Cisco Routers :: WRV210 - Only 11 Wi-Fi Channels Available
Nov 28, 2011I have WRV210-E V01 router and there is only 11 (instead of 13) WiFi channels available. Firmware 2.0.1.5. How to get all 13 channels (European ETSI standard)?
View 1 Replies
ADVERTISEMENT
Cisco Routers :: WRV210 - Url Filtering Won't Work
Feb 21, 2011I have a big problem with my cisco wrv210. I want to use URL Filtering to block facebook.
Enable
ip range : 192.168.2.5-192.168.2.254
url string : Facebook, www.facebook.com , facebook.com notting work.
Cisco Routers :: Connect WRV210 To Internet?
Aug 24, 2011I am trying to connect a new Cisco WRV210 Router to the Internet via a D-Link (Yes I Know - you have to work with what you've got) DSL-320B ADSL2+ Ethernet Modem and can't seem to get a connection.
View 5 Replies View RelatedCisco Routers :: WRV210 - Cannot See LAN After Connecting VPN To Router
Aug 14, 2011I have a WRV210 Router which I am trying to use VPN remotely to work on my home files while away. I have been able to connect to the router but cannot see any lan network. I have three desktop CPU's 1 W7 and two XP pro operating systems. The one DT I tried stopping fire wall - no lan. I set up an exception in the firewall. I have tried to get you the info thru clips and file capture of the status of the router.
View 1 Replies View RelatedCisco Routers :: WRV210 Router Just Reboots
Jun 13, 2011I've began having problems with the WRV210 where the router just reboots. Sometimes it may go for an hour or more then it slips into a series of reboots. The up time varies so I see no pattern. Contacted support they thought the device may have been defective so we did a RMA. Well guess what? The replacement arrived on Friday we put it in place and the same thing is happening. We are not using any of the VPN or VL options. Just simple PAT to a few internal machines for RDP access and an internal exchange server. The Qos is all disabled. It has the newest firmware which I have reflashed. I'm at a loss to explain the behavior but it doesn't appear to be isolated to a defective device.
View 13 Replies View RelatedCisco Routers :: Setup VPN On WRV210 As Second Router
Dec 12, 2012I am attempting to setup a network containing two routers, a primary giving me ADSL internet access (a 3com 3CRWDR101A-75) and a secondary router that has VPN (Cisco WRV210).
The primary router has the following LAN settings: 192.168.0.1 / 255.255.255.0 with DHCP enabled. WRV210 has the following LAN settings: 192.168.1.1 / 255.255.255.0 with DHCP enabled. Cable connection is from LAN port of first router to Internet port on second router. In this way, I'm able to get internet browsing on 2 laptops connected to WRV210 I have also a Panasonic IP PBX connected on the second LAN (the WRV210)
I need to setup the VPN on WRV210 to be able to get SIP calls from outside of the local networks (through internet). As I am a novice in networking, both routers are on DEFAULT setting.
I have learned a lot during the last 7 days to be able to understand the networking concepts but failed to setup the correct configuration.
For example if I change WRV210 from gateway mode to Router mode, I will not able to browse the internet despite the Help file that says "Select the mode in which this Router will function. If this Router is hosting your networks connection to the Internet, select Gateway. If another Router exists on your network, select Router. When Router is chosen, Dynamic Routing will be enabled"
Also i am able to ping the first LAN 192.168.0.x from WRV210 but not on the other side (from primary router to WRV210).
I am confused to use and combine different settings (NAT, Routing, Ports, ...)
Networking :: 1 DSL Modem With 2 Routers WRV210
Sep 12, 2011I got a client who's getting a VOIP system installed into their/my network. The VOIP IT guys are demanding a separate static public IP address to be forward/made available to their router. They will put their phones on a different local subnet.
So here's what I've offered them and they refused:
1. separate PPPOE login; that way we share the modem and each router handles their own session (cleanest solution but they don't want to pay extra)
2. plug their router into DMZ of my WRV210 (they said they require publicly routed IP going direct to their device (but in this case they would have to assign my private IP as their WAN IP and all internet traffic would go to them unfiltered))
Routers / Switches :: How To Connect Two Dvr 4 Channels Each
Feb 25, 2011I have two dvr 4 channel each and I need to connect them to just one static IP, is that possible?
View 1 Replies View RelatedCisco Routers :: WRV210 Not Allowing To Delete VPN Client
Sep 27, 2011I have a WRV210 router that is not allowing me to delete a VPN client that I had perviously set up. When I go to remove this client on the VPNVPN Client ACCESS table the s/w re-directs me to the Status VPN client table. There I cannot flag/check the disconnect box. I have version 2.0.1.5 s/w which is the latest.
View 0 Replies View RelatedCisco Routers :: WRV210 Resets To Factory Defaults?
Sep 23, 2010I purchased a WRV210. I configure the device, setup all my tunnels, WAN, LAN, Wirelss, Security, etc. and within 48 hours it "automatically" resets itself back to "out of the box" settings. This has happened twice now - once after it ran for about 4 days and the second time after only 5 or so hours of opperation.
Is this a known issue with the device? Is there an update I need to apply? I'd give ya my current FW version but I cannot login as it appears to have rest once again lol - and my tunnels are down so no remote access.
I made a backup of the config after the first unscheduled reset - (.bin file) so I have my settings ready to restore.
Cisco Routers :: WRV210-A V01 Reset To Factory Default?
Oct 30, 2011I have a WRV210-A V01 (Software: 2.0.1.5) router that when originally purchased I upgraded the firmware to the newest 2.0.1.5. However after the firmware upgrade the router has not worked right since. [I thought maybe the upgrade did not take, and successfully pushed the firmware 3x times]
Everytime you login to the webpage the right-side pane you have to scroll down 3x pages until you can see the settings options. It does that for everypage you visit you have to scroll down 3x pages until you can see the settings.
The wireless is sporadic and dropping connections, and now certain options like changing the "Basic Rate:" from "All' to "Default" does nothing and wont let you change it.
The main issue I have is that certain wireless settings like changing the "AP Isolation:" cause the router to reset back to factory defaults. and even trying to configure the LAN setup also randomly makes the router reset to factory default.
Cisco Routers :: WRV210 - No Access To Configuration Menu
Aug 10, 2011I was configuring a new unit straight out of the box to test a configuration for a client. I got most of of the configuration done and was noticing the menus were quirky and so I check to firmware and discovered it was 1.1.16 (* down level).
I finished my setup and rebooted to complete the changes, when I went back to log into the console it would Actively refuses to connect . the first time after powering on it shows the page title as setup before failing
I have tried a hard reset ( 15 Seconds reset) but it does not work . it doesn't even reset the settings. (static IP etc still there)
how can I get it fixed / exchanged under warranty
Cisco Routers :: Static IP Address For WRV210 Wireless
Nov 6, 2011I recently switched operating systems from XP to Windows 7. Since that time whenever I need to reboot the router, it does not recognize my printer. How do I set the router to a static ip address and will that affect its recognition of my computer? I have had no problems with computer recognition, only printer.
View 3 Replies View RelatedCisco Routers :: WRV210 Wireless Frequent Disconnections
Feb 18, 2013- Small Home-Office network based on a Cisco WRV210 VPN Router connected to another WRV210 in a remote location.
- The WRV210 provides 2 WAP-protected SSIDs, one for the office network and one for visitors
- Wireless channel is set 5 channels away of the closest networks (using inSSIDer)
- There are about 12 wireless devices, 4 connected to the office network the rest to visitors. Not all devices are connected at the time of failure. All wireless devices use DHCP which is set to last 1 day and provide 100 IPs.
- The wireless devices are 1 desktop, 3 notebooks (all clean), iPads, iTouch and Nook.
- The failure symptom is that almost daily, and most likely around the same time, no wireless device can connect to any of the SSIDs unless the router is power-cycled. During the failures, which we have witnessed first hand, there are no apparent reasons: no new SSIDs, now SSID in close range on the same channels, nothing we can easily observed in the network in terms of connections or unusual activity.
- A weirdo also presented by the WRV210 was that its web pages were shown erratically. That was corrected by downgrading the firmware from the latest to previous version.
We have used a loaner Linksys router WRT54GC with only the visitor Network on it and even though the situation is not as frequent, it has happened already a couple of times.The WRV210 is out of warranty and discontinued, so we get no support from Cisco that is worth paying for.
Cisco Routers :: WRV210 Unable To Connect To Router
Sep 26, 2011I recently purchased a WRV210 router. I'm trying to set it up and right now I have my server acting as my DHCP server. I can not change this. How can I have the WRV210 recoginize this and pick up on this so that computers connected wirelessly to it will receive IP Addresses from my DHCP Server and not from the router? Right now if I turn all DHCP off, I'm unable to connect to the router.
View 3 Replies View RelatedCisco Routers :: RV110W Replacement For WRV210 IPsec VPN Tunnel Between Them
Aug 26, 2012I have a VPN working between two locations using WRV210s at each end. Now I'm looking to replace one 210 with a new RV110W. Can I get the two to work together? The config is quite different.
View 4 Replies View RelatedCisco Routers :: WRV210 - Can't Ping Other Devices On DLink Bridge
Sep 4, 2011I have a DLink wireless bridge connected to the wireless WRV210 router. All devices connected to DLink can access internet/email fine and can ping the WRV210, however, they can not ping any device connected to the WRV210 router, nor can any device on the WRV210 ping devices on the DLink writeless bridge. All devices are on the same subnet, 192,168.100.X with mask 255.255.255.0. All devices get their address from the WRV210.
View 7 Replies View RelatedCisco Routers :: WRV210 Freezes / Hanging / Lock / VPN Don't Reconnect
Dec 21, 2010I'm using two WRV210 Linksys Cisco Routers to create a tunnel between two places with a pppoe adsl internet connection.I made several tests with new 2.xxx and old 1.7xx firmware, and nothing changes.Try to reset to factory defaults, and nothing changes.I have two problems:
1) The router crashes after a time working, usualy around 24 hours, sometimes more, sometimes less. The lights still flashing, but nothing happens, no VPN traffic and no ping response from the router, and of course, no internet access. I could see just that the router works a bit hot, but, I think that is normal.
2) The VPN IPSEC was configured, and both configurations are identical. All value are the same, I am using the dyndns service. So, the VPN quickly connects and I can ping and access remote computers. Windows Folders, VNC, IT'S REALLY WORKS FULL. WORKS REALLY FINE. PERFECT.
BUT, when the router crashes, as I've told on problem 01, after remove the power cord and insert ir again, the VPN don't reconnect.On log's, I could see that it's say that has no preshared key. [code] But, it worked before. Nothing changes, nothing, the router just restarts. No configuration was lost, (I checked the VPN IPSEC TAB), but says that have no preshared key,The unique way to restablish the connection is go on the VPN IPSEC TAB, and change symetrical any configuration, as change MAIN MODE to AGGRESSIVE on both routers.So, now are as MAIN. Tomorow probably it will crash, so, I will have to restart both routers, and change to AGGRESSIVE. So, when it happens again, i will have to back to MAIN.
Cisco Routers :: WRV210 Router - Can't Change Static WAN Subnet To 240
Sep 20, 2011In the Internet Setup area (WAN) when I change to Static IP I can't change the Subnet Mask from 255.255.255.0 to 255.255.255.240 which is the information currently in my D-Link router. When I try to save the changes I get the error "The IP address is not in the right subnet". I find it hard to believe that a lowly D-Link $35 router has nore capability then a Ciso Small Business Router.
View 1 Replies View RelatedCisco Routers :: Can't Access Remotely WRV210 - Website Does Not Load?
Nov 22, 2011I have configured a router WRV210 and I left it enabled in order to access it remotely, but I can not connect to it. I have checked the settings and everything is fine, but if I try to access it from anywhere in the website does not load, either IE or Firefox or Chrome.
View 7 Replies View RelatedCisco Routers :: WRV210 Administration Pages Not Visible In Internet Explorer
Feb 17, 2012I recently updated my firmware in my WRV210 router to Version 2.0.1.5 which is the most recent on Cisco's download page. After upgrading the firmware, I found that some of the administration pages do not appear to load correctly in internet explorer version 9.0.5. For example, the ADMINISTRATION -> MANAGEMENT page has data but to see the data, I have to scroll down about 3 pages. All five entries under STATUS do not have any data visible at all which is typical for most of the other administration pages. An image of the Status Router page is inserted below. I have logged in to the administration pages with an old version of Firefox 3.0.14 and the pages are visible. The operating system that I am running is Windows 7 64bit.
I haven't run across any other entries like on this or other sites.
Cisco Routers :: WRV210 - Quickvpn Disconnects - Remote Gateway Not Responding
Oct 2, 2012We have 2 remote locations that are connecting to a server at our home location. Each remote computer uses quickvpn utility to establish a vpn with the home location. Our problem is that sometimes the vpn disconnects while we are working in remote desktop on server 2008. Luckily our sessions in remote desktop stay put but we lose the vpn connection. Most of the time we get a message that the remote gateway is not responding. Our dsl internet connection seems to work and we have previously had no trouble with connecting to the home location. We have 3 computers that connect simultaneously to the server at each remote location and sometimes one computer will stay connected while others disconnect.
View 3 Replies View RelatedCisco Wireless :: Can't Set 1552 To Use 802.11a 40 MHz Channels
Apr 22, 2012I am testing a Cisco 1552 and cannot seem to set it to use the 40 MHz channels. In the controller GUI is is set to use 40 MHz channels under DCA for 802.11a but when I go into the CLI and show the config of the AP it shows the channel width to be 20 MHz. If I try to change the channel width through the CLI I get "radio is not disable or ap not set to customize" or something like that. The radio is disabled globally and locally. Is there a way to set the AP or radio to a "customize" mode?
What prompted this was I was testing the throughput on it and can only get a 130 mbps data rate connection to it. The data sheet says it will support 300 mbps with the 40 mhz channel so I was trying to test it atteh higher rate.The HW is a Cisco 4402 with 7.0.230 software on it, 1552E.
Cisco Wireless :: 5508 - Not All 5 GHz Channels Being Used
Sep 30, 2012I've got a deployment of 1142N APs using a pair of 5508 controllers running 7.3.101.0. We're in the United States and the country is set to "US". I've added the UNII-2 channels to Auto-RF on the controllers via "config advanced 802.11a channel add 100" and so forth. According to the output of "
show advanced 802.11a channel", I've enabled every 5 GHz channel that's legal for use in the US:
802.11a 5 GHz Auto-RF Channel List
Allowed Channel List......................... 36,40,44,48,52,56,60,64,100, 104,108,112,116,132,136,140, 149,153,157,161,165
My confusion comes because the automatic assignment of 5 GHz channels is heavily biased toward just a few of them, with most of the available space being ignored. Here are the 5 GHz channel assignments from a large, single-story building with 31 APs:
(qty 2) 36
(qty 6) 40
(qty 5) 44
[ code].....
A total of nine channels are used (two of them only once) while twelve other channels are ignored completely. Many of these APs are close enough to hear one another, so assigning seven of them to ch. 48 makes no sense.
Looking at my campus as a whole, I've got numerous APs using channels 36, 40, 44, 48, 149, 153, 157, 161, and 165. I've got at least one each using channels 52, 56, 60, 64, 112, 116, and 132. Nothing at all is on 100, 104, 108, 136, and 140. I am using 20 MHz wide channels, between, so all are independent.
Can anyone shed light on A) why my distribution is so heavily skewed toward the first nine channels, and B) how I can learn whether certain channels are being avoided due to the presence of radar, etc, on the frequency? I'd like to take full advantage of 5 GHz by having as little channel re-use as possible.
Cisco Wireless :: Damaged Firmware On WRV210?
May 9, 2009I purchased two linksys wrv210 routers and the firmware seems to be damaged. The dhcp server for the router is not working and even if i configure a static ip address on my notebook. I still can access the router via the web interface. I have already tried to reset the router to its default settings via the reset button but that proved to be useless. Can the firmware be reloaded via tftp?
View 7 Replies View RelatedCisco Wireless :: Connect Wrv210 With Ezxs88w
Aug 31, 2010I try to connect those part : 1 WRV210 and 1 EZXS88W.Both of them work fine. But, i can not see it on the network, even in wrv210 management console.I plug the cable in port 1 of wrv210 and then in "uplink" of ezxs88w. In the managment console, it's say "Port 1 Disabled".Is there any way to change this configuration ?
View 1 Replies View RelatedCisco VPN :: WRV210 / Configuring VPN To A FortiGate Router?
Sep 28, 2011I'm having trouble configuring a vpn between a CISCO WRV210 and a FortiGate router.
View 1 Replies View RelatedCisco Wireless :: WRV210 - Can't Connect Vpn To The Internet
Aug 20, 2012just trying to set up my Signal Booster VPN WRV210 -- no connection to the internet happens when I connect it all like the the Quick Start Guide tells me to connect first my AT&T DSL modem to the power, then the new VPN router, then the PC with a hard wire ethernet connection.
View 1 Replies View RelatedCisco Wireless :: WRV210 - Why Connection Lost So Often
Nov 1, 2012I'm looking for support on why I'm always loosing my internet conection due to my WRV210 Router.
This is being used in a business, and it has the most up to date Firmware, I'm also using a spliter hub which was making things work better, but now it seems about every second day I have to unplug the router only and my connection is back..
Get A ISDN Modem With At Least 4 Channels?
Aug 12, 2011Where you get get a modern ISDN modem with at least 4 channels? I am 2 miles from Cable and .5 miles from dsl.ISDN is the only option cause I play games online. Would 256K or 128K Up and Down be enough for playing FPS games on xbox live? I cant find any ISDN modems that are new. Only used ones on ebay that I dont know would work on windows 7.
View 1 Replies View RelatedCisco WAN :: WRV210 Not Work With SMB Series SG 100 16 Ports Switch
Jan 19, 2011I connect a WRV210 router with Small Business 100 Series Unmanaged Switch SG 100-16 Switch. But the switch is not work with the router.In the port of switch (connect with router), no light. In router, the port is disable.Do I need cross-over ethernet cable connect with them?I tried connect WRV210 directly to computer, that is work. I tried connect WRV210 to other (no name) switch and connect this switch with Cisco Switch 100-16 switch than they are work. why?
View 1 Replies View RelatedCisco VPN :: Configure Access On WRV210 Wireless-G Router
Jun 23, 2011I need to configure a vpn on a Cisco WRV210 Wireless-G VPN Router - RangeBooster, i have five users that are going to connect to a file server. the file server access is all set i just need a step by step document to configure the vpn screens on the router.
View 1 Replies View RelatedCisco Wireless :: Cannot Even Connect To WRV210 To Begin Setup
Oct 12, 2010I purchased an WRV210 to set up as a wireless access point on our office network, to replace an older competitor's unit. Since we already have DHCP on the network, I've elected to attempt to configure this device using my own laptop. Here are the steps I've taken, which is approximately the same steps as the pamphlet lays out:
1) connect my laptop to one of the four ethernet ports on the back of the router
2) power up the router (I've disabled my wireless on my laptop, btw)
3) open a browser and type "192.168.1.1"
nothing comes up. It cannot connect.
So I pulled up a command prompt and pinged 192.168.1.1. No answer.
So, then I pulled up the ethernet adapter configuration, and set the adapter to the following:
IP address: 192.168.1.31Subnet Mask: 255.255.255.0 Default gateway: (left blank)
still no response from the unit. So then I assigned the default gateway to the address of the router, 192.168.1.1. Still no response.