Cisco Routers :: WRV210 Administration Pages Not Visible In Internet Explorer

Feb 17, 2012

I recently updated my firmware in my WRV210 router to Version 2.0.1.5 which is the most recent on Cisco's download page. After upgrading the firmware, I found that some of the administration pages do not appear to load correctly in internet explorer version 9.0.5. For example, the ADMINISTRATION -> MANAGEMENT page has data but to see the data, I have to scroll down about 3 pages. All five entries under STATUS do not have any data visible at all which is typical for most of the other administration pages.  An image of the Status Router page is inserted below.   I have logged in to the administration pages with an old version of Firefox 3.0.14 and the pages are visible. The operating system that I am running is Windows 7 64bit.
 
I haven't run across any other entries like on this or other sites. 

View 1 Replies


ADVERTISEMENT

Can't Connect To Internet Through Google Chrome Or Explorer / Pages Simply Won't Load

Mar 24, 2011

I can't connect to the internet through Google chrome or explorer, pages simply won't load.

-can't ping the pc from other pc but can ping the modem
- internet shows connected and receiving data
- all connections tight
- internet/wireless modem working fine working fine with my other pc/laptop
- all other programs on the pc seem to work fine
- I have changed no settings on the pc since I last used it and the internet
- I had not used the internet in approx 2 months on the problem pc
- I tried turning off the firewall.
- running XP

View 3 Replies View Related

Dell :: Inspiron 154 / Internet Explorer Will Not Change Highlight Color Settings For Search Pages Viewed

Jun 3, 2012

My Internet Explorer will not save settings/changes to highlight color of viewed pages in search results. It will not highlight search pages that have been viewed at all. I have Internet Explorer 9 & Windows 7 - 32 bit on a Dell Inspiron 1545. I have uninstalled & reinstalled Internet Explorer 9. Above mentioned application did not work on either Internet Explorer 8 or 9. I have cleared all cookies, deleted all temp. internet files, optimized disc space twice & done a Full scan w/ my Norton. I go to color setting under Internet Explorer make the changes & hit each "OK", but the changes don't take. The "Apply" button is recessed and is not functioning. This has been the problem for approximately the last week and 1/2, before that color highlighting function was working. This color highlighting feature of viewed pages does work in Mozilla fire fox, but that is not what I want to use.

View 1 Replies View Related

Servers :: Networking Nas Box Not Visible In Windows Explorer

Nov 28, 2012

I have a small mixed peer-to-peer network comprising 2 Win7 PCs, an iMac and a Win7 laptop and 2 little file servers: a Netgear Stora and a LaCie-2big.Stora is correctly listed under the Network part of Windows Explorer, but LaCie isn't, although I have been able to map a drive to a share on LaCie.No problem accessing files etc.Why would the LaCie not be displayed in the Explorer file tree?

View 2 Replies View Related

Cisco Routers :: Connect WRV210 To Internet?

Aug 24, 2011

I am trying to connect a new Cisco WRV210 Router to the Internet via a D-Link (Yes I Know - you have to work with what you've got) DSL-320B ADSL2+ Ethernet Modem and can't seem to get a connection.

View 5 Replies View Related

Cisco Routers :: RV180 And Internet Explorer 10 Not Compatible

Feb 27, 2013

I am running firmware 1.0.1.9 on an RV180.  After recently upgrading to Microsoft Internet Explorer 10, I notice the RV180 administration screens do not display properly.  Specifically, the horizontal window pane is set so high (not adjustable) all the information is not fully displayed.  If I use a previous version of Internet Explorer I don't have a problem or if I use another browser like Google Chrome I don't have a problem.  So it appears the RV180 and Internet Explorer 10 are not fully compatible.
 
Below is a screenshot using Internet Explorer 10 showing the Status page.  You can see the horizontal window cuts off most of the information and there does not seem to be a way to "pull" it down to display more information.
      
Here is the same Status Dashboard selection via Google Chrome.  Unfortunatly I don't have Internet Explorer 9 still installed, but it worked fine.

View 5 Replies View Related

Cisco Routers :: RV042 Cannot Login To Web Administration After First Logout

Feb 2, 2009

we are using Cisco RV042 router with i guess V3 hardware version, latest driver version (4.2.1.02). We changed the username and password from admin, default, to another name and password. Since then, we are able to log in only once, once the router is restarted. If we leave the page, logout or after several hours after boot, we wont be able to log to web administration again. We enter username, password, submit, the image keeps spinning, but nothing happens.

View 5 Replies View Related

Cisco Routers :: RV220W Remote Administration Not Working

Oct 26, 2011

RV220W is at firmware v1.0.2.4 From: Administration / Management Interface / Web Accesss I have configured remote Management: Remote Management [x] EnabledAccess Type: All IP addressesPort Number: 8888Remote SNTP  [  ] not enabled
 
From within the LAN side I can connect to the router and administer via https://192.168.3.97:8888
 
Status / System Summary reports:WAN (Internet) Information (IP4)
Connection Type: Static
Connection State: Connected
IP Address: 207.180.139.242
NAT:  Enabled
But from the WAN side (using the same Win7 computer) I cannot connect via:  https://207.180.139.242:8888
 
This used to work.   Also not working:  PPTP logins.   ISP is RCN via cable modem, fixed IPs.
 
Have tried power cycling router - no luck. Have tried from PC with AV off and Win7 firewall off

View 5 Replies View Related

Routers / Switches :: Seagate 1 TB HD Not Visible From Belkin?

Jun 18, 2011

Seagate 1 TB HD connected via USB to Belkin double N + wireless router not visible to wireless connected laptop and other devices.I upgraded to latest Belkin firmware.NB The wireless router works for providine common internet access for 4 separate devices on homenetworkNB The wireless router never appears under 'network' in Win 7 file manager.NB I have been unable to get the Belkin storage manager to work at all under Win 7.Have connected External drive to laptop to set to 'share' and rename to something short ("Storage")I reconnected it to wireless router - I then tried to connect (and map) to \192,168.2.1Storage - fail.At this point Win 7 prompts for a network pwd and informs me I must 'enter a pwd to connect to 192.168.etc.' It says the account to use to logon on to the router is laptop/Admin. Which makes no sense. id expect it to list a router account, not the connecting laptop one. There is no option to change the domain.

View 1 Replies View Related

Cisco Routers :: WRV210 - Only 11 Wi-Fi Channels Available

Nov 28, 2011

I have WRV210-E V01 router and there is only 11 (instead of 13) WiFi channels available. Firmware 2.0.1.5. How to get all 13 channels (European ETSI standard)?

View 1 Replies View Related

Belkin Routers :: N600DB / 5Ghz Network Not Visible

Jan 8, 2013

In my new laptop with os windows 8 my 5Hz network is not visable.My 2.4Ghz network is the only one that is showing.

My Router is a Belkin N600DB

Hardware F9K1102 v1
Firmwareversie 1.00.19 (Jul 6 2012)
Versie opstartprocedure v0.07

View 1 Replies View Related

Cisco Routers :: WRV210 - Url Filtering Won't Work

Feb 21, 2011

I have a big problem with my cisco wrv210. I want to use URL Filtering to block facebook.

Enable
ip range : 192.168.2.5-192.168.2.254
url string : Facebook, www.facebook.com , facebook.com notting work.

View 1 Replies View Related

Cisco Routers :: WRV210 - Cannot See LAN After Connecting VPN To Router

Aug 14, 2011

I have a WRV210 Router which I am trying to use VPN remotely to work on my home files while away. I have been able to connect to the router but cannot see any lan network. I have three desktop CPU's 1 W7 and two XP pro operating systems. The one DT I tried stopping fire wall - no lan. I set up an exception in the firewall.  I have tried to get you the info thru clips and file capture of the status of the router.

View 1 Replies View Related

Cisco Routers :: WRV210 Router Just Reboots

Jun 13, 2011

I've began having problems with the WRV210 where the router just reboots.  Sometimes it may go for an hour or more then it slips into a series of reboots.  The up time varies so I see no pattern.  Contacted support they thought the device may have been defective so we did a RMA.  Well guess what?  The replacement arrived on Friday we put it in place and the same thing is happening.  We are not using any of the VPN or VL options.  Just simple PAT to a few internal machines for RDP access and an internal exchange server.  The Qos is all disabled.  It has the newest firmware which I have reflashed.  I'm at a loss to explain the behavior but it doesn't appear to be isolated to a defective device. 

View 13 Replies View Related

Cisco Routers :: Setup VPN On WRV210 As Second Router

Dec 12, 2012

I am attempting to setup a network containing two routers, a primary giving me ADSL internet access (a 3com 3CRWDR101A-75) and a secondary router that has VPN (Cisco WRV210).
 
The primary router has the following LAN settings: 192.168.0.1 / 255.255.255.0 with DHCP enabled. WRV210 has the following LAN settings: 192.168.1.1 / 255.255.255.0 with DHCP enabled. Cable connection is from LAN port of first router to Internet port on second router. In this way, I'm able to get internet browsing on 2 laptops connected to WRV210 I have also a Panasonic IP PBX connected on the second LAN (the WRV210)
 
I need to setup the VPN on WRV210 to be able to get SIP calls from outside of the local networks (through internet). As I am a novice in networking, both routers are on DEFAULT setting.
 
I have learned a lot during the last 7 days to be able to understand the networking concepts but failed to setup the correct configuration.
 
For example if I change WRV210 from gateway mode to Router mode, I will not able to browse the internet despite the Help file that says "Select the mode in which this Router will function. If this Router is hosting your networks connection to the Internet, select Gateway. If another Router exists on your network, select Router. When Router is chosen, Dynamic Routing will be enabled"
 
Also i am able to ping the first LAN 192.168.0.x from WRV210 but not on the other side (from primary router to WRV210).
 
I am confused to use and combine different settings (NAT, Routing, Ports, ...)

View 6 Replies View Related

Networking :: 1 DSL Modem With 2 Routers WRV210

Sep 12, 2011

I got a client who's getting a VOIP system installed into their/my network. The VOIP IT guys are demanding a separate static public IP address to be forward/made available to their router. They will put their phones on a different local subnet.

So here's what I've offered them and they refused:

1. separate PPPOE login; that way we share the modem and each router handles their own session (cleanest solution but they don't want to pay extra)
2. plug their router into DMZ of my WRV210 (they said they require publicly routed IP going direct to their device (but in this case they would have to assign my private IP as their WAN IP and all internet traffic would go to them unfiltered))

View 9 Replies View Related

Cisco Routers :: WRV210 Not Allowing To Delete VPN Client

Sep 27, 2011

I have a WRV210 router that is not allowing me to delete a VPN client that I had perviously set up. When I go to remove this client on the VPNVPN Client ACCESS table the s/w re-directs me to the Status VPN client table. There I cannot flag/check the disconnect box. I have version 2.0.1.5 s/w which is the latest.

View 0 Replies View Related

Cisco Routers :: WRV210 Resets To Factory Defaults?

Sep 23, 2010

I purchased a WRV210. I configure the device, setup all my tunnels, WAN, LAN, Wirelss, Security, etc. and within 48 hours it "automatically" resets itself back to "out of the box" settings. This has happened twice now - once after it ran for about 4 days and the second time after only 5 or so hours of opperation.
 
Is this a known issue with the device? Is there an update I need to apply? I'd give ya my current FW version but I cannot login as it appears to have rest once again lol - and my tunnels are down so no remote access.
 
I made a backup of the config after the first unscheduled reset - (.bin file) so I have my settings ready to restore.

View 6 Replies View Related

Cisco Routers :: WRV210-A V01 Reset To Factory Default?

Oct 30, 2011

I have a WRV210-A V01 (Software: 2.0.1.5) router that when originally purchased I upgraded the firmware to the newest 2.0.1.5. However after the firmware upgrade the router has not worked right since. [I thought maybe the upgrade did not take, and successfully pushed the firmware 3x times]
 
Everytime you login to the webpage the right-side pane you have to scroll down 3x pages until you can see the settings options. It does that for everypage you visit you have to scroll down 3x pages until you can see the settings.
 
The wireless is sporadic and dropping connections, and now certain options like changing the "Basic Rate:" from "All' to "Default" does nothing and wont let you change it.
 
The main issue I have is that certain wireless settings like changing the "AP Isolation:" cause the router to reset back to factory defaults. and even trying to configure the LAN setup also randomly makes the router reset to factory default.

View 1 Replies View Related

Cisco Routers :: WRV210 - No Access To Configuration Menu

Aug 10, 2011

I was configuring a new unit straight out of the box to test a configuration for a client.  I got most of of the configuration done and was noticing the menus were quirky and so I check to firmware and discovered  it was 1.1.16 (* down level).
 
I finished my setup and rebooted to complete the changes, when I went back to log into the console it would Actively refuses to connect . the first time after powering on it shows  the page title as setup before failing 
 
I have tried a hard reset ( 15 Seconds reset) but it does not work . it doesn't even reset the settings.    (static IP  etc still there)
 
how can I get it fixed  / exchanged under warranty

View 1 Replies View Related

Cisco Routers :: Static IP Address For WRV210 Wireless

Nov 6, 2011

I recently switched operating systems from XP to Windows 7. Since that time whenever I need to reboot the router, it does not recognize my printer. How do I set the router to a static ip address and will that affect its recognition of my computer? I have had no problems with computer recognition, only printer.

View 3 Replies View Related

Cisco Routers :: WRV210 Wireless Frequent Disconnections

Feb 18, 2013

- Small Home-Office network based on a Cisco WRV210 VPN Router connected to another WRV210 in a remote location.
- The WRV210 provides 2 WAP-protected SSIDs, one for the office network and one for visitors
- Wireless channel is set 5 channels away of the closest networks (using inSSIDer)
- There are about 12 wireless devices, 4 connected to the office network the rest to visitors. Not all devices are connected at the time of failure. All wireless devices use DHCP which is set to last 1 day and provide 100 IPs.
- The wireless devices are 1 desktop, 3 notebooks (all clean), iPads, iTouch and Nook.
- The failure symptom is that almost daily, and most likely around the same time, no wireless device can connect to any of the SSIDs unless the router is power-cycled. During the failures, which we have witnessed first hand, there are no apparent reasons: no new SSIDs, now SSID in close range on the same channels, nothing we can easily observed in the network in terms of connections or unusual activity.
- A weirdo also presented by the WRV210 was that its web pages were shown erratically. That was corrected by downgrading the firmware from the latest to previous version.
 
We have used a loaner Linksys router WRT54GC with only the visitor Network on it and even though the situation is not as frequent, it has happened already a couple of times.The WRV210 is out of warranty and discontinued, so we get no support from Cisco that is worth paying for.

View 1 Replies View Related

Cisco Routers :: WRV210 Unable To Connect To Router

Sep 26, 2011

I recently purchased a WRV210 router.  I'm trying to set it up and right now I have my server acting as my DHCP server.  I can not change this.  How can I have the WRV210 recoginize this and pick up on this so that computers connected wirelessly to it will receive IP Addresses from my DHCP Server and not from the router?  Right now if I turn all DHCP off, I'm unable to connect to the router. 

View 3 Replies View Related

Cisco Routers :: RV110W Replacement For WRV210 IPsec VPN Tunnel Between Them

Aug 26, 2012

I have a VPN working between two locations using WRV210s at each end. Now I'm looking to replace one 210 with a new RV110W. Can I get the two to work together? The config is quite different.

View 4 Replies View Related

Cisco Routers :: WRV210 - Can't Ping Other Devices On DLink Bridge

Sep 4, 2011

I have a DLink wireless bridge connected to the wireless WRV210 router.   All devices connected to DLink can access internet/email fine and can ping the WRV210, however, they can not ping any device connected to the WRV210 router, nor can any device on the WRV210 ping devices on the DLink writeless bridge.  All devices are on the same subnet, 192,168.100.X  with mask 255.255.255.0.  All devices get their address from the WRV210.

View 7 Replies View Related

Cisco Routers :: WRV210 Freezes / Hanging / Lock / VPN Don't Reconnect

Dec 21, 2010

I'm using two WRV210 Linksys Cisco Routers to create a tunnel between two places with a pppoe adsl internet connection.I made several tests with new 2.xxx and old 1.7xx firmware, and nothing changes.Try to reset to factory defaults, and nothing changes.I have two problems:
 
1) The router crashes after a time working, usualy around 24 hours, sometimes more, sometimes less. The lights still flashing, but nothing happens, no VPN traffic and no ping response from the router, and of course, no internet access. I could see just that the router works a bit hot, but, I think that is normal.
 
2) The VPN IPSEC was configured, and both configurations are identical. All value are the same, I am using the dyndns service. So, the VPN quickly connects and I can ping and access remote computers. Windows Folders, VNC, IT'S REALLY WORKS FULL. WORKS REALLY FINE. PERFECT.
 
BUT, when the router crashes, as I've told on problem 01, after remove the power cord and insert ir again, the VPN don't reconnect.On log's, I could see that it's say that has no preshared key. [code] But, it worked before. Nothing changes, nothing, the router just restarts. No configuration was lost, (I checked the VPN IPSEC TAB), but says that have no preshared key,The unique way to restablish the connection is go on the VPN IPSEC TAB, and change symetrical any configuration, as change MAIN MODE to AGGRESSIVE on both routers.So, now are as MAIN. Tomorow probably it will crash, so, I will have to restart both routers, and change to AGGRESSIVE. So, when it happens again, i will have to back to MAIN.

View 19 Replies View Related

Cisco Routers :: WRV210 Router - Can't Change Static WAN Subnet To 240

Sep 20, 2011

In the Internet Setup area (WAN) when I change to Static IP I can't change the Subnet Mask from 255.255.255.0 to 255.255.255.240 which is the information currently in my D-Link router.  When I try to save the changes I get the error "The IP address is not in the right subnet".  I find it hard to believe that a lowly D-Link $35 router has nore capability then a Ciso Small Business Router. 

View 1 Replies View Related

Cisco Routers :: Can't Access Remotely WRV210 - Website Does Not Load?

Nov 22, 2011

I have configured a router WRV210 and I left it enabled in order to access it remotely, but I can not connect to it. I have checked the settings and everything is fine, but if I try to access it from anywhere in the website does not load, either IE or Firefox or Chrome.

View 7 Replies View Related

Cisco Routers :: WRV210 - Quickvpn Disconnects - Remote Gateway Not Responding

Oct 2, 2012

We have 2 remote locations that are connecting to a server at our home location.  Each remote computer uses quickvpn utility to establish a vpn with the home location.  Our problem is that sometimes the vpn disconnects while we are working in remote desktop on server 2008.  Luckily our sessions in remote desktop stay put but we lose the vpn connection.  Most of the time we get a message that the remote gateway is not responding.  Our dsl internet connection seems to work and we have previously had no trouble with connecting to the home location.  We have 3 computers that connect simultaneously to the server at each remote location and sometimes one computer will stay connected while others disconnect. 

View 3 Replies View Related

Cisco Wireless :: WRV210 - Can't Connect Vpn To The Internet

Aug 20, 2012

just trying to set up my Signal Booster VPN WRV210 -- no connection to the internet happens when I connect it all like the the Quick Start Guide tells me to connect first my AT&T DSL modem to the power, then the new VPN router, then the PC with a hard wire ethernet connection.

View 1 Replies View Related

Laptop Connected To Internet But Internet Explorer Cannot Display Webpages

Oct 2, 2012

Laptop connected to internet but internet explorer cannot display webpages

View 1 Replies View Related

Can't Connect To Internet - Internet Explorer Cannot Display Webpage

Feb 27, 2011

I suddenly can't connect to the internet using IE or Firefox every time I try I get the message "Internet Explorer cannot display the webpage". My connection on my wireless picks up great and shows signal strength as excellent. I took it to a place that was offering free check ups and they said that I caught a virus which I never seen any sign of catching a virus when it worked and that it had wiped out one of my hard drives and they could fix it for $229.00. I don't have that kind of money so I don't know what to do.

View 1 Replies View Related

No Connectivity For Any App Other Than Internet Explorer?

Jan 9, 2011

No connectivity for any application other than Internet Explorer.Can not update any applications. Can not sign in to any apps, such as Paltalk, AIM, etc.Internet Explorer runs fine.

Computer Specs:

-Compaq Evo N800c
-Windows XP SP3
-Pentium 4 - M 2.0ghz 1.99ghz
-512MB RAM

Computer was bought refurbished and I believe XP had been re-installed and I am not sure if all the factory divers were properly re-installed...

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved