Cisco Routers :: RV220W - Configuration Pages Not Loading

Aug 25, 2012

With firmware 1.0.4.17 I am have issues with configuration pages not loading and needing to restart the web interface and login again. This is a new problem that started after updating to 1.0.4.17
 
How many months until we can expect a fix?                  

View 3 Replies


ADVERTISEMENT

Pages Not Always Loading?

Apr 8, 2013

I am using a Netgear DG834N modem/router that we moved onto our second phoneline (homeline) that was previously installed on our (now closed down) home office phoneline. We are using the same equipment, provider and provider plan but now we are having major connecting issues. About every second web page will not open. If you refresh, sometimes it will load other times you get the "IE cannot connect to.." This is becoming increasingly frustrating. We run both wireless and hardwired PCs and laptops and use IE, firefox and/or Safari. We run Kaspersky or bitdefender, windows 7 and XP. We can watch re-runs of Tv shows and you-tube no worries. It is the connecting in the first place.

View 5 Replies View Related

Some Web Pages Not Loading While Others Do Just Fine

Sep 11, 2012

I have Imac 21.5 inch 2011 Oct series. with 2.5 GHZ , 8 gig ram.My problem is that for some reasons sometimes I cannot load into simple web pages, I get error message like " Server not found "Firefox can't find the server at [URL]But this website and the others work fine on my laptop which runs vista. I assume it is sort of network problem or a router problem, I've connected Ethernet cable directly to my Imac but still, same situation either with FireFox or Safari.

View 1 Replies View Related

Internet Is Connected But Pages Not Loading

Mar 5, 2012

I'm having problems loading web pages. It's inky on one laptop as other devices and pcs work. The laptop in question is running windows 7 and I haven't made any substantial changes to it as of late. The network centre says I'm connected to the router with full bars. When I use chrome it comes up with a dns lookup failed error, IE7 just says cannot display, when I click diagnose nothing comes up. So far I have changed the dns server addresses to 8.8.8.8 and 8.8.4.4 under internet protocol version 4. This worked until restarting the laptop. I've also typed, under advice, something in the cmd box for dns flush

View 1 Replies View Related

MSI Netbook Is Very Slow On Loading Pages?

Dec 4, 2012

MSI netbook. It used to be very loading pages but now is is very very slow and has been for a month or so.

View 4 Replies View Related

Web Pages Either Don't Load Or Not Stop Loading?

Feb 3, 2013

Since yesterday, nearly every time I load a web page it either doesn't stop loading or sometimes doesn't even load at all. At first I thought that the problem was just with Chrome, but I've since tried Firefox and Explorer and get the same issue. I've tried scanning for viruses, malware and even ran Boostspeed to see if it will solve the problem, but nothing has worked.

I don't know why this has happened all of a sudden, I've not made any significant changes or installed anything new so I'm stumped. I have the fastest fiber optic package my ISP has, so it isn't down to not having enough bandwidth.Can I try resetting my router with the pinhole at the back, or will that cause me to lose settings, which I won't be able to restore ,and not be able to connect to the internet at all? (I know the routers password)

View 1 Replies View Related

Pages Loading Very Slowly - When Connected To Router

Sep 19, 2012

I'm on a wired business network. Some of the machines are Windows 7 and some are XP Pro, but all of us are having issues connecting to web pages, especially pages with lots of pictures. If you refresh it a few times, it may pop up. Some don't ever come up, like weather.com. The server has the same issue, even if you connect it directly to the router.

View 10 Replies View Related

Internet Quits Loading Pages After 5-20 Minutes?

Jul 17, 2012

My computer surfs the internet great for about 5-20 minutes, then it will stop loading pages. I have to restart my computer to get it to start up again. I usually use Google Chrome and when it stops I have checked Internet Explorer to see if it works but it won't load any pages either. I also have checked the connection and it says I'm online. I did the trouble shooting guide for Internet Explorer and that got me no where. I did the ping thing and it checked out that I'm online. It still won't load any pages unless I keep restarting my computer. I have Windows XP and don't know what to do?

View 14 Replies View Related

Linksys Router Pages Only Half Loading?

Nov 18, 2011

I am working on setting up a Linksys router for my Dad. I am moderately competent with networking. Anyway, a glaring, and obnoxious problem I am having is everytime I load a page for the router(192.168.1.1), it does not completely load and I have to hit refresh.Now when I try to change the router settings from DHCP to PPPoE, it reloads the page, for whatever reason, and because this router wants to be irritating, it only half loads the page, so I cannot click the "save settings" button.This is what has been done to the router after being reset(red button on the back held in for 10 sec):I turned on the modem, and plugged directly in to make sure I had internet connection.I plugged the modem's ethernet into the "Internet" port on the wireless router.And finally, I plug an ethernet cable from my computer to the 1st port on the wireless router.Nothing else has been changed. I have not turned on any ridiculous settings. This half-loading router pages is driving me up the wall though. I cannot even troubleshoot the wireless connectivity because I cannot make any changes.

View 7 Replies View Related

Dell :: XPS 8300 - Slow Loading Of Web Pages

Mar 29, 2012

I just bought a XPS 8300, I use Google Chrome for a browser, cable modem internet connection, and quite often, web pages will not load quickly, or will take a couple of reloads to load properly.  Any advice on how to cure this annoying trend of mine?

View 1 Replies View Related

D-Link DAP-1522 :: ADSL Web Pages Not Loading Properly

Feb 17, 2012

I'm connecting to the internet via ADSL. The modem is in our living room and has a DIR-655 connected to it. Also connected are an IPTV set-top box and an Xbox 360. In our office room we have 2 computers and a Buffalo LinkStation hard drive connected by wire to a DAP-1522 which is working as a bridge for the wireless network created by the DIR-655. The reason for this configuration is that the set-top box refused to work with IPTV through the wireless bridge. Before we got IPTV, the bridge was in the living room and was primarily used for Xbox, while the modem was in the office and allowed all desktop PCs to connect by wire.

Ever since we've had the desktop PCs connected via the bridge, surfing has been difficult. Download speeds are good, but very often webpages simply refuse to load. The browser just says "Connecting to [internet address here]. For example, I might log on to Facebook, have the front page load and then I try to open a picture someone has uploaded, but nothing happens. Clicking links, nothing happens. Clicking anywhere, nothing happens. Put a new address in the address bar, nothing happens. It just tries to connect the addresses, but won't.After waiting a while, or restarting the browser, it might work again for a while.

Is it my new modem, the DIR-655 or the DAP-1522? All devices get their IPs from the ADSL modem to ensure proper networking between the devices. Streaming from the NAS to the Xbox is flawless.

View 4 Replies View Related

Cisco WAN :: 871W Home Network Config Pages Not Loading?

Feb 1, 2013

i have a really simple home network setup using the Cisco 871W 4-Port 10/100 Wireless G Router (CISCO871W-G-A-K9). I can't figure out for the life of me what is going on. Web pages seem to "half load" sometimes (netflix, facebook, bank of america doesn't load at all, etc). It doesn't always happen. Sometimes the pages will load fine. I have tested with multiple computers so I know that it is the router itself. Below is my configuration. Ignore anything regarding the wifi. I know that isn't set up correctly. I'll deal with that later. I wanted to see if i was missing anything. Config is really basic. Attached is what one of the "half loading" web pages looks like
 
!
version 12.4
no service pad
service timestamps debug datetime msec

[Code].....

View 3 Replies View Related

Cisco Routers :: WAN / ISP Configuration - RV220w Versus 2951-SEC/K9

Sep 26, 2011

We are planning on testing a new ISP provider in our company but we have the following doubt: This new provider is using a Optical Fiber line (GPON – PT Prime) for this new internet connection and we already have a Cisco RV220W router but they are not sure if that can be used, so they just informed that they a capable router is the Cisco 2951-SEC/K9, that they are selling of course. So our actual doubt is if the Cisco 2951-SEC/K9 can have some “extra” WAN configurations/authentications that are not available in our Cisco RV220W and that can implicate that we cannot use our RV220w router?

View 3 Replies View Related

Cisco Routers :: RV220W - DHCPv6 Prefix Delegation - Editing Configuration File?

Jan 25, 2012

I am trying to configure this router to obtain an IPv6 address from my ISP who offers a dual stack IPv4/IPv6 DHCPv6 Prefix Delegation service.
 
I did a WAN packet capture to see the type of DHCPv6 packets the router sends to the ISP in order to obtain an IPv6 address and I saw that the router is sending DHCPv6 solicitation packets of type IA_NA i.e. for Identity Association for Non-temporary Address. However, most ISPs that offer a dual stack IP4/IPv6 service, they use DHCPv6 Prefix Delegation in which case the router is expected to send DHCPv6 solicitation packets of type IA_PD i.e. for Identity Association for Prefix Delegation.
 
I then downloaded its configuration file and saw the following:
 
dhcpv6c = {}
dhcpv6c[1] = {}
dhcpv6c[1]["renewTime"] = "3600"

[Code].....
 
So, the option for the DHCPv6 client to perform a prefixDelegation request is disabled. Does that mean that if I set this flag to "1" it is going to work? Well, I edited the configuration file and changed this flag but the router refuses to load it! It complains about the file being changed. How does it know that? Is it computing some type of checksum? How can I manually edit this flag and update the router's configuration?

View 2 Replies View Related

Cisco Switches :: SFE2000 Saving And Loading Configuration?

Apr 10, 2011

I have a number of SFE2000 10/100 24 port POE switches. They are configured and running OK. I want to be able to save the configuration and be able to load that saved configuration into another new swich in the case of a failure.
 
I have logged in and gone to Admin-File Management-Save Configuration. I then select the 'Backup' radio button and TFTP the configuration to my TFTP server. All works OK and I have a readable text file with the switch configuration on my TFTP server.
 
I want to be able to restore that saved configuration on to a new switch. I have set the new switch back to factory defaults. I go to  Admin-File Management-Save Configuration. I then select the 'Upgrade' radio button and try and uploade the file into the switch. If load to 'Running Configuration' the switch shows a status of 'Copy Finished' but says 'Copy completed with errors' If load to 'Startup Configuration' the switch shows a status of 'Copy Failed' and says 'Copy completed with errors'
 
I am guessing I should be able to load my saved Configuration back into a switch, shouldn't I??
 
And yes the switches are running the same firmware 3.0.0.17

View 7 Replies View Related

Cisco WAN :: Loading Configuration From Flash Card In 2811 Router?

Jun 6, 2011

have remote routers boot and load a config from the flash card. It seems this is possible if the Flash Class is A, according to the Cisco web site using the
 
boot config flash:<Config file>
 
where <Config file> is the file on the flash.
 
Although this can be applied on 2811 routers, they fail to load the file on the flash card. I've since found that this router type has a Class C flash. So the question is, can either:
 
Is there a similar process for other classes of Flash cards, specifically Class C?
 
or
 
The router flash be set as a Class A to support this functionality,
 
The preferred resolution for this would be the first as there are many remote routers installed a diverse and difficult locations to visit, should a format/rebuild of the flash fail for some reason.
 
don't ask to list the output of a show boot or show bootvar, neither of these commands work. The Startup/Running config lists the boot config line.

View 5 Replies View Related

D-Link DAP-1522 :: Access Configuration Pages Via Wireless

Jan 9, 2012

I have a DAP-1513 unit but there is no section for that unit on the forum.Is is possible to access the configuration pages over the wireless connection.  After setting up access to the main router via WPS, I can access the configuration pages for a few minutes after I "power cycle" the unit.

View 9 Replies View Related

Cisco Application :: ACE 4710 Device Manager ERROR In Loading Configuration

Nov 20, 2012

When trying to view the status in the Monitor tab and the Config tab after you log in to the ACE 4710 Device Manager A5 (1.2) management GUI tool, I could not retrieve the status data and the following message appeared.
 
"Faild to upload Adimn configuration: There is error in loading configuration: Error in loading RMO config from DB:The given index XXXXXXXXX.bak does not match table index definition"
 
Other features include all normal, so I can get information by using the CLI.In addition, this configuration is redundant in the Primary / Secondary, this event occurs only on the Primary.

Other:-XXXXXXXXX.bak is a backup that you created in the checkpoint, and it does not already exist.

-When I'm logged on to the GUI, the above message is displayed in the status bar always.

-It was not recovered by ACE restart it.

-When I try to create the same configuration in a different environment, it did not reproduce.

View 2 Replies View Related

Linksys Wireless Router :: WRT54G No Access After Loading Configuration

May 22, 2012

I have a WRT54G with updated firmware.  Today I saved my configuration to a config.bin file.  When I tried loading the file, the admin screen went blank.  Now I am no longer able to access either the internet or the router's admin page.   Is a hard reset my only option?

View 6 Replies View Related

Linksys Wireless Router :: E4200 / Cannot Access The Twonky Configuration Pages

Dec 27, 2011

By now, I'm sure E4200 and other Router users that have twonky have noticed they cannot access the twonky configuration pages, as you have chosen to block them.  Please give advanced users a work around to this, because if Twonky does not recognize our newer TV/devices, then we cannot play certain file formats without manually configuring the service.

View 3 Replies View Related

Belkin Routers :: N300 F9K1002v3 Not Loading Some Websites

Dec 20, 2012

N300 F9K1002v3 not loading some websites , other websites load just fine.Brand new just arrived yesterday afternoon.I have restarted the router.I have updated the firmware.I have reset the router by holding in the button on the back of the router. When I plug my computer directly into my modem everything works fine.

View 3 Replies View Related

Belkin Routers :: N750DB Maintenance Address Not Loading

Nov 18, 2012

What do I do if I cannot access the setup address IE 198.168.2.1?I use my N750DB as a network booster at home. It runs via ethernet cable from the main router. I used to be able to get on no problem and now, I just can't. I have spent 2 days trying to sort my internet problems.

View 4 Replies View Related

Routers / Switches :: Which Router Can Block Specific Web Pages

Apr 4, 2012

I dont mean a website like facebook.com, but i want it to block an individual page,such as a profile page, yet still be able to access the rest of the site? Again i'm not after facebook settings etc, but i want to restrict access to certain webpages within Lan.

View 2 Replies View Related

Cisco Routers :: WRV210 Administration Pages Not Visible In Internet Explorer

Feb 17, 2012

I recently updated my firmware in my WRV210 router to Version 2.0.1.5 which is the most recent on Cisco's download page. After upgrading the firmware, I found that some of the administration pages do not appear to load correctly in internet explorer version 9.0.5. For example, the ADMINISTRATION -> MANAGEMENT page has data but to see the data, I have to scroll down about 3 pages. All five entries under STATUS do not have any data visible at all which is typical for most of the other administration pages.  An image of the Status Router page is inserted below.   I have logged in to the administration pages with an old version of Firefox 3.0.14 and the pages are visible. The operating system that I am running is Windows 7 64bit.
 
I haven't run across any other entries like on this or other sites. 

View 1 Replies View Related

Belkin Routers :: Slow Loading (or Fail) Router Interface N450 On Win8

Nov 20, 2012

Router interface for N450 DB fails to load/loads slowly/loads partially. I am running Windows 8, and have tried IE10 both from Start Screen and desktop, no luck.

View 4 Replies View Related

Cisco Routers :: RV220W / What Exactly Is QuickVPN

Apr 2, 2012

what exactly is QuickVPN?Is it a IPSec VPN?Is it a PPTP?Is it a SSLVPN?can I resolve my local hostnames? That means, can I configure a lokal DNS Server?

View 3 Replies View Related

Cisco Routers :: RV220W VPN Setup

Aug 24, 2012

I am trying to setup and configure a VPN on the RV220W that uses IPSEC so I can use the Cisco VPN Client I use at work, I have gone through the user manual 11 or 12 times now but still cannot work it out. I cannot find where on the Rv200W iset up the phase 1 authentication username and password which will then lead me onto the phase 2 stage of asking for a username password to allow me access.

View 8 Replies View Related

Cisco Routers :: Static IPs Behind RV220W

Jul 3, 2012

Picked up a pair of RV220W's for a project I'm working on.  I have several IP's available, 4 of which are assigned to/in use by a server behind the RV220W.  All 4 of these IP's are static external IPs.  How I can configure the RV220W so that requests to those 4 IP's get routed to the server.
 
Prior to purchasing this, I was under the impression what I was trying to do was called one-to-one NAT, but after reading the 'Help' document on the one-to-one NAT page, I don't think this is right.  Emphasis added below: Cisco RV220W Wireless-N Network Security Firewall Help FirewallOne-to-One NATOne-to-one NAT is a way to make systems behind a firewall and configured with private IP addresses appear to have public IP addresses.One-to-One-NAT Rule TableThis table lists the list of available One-To-One NAT rules configured by the user. Private Range Begin: start ip address in private (LAN) ip addressPublic Range Begin: start ip address in the public ip address (WAN IP), Public IP Subnet Mask: The Subnet Mask of the public IPRange Length: Range length maps one to one private address to public address up to the given range.Service: This column shows service to be accepted by LAN Host.The actions that can be taken on One-to-One-NAT rules are:(Check Box At First Column Header): Selects all the entries in the table.Add: Opens the One-To-One NAT Configuration page, to add a new entry. Edit: Opens the One-To-One NAT Configuration page, to edit the selected entry.Delete: Deletes the selected entries.
 
So according to their documentation, the server in question would need to be configured with a private IP.  Unfortunately, one of the applications I use is licensed via IP address and my understanding is that I cannot use the software with private/non-routable IP addresses.
 
Is the RV220W capable of not only securing the line (firewall, access rules, content filtering, port trigering & forwarding etc) but also doing what I was hoping to do (keeping the external IP's on the server, and routing appropriately)?

View 9 Replies View Related

Cisco Routers :: Dynamic DNS With RV220W

May 15, 2012

I'm using a RV220W router, and recently got shifted to a dynamic IP solution.Now, I've got a no-ip.org address, but the update service seems to be on no-ip.com. So, I try to enter mydomain.no-ip.org OR mydomain.no-ip.com in the dynamic dns settings, under Host and Domain Name, but when saving the settings it says
 
'The hostname specified does not exist in this user account' ,which seems to indicate that it manages to login to the update service but gets a negative reply.Is it possible to use the RV220W with no-ip.org/com?

View 5 Replies View Related

Cisco Routers :: RV220W Won't Allow Web Access Across VPN

Dec 12, 2012

We have 2 sites connected thru 2 RV220W routers via VPN and most things are working fine. I have noticed however, that any device that has a web interface, i.e. our Sharp Copier and our Freenas server, is inaccessible. The page tries to come up but then I get the Cisco "server is down" page generated by the RV220W.
 
I can pull up the web interface pages if I use a machine on the local LAN but not on any machine across the VPN. The only commonality I can think of is the RV220W blocking that traffic for some reason..

View 8 Replies View Related

Cisco Routers :: RV220W IPsec VPN On Mac OS?

Sep 28, 2011

Cisco support write down manual (workaround), how to setup IPsec VPN connection on Mac OS 1.7?

View 5 Replies View Related

Cisco Routers :: Associate Name To IP - RV220W

Nov 27, 2011

Is there anyway to associate a name to an IP in the RV220W?  I am coming from a WRVS4400N v2.  Folks are complaining that they can't connect, for example via Real VNC, via the PC name any longer.  They have to use the IP address.  In the past I put the names of the PCs in the WRVS4400N when I reserved IPs via MAC addresses (some call this assigning static IPs).  There isn't any place in the RV220W to put the name.  Even when I look at the DHCP list a lot of them show up as "unknown".  I am sure this is a NETBIOS thing but I'd rather fix this in the router as I have always done in the past.

View 4 Replies View Related

Cisco Routers :: RV220W Firmware - Getting 1.0.2.1 Or 1.0.2.3?

Jul 22, 2011

i have a RV220W  and absolutely nothings functional on this stupid Router, no NAT , no Port Forwarding and I cant access my Network from Outside. Any firmware link for downloading. This address works, its handling special webrequest.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved