Cisco :: LMS 4.1 Data Migration From Windows To UNIX OS
Dec 13, 2011
I was using CiscoWorks LMS4.0 on a Windows server 2008 R2. Now I wanted to do an upgrade to the newest LMS 4.1 version and in the same time switch to the new Linux soft appliance. After that I copied all the backup data to the appliance, I launched the "restorebackup.pl" script and unfortunately got the error "The Backup archive is from WINDOWS . But the current OS is UNIX. Restore is not supported across OS." Is there eventually any possibility to however migrate the data to the appliance?? As Cisco is offering the 2 platforms, there should be a possible migration path.
View 1 Replies
ADVERTISEMENT
Aug 16, 2011
Working on Windows desktops and cannot map drives to unix servers without undoing a particular windows update. network policy pushes this update out again. Cannot change that policy....Active Directory Bridge solution needed to map drive letters from windows users to Unix (SUN) systems?
View 1 Replies
View Related
Nov 13, 2011
Are there any methods for statistic data importing from old LMS 3.2 to a new LMS 3.1 version? I know about devices invemtory export/import function, but also i want to save all data gathered from previous time.
View 1 Replies
View Related
Dec 10, 2012
I am working on a migration from Windows based WCS 7.0.164.3 to NCS appliance (1.2.1-once it is available). After stopping WCS, I issued the export userdata C:WCS07Migrate. The process completed, but did not create a single zip file. I found 2 files created in the tmp directory.
One contains multiple a folder called tempDirUserDataFromDb - containing multiple xml files; and another file called ImportExport_ca<number> which contains the maps. Was there something incorrect in my command? Can I use still use these files on NCS? Or do I need to redo the export on the WCS?
View 3 Replies
View Related
Jul 1, 2012
We have to ACS cisco Box running software as 4.2 & 5.2. We want to upload all the data present in 4.2 ACS to 5.2 ACS.
View 6 Replies
View Related
Oct 4, 2011
Can't see this in the documentation, as only Solaris to soft appliance is mentioned, so does anyone know if you can migrate data from LMS 4.0.1 on Windows 2008 to the soft appliance on LMS 4.1?
View 1 Replies
View Related
May 9, 2011
we currently have 4x ACS 4.1 (1) build 23 windows based and we are going to migrate to ACS 5.2 appliance 11211.the first pair we are using simply local authentication for multiple vendor firewall and routers, with one custom radius vendor-specific attributes, with now she exec.the second pair we are using for wireless clients authentication through AD, with dynamic mapping.
in order to migrate what would be the most suitable migration, whether to use Migration utility or export those ACS objects and import them into the new ACS 5.2.
View 1 Replies
View Related
Mar 21, 2011
Veritas Storage Foundation 5.1 for UNIX(STS) ST0-94X exam certification is important for you to get Symantec certified.
View 2 Replies
View Related
Mar 21, 2011
Any relevant doc for ACS4.2 on 1113 platform to be integrated with Unix Directory service having LDAP10.2.0.0 version from Oracle or guidance available.
View 1 Replies
View Related
Jan 18, 2011
I'm having problems in a mixed XP Pro (SP3)/Win 7 Pro (64 bit) network getting the XP machines to access data on the Win7 box. The XP machines are connected wirelessly to a D-Link DSL-2640R router modem and the Win7 machine is connected via an Ethernet cable.
Internet access from all machines works perfectly.The two XP machines can see each other either via mapped drives or My Network Places and can access files.The Win7 PC can access data on both the 2 XP machines.All machines are part of the same Workgroup and the network is set up as 'Office' on the Win7 machine.The XP machines can see the Workgroup, including the Win7 machine after I changed the network type from Home to Office, but can not access the data on it.I assume this is a permissions problem on the Win7 machine. I've made the root directory of the HD in the Win7 machine shareable as \Hppro3125hd via Advanced Sharing/Properties and in the Advanced Sharing tab I have set the permissions for Everyone to Full Control.
There is only one user (Garry) explicitly set up on the Win7 machine. I've tried connecting to the Win7HD via a mapped drive on each of the XP machines by logging on as a different user i.e. matching the user name from the Win7 machine but still no joy.Is there an easy to follow step-by-step guide to lead me through the necessary steps to allow the XP machines to access data on the Win7 box?
View 14 Replies
View Related
Jul 12, 2012
How to connect window server data to website. when i change in server than update website data.
View 1 Replies
View Related
Mar 10, 2012
I should set up a network for a little enterprise.The requirements can be summarized as follows:
- All the "business" softwares have to be stored in a single computer (let's call it "the server"). The other computers (in this case there should be at most 2 or 3 computers) can execute these softwares through the server. So there are no local copies of those softwares on clients, only on the server.
- The main computer (the server) shares also a printer.
- All the computers in the network, are interconnected through a single wi-fi modem/router. Some of them are connected through the wi-fi interface and others through an ethernet cable.
the server, in order to perform some special procedures, has to connect to a special modem which connects it to a remote private network. In order to do so, the server disconnects from the local enterprise network because Windows does not allow me to stay connected to more than one network at the same time.The remote private network does not require to disconnect from any other network, it's just a constraint imposed by Windows.In the meantime, clients are not able to execute softwares anymore and cannot print anything.when the server is connected to the private network, it still needs to execute the "business" softwares.
Is it possible to keep the server connected to both the networks without denying the access to softwares, data and printers to anyone? If yes, how?If not, how can I design the topology of the network in order to share softwares and other data among all the computers (server and clients)? It's important that when the server connects to the private network every computer (including the server itself) can still access softwares, data and printers.
View 1 Replies
View Related
Feb 25, 2013
I have the Mts Mbrowse ZTE AC 8720 data card. it has problem in installing in windows 8 but it works properly in window 7. It has an error fail to install access serial port 0. i didn't understand the error.
View 1 Replies
View Related
Aug 15, 2012
I've valid SAU service contract with WCS. Can I migrate from WCS (7.0.230..0) to latest version of NCS by downloading it from software center or I should purchase some SKU for upgrading to NCS?
View 1 Replies
View Related
May 22, 2012
Is anybody deploying ASA Services Module? I am looking for feedback/gotchas/advice for a migration from an ASA-5550 HA pair.I also received confirmation from Cisco that VPN termination is active in the latest 8.5/8.6 code releases, so hopefully should be able to fully retire my 5550's.
View 4 Replies
View Related
Jun 20, 2011
what options are available to a customer with 800 APs that is finally migrating to a centralised model and therefore migrating from WLSE to WCS? Assuming that they move to v8 of WCS can they upgrade their WLSE licenses to WCS?
View 1 Replies
View Related
May 19, 2013
I have an ACS 5.2 deployment and i want to upgrade it to 5.4 version.I have 2 server in my deplyement:
1/ Primary Server as Authentication server & log collector
2/ Secondary server as Authentication server.
What is the best way to do the migration? Normaly, i can proceed as follows:
1/ Deregidter each server from the deployement ==> Make both the servers standaone
2/ Upgrade the Secondary server.
3/ Upgrade the Primary server (without migrate the log server).
4/ Join Servers to the deployement.
View 11 Replies
View Related
Mar 22, 2011
what is the key point to note for migrating data from ACS 4.0 to ACS 5.0? how can I use Migration utility to migrate data from old version to new version??
I have ACS setup running with 1000 devices and more than 2000 users and 60 groups dont want to build new acs from scratch want to import data from old version?
View 2 Replies
View Related
Jan 14, 2012
I need to upgrade my ACS for windows 4.1.1.23 to 5.2 as we have come across the windows 2008R2 AD problem. Now reading the migration document it says I need to go to at least 4.1.1.24 first which will not be a problem, then I need a migation server, so that means I need another ACS server as the migration server. As I already have 2 ACS servers could I use one of them as the Migration server, ie take it out of production?
View 1 Replies
View Related
Jun 11, 2012
If we need to migrate ACS 4.2 installed on appliance 1113 to ACS 5.3 what all the prerequisites...?
whether any hardware dependencies and the same configurations on 4.2 could be operated on 5.2 even after appliance changes...?
View 1 Replies
View Related
Mar 5, 2013
NCM is going away. It is recommend to move to LMS. We already have a LMS deployment. Currently just used for Monitoring/Performance.Trying to figure out how to get the Configuration change piece that we used NCM for into LMS. Not really having any luck.What I am really wanting to do is configuration archive, device config change notices (when a device config changes I can run report to see who and what was changed), and configuration comparisions (between old and new configs)
View 5 Replies
View Related
Jun 12, 2013
I need to Migrate from ACC 4.1(1) to ACS 5.4, Have configured Network Access Restrictions and Networks Access profiles in ACS 4.1(1), can i go for staright away migration and is the same supported in ACS 5.4
View 5 Replies
View Related
Mar 8, 2011
As we are all aware that the ASA8.3 has quite some changes interms of configuration method.
I would like to know if it is possible to use the pix to Asa conversion tool for 8.3 purpose.
View 2 Replies
View Related
Dec 24, 2011
I'm trying to get all the templates and Maps I've created in WCS into our new NCS. The instructions say just run the export.bat file on WCS and then Migrate into NCS. I cannot find any export.bat file on version 7.0.220.0 of WCS. Is it only available in WCS version 7.0.164.3 ro 7.0.172.0? Do I have to use the export.bat file or can I just do a regular backup and restore?
View 7 Replies
View Related
Nov 28, 2012
A customer is asking to upgrade their LMS 3.0 to Prime 1.1. However, the customer or their previous system's integrator never actually installed LMS 3.0. The licensing and PAK were never used as well. My question is, can I still use the migration top level part # R-PI-1.1-UP-K9 to upgrade LMS 3.0 to Prime 1.1 because there was no licensing ever installed? How would the migration of the current licensing work with the new licensing PAK if that is the case? Or does the customer have to purchase a fresh Prime 1.1 licensing (top level part # R-PI-1.1-K9) because LMS 3.0 was never installed?
View 2 Replies
View Related
Jul 3, 2012
i exported config file from asa5505. i changed this file and i imported in my asa5510. can you tell me that config file allright
View 1 Replies
View Related
May 30, 2012
We have a single 4404 that was setup long before I arrived with Guest networks that timeout and other such tweaks. Is there a document somewhere that shows a way to migrate the old settings to a new 5508 that we are purchasing? By the time the 5508 arrives I will have a very small window to setup the unit before a new wing goes live. I need the new unit as we have reached our limit of licensed AP's on the old 4404. It seems like everyone keeps talking about an easy way but no one says how to do it.
I have never setup one of these units before from scratch so I don't know how long it will take.
View 6 Replies
View Related
Feb 12, 2013
I have old ASA with 8.0 configuration that includes huge number of ACL, NAT , VPNs , we got a new ASA with 8.6 , and we are planning to move the configuration to the new box , I'm wondering what is the best approach to do this , I'm thinking of one of the following scenarios1- downgrade the new ASA to 8.3 , the apply the config , remove the identity nat commands and names then upgrade to 8.6 and after that reconfigure the NAT rules and object groups .2- convert the old config manually to 8.6 code including NAT , object-group ,ACL and apply it to the new ASA ( this is going to be huge task). What are the commands that I have to look at when I convert to 8.6 and will the VPN configuration be affected ?
View 5 Replies
View Related
Apr 9, 2013
WCS 7.0 to Prime Infrastructure 1.2 migration?I am so confused on the migration procedure as I found the documents in Cisco kind of contradictory.Some document said it is required to upgrade WCS to NCS 1.1 before to go to prime infrastructure 1.2.And the other document said WCS can directly upgrade to prime infrastructure 1.2.
View 13 Replies
View Related
Sep 28, 2011
I'm currently working on migration from CSS to ACE. The ACE appliance is running A4(2.0) code. And i couldn't find the CSS to ACE conversion tool in the Web gui.
View 2 Replies
View Related
Jun 27, 2012
my company has the asa 5505 working as the remote access vpn server. my company needs more licenses for vpn than the asa 5505 give it. because of my company purchased the asa 5510. i must migrate configuration from the asa 5505 to the asa 5510. i exported configuration file from asa 5505. i made the changes on them and imported them in the asa 5510. my asa5510 doesn't work. i putted configuration files from asa 5505 and 5510.
View 10 Replies
View Related
Jun 24, 2010
Have upgraded WCS to 7.0 due to a Mesh network feature we needed, but now see I can no longer edit the AP migration templates. The interface allows me to create or delete them but the command dropdown box does not show an Edit option. So now for every AP I want to migrate I need to create a new template before I can select the AP's and migrate them. I still need to migrate about 220 APs....
Looking though the function it tells me to click on the Migration Template name. However neither in MS IE nor Firefox this works, there is no link activated.
View 7 Replies
View Related
May 28, 2012
I have a PIX 515 with version 8.0(3). We buy a ASA 5525-X for replace the PIX.
The question is, what is the better method to migrade the configurations? Manually?
What is the better version for 5525-X? 8.6.1?
View 4 Replies
View Related
