Usually the configuration files are fetched once every week. Lately, the Scheduled Config collection job is failing for all the devices. I have tried to “sync Archive” from LMS 3.2 on some devices but nothing happens. The switches out there are C3750, 2960, 2950, 3550, 3650 and some routers.The server is Win Ser 2003.
[URL]
How can view the scheduled archiving job in lms 3.1 ?
View 1 Replies View RelatedThough other logs are being received through the email.
View 1 Replies View Relatedcreate a scheduled task in LMS. In this task I would like to regularly check time on all network devices in LMS and generate a rapport about this that would be sent to e-mail. All network devices have the same NTP server. How can I create this task? LMS version is 3.2 SP1.
View 4 Replies View RelatedI'm trying out the RV120W wireless router with the latest firmware. I have two APs set up with different schedules. However, the router fails to enable the APs as scheduled and I have to cycle the power to get the APs going again.
View 1 Replies View RelatedI use CiscoWorks LMS 4.0.1.
I planned a discovery of devices for some time, but if I change the parameters of discovery (adding a seed device) in "Discovery Settings Summary", this change does not apply in the scheduled task.
If I change the settings in the scheduled task, the changes do not apply in "Discovery Settings Summary". We must change the settings 2 times.
Friend of mine has a setup out in the sticks, currently with two ISPs: Hughesnet satellite, and a line-of-sight WiFi provider; they're also getting a cel tower within range soon and he's looking at adding an HSPA/LTE connection via that as well.the first gives him a static IP and ridiculous speed and bandwidth at night... but far less speed and a painfully low bandwidth cap during the day (you go over, you pay through the nose).
The second gives lots of bandwidth but poor speeds (difficult to even watch a YouTube video) and a constantly-changing dynamic IP.The third, once implemented, will give him good speeds and decent bandwidth (I believe up to 10GB/mo) but again, will get spendy if he goes over that limit.Right now, I've got him set up with both routers plugged into the same network, multi-homed the NICs on his machines (192.168.0.* for Hughes, 192.168.1.* for LOS) and a little script on each computer that will change the default gateway to let him select which ISP he wants to use... however, it's going to get trickier with a third, and will make it even tougher to keep track of the bandwidth used on each one... especially with multiple computers, a DVR, and two users.
So I'm looking for some way to automate all this... something that will, say, use the HSPA feed most of the time for his whole home network, switch to LOS if it gets near the cap, and switch everything over to the satellite automatically during "unlimited" hours. Again, I'm not opposed to setting up something PC-based with the appropriate software, although for my own sanity, it would really need to be Windows-based (I'm way below n00b with Linux).
I'm trying to schedule a 90 second capture every 20 minutes to coincide with a process I have running. I have created a batch fun to run tshark.exe with the command to stop after 90 seconds, and an output file (-w). This all works, my challenge is that the next time it runs it overwrites the previous file. Is it possible to make tshark timestamp the filename? or is there something clever someone can recommend with a batch file to copy last version somewhere else and rename, so that I can have the process running constantly.
View 3 Replies View RelatedWe're since long having a problem with a DSL internet connection. The connection goes down periodically, for short times, and when performing speed tests, the connection speed varies and is usually lower (0.7 Mbit/s) than what the ISP promises (1.5-2 Mbit/s). Moreover, what modem is being used seems to have an effect.Now, I want to trouble-shoot this and get some hard facts on the behaviour of the connection. I would like to do repeated speed tests over say 24 h or so. They should be done every 3 min or so (to catch short glitches).
My question is: what software tool can I use for this? I have been searching the internet for hours, downloading a handful of applications, without finding anything that I could use. There are loads of applications that log and graph the current upload and download speeds, but that's something else - I need a tool that downloads/uploads files from/to a server, in intervals specified by me (3 min), logging the result and presenting it graphically.
A few weeks ago I noticed that at 9:00am sharp every morning my internet access dropped, and would come back up four minutes later.
The router is connected to a DSL-526B in bridge mode. My first thought was that the modem was playing up, so I factory reset it and reconfigured it.
I checked my ACLS and didn't see any rules that started or ended at 9:00 am so I just lived with it for a week or so until it got so annoying I contacted my ISP to see if they were resetting anything at 9am.
By accident, I saw that my wireless radio was being enabled aat 9:00am, as it had been for the last 2 years, when I first bought the router. But this problem has only started a few weeks ago.
So I changed the wireless schedule to see if that was really the cause for the reset, and sure enough, whatever time I changed the wireless schedule to, the router rebooted at that time.
I've also factory reset the router; twice; the first time I saved/restored my configuration, the second time I recreated all configuration from scratch.
why enabling the wireless radio resets the router, and why disabling it doesn't, and how to correct this behaviour?
So I have bought myself a DCS-2121 with firmware 1.05, 4630. Everything works fine except that the camera does not seem to adhere my settings on the snapshots page. At average, it seems that only one image is sent to my FTP-server regardless of the interval parameters.
View 2 Replies View Relatedmy DCS-2121 :
The scheduled recording or scheduled snapshots is not working. I am running the camera standalone and using the web based configuration, storing the images or avi's on a ftp or samba server.
No matter what i specify, it records when triggered (by motion in my setup). All the other settings like, samba, ftp, video, motion detection, and so on is working fine - but I can't configure it to only record like between 10-16 every day. It records all the time - no matter what I select and what I enter in the schedule scheme.
I am running an E3000 with Firmware - 1.0.04.
I would like to schedule my boys ipods to be on the network from 2:00pm to 4:00pm each day.
Running the Cisco connect software it would appear I can schedule from 2pm until the next morning but not a 2 hour window in the same afternoon.
Looking through other posts I see earlier software where this can maintained through the Router firmware but with 1.0.04 I seem to have to use Cisco Connect.
So how can this be done with my current configuration ?
After launching config collection job in LMS 4.2 I can't get job results and receive error message - Unable to get results of job execution for device. I've increased the job result wait time using option in Admin > Collection Settings ... , but nothing changed.Here are screenshots of error message and wait settings I used.
View 3 Replies View RelatedOur customer is try to make a configuration by web interface menu:
Admin > Collection Settings > Inventory
After select the menu below they always received this message:
Error in starting acquisition: unable to connect to server
i have an issue with the lms 4.2 Topology Data Collection. After installation the Topology Data Collection was running normaly, but since first server reload the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary is "frozen".Is there any option to stop this process elsewhere? I cannot find anything under jobs in running state or so. Clicking on Schedule only give me the option to start data collection, but lms always returns that the process is running.
View 9 Replies View RelatedAfter I upgrading all device packages, inventory collection failure to complete. All devices stuck on pending state and at the end of the job all devices are under not attempted and job result description ses " Timed out. Make shure that ICServer is running". I made sure that ICServer is running.
LMS runs on windows 2008 R2 server
I have Cisco Works LMS 4.0 on Win 2K8 64 bits on VMware EXs. I am facing issue with reference to Inventory Collection, my 10% devices (including Routers & Switches) Inventory collection is failed and give me error (Device sensed, but collection failed). I increase the SNMP timeout 10 sec, 30 sec, 60 sec and even 100 sec the result be the same.
View 1 Replies View RelatedI have a problem with the User Tracking and Data Collection on LMS 4.0.1 . I think It crashes every time or freezes. I Have this error if I lunch UT Acquisition :
Failed to start acquisition: Construction of XML data required for UT IS in progress. Please try After Some Time.When scheduling a CM data collection, I have this error: Data collection IS Already in progress.
I detected an error in ani.log line 12266: Exception in thread "Discovery" java.lang.AbstractMethodError: com. cisco. nm. ani. server. topo. Port Channel.portIfIndex ()
I successfully changed the name of the CiscoWorks server last week with the tool hostnamechange.pl.
Perhaps there was an impact on data collection ?
A customer of mine have 2 VSS systems for wich IC times out during collection when trying to read from flash on them. From the ICserver.log
[ Thu Dec 13 16:45:19 CET 2012 ],WARN ,[Thread-20],com.cisco.nm.rmeng.util.logger.XDILogger,67,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.FlashAGI_CISCO_FLASH_Mib,g$eval,70,com.cisco.nm.xms.xdi.pkgs.S
[Code].....
I'm having an issue with LMS 4 where it's failing to collection configuration from devices.
The following is the status of your Scheduled Config collection job:
Job ID : 1045
Status : Job Failed(111)
Description : System config collection job
[Code]....
I researched through this forum and found a thread where the ConfigMgmtServer server wouldn't run. Looking at the processes it says that this service is running normally.
LMS 4.0.1 installed on Windows Server 2008 R2 Standard with SP1. Created Inventory collection job, but couple of hours later, it is failed with all devices Not Attempted. Increased SNMP timeout on 10 sec, started again for only 1 device - collection failed again. I am attaching pdshow and ICServer file.
View 6 Replies View Relatedwe have installed LMS 3.2 when i try to run data collection it shows "Notified server to run campus data collection", but status of data collection is idle.
If i restart the server and try to run data collection it runs properly one time.
Each time i have to restart the server for data collection.
We have LMS4.0 monitoring 100+ devices. In that collection we have 2 4506e switches. The switches are identical,but one is inventoried successfully and the other always fails.Both have verified their credentials. The 4506e failing inventory is the only device not being inventoried.I looked at other post and increased snmp timeout with no effect.
View 1 Replies View RelatedDoes two separate SCE 2000 devices can share a collection manager, or do they each need a separate CM? If they can share, is there any special setup on the CM itself?
View 0 Replies View RelatedI wanted to ask if there is a collection filter in the ISE similar to ACS 5.3, where I can filter out unwanted syslogs.
View 2 Replies View RelatedI am having a very strange issue on LMS 3.2
The problem is that the syslog collection suddently stops receiving logs and writing them into the syslog.log file
I have checked the following:
- Packet sniff to make sure that logs are being received on the server's NIC interface
- Checked the UDP port 514 is bound to the crmlog process.
- Checked the crmlog is running.
When i restart the server, the syslog connections works for a week or two and save the received logs in the syslog.log file, but after that it suddenly stops collecting log again, all the above points stays valid (service running, UDP Port...)
I have attached the LMS's modules versions installed on the server.
I was trying to add a 2504 to PI, but I keep coming up with this error in Unknown Devices: Collection Status : Unexpected error. [code]
View 4 Replies View RelatedI reinstalled CiscoWorks LMS (Windows 2008 R2) updated th LMS with all availible devicepackages and imported all devices with a xml bulk import of the former installation. Now I am frustrated.... because after the reinstallation LMS has problems collecting the inventory data.The inventory collection for one local device (Cisco WS-C3560-8PC-S) starts and nevers stops.... I have to stop the ICserver to stop the inventory collection.
I have only 4 of nearly 1800 devices where it was possible to collect the inventory information.All the rest is supposed to unreacheable...Reports> Inventory>Management Status>Unreachable Devices.But if I take one of the devices which is reported to be unreacheable and do a device diagnostic (Monitor> Troubleshooting Tools> Troubleshooting Workflows) says it is reacheable...
The inventory does not appear in the "Collector Status"?
Data collection runs forever (since this morning). Also an reboot of the LMS server didnt work. Checked all processes and ani.log -OK. After reboot, the time stemp for Toplogy changed from 8:00 to "Not Available"
Inventory Collection24019 Apr 2012, 12:15 CEST
IdleScheduleConfig Archive24016 Apr 2012, 16:24 CEST
IdleSchedule
i have all of my music/ films on PC running windows 7 (might upgrade to 8) i would like to be able to browse my collection on a tablet (using it as a remote) and be able to play it through my stereo / tv. i would like this done with as few wires as possible none would be best im guessing i will need some from the pc to the stereo and tv
View 1 Replies View RelatedOn our CiscoWorks 2000 installation, running on Solaris with LMS3.2 and RME4.3.1, we noticed a few weeks ago, that the job "Inventory Collection" needs more and more time to finish. At the moment the job execution time is as high as 8 hours, compared to 3 hours before. When we look at the network traffic during job execution, we see after the collection phase (~3h) several hours with no traffic together with a very high CPU load. I mean to remember that this job used to complete around 15 minutes after data collection phase. Restarting the application and rebooting the system didn't work.When we look in to the IC_Server.log, we find devices with a completion time of over 20'000 seconds. Increasing from day to day. [code]
Affected devices are Cisco Nexus 5548P. We tried to delete/add these devices. That works for a few days, then the runtime starts to increase again.
Are we hitting a bug? And is it possible, as a workaround, to exclude devices from only the Inventory Collection?
I have an LMS 3.2.1 server running user tracking collection starting at 11:30am. We also use InterMapper to monitor switches. Right around the time UT collection is running, InterMapper starts to alert about "No SNMPv2c response".
View 1 Replies View Related
