Cisco :: Aironet 1400 Bridge Radio 802.11a Disable
Feb 15, 2012
I have some problem with 802.11A radio is enabled but the detaild status is still display software status is disabled and hardware status is down. I checked the settings on Enable Radio is checked on enable. I can't get any radio accross. whereelse I can check to get this working?
speed basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
power local 18 <<<<<<<<<<< I can't input this line from the command line. I assume that the bridge is taking the MAX setting.
power client 18
packet retries 128
station-role non-root
rts threshold 4000
rts retries 128
concatenation
beacon period 20
infrastructure-client
View 10 Replies
ADVERTISEMENT
Aug 14, 2012
Is the Aironet 1400 bridge FIPS 140-2 compliance? Based on the Release 12.3(8)JA, the Cisco IOS software release 12.3(8)JA is undergoing FIPS 140-2 Level 2 validation. Does it mean it is FIPS 140-2 compliance with this software level to run on Aironet 1400 bridges? [URL]
View 1 Replies
View Related
May 23, 2013
Can we make a bridge connection between cisco aironet 1400 series and cisco R5005? In Root and Non Root Manner.
View 1 Replies
View Related
May 23, 2013
can we make a bridge connection between cisco aironet 1400 series and cisco R5005?
In Root and Non Root Manner.
View 1 Replies
View Related
Sep 24, 2012
We have acquired few AIR-BR1410A-A-K9 AP's that are for US only. I am in Pakistan. For our market, Cisco proposed AIR-BR1410A-E-K9. This is fine as it is listed on their website as well.However, since we also have the "A" model and now the "E" model, can we place an A model on one end and an E model on the other and make them communicate with each other?
View 3 Replies
View Related
Apr 24, 2012
Can I associate the non-root bridge model 1310 to the root bridge model 1400? Is there any problems on the configuration I need to be aware of?
View 7 Replies
View Related
Nov 20, 2012
how to disable radio on the AP 1140 from NCS script .
View 5 Replies
View Related
May 3, 2013
We have a problem with a Cisco 1400 Bridge. This equipment can not bridge to the other root or not root mode. I can see a message "Interface Dot11Radio0 Radio transmit power out of range" and the MAC Address of Dot11Radio0 appears with 0000.0000.0000.I set the local power to 18 but the MAC Address is still in 0000.0000.0000.
View 1 Replies
View Related
Dec 28, 2011
For some time now I have been looking for a good business class wireless AP. I've narrowed it down to the Cisco Aironet 1140 standalone (no controller). I'm no stranger to Cisco products. I've worked with their routers, switches and Pix/ASA firewalls. However, I've not had the opportunity to work with their wireless AP's. Anyone using these AP's (more specifically the 1140 standalone), can provide information on the reliability and security of these devices. Some of the features I would like to have like Radio Mgmt. and Rogue AP Detection I see are only available on the controller based units. Does not having these features on the standalone unit reduce its reliability and security? This is for a small business and the budget does not allow to drop for a controller at this time.
View 7 Replies
View Related
Dec 5, 2012
I have two Cisco Aironet 1252 that I want to configure as a point-2-point bridge. Now I want to know if this configuration supports the 802.11n protocol.
View 2 Replies
View Related
Oct 23, 2012
I want to connect with wireless devices two buildings, one in front of another. Short distance (about 20 meters) and no obstacles. I have a couple of aironet 1242 and i was wondering if it would be possible to setup this link with this equipment.
could WGB be the solution?
View 2 Replies
View Related
Nov 21, 2011
I have a pair of Aironet 1310's I am needing to bridge. I have used the CLI to configure the BVI1 with the ip address and verified it. I then tried to access the GUI to configure the device via Internet Explorer and it would not provide access. I read that it had to be older versions of IE but my OS will not support older versions. I then downloaded Netsace Navigator 7.01 as indicated, but still did not get access.
Then I thought maybe if I can access the GUIvia the IPSU tool but I have Googled the Cisco IPSU and cannot find a downloadable link.
View 3 Replies
View Related
Sep 14, 2011
I've been getting warning messages from the event log of a 1300 series bridge, which is set as an Access Point in the network, states: 'Packet to client (mac address) reached max retries, removing the client'; I'm not sure why the client is removed. Does 'reached max retries' mean that the client has tried to many times to connect to the AP/Bridge?
View 1 Replies
View Related
Apr 9, 2012
I want to connect two buildings. Let's call them Building A (main) and Building B.
„A“ is the main building and provides a wired LAN to an AAA server (192.168.1.2) and the WAN gateway (192.168.1.1). There I placed a 1262N with the IP 192.168.1.3 connected to the wired LAN and configured it as Root-Bridge. Let's call it AP01.
„B“ is a pretty large building and has a wired LAN from one end to the other end.
So I placed two 1262N there, each at one end.
The first 1262N is configured as non-root Bridge (AP02) and connects to the Root Bridge (AP01). The IP address of AP02 is 192.168.1.4.
The second 1262N is configured as Access Point (AP03) and connects to the non-root Bridge (AP02) via the wired LAN. The IP adress of AP03 is 192.168.1.5
My Questions:
1. Do I need tell AP02 about the AAA Server in Building A or acts AP01 like a AAA Proxy for AP02 because of it Root Bridge functionality?
2. How Do I tell AP03 that it should use AP02 as a gateway to building A?
View 2 Replies
View Related
Aug 15, 2011
We are experiencing a high amount of retries in one direction between two 1310 bridges with external yagi antennas. What would this indicate? Here is a copy of the linktest:
POOR (102% retries) Time Strength(dBm) SNR SNR Retries
msec In Out In Out In Out
Sent :5000, Avg 5 - 66 - 64 31 45 Tot: 56 10149
[Code]....
View 2 Replies
View Related
Apr 19, 2011
how far apart an Aironet 1410 Bridge can be from the Power Injector (Dual Coax feeds). I just can't find the specification details. The device comes with a 20' and 50' F-type and I'm looking at 150' runs for both ends of the bridge pair.
View 2 Replies
View Related
Oct 14, 2012
Is any one can configure basic Point-toPoint wireless bridge. I need to connect two simple LAN with Cisco Aironet1310 AP. I required basic configuration with basic authentication between these two devices which is on IOS "123-8.JEA3".
View 16 Replies
View Related
Apr 28, 2012
I am using a GRE-IPSEC tunnel configuration + EIGRP routing protocol and I would like to confirm if I am right with the following:
Due to I am configuring the IP MTU = 1400 in the Tunnel interface, I am avoiding additional fragmentation after GRE encapsulation because there is enough room for IPSEC encapsulation (no matter which mode I am using - I am considering the worst case Tunnel Mode). However, I would like to know what happens if I ALSO include in the Tunnel configuration the command ip tcp adjust-mss 1360 which is clear operates in layer 4 during the 3 way handshaking process to establish the TCP connection/session between opposite hosts (in this case the interaction is with the respective end routers). By adding this MSS command, I understand that I could also eliminate the initial fragmentation of the 1500 bytes LAN packets (before GRE encap) because the hosts are notified to send 1360 bytes packets to the Router and based on the previous, I would be able to transfer packets without "theorical" fragmentation between both ends.
One more question, how can affect if I include this additional command (TCP ADJUST-MSS) the performance (process + memory) of a router 3845 or 7200 without producing for example a entire crash of the device???. I understand that this TCP MSS negotiation is router process intensive but is less than IPSEC encryption/decryption.
View 19 Replies
View Related
Jun 5, 2011
I was assembling and testing some custom production machines here, and I had to perform a data transfer between two windows 7 machines through an HP 1400 switch. I saw 100MBps transfers for the first time. I only wish I could get the main network to operate that fast.
View 13 Replies
View Related
Nov 3, 2012
My friend has a laptop inspiron 1400.... when he tries to connect the internet, message comes up "unable to connect with yellow icon" but yesterday we played online game.
View 2 Replies
View Related
Nov 1, 2011
I have to bridge 1400 series which in the virtual interface has a CRC errors, i don´t the reason, maybe the link (point-point bridge) is misaligned.
View 3 Replies
View Related
Nov 11, 2008
i have re-installed windows xp in my laptop Dell Vostro 1400. it came with Vista but i have formatted and installed registered xp in it. when i installed WiFi driver in it (downloaded form Dell site), the driver works fine but because of this driver my machine gets stuck right after startup (when its shows the desktop). i was thinking that maybe its windows defect but now i came to know that when i uninstall the driver, it dont stuck.. i have tried a lot of drivers from Dell site. specifically for this model.
View 14 Replies
View Related
Sep 11, 2012
Just did a dot11 radio link test on a point to multipoint 1400 series bridges. how to read the results of the test?
View 9 Replies
View Related
Jun 11, 2011
Today after I restarted my laptop (Dell vostro 1400 running windows), I found that I can't open any pages or sites. My wireless utility icon tells me that my laptop is connected to my router, but neither of my browsers (chrome or firefox) will load anything. However, if I turn off my wireless (there's a switch that I can trigger) and try to load a page immediately after turning it back on, then a page will load, though anything after that will not. I'm positive that it's not my router or my internet because my computer and iPod touch connect perfectly fine, it's just my laptop will not.I thought that I might have accidentally gotten malware so I ran malwarebytes in safe mode and it found one Trojan, which I removed afterwards, though I don't remember what it's name or type was. I restarted my laptop afterwards hoping that removing the Trojan would work but I'm still having the same problem.
View 1 Replies
View Related
Jan 5, 2012
I have a Vostro 1400 and my OS is Windows XP. I just bought an Android Smart Phone, my carrier is Sprint.
I have portable ‘Hot Spot’ service. However, I can’t find a wireless program on my computer.
I swapped out my original hard drive after it crashed. I thought that I reloaded everything onto the new one.
View 1 Replies
View Related
Sep 5, 2012
Today I replaced my motherboard to fix the graphics card issue on my Vostro 1400. After installing the motherboard I installed the driver's from Dell's site for the networking card.
I get an error stating device driver/software was not successfully installed. I tried a restore point, that didn't work either. I tried the original driver disc that came with the laptop - same problem.
In device manager it is showing: broadcom netlink adapter fast ethernet #2 - does that mean it thinks I have more than one network card? I'm not sure what to do next. I can't access any wireless from that laptop, not even from a hard wire.
I'm running Windows 7 32 bit.
View 8 Replies
View Related
Oct 1, 2012
I've recently installed a Cisco 2504 WLAN Controller with (5) AIR-LAP1042N-A-K9 Access Points. Everything is working fine as far as the APs connecting to the controller, and clients being able to connect to the WiFi and get network access, etc. The one problem I have is that one AP's b/g/n radio is not active.
If I go to the WLAN Controller management web page, and look at the Access Point Summary, it shows that I have five (5) 802.11 a/n radios active but only four (4) 802.11 b/g/n radios active. I know which AP is affected and clients can indeed connect to that radio using wireless 'B' but not 'N'.I have only one WLAN configured on the 2504 (WLAN ID 1), and one AP group name (default-group) so there are no special groupings of APs. I have been through every page of the Controller management page with a "fine tooth comb" and cannot find any place where I could accidentally be turning off the a/n radio for a single controller.
View 3 Replies
View Related
Apr 19, 2013
The network consists of 133 RAPs/MAPs/1131 APs and all joined the WLC. When I check the 802.11 a/n radio tab, I see only 129 APs and the 802.11 b/g/n tab I see 133 APs. I found out that 4 LAP1131 is not showing in the 802.11 a/n tab. I tried resetting the AP thru the WLC and still the don't see it in the 802.11 a/n tab.
View 7 Replies
View Related
Feb 1, 2012
I've setup the following AP1041N configuration, but for the life of me - the radio will not enable.
++
sho conf
Using 3234 out of 32768 bytes
!
[Code]....
View 10 Replies
View Related
Aug 20, 2011
i have a latitude e6410atg and it says the hardware radio switch is off. if i restart the computer the wifi light comes on but after approximately 5minutes it just shuts off. this continues to happen regardless of how many times i try it.
View 1 Replies
View Related
Nov 26, 2011
Is there anyway to add something to my radio, maybe something to plug into the additional speaker slot, that will allow me to listen to my radio on a bluetooth wireless speaker?
View 7 Replies
View Related
Apr 29, 2011
can i create my own a signal
View 1 Replies
View Related
Jan 4, 2012
How to turn on my hardware radio on?
View 1 Replies
View Related
