We have a problem with the Layer2 view of the Topology java applet in Cisco Prime LMS 4.2.The Layer2 view shows all the ethernet interfaces links but not the ones in the serial interfaces.All devices have CDP and SNMP (read-only) enabled, and theirs neighbors can be seen with "show cdp neighbors" in both sides of those links.
View 4 RepliesI work with the topology view in LMS 4.1. I can see all the links between the differrent switches (N7K, 3750, 3040).I miss only the links between the different N7K's. This links have one special thinks: they are configured as " rate-mode dedicated force" In the N7K cli this interfaces are displayed with the SN too.
sw-bb13# show cdp ne.The links to sw-bb11 and sw-bb21 are not painted in the topoloyview.
The regular problem with the LMS topology and WAN Links when you see the branches are disconnected from the HQ BUT in my case the branches are already connected via Layer2 links but unfortunately some intermediate layer2 modem/switch exist in some branches which prevent CDP discovery but you will find both HQ and branch router in the same subnet .
View 1 Replies View RelatedI have problem with topology view in LMS 4.2.1, it doesn't show the tunnels connecting branches, though both devices are shown in sh cdp neighbour command output. If I choose Show Devices in Admin > Collection Settings > Data Collection, it is showing cdp neighbours correctly.
View 4 Replies View RelatedUsing Topology I can show device view from all my managed VTP domains. I don't understand why all links are "not in network"!?
View 3 Replies View Relatedim trying to figure out the right way of configuring cdp on devices so that they dont show the links as etherchannels segments linked together, i have several port-channels in the network and the layer 2 view seems all messy.
View 1 Replies View RelatedI wonder if PI 1.3 can draw the topology of the devices which is discovered by prime automatically, or if i can draw it by myself in Prime?
View 4 Replies View RelatedIm having trouble with the topology service. Java is installed, but i cant start the topology service.
View 7 Replies View RelatedI'm using LMS 4.0, after I auto discovery device, I can see all of devices on my network but I cannot view the links connect between the ASR 9000 and Catalyst 6509. I've just checked cdp neighbor on these devices, I can see the full of neighbors.
I attach 2 file, with the visio topology and the topology view on LMS , and I'm 100% sure about the connections between these devices are used. I try to re-discovery many times but it not work correctly.
I am trying to figure out why the Device view has no systlogs in Cisco Prime 4.1.I have everything configured, the switch is sending debugging level logs to the IP of the Prime Server. I am fairly certain it is reporting because it has alot of other information in the server.
View 1 Replies View RelatedI am trying to run Audit reports for config change (Reports > Compliance and Audit > Change Audit > Standard). If I use "Immediate" Run Type a report gets generated with exactly what we need. If I try to use anything else so LMS can generate an email we keep getting this error. I had a look on the forum and supposedly this should be fixed since 3.2.
View 7 Replies View RelatedWe have LMS Prime 4.2. I know how to view the running config on a single device. How do I run a report that will pull all the running configs of all my devices in one report? I'd be able to same them as one big pdf or text file. ]
View 1 Replies View RelatedI have a SR520 router with the ADSL WAN built in. I am looking to ignore the ADSL port and utilise the 4 FA ports to route between two networks.Can I configure the ports on the switch part of the router to become Layer 3 and take there own Ip addresses? If so I can save myself the purchase of a new router.I have used loopbacks before but not sure that will work.
View 9 Replies View RelatedI am trying to implement IP SLA. Can I implement it on layer2 switches?
View 5 Replies View RelatedI understood that service provider will use hardware Alcatel 6850 on the distribution/core and Zyxel 2108G on customer access level.query is that service provider says it's not VPLS which should work most probably through MPLS network of ISP.ISP noted that it would be direct 802.1q VLAN between two sites without any Layer3 on ISP side.
How to:
- understand what kind of connection this will be?
- is this connection is fine for customer?
- identify if this kind of connection will be fine for converge network (voice+data) ?
- what should I ask to ISP to clarify details?
Ive tried to configure NetFlow on layer 2 without success. I configured the recondmonitorexporter like the configuration guide said. but still i dont receive any netflow traffic. I checked the firewall on the VM and it looks fine.
i have done the command under the ethernet interface :" layer2-switch flow monitor TEST input" - for layer2 input.
A Layer 2 switch with IP Address 192.168.1.4 (Vlan0), subnet 255.255.255.0 is physically connected to ADSL Router with IP address 192.168.1.1 (which is also the gateway address for the switch). The problem I have is that all the devices connected to the switch can intercommunicate but are unable to communicate with devices connected to the Router. I guess this may be something to do with how the Vlan is configured on ADSL router?
View 1 Replies View RelatedI am trying to setup 4 cameras to view with remote live view. I set up my server with IP addresses of 192.168.1.80 .... 85. The screen has only the option for 1 video channel. I have seen on-line screen shots that have options for channel 1 through 8. I want to assign each camera to a different channel so I will be able to use remote live view to show all 4 cameras at the same time. I can only show one at a time. Do I need a different version than 3.3 or some obscure windows 7 setting?
View 5 Replies View RelatedI'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
During high throughput times (nightly, when backup runs) we see packet drops on the network. We think it's the ACE module that drops. We use 2 ACE 20-MOD-K9 with base licenses in a FT configuration in Layer2 Mode.Now I found an interesting statistic on the ACE: [code] How to reset this counter?
View 4 Replies View Relatedwhy the WAN protocols like Frame-relay, HDLC and PPP are called Layer2 protocols?What is the address scheme they use?
View 5 Replies View Relatedi have an issue with the lms 4.2 Topology Data Collection. After installation the Topology Data Collection was running normaly, but since first server reload the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary is "frozen".Is there any option to stop this process elsewhere? I cannot find anything under jobs in running state or so. Clicking on Schedule only give me the option to start data collection, but lms always returns that the process is running.
View 9 Replies View Related1)i have problem in LMS 4.2 , he shows most devices not connected to topology sitting lonly even though the have cdp enable , how to force these to join the topology
2)why some devices are shown unreachable , even though i can ping them from lms server and gets reply, also they have community and cdp configured
On a LMS 4.0.1 :I want to know what is the right way to change the telnet program on the campus mgr map (topology services map), when right-clicking a device icon and selecting telnet.I would like to use a tool of mine, and not to launch a telnet command from the IE browser.I changed the default telnet of Windows in the registry, but the program is still launched as a telnet URL in the browser and this is not what I would like to do.
View 2 Replies View Relatedi have only 1 switch 2960 POE at customer enviroment.i did run topology service and checked on the right side POE CAPABLE Devices
it shows me that i have 4 switch POE while actually there is only 1 switch POE in real enviroment.
have ether-channel across 2 switches?i am new in cisco LMS . now i am in client site installing cisco LMS 4.1 in UCS server-rack version. we did it well for the installation, and the LMS working properly until i cannot open topology service.
i attached the error message
I have a customer who wants to disable cdp on all switches for securtity reasons. The same customer has also LMS 4.0 installed.
When disabling cdp, does it affect the topology services on LMS? Can you still see the topology tab on device manager or the topology map of the entire network?
I config the routers with EIGRP and also write Static route between two PC before remove the link between router0 and router1 , destination is reachable , but when remove this connection , packet from pc1 to pc0 will drop in a loop and never reach to destination , is it possible to have a Link state routing protocol and static route at the same network like this scenario , how to prevent loop in this topology static route is configure as bellow :
router0 <==> router 1 <==> router2 <==> router3 <==> router <==>pc1
I am running LMS 4.2 , using that i am monitering some switches . I am using topology services also. In that i am getting veiw of all connected devices with links. But bandwidth utilization is for those links are not showning in topology veiw .
Is there any settings to be done in LMS 4.2.2 or any configuration changes to done on my switches ? to find the traffic flow bandwidth utilization.
I installed LMS 4.0.1 and every module works from the local server. Http login from a remote system, topology services does not start, complains about java version. I followed the link to install the java version, it then complains about some Ansiserver stuff.
the client os is win7 64 bits, eplorer version is 7.
i have a problem that i see the devices by ip not hostname in devices report and topology and i checked in device discovery to appear by hostname
View 2 Replies View RelatedWhen i try to launch topology services in LMS 4.0 i get prompted to install a java plugin. When i install this it tells me to restart the browser but nothing is changed, it asks me if i want to install the java plugin again.
View 7 Replies View Related