Cisco :: How To Set Up To 851W Router
Oct 24, 2012
I am very new to using the CISCO IOS. Here is the situation: I have a CISCO 851W router in the garage that I want to connect to my Linksys router in the office, which is connected to the internet. The 851W is connected from it's WAN port to Lan port 1 of the Linksys router. Now, currently that ethernet cable is a straight-through cable. Does it have to be crossover? If so, I can fix that.So I have no idea how to give the 851W internet access I am a total CISCO noob. I will leave it to you guys to recommend what IP to assign the router and subnet.
View 9 Replies
ADVERTISEMENT
May 16, 2011
My 851W will not complete the boot up process, here is the output during bootup(c) of the Commercial Computer Software - RestrictedRights clause at FAR sec. 52.227-19 and subparagraph(c) (1) (ii) of the Rights in Technical Data and ComputerSoftware clause at DFARS sec. 252.227-7013. Cisco IOS Software, C850 Software (C850-ADVSECURITYK9-M), Version 12.4(15)T14, RELEASE SOFTWARE (fc2)Technical Support: [URL] Copyright (c) 1986-2010 by Cisco Systems, Inc.Compiled Wed 18-Aug-10 02:37 by prod_rel_teamImage text-base: 0x8002007C, data-base: 0x814ECE54This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
View 3 Replies
View Related
Apr 30, 2013
i want to enable a port 7000 and 514 on my cisco 851w router. using the command-line?
View 1 Replies
View Related
Oct 25, 2012
I have a CISCO 851W router in the garage that I want to connect to my Linksys router in the office, which is connected to the internet.The 851W is connected from it's WAN port to Lan port 1 of the Linksys router. Now, currently that ethernet cable is a straight-through cable. Does it have to be crossover? If so, I can fix that.
I want the default gateway for the CISCO router to be 192.168.2.1. I am not sure how to configure that. [URL]
View 3 Replies
View Related
Jan 31, 2011
I have looked up the command sequence for port mirroring and it seems pretty straight forward however in my case the command will not execute.
I have a 851W with 12.4T
If I do: #monitor session 1 source interface fa 4 (wan port)
i get the response invalid input detected however if I do the same command for fa 1, fa ,2 and fa 3 they work
Using the ? shows the valid entries are [0-4] for fastethernet
I just want to monitor WAN traffic with WireShark, particularly DDNS requests, with a spare PC connected to a free lan port.
I would use a hub on the Wan connection but unfortunately I do not have one at the moment.
View 8 Replies
View Related
Feb 1, 2011
I am trying to configure QoS on my Cisco 851w router using the class-map command.However it won't accept the class-map command.The router is running cisco IOS version 12.4(15)T10 "C850-advsecurityk9-mz.124-15.T10.bin".
View 3 Replies
View Related
Feb 3, 2011
I have looked at the Cisco Feature Navigator and according to the output with IOS 12.4(15)T1 thru T13 there is support for multiple SSID's and the feature "Multiple Basic Service Set ID" should be supported.
When I try to invoke that command mbssid on my Dot11 interface I get 'Invalid' response. Am I missing something here? Is the Feature Navigator misleading me or am I doing something wrong?
All I want to do is broadcast both SSID's that I currently have configured. Currently only one guest mode SSID is allowed and broadcast.
View 2 Replies
View Related
Jun 21, 2011
I bought a Cisco 851W router from a coworker about a year ago and tried setting it up at my home with nothing but headaches. I finally gave up and went with DD-WRT and have yet to look back (my $40 router outperforms this thing on so many levels, but I'm getting off-topic!). I recently re-discovered this beast and pulled it out of storage to see if I could get a test network setup at home to practice on. I checked for any IOS updates and downloaded (and installed) the lastest image (c850-advsecurityk9-mz.124-15.T15.bin). I consoled in and verified the initial 10.10.10.1 IP was configured in the VLAN1 interface and directly connected a PC to one of the switchports and pulled a 10.10.10.2 address. I pull up SDM from my browser (I have used FF, IE, and Chrome, all with the same results. Java version is the latest, 6 Update 26.) and it launches the initial configuration wizard. I go through the steps and get up to the DHCP Configuration (after LAN, before Internet/WAN setup) and try to click Next and nothing happens. It doesn't freeze as I can easily go Back, but can never move forward beyond the DHCP configuration. Pressing Cancel on the wizard just shuts down SDM as a whole and exits.
In my troubleshooting steps, I did notice that as soon as I click Next in the DHCP configuration, nothing will happen in the wizard, but the SDM window in the background will automatically present the "Apply Changes" and "Discard Changes" buttons, which weren't there in the previous steps. Of course, neither of those are clickable due to the wizard being open. I really don't want to configure this thing from scratch using the CLI if I don't have to..is there ANY way I can bypass the SDM Wizard at all? Also, I'm running SDM Express, would downloading ASDM and trying to connect from there make any difference?
View 1 Replies
View Related
Feb 11, 2011
I have been trying to get my 851W to work with DDNS for a long while now. In fact I walked away from the problem in frustration and loaded DD Client on a Linux box until I had time to re-visit this. The folks at Zone Edit were not able to offer much with CLI problems.
When I debug DDHS updates I get to a point where the the router tries to resolve the DDNS update address and fails.So I have a number of questions:
a) Is this error the result of lack of DNS server names written to the config?
b) My WAN interface is a DHCP client to my modem. If the DDNS updater does need to resolve a name, shouldn't the DNS server info be provided by the DHCP process for the WAN interface? How do I ensure that name servers are automatically assigned for the DDNS updater to use?
[Code] ........
View 1 Replies
View Related
Jun 1, 2011
Router A is the main router which Router B tunnels into connect to the location.Router A has a static IP address and Router B has a dynamic I am coming in new on the project so I did not setup this router and I am slightly confused. The tunnel is working however, the sites are not able to share files. Router B would like to be able to see all files on Router A and share printers etc...how the VPN is setup, IP addressing scheme and NAT.
Router A Config
Using 3695 out of 131072 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname XXXXXX!boot-start-markerboot-end-marker!no logging bufferedenable secret 5 XXXXXXXXXenable password 7 XXXXXXXXXX!aaa new-model!!aaa authentication login default localaaa authorization exec default local !!aaa session-id commonno ip dhcp use vrf connectedip dhcp excluded-address 10.0.0.1 10.0.0.99ip dhcp excluded-address 10.0.0.250 10.0.0.254!ip dhcp pool Internal-net import all network 10.0.0.0 255.255.255.0 default-router 10.0.0.254 domain-name XXXXXXXXXX dns-server 199.X.X.X 199.X.X.X lease 4!!ip cefip inspect name MYFW tcpip inspect name MYFW udpno ip domain lookupip domain name XXXXXXXXXX!!!!!username XXXXX privilege 15 password 7 XXXXXXXXXX!! !crypto isakmp policy 1 authentication pre-sharecrypto isakmp key XXXXX address 0.0.0.0 0.0.0.0!!crypto ipsec transform-set 3DES-SHA esp-3des esp-sha-hmac crypto ipsec df-bit clear!crypto ipsec profile vpnprof set transform-set 3DES-SHA !!bridge irb!!!interface Tunnel0 ip address 10.10.10.1 255.255.255.0 no ip redirects ip mtu 1350 ip nhrp authentication donttell ip nhrp map multicast
[code]....
View 2 Replies
View Related
May 4, 2013
I have an e2000 wireless router. I have the latest software version for the Cisco software.I have noticed that Cisco sets up the same password to access the router setup page as the wireless password..Anyone that connects to the main SSID will be able to connect to the setup page at 192.168.1.1...I know that I can change the password in the linksys setup page to whatever I want, but then when I open the Cisco software, it wants me to change the password to match what the administrator password is.Don't they realize that a wireless password is different than the Administrator password to access the router settings?
View 5 Replies
View Related
Jul 27, 2009
I m having 2500 series router. when i boot router automatically get into router(boot)> . how to solve?
View 6 Replies
View Related
Mar 9, 2012
I want to use cisco connect with the Router E1200. There is a wireless connection between laptop and E1200 Router. When I run the "Cisco Connect" after couple minutes searching It can not find the Router and I have to put an (Router name SSID) and password.
View 9 Replies
View Related
Apr 19, 2011
I have managed to get the tunnel up and working and we are sending data via the tunnel from our Cisco VPN router to the Draytek and onto the clients server. (they , the client, have acknowledged that they are recieving and sending packets back to us).But, we never see any returning packets at our VPN tunnel endpoint. When we send I see the encrypted packet count go up , but the packet decrypt remains at zero, this is using show crypto ipsec sa | begin x.x.x.x.
We do have other working VPN solutions, but this is the first connecting to a Draytek. The ACL's are matching, and they have NAT turned off. The routing is fine or else the tunnel would not come up as are all the tunnel parameters, else our packets would not arrive at their server.
View 1 Replies
View Related
Jun 21, 2012
I configured dmvpn at cisco router 2900. one hub router and 3 spokes. all of them are working normally but tomorrow i see one error at at one spoke router.
error:
Maximum Tx Bandwidth limit of 85000 Kbps reached for Crypto functionality with securityk9 technology package license
View 1 Replies
View Related
Apr 4, 2012
i'm currently doing task in this packet tracer, i've already completed 100% but i noticed that there are certain router cant send packet to the main router,i think the best way is to add default route, and i already add default route but it doesnt come out on the routing table,problem : HQ router cant send packet to ISP router?
View 13 Replies
View Related
Dec 28, 2012
I have two mac laptops and am trying to copy a directory with a number of PDFs in it. The files aren't particularly large, but there are many of them. At some point in the process the router stops and must be turned off and on before it will respond again either wirelessly or wired. I have tried the same experiment with both devices wired and the router works fine. I have tried changing the MTU, channel, beacon setting, etc. as other forum posts have tried. I tried reflashing the firmware, resetting to factory defaults and reconfiguring. So far no success. Cisco support wants me to return the router. Frankly I'm at the point of considering the former Linksys/Cisco products complete rubbish. I am going to have to buy a new router even if I return this one since I can't be without a router for any length of time.
View 8 Replies
View Related
Jan 4, 2011
Why there is no parental control feature built in for WAP610N... how do i block website on all computers connected to my router?
View 4 Replies
View Related
Aug 9, 2012
We have a home use WRT160N router linked to a PC desktop and two wireless laptops, Yesterday bought a new I-Phone, but could not link to my network (entered the security key many times). I accidentally connected to computer fix it firm that linked to my PC and wanted a large sum to fix the problem which he said was due to large number of temp?? internet files and once removed he would change the IP address of the desktop computer? Is this diagnosis logical and can I do it on my own. The router is definetely working - both laptops access the internet and I was recently able to hook up a Samsung Blu-Ray player using the same security code I used for the I-Phone.
View 1 Replies
View Related
Mar 18, 2012
Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN?
View 1 Replies
View Related
Mar 5, 2013
The router had firmware 2.0.x(?) and I tried to update to the latest FW, according to the webpage that's
FW_E1000_2.1.02.006_US_20130115.bin
Hardware is E1000 v2 according to sticker on back.The firmware update failed (no reason given) and the router now hangs in limbo where all it does is flashing the power LED.I set my PC to 19?2.168.1.2 and TFTP'd the firmware over to 192.168.1.1 - no errors reported and 192.168.1.1 is pingable. Held reset for 30s, then powered down the router for another 30s. On power-up the router still flashes the power LED.
View 3 Replies
View Related
Jun 26, 2012
I installed an IP camera, and had to change my E1000 router settings to a static IP address. Now I can't access the router settings. 192.168.1.1 is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place. I'm not very good at this stuff, and it's a small miracle that I did it once.
View 4 Replies
View Related
Aug 27, 2008
Can you use your WRT54G router with the newer WRT310N router to extend your wireless signal? How?
View 7 Replies
View Related
Apr 6, 2012
The standard Verizon router doesn't have Wireless N capability, so I got the WRT600N (first floor) a while back and connected it to one of the ports on the Verizon router (basement). I have the wireless turned off on Verizon router. My problem is that anything connecting to the WRT600N has extremely intermittent connectivity.
View 1 Replies
View Related
Jun 20, 2010
I just got E1000 cisco wireless router. Started setup, everything worked fine and replaced admin password with my own. For some reason got error message. tried to redo setup and got message router not recognized. used laptop and found out that wireless works fine. After few days noticed that there is a (mynetworkname) guest connection you can connect without any password. i don't need that stupid thing and my question is how to disable guest network? I cannot reach Main Menu from cd and have no idea where to look for it when i connect to router by web.
View 9 Replies
View Related
Aug 15, 2011
I I use a Linksys E3000 router. Sometimes when I look at the network map I see a device called "Unknown." It appears as though the two notebooks sometime are going through this device to access the Linksys E3000. (I've checked when both notebooks are on and I can determine what devices are connecting directly to the router and what devices are going through this unknown device.) Is there any way to determine what this unknown device is?
View 5 Replies
View Related
Apr 19, 2009
BEFSR81 v3.0.I selecting Enabled UPnP and now I cannot access the router. When I enter the default admin for the password in the Authentication Required screen. I get the following screen: 401 Authorization RequiredThis server could not verify that you are authorized to access. Either you supplied the wrong credentials(e.g., bad password), or your browser doesn't understand how to supply the credentials required.I didn't enter anything new into the username or password fields.
View 5 Replies
View Related
Aug 1, 2011
I currently have my wired cable internet hooked into my wrt310n. I have that hooked into a linksys 10/100 ef3124 switch. From there, I have cat5 run to the back of my house, where the wireless signal is weakest. I've got an E2000 router and would like to hook that in at the back of the house. What settings do I need to make in order to set up a completely new wireless network in the back of the house?
View 1 Replies
View Related
Dec 12, 2011
My main Internet connection is a frontier modem /router It is on the main level of the house. In the basement I am trying to set up the cisco E3000 through an Ethernet cable.
View 4 Replies
View Related
Mar 23, 2011
I have a Thomson TG585 v7 router which is in bridge mode. I also have a NetGear DGND3300v2 router which I would like to connect to the Thomson (eventually I will purchase a switch and connect another device along with the NetGear). The problem is that the NetGear only has 4 LAN ports and no WAN ports, which I assume you would need to set this up.
View 4 Replies
View Related
Mar 20, 2012
I have a Netcomm router which I've had working as my ADSL and my wireless AP.I connected a DLink router via ethernet so as to extend the range of my WIFI.This has worked, but now I cant log in to my DLink router.It started with IP 10.1.1.1After setting it up to not do automatic dhcp and then plugging it in to my Netcomm (which is on 192.168.1) I can no longer find the DLink, whether connected over ethernet or wireless. How it might have had its IP changed as it join the network?
View 14 Replies
View Related
Dec 13, 2012
Unable to access router admin page for Haier model R800
View 1 Replies
View Related
Jan 17, 2012
I have a WRT54GS which works fine with Linux both from both wired and wireless computers using Linux. But I reinstalled Win XP and now I can't reestablish a connection following the EasyLink advisor. I did have a connection under Win XP before.
The last instruction on the Easylink advisor tells me to look for something marked "local" I don't find that word on the screen.
View 2 Replies
View Related
