Cisco Routers :: RV042 Randomly Blocks Traffic To Internet?
Dec 19, 2011
We have a VOIP system from AT&T with T1 internet access. I have a RV042 setup as the default gateway for the network and the router randomly (usually over the weekend loses the internet). I have updated to the latest firmware and have check all logs on the server. When the internet access goes down we can still access the internal network. I have been power-cycling the router and then everything works fine. Is there a known issue with this router radomly blocking internet access in or out? This device should remain working at all times so that our remote users can access the company network.
View 0 Replies
ADVERTISEMENT
Feb 24, 2013
We have offices in USA and Venezuela.In our USA office we have a RV042 router and in Venezuela we have a RV082 router.We have connected a VPN tunnel (gateway-to-gateway) between both offices.
The point is:How could we redirect the internet traffic from our Venezuela office (RV082) to the USA Office (RV042) to navigate using USA public IP's?
The reason for this is that we need to use online streaming services which are only available for IP's from USA and we can't use them from the Venezuelan IP's.
We can not use the PPTP option since the equipment which will use the streaming services (like hulu, crackle, etc.) in Venezuela is a Google TV device which doesn't allow the configuration of proxy navegation or PPTP VPN connections itself. That's the reason why we need to do that through the routers.
View 1 Replies
View Related
Dec 28, 2012
I wonder if I can have a RV042 VPN Tunnel to a RV082, and in the RV082 block all traffic to the internet that comes form the PCs that are behind the RV042.
Remote PC -> RV042 -> VPN -> RV082 -> RV082 Firewall (block internet traffice, allow intranet traffic)
View 3 Replies
View Related
May 28, 2013
CE IP - 172.18.10.10 /30PE IP - 172.18.10.9/30 I had configured some floating static route on the PE towards CE .The routes were installed correctly till PE - CE link was UP as next hop IP was showing as connected .Now the link has been removed and I am receiving a supernet of 172.16.0.0/12 from PE2 via MPBGP. Although the 1st static route for 10.10.0.0 is showing in routing table, the other 2 ( 172.17.0.0 & 172.24.0.0 ) donot show. I believe that as both the routes and next hop fall under the supernet , the static route is not installing. But I don't know why is this behaviour. I tried to remove the distance 250 from both the routes , but still the static route does not install. I tried this on GNS3 but got the same results .
View 14 Replies
View Related
Dec 2, 2012
We connected to locations to the RV042 by setting up 2 Gateway - to - Gateway VPNs - both locations can communicate with the RV042 and devices within the local LAN of the RV042 - however at the moment it is not possible to send traffic from 1st VPN Location to the 2nd VPN location
View 1 Replies
View Related
Apr 18, 2012
i am using RV042 router, i have configured DMZ in this, DMZ is not passing the traffic, i am able to ping the DMZ ip from the server. but the server is not getting the Internet.
View 1 Replies
View Related
Feb 12, 2012
We have a managed service provider voip network that requires us to use our own router for the data network. We wanted to use the RV042 for it's easy vpn setup. After installing it worked great for about 10 min. then the WAN port stopped passing traffic. 3 min. later it started working again. We tested the RV042 on a different network and it works fine. We tested an older Pix on the managed network and that works fine. But the RV042 will not work on the managed service provider voip network. The service provider says that on their end it shows our WAN port going up and down.
View 1 Replies
View Related
Sep 3, 2012
I'm having some problems blocking IP blocks. I have several blocks of IP's that I want blocked.I want to block 77.0.0.0/8 from communicating with a server on my lan.So I make a rule in the RV042 to deny all traffic from 77.0.0.0 to 77.255.255.255, source wan1, destination lan, my server's ip,As soon as I move that rule above the traffic forwarding rules I have created, no traffic moves in or out via the wan interface. It seems to just cut off all traffic.
View 2 Replies
View Related
Sep 9, 2011
Replaced an older RV042 that had damage from lightning. The new RV042 is V03 with firmware 4.0.0.7. This router supports 7 branch offices using site-to-site VPN to other RV042 routers. After connecting the new RV042 at the main office, three of the branch offices had very slow response over the VPN tunnel. I disabled the firewall on the new RV042 and the problem resolved. The three branches with the problem have Windows 7 systems and the other 4 have Windows XP. I confirmed that the Windows firewall was disabled on the Windows 7 systems.I did try leaving the firewall enabled and disabling SPI, but that didn't work. Have to have firewall disabled to resolve the problem. I would not expect the firewall on the main office RV042 to affect VPN tunnel traffic, but apparently it does. Do we need specific access rules to fix the issue. It works fine with firewall disbaled, but I'd be more comfortable with it enabled.
View 2 Replies
View Related
Jul 31, 2012
I have an RV042 router and I'm looking to monitor the total upstream and downstream traffic from within the router.
I know there is tons of software that I can put on a network computer to monitor traffic, but is there any software that I can put on the router itself that will monitor the traffic from within the router?
View 2 Replies
View Related
Aug 1, 2012
I have an RV042. I understand and have created the services I need. The documentation is just not clear on how to direct traffic for these services to a specific wan port.
Can this even be done with this router? If so, the how? Use rate control or priority? Does checking a wan port mean that it will only go through that port?
View 4 Replies
View Related
Jan 2, 2013
I have a RV042 (firmware 1.3.13.02-tm). Is it possible to configure so traffic from a specific domain (incl. its sub-domains) is directed exclusively to one WAN port?
View 10 Replies
View Related
Dec 10, 2011
I have a Cisco RV042 Wired Router. I've got a static IP and a MS Small Business Server in my Router Network. I have forwarded the essential ports to use the IIS and the Exchange Server of my SBS2011 (https, http, smtp, rpc).
I can use the IIS, if the firewall is activated, but the exchange Server can not receive any emails. I have also created some firewall access rules for the mentioned services but without success.
View 1 Replies
View Related
Sep 13, 2011
I configured ASA5520 and RV042 for site-to-site IPSec VPN tunnel.Tunnel get connected, but no ping, no traffic between both end network.
Network:
=======
192.168.113.0/24----------192.168.113.6 -ASA--------public, static IP address------Cisco 2821--------Internet
192.168.10.0/24-----------192.168.10.1 -RV042-----public, static IP address------Cisco 2821--------Internet
ASA5520 config:
----------------------
name 192.168.10.0 VPN
!
interface GigabitEthernet0/1
nameif NET
security-level 100
ip address 192.168.113.6 255.255.255.0
[code]....
View 5 Replies
View Related
Jul 24, 2011
I am trying to set up my router to grant http traffic a minimum bandwidth of - for example - 5,000 kBit (if there is any http traffic).
So I set http min. rate to 5,000 while I set nntp min. rate to 1 However, when I run nntp downloads on several connections (e.g. 10) my single http download never goes above 1,000 kBit. Without any other connections I reach 8,000 kBit.
I am using a single 12 MBit line.
View 4 Replies
View Related
Dec 10, 2011
I have a Cisco RV042 Wired Router. I've got a static IP and a MS Small Business Server in my Router Network. I have forwarded the essential ports to use the IIS and the Exchange Server of my SBS2011 (HTTPS, HTTP, smtp, rpc). I have also created some access rules for these ports, but I don't have any access on my server services, if the firewall is activated.
Here are my Firewall Access Rules from the RV042 Web Interface:
View 16 Replies
View Related
May 14, 2013
In our company we use ASA 5550 as a VPN server (failover pair, FW 8.2(5)). Long time we used Cisco VPN client (easyVPN) only and some time ago we started to use L2TP/IPsec VPN from Windows clients.From this time we can see strange behavior. Some ip addreses (we use ipv4 only) from local VPN ip pool are getting unusable for clients. When client gets this ip address the traffic from client to intranet is ok but the traffic from intranet to the client is blocked. This behavior affect both L2TP/IPsec and easyVPN clients with this ip address.The packet trace shows that the traffic will be blocked because implicit deny ACL but ACL for the connected user is created:
Phase: 10
Type: ACCESS-LIST
Subtype: vpn-user
Result: DROP
Config:
Additional Information:
[code].....
We use RADIUS for authentication and ACL. Failover to the standby ASA solves the problem but this terminates all L2TP/IPsec VPN connections.We use Cisco Anyconnect VPN too and when Anyconnect client gets this „strange“ ip address he can communicate normally without problems. It looks like that this problem is related to IPsec. how to discover why ASA uses -implicit deny- instead of user ACL?
View 0 Replies
View Related
Feb 24, 2013
In our USA office we have a RV042 router and in Venezuela we have a RV082 router. We have connected a VPN tunnel (gateway-to-gateway) between both offices.
The point is: How could we redirect the internet traffic from our Venezuela office (RV082) to the USA Office (RV042) to navigate using USA public IP's?
The reason for this is that we need to use online streaming services which are only available for IP's from USA and we can't use them from the Venezuelan IP's.
We can not use the PPTP option since the equipment which will use the streaming services (like hulu, crackle, etc.) in Venezuela is a Google TV device which doesn't allow the configuration of proxy navegation or PPTP VPN connections itself. That's the reason why we need to do that through the routers.
View 1 Replies
View Related
Mar 7, 2013
I have an N300 router, and I'm having some connection issues. At least once a day I randomly lose connection. This is frustrating because I like to watch videos online and play games online, and randomly disconnecting right in the middle of a game with other people is not fun.
View 0 Replies
View Related
Jul 9, 2012
I am new to implementing VPN service. What I would like to do is install a RV042 or RV082 (for added speed) and configure it to allow me to access the Internet (from home base) through the VPN from any location while on the road and using my laptop. My questions are: Can this be done? If so, what needs to be done in the configuration to allow gateway access to the Internet? I can't find any reference in the Cicso documents, but somewhere I saw that it can be done. I don't care about accessing anything on the local LAN. As I would be using the same Internet connection for the VPN and the access to get out----how would this affect speed? I plan to use Quick VPN as the client, and haven't even touched the client issue.
View 5 Replies
View Related
Feb 23, 2012
I have 02 router Linksys Rv042 ( 01 old and 01 new ). I'm config router Rv042 new and router connect Internet. But router connect internet very slow. When i using Vigor 2910 connect internet very Fast or using router Rv042 Old connect internet very fast. Two Rv042 the Same. I don't using firewall.
View 4 Replies
View Related
May 2, 2012
I configure my new purchase RV042 router, in Access Rule i Deny all services the source is Lan and destination is WAN. my concern is i want to allow LAN to access internet, so i'ved create another rule which allow http, https. but my problem is i cannot access internet.
View 4 Replies
View Related
Dec 22, 2011
we have 2 thompson HDSL routers connected to the internet. we want to combine them to have higher bandwidth and load balancing so we attached them to a linksys rv042 router. we are running a Xbox applications that require high speed internet streaming.
if the RV042 can combine those 2 high speed internet connections, without disconnecting.
View 1 Replies
View Related
Jan 31, 2012
After upgrading the firmware on my RV042 router to version 1.3.13.02-tm, I am experiencing very slow Internet response on most sites. In some instances, when the page does load, it lacks many graphics. Frequently, I also receive a "server not found"error. In all cases, reloading the page (once it has loaded) results in a complete page display. This is occuring on two MacBook Pros and also on an iPad. The router is a version 1, so no further upgrades are available. I contacted support, but since it is out of warranty, they are unwilling to assist. Prior to the upgrade, everything worked fine, as it has for 5 years.
View 1 Replies
View Related
Feb 12, 2012
I've installed RV042 for a client of mine. For next two months everything worked without any problems. The issue I've been experiencing lately is when I assign a static IP address to the PC it won't have internet access. Once I allow it to have a dynamically assigned IP then it works fine. The IP I assign isn't part of the DHCP range.
View 7 Replies
View Related
Nov 27, 2011
We have RV 042 deployed for internet access/firewall purposes. Due to growing number for Wireless devices and also to separate WLAN traffic from wired devices, we have created a separate VLAN/IP Subnet for the wifi devices. We are having trouble accessing the internet from the WiFi VLAN/IP Subnet. Cisco 3750 is layer 2 and layer 3 device. We have VLAN 1 (10.10.10.0/255.255.255.0), all wired devices and RV 042 are part of VLAN 1. Connectivity to internet from VLAN 1 is good. VLAN 2 (192.168.1.0 / 255.255.255.0) was created for wifi devices, 3750 does the inter-vlan routing, I have enabled the multiple subnet feature on the RV 042 and added 192.168.1.2 / 24 to the subnet list, we still have issues accessing internet from vlan 2 devices.
As a workaround, I shutdown vlan 2 and added 192.168.1.0/24 as secondary address to the VLAN 1 interface on 3750 and i was able to access internet from 192.168.1.0/24 network with wifi devices also on vlan 1, we want wifi devices to be on separate vlan / ip subnet. Looking at the documentation for RV series routers, it talks about supporting multiple subnets access to internet by enabling multiple subnet feature but it doesn't seem to work.Are there restrictions on having multiple vlans?
View 4 Replies
View Related
Jan 10, 2012
Since the change from TeamViewer 6.x to TeamViewer 7.x my router's (WRVS4400N V1.1, latest firmware V1.1.13-ETSI from 2009-02-24 and latest IPS definitions 1.50 from 2011-08-09) IPS blocks its connections to my remotely supported computers claiming a "P2P Vagaa connection attempt - 2". This is not happening with TV 6.x.Who does the error, TeamViewer or Cisco?
View 4 Replies
View Related
Sep 4, 2012
I have a sip gateway connect to the LAN side of RV180 router which has ALG enabled. I have no problem to make and receive calls but sometime I see the router does not forward the 'Bye' message from the VOIP service provider to the sip gateway.
[Code]....
In the capture frame 4292, a 'Bye' message reaches the WAN of RV180 but it never forward the 'Bye' to the sip gateway with internal ip. All settings in RV180 are default with only ALG enabled. I tried to setup Access Rule or Port Forward but none seems to work. Not sure if they are over-ruled by ALG? With ALG enabled, is it possible to have individual Access Rule? If there are conflicts between ALG and Access Rule, which has higher priority?
View 0 Replies
View Related
Jun 16, 2012
anything I put into my hosts file, will not go through the Cisco RV220W router. This is part of the set up:
192.168.1.10 << RV220W
192.168.1. 15 << A client machine
192.168.1.99 << Internal DNS with forwarder to OpenDNS (208.67.222.222 & 208.67.220.220) + a laptop that's not on the internal network at all.
Now, the client machine and the laptop both have an entry in their hosts files:
174.156.12.81 insight.hello.com
From the laptop, I can both browse to insight.hello.com, and I can ping it in Xterm.
From the client machine (192.168.1.15) which is behind the Cisco Router/FW, I can ping insight.hello.com, but I can not browse to it. This is especially strange since the ping goes through the Router every bit as much as the http traffic does, so why is the router giving me a DNS error on that, but the ping goes through just fine?
The hosts file is supposed to supercede any other information from anywhere, so it out to not be a problem for the router either. Yet, it obviously is.
I have tried to disable the internal DNS server as well as OpenDNS and just run the ISP's DNS servers, but no change - I still get that blue DNS error screen from the CIsco router.
Above IP's & hosts are fictitious.
The hosts file doesn't get blocked in a sense, but what happens is that if you have "Content Filtering" checked - even without any rules - the router can not verify that 174.156.12.81 is in fact insight.hello.com in this case, since it doesn't exist in the public DNS system.
So, I unchecked Content Filtering and now it works as it should.
View 1 Replies
View Related
Aug 5, 2011
I am using an RV042 router/firewall -- firmware v1.3.13.02-tm -- connected to a cable modem.I have one public address (WAN1) assigned by my ISP's DHCP server.All my machines on the LAN have static IPs. (RV042 DHCP Server is disabled.)I have set up port (80) forwarding to 192.168.1.101 The HTTP port forwarding does work if an http client on the LAN sends a request to http://<public-ip>:80But I cannot get a response if I send a request to http://<public-ip>:80 from a machine on the WAN.
I did configure Access Rules to allow http traffic (and then tried to allow *all* traffic) between a single IP on the WAN and 192.168.1.101 The incoming log table shows a connection is made from the http client on the internet to the correct http server on the LAN, but there is no resonse from the LAN to the remote client.Is my configuration the problem, or is this feature not supported by the RV042 router? Could my cable modem be blocking outbound traffic?
View 1 Replies
View Related
Jun 25, 2011
My internet connections drop frequently am still able to go on the router website when the internet drops is the router timing me out or what i have a net gear ive tried disabling passphrases?
View 3 Replies
View Related
Jun 6, 2011
I have a two RV042 VPN Router, I successfully connected the IPSEC tunnel. I cannot route Traffic in the tunnel. See the diagram.
MAIN Network
10.252.x.x
-------------->
FIREWALL
a.a.a.1
INTERNET
RV042a WANa <<------------------------------->> WANb RV042b
a.a.a.2 b.b.b.b
In this manner the network of b.b.b.b wil connect to the Main Network 10.252.x.x, unfortunately I can't pass traffic to RV042b going to RV042a. Everytime I trace the route, the traffic goes outside the Internet not to RV042a.
View 1 Replies
View Related
Jan 31, 2012
No problem setting up the FTP server on the router. It's working perfectly from inside the LAN. But any attempt to access the built-in server from the WAN side is fruitless. I found that if I turn off the IP4 SPI on the router, I can suddenly connect to the built-in ftp server without issue from the Internet. If the SPI option is checked, its a no go.
Is this a bug? I can't imagine that it is intentionally set up such that you have to turn off the firewall in order to use the FTP function externally. At least it isn't mentioned anywhere I can find and it wouldn't seem logical.
View 2 Replies
View Related