full permissions" so it seems to be some disconnect here. I'm using ACS for auth, that seems to be working OK. I have a second system LMS#2, setup exactly the same, which works properly, all "full permission" users can access all device menus.
View 1 Replies View RelatedCisco :: View Not Working In LMS 4.2.2?
Oct 10, 2012we have installed a new appliance of LMS 4.2.2 in our VmWare environment. The platform is running licensed to work with 1300 devices. We have approximately 500 devices in DCR, most of them are small switches ranging from Catalyst 2950 to Catalyst 3750, and also a bunch of Nexus 5548 switches.CiscoView is not working for any of them, we get an error message which we cannot interpret. We have updated to the newest possible device packages, but all to no avail.
View 2 Replies View RelatedCisco :: LMS 2.5 Unable To View TOC
Nov 21, 2012We have installed LMS 2.5.We are not able to view TOC(Table of Contents of RME(4.0.3).
View 2 Replies View RelatedCisco :: 2960 - LMS 4.1 View
Oct 15, 2012I am trying to access the cisco view but a message appears notifying me to install the devices packages, i have tried to do an online update from the software center, but it did not work.
the devices that i have are, 2960 switches and 6500 switches and 3560 switches.
View Screen From Other PC
Jul 1, 2012my laptop only has hdmi port and my tv only supports s-video and scart connection but i've an old pc that has s-video connection and i was wondering if i can "send the screen" from my laptop to my old pc via lan is there a way of doing that at high fps? remote desktoping works but it's very slow.
View 2 Replies View RelatedView CCTV Over Net
Nov 8, 2012I have a DVR connected to my router.I have viewed the cctv over the net before using this setup, but I think I need a DNS service so that I can use IE to log in remotely? The free one I signed up to before wants money - I only need it for a few days while i am away
View 3 Replies View RelatedCisco Router :: 2821 How To View Log
Aug 16, 2012want to view the Log on the Cisco 2821 router for any issue occur.
View 2 Replies View RelatedCisco :: View Cached CDP Neighbors In LMS 4.2
Feb 20, 2013view cached CDP neighbor information in LMS 4.2.
In LMS 3.1 it is displayed in the Device Center summary section, but I cant find it in LMS 4.2 Device Center.
Cisco :: LMS 4.1 - WAN Links In Topology View?
Mar 12, 2012The regular problem with the LMS topology and WAN Links when you see the branches are disconnected from the HQ BUT in my case the branches are already connected via Layer2 links but unfortunately some intermediate layer2 modem/switch exist in some branches which prevent CDP discovery but you will find both HQ and branch router in the same subnet .
View 1 Replies View RelatedCisco :: Where Is LMS 4.0 Detailed Device View
Nov 28, 2012How to get the Detailed Device View in LMS 4.0 ? From what I have been able to find out I should be able to go do Monitor> Fault Settings> Setup> Fault Device Details, select a device, click View and then click the device name link.Unfortunately the device name(s) displayed are not links, just text.
I need to get the the Detailed Device View so that I can block certain interfaces/events from generating alarms, specifically ISDNB channels when voice calls are made.
Cisco Routers :: Cannot View LAN Resources?
Apr 23, 2012I can connect via VPN with the QVPN but once I am connected to my network I cannot view the resources available to me by LAN. I am nowhere near aware as to why.
View 4 Replies View RelatedCisco :: Fault View CiscoWorks LMS 4.0.1?
Oct 23, 2011I upgraded the LMS 4.0 with LMS 4.0.1 but now the events are removed of Fault View. The equipments than I am monitoring are: ME-3600, ME-3800 and ASR 9000. This is a configuration problem or I have to update something else?
View 1 Replies View RelatedCan't View Specific Website?
Feb 28, 2011A website that I usually go to has all of a sudden stopped working for me. It is hackforums.net which I know is up because I have been on it outside of my home network. Every computer on my network will not allow me to go on hackforums.net . I have not added it to a firewall or anything. I have even set my router back to factory default and it still won't let me view hackforums.net from inside my network.
View 6 Replies View RelatedCannot View Specific Site
Jul 6, 2011I can't view a specific site from my machine, but can from 2 others on the same network. Tried both IE(8) and FF(4) and still no luck. Running Norton AV and disabled.still no luck. Flushed DNS as well as rebooted. Still no luck. Was able to access at will 3 days ago, but not now.
View 1 Replies View RelatedCan't View Wireless Networks?
Aug 22, 2011I have a Dell inspiron that is about 3 years old. About a month ago I wanted to connect to a wireless network, but there were none visible. I was in a coffee shop where I know there was a strong signal, but nothign showed up. I checked with a friend who was with me, and not only was he connected, he could see 5 other networks in the area - I showed none, even though when I put my mouse over the icon in the lower right of the try, I got a message that there were wireless networks available.Even at home, where it connected automatically, if I clicked on view wireless networks, ny own network that I was connected to wouldn't even show up.
View 19 Replies View RelatedWindows 7 PC To View XP Files?
Mar 30, 2011I want to keep my documents on my XP SP2 machine, but be able to edit them from a windows 7 laptop. Points so far:1. I can print from windows 7 to XP OK.2. Before I re-installed XP this was working fine.3. The workgroups match4. I can see the XP files on the windows 7 machine5. When I click on an XP file on the windows 7 machine, it goes very slowly, then gives a "Not Accessible" error.6. I have not used passwords to set this up.
View 3 Replies View RelatedView Computers In Other (workgroup)?
Feb 2, 2011We have two different groups in network say 'A' and 'B'. My network is B. I can view the computers in my group simply by clicking "view workgroup computers". I wonder how I can view the computers in group 'A'
View 2 Replies View Related