Cisco :: Built In RADIUS 2504
Jul 5, 2012
I'm having issue to setup authentication with our external Radius server so I'm thinking whether the 2504 has inbuilt feature which I can configure as a Radius server? if so are there any guide for configuration?
View 1 Replies
ADVERTISEMENT
May 24, 2012
I'm having some weird issues where I cannot ping from the WLC to the IAS RADIUS server. All of my clients cannot connect, but from the switch, router, RADIUS server, and hard wired clients, I can ping to the WLC and RADIUS server. The only thing that cannot ping the RADIUS server is the WLC itself. Nothing in the FW is blocking connectivity. [code]
View 11 Replies
View Related
Mar 6, 2013
Can the 2504 WLC be configured to work with one RADIUS Server for Authentication of Management Users and with a second server for 802.1x EAP-TLS certificate authentication for the end users.
Management Users will authenticate on RADIUS Server 1.Wireless End users will request 802.1x EAP-TLS authentication certificate from AAA server 2.
View 5 Replies
View Related
Jul 12, 2012
I want to know if its nessary to install Certificate authority on your radius server. If we have a CA server already in the domain can we use that for this purpose or we have to install certificate authority on our DC.
View 1 Replies
View Related
Jun 20, 2012
I configured the 2504 with 2 SSIDs for staffs and guests.I also configured the Lobby admin with web auth. But if a guest wants to connect our wireless he/she has to enter the PSK key and then only they are able to connect with the user id and password given by Lobby admin. Can we avoid this key and let the guests connect straightaway with the web auth?I’m planning to configure 802.1x & Radius dual authentication for staffs SSID..
View 5 Replies
View Related
Jun 6, 2013
I have had a replacement router sent out to me due to a fault with the AP.
It had a really old firmware on the AP, which I have updated. Using CCP, I have a wireless network running which is more than I had with the old router.
The issue I have is that there is no gui, just a webpage with a few lines showing commands etc.
I know tha CLI is probably more powerful, but I prefer a GUI.
Looking at the flash of the AP, there seems to be lots of files, which I imagine are part of the gui, so its really just a case of enabling it I would assume.
View 3 Replies
View Related
Dec 26, 2012
how to debug why sometimes the dot11radio0 / 1 go down? Sometimes, the lights on the router indicating the radio status go out. Usually, a reload of the ap will bring them back up...Maybe hardware is starting to fail? Just unsure on how to debug to find out why it turns off sometimes.
View 1 Replies
View Related
Sep 30, 2012
I built a pc asrock z77 pro3 mobo, i5 3570k 3.4ghz, ati 7950, 8gb kingston ddr3 1600mhz ram, corsair 650w psu, a hyper 212 evo and a 500gb hdd with a 128gb ssd all in a cm haf912 case.My problem is that everything works fine except for the inbuilt gigabit lan port. I'm accessing the net through an old pci-e slot network card i found, and I'd really like to use the inbuilt gigabit port. The realtek drivers do not appear under device manager. I installed the latest network drivers from asrock - (Realtek Lan driver ver:7048 for 64-bit win 7), I tried various things I read online like removing the ram for a few minutes, disabling the NIC and sleep mode. I always get this message when installing the driver: "Realtek ethernet cable was not found if deep sleep mode is enabled plug the cable" I've done everything I've read online and from reformatting to removing the ram.In the bios, i made sure the adapter was enabled. another thing is that there is no light coming from the port when the lan cable is inserted into the port. there is a light from the pci adapter so i'm not sure if it's faulty. I've also checked that the cables are fine. I hooked them up to my macbook and ps3 and the network was fine.
View 1 Replies
View Related
Jan 11, 2013
It was my first build, and it's saying I have no network adapters. My motherboard's driver disk did not come with network adapter drivers.
View 18 Replies
View Related
Feb 7, 2011
i m looking for asa 5550 product.Part # ASA5550-BUN-K9 - Cisco ASA 5550 Appliance with SW, HA, 8GE+1FE, 3DES/AES
1) does 5550 contains built in CSC / IPS modules.? why i m asking because the "quick refrence guide " indicates that expansion slots are not available.
2) can asa 5550 natively protects natively against networks attacks against virus / worms etc with out CSC OR IPS MODULE.?
View 9 Replies
View Related
Nov 19, 2012
I am trying to figure out exactly what I need to buy to to connect to an ISP's fiber switch. We need to install a router between the fiber switch and our own core switch to be able to access the IP's allocated to the property. We installed a 1700 with the below config, but we want to purchase a brand new router and we were looking towards possibly the 1921 if the budget allows. Our distributor is telling us that we need to purchase an Ethernet WIC also, but if the router already has 2 ethernet interfaces, why do we need to purchase more hardware? I am a little out of the loop with routers at the moment, so I am not sure if they correct or not, just looking to see if this is the case and if so, why?
interface Ethernet0/0
ip address x.x.x.x 255.255.255.248
full-duplex
!
interface FastEthernet0/0
ip address y.y.y.y 255.255.255.252
speed 100
full-duplex(code)
View 5 Replies
View Related
Jun 27, 2012
This is the first PC I have ever built, but I built it with a buddy who is very experienced and everything went okay. The computer is maybe 3-4 weeks old now, everything is running fine, until today when I decided I wanted to try streaming some Diablo 3.This is when I discovered my upload speed was absolute garbage.I have verizon FIOS - I pay for 15/5, the download speed is always at 20+ mbps, I have never had any problems with it., but my upload speed is fluctuating between .34-1.5 mbps, changing every second.I know this is a problem with the computer because I brought in my old laptop, unplugged the ethernet from my new desktop, plugged it into the laptop in order to keep all variables the same, and it was getting 25/5 without any hesitation.When I was downloading the drivers for my mobo I installed something called Windows Firewall with Advanced Security(maybe that was with a windows update, im not sure).
Specs of my PC (if this matters)
-Asus P8Z77-V LK
-8g ddr3 Ripjaws
-i7 2700k
-Corsair H60
-EVGA GTX 670
-Crucial 128g M4 SSD
-Caviar Blue 1TB HDD
-750W OCZ Modular PSU
View 5 Replies
View Related
Dec 28, 2012
I have no problems when the computer is connected to a router. That's how I'm posting here now. But my router is old and has no QOS. So the sound quality is choppy when I connect the phone to the router. So I tried connecting the phone directly to the cable modem, with the computer using the phone's router for internet. The phone's sound quality is great that way. But then the computer won't connect to the internet.When I hover over the network icon in the systray, it says "Local Area Connection 4 is now connected. Speed: 1.0 Gbps" The phone's router is a gigabit connection. So I think that tells me that the computer is seeing the phone/router and the cables are okay.I just tried to Repair through the network icon. It fails because it can't renew. I checked Window's Event Viewer to see what kind of error that might have created. This is the error:[CODE]
View 16 Replies
View Related
Apr 11, 2011
i deleted my built in wireless connection by accident. how can i restore it
View 1 Replies
View Related
Jun 28, 2011
How to bypass router to modem when the router has a built in modem? So my wireless router has a modem built into it, or is it the other way around: modem with built in router. I'm not sure...But anyway, because I am having such difficulties with the ps3 online, I have been told by many people to try bypassing the router straight to the modem.
View 2 Replies
View Related
Oct 8, 2011
My computer says it has built in Wi-Fi. Do I just need to buy a wireless router or do I need a wireless card? Also my son wants to buy a small laptop. Do I need to let my cable company know I am going wireless? If I have wireless in my home will he be able to connect to internet. New to this wireless thing.
View 1 Replies
View Related
Jun 1, 2012
I have configured a new PC but it does not glowing indicator lights on inserting cable. I tried 10 times using different cables. Installed a fress windows 7 but no lan driver can be found. Later I tried to install Realtek lan driver it gives the error " The realtek network controller was not found. If deep sleep mode is enable please plug in cable".
View 2 Replies
View Related
Apr 29, 2012
Can I connect blu ray player to motorola cable box via Ethernet port? My blu ray player won't work with wifi built-in router.
View 1 Replies
View Related
Dec 13, 2012
Does the Motorola NVG510 have a built-in firewall or do I need security software to provide a firewall?
View 1 Replies
View Related
Jul 1, 2012
I can't connect to the internet via my Lenovo's built in wireless--only wired. It's on, but I still can't see it under 'devices' or from the icon tray.
View 3 Replies
View Related
May 15, 2011
Last night, my internet was working perfectly and I closed my computer lid before going to sleep as usual. This morning, I wake up to use my computer and the internet isn't working. I check the icon at the top and instead of showing an empty wireless meter with an X over it, it shows a computer and a cable with an X over it, which isn't normal. My laptop is an Acer Aspire 5532 with a built in wireless adapter and it has a button near the power button that turns the adapter on and off. I decided to turn it off, give it a while, and turn it on, but that didn't fix it, so I restarted the computer.
Now, when I try to turn it on an off, it gives the wireless symbol with a circled X over it. I have checked the device in Device Manager to see if it is working and it says it is working properly. So I uninstalled it, restarted and the computer automatically installed software like it should, but that didn't fix it. I tried a System Restore, but that didn't work as well. Another thing I should mention is that I have tried rolling back the driver (which didn't fix anything), then I updated it, which also didn't fix anything.
Is there anything else I should try? The only thing Diagnostics can detect is an unplugged cable, but it's built in, so it doesn't require a cable (I've had it for >1 year and this is the first problem I've had).I downloaded Xirrus Wi-Fi Inspector and it says no wireless adapters can be found.
View 1 Replies
View Related
Aug 6, 2011
i just got my xbox 360 with built in wifi and it say connect to xbox live for free but it shows o ther people in my area but thiers is locked
View 1 Replies
View Related
Aug 4, 2012
I'm setting up Blast! Comcast/Xfinity internet (50mb/s) using an SB6120 modem and a linksys E3000 router. I haven't done anything yet, as i haven't received the modem in the mail yet, but i want to be prepared and knowledgeable when it all arrives. Here are my questions I've heard that running this router/modem setup on the N band at 5Ghz provides the best signal strength. How do i configure this? The main goal is to take advantage of as much of the 50mb/s as i can (i know this number is not practical due to overhead estimations etc).My newly built desktop has one free PCI-E slot (the other is occupied by my EVGA GTX 670) and 1 or 2 PCI slots. What's the best option to give my desktop wifi capabilities (pci card or usb adapter) in order to maximize signal strength? I'm about 10 feet away from the router, a door separates the computer from the router.
View 8 Replies
View Related
Oct 7, 2011
I finished building my computer today, installed a fresh os and all the necessary drivers that came with the dvds provided, yet the wireless card doesn't even appear anywhere in the computer. The ethernet cabled one does, but not the wireless. Trying to connect to anything wireless just gives an endless searching process, with no results. I can't test the ethernet either, my router is all the way into the living room, way far out of reach.
Specs:
MB: Asus M4A88TD-V EVO/USB3
GPU: Asus 6870 HD
CPU: AMD Phenom II x4 955
I don't think anything else is necessary, is it?
View 1 Replies
View Related
Nov 26, 2012
I've just finished building a new desktop and the problem is that it cannot connect to the internet. I've got a ethernet cable connected from the modem to the desktop. I know the modem is working properly since my laptop and itouch can connect to the internet wireless. The desktop can recognize the modem and it says it's connected to the modem but it says the modem isn't connected to the internet. I dunno what to do I've got the LAN drive installed all the neccesary requirements for the desktop but it just won't connect
View 2 Replies
View Related
Aug 19, 2011
I have the DIR-655 Rev B with the 2.03NA firmware and am trying to get the dyn dns feature to work. Unfortunately it will not push the IP address to my dyndns account. I have all the correct settings in the panel but still nothing next to the status line.I've double checked all my settings but still no joy.Any way to get dyndns to work?
View 5 Replies
View Related
Apr 3, 2013
I have a Cisco 1801W router, running a DSL connection with wireless connectivity for a school. This is configured on the fastEthernet0 interface on the 192.168.1.0 network (the router is 192.168.1.1).
I was wondering if it is possible to get the built-in switch (fastEthernet 1-8 interfaces) to be used as a part of the same network (192.168.1.0/24).
Fastethernet0 is connected to the school's main switch (24 port), but we could use a few more ports. I'd love to use the 8 ports on the router.
View 1 Replies
View Related
Nov 11, 2011
In Cisco ASA Firewall 5510 does the feature content filter come built in?
View 1 Replies
View Related
Mar 2, 2012
We have 2 Cisco 4400 series WLC and a whole bunch of 1231G APs connected to it.Sometimes the wireless network get really, really slow.Does Cisco have any built in tools for troubleshooting bandwidth or sluggishness issues?And how does one go ahead and troubleshoot something like that?
View 5 Replies
View Related
Feb 9, 2012
I have been working on trying to get an IPAD using the built in VPN client to connect to an ASA5510 version 8.2(5). I have attached the debug from where I have gotten so far. Phase 1 is failing somewhere but the messages aren't real clear or at leat not to me. The ASA is acting as the local CA for the certificate. I inherited the config from another guy as he couldn't get it working and I have made some progress but still not luck in getting the tunnel to just come up. Access to resources will be next but I'd like to just see the ipad show connected.
View 3 Replies
View Related
Apr 10, 2013
Is it possible to configure the RV180W VPN to use IPsec and connect to that VPN using the built in windows vpn client in Windows 7 and 8?I have been testing this but I have not been able to get it to work. What are the settings on the Router to make it compatable with the Windows VPN client?What are the settings I need in the Windows VPN client to allow it to connect to this router?I initially setup the QuickVPN client and that worked, but some of my users can't get it to work and I thought this might be a good alternative to try for those users.
View 8 Replies
View Related
Jun 26, 2012
In Cisco ASA Firewall 5510 does the feature content filter come built in?
View 3 Replies
View Related
Jun 26, 2012
Does ASA 5512-X have a category-based webfilter build-in?
View 1 Replies
View Related