Cisco Routers :: WRV210 - Url Filtering Won't Work

Feb 21, 2011

I have a big problem with my cisco wrv210. I want to use URL Filtering to block facebook.

Enable
ip range : 192.168.2.5-192.168.2.254
url string : Facebook, www.facebook.com , facebook.com notting work.

View 1 Replies


ADVERTISEMENT

Cisco WAN :: WRV210 Not Work With SMB Series SG 100 16 Ports Switch

Jan 19, 2011

I connect a WRV210 router with Small Business 100 Series Unmanaged Switch SG 100-16 Switch. But the switch is not work with the router.In the port of switch (connect with router), no light. In router, the port is disable.Do I need cross-over ethernet cable connect with them?I tried connect WRV210 directly to computer, that is work. I tried connect WRV210 to other (no name) switch and connect this switch with Cisco Switch 100-16 switch than they are work. why?

View 1 Replies View Related

Cisco Routers :: WRV210 - Only 11 Wi-Fi Channels Available

Nov 28, 2011

I have WRV210-E V01 router and there is only 11 (instead of 13) WiFi channels available. Firmware 2.0.1.5. How to get all 13 channels (European ETSI standard)?

View 1 Replies View Related

Cisco Routers :: Connect WRV210 To Internet?

Aug 24, 2011

I am trying to connect a new Cisco WRV210 Router to the Internet via a D-Link (Yes I Know - you have to work with what you've got) DSL-320B ADSL2+ Ethernet Modem and can't seem to get a connection.

View 5 Replies View Related

Cisco Routers :: WRV210 - Cannot See LAN After Connecting VPN To Router

Aug 14, 2011

I have a WRV210 Router which I am trying to use VPN remotely to work on my home files while away. I have been able to connect to the router but cannot see any lan network. I have three desktop CPU's 1 W7 and two XP pro operating systems. The one DT I tried stopping fire wall - no lan. I set up an exception in the firewall.  I have tried to get you the info thru clips and file capture of the status of the router.

View 1 Replies View Related

Cisco Routers :: WRV210 Router Just Reboots

Jun 13, 2011

I've began having problems with the WRV210 where the router just reboots.  Sometimes it may go for an hour or more then it slips into a series of reboots.  The up time varies so I see no pattern.  Contacted support they thought the device may have been defective so we did a RMA.  Well guess what?  The replacement arrived on Friday we put it in place and the same thing is happening.  We are not using any of the VPN or VL options.  Just simple PAT to a few internal machines for RDP access and an internal exchange server.  The Qos is all disabled.  It has the newest firmware which I have reflashed.  I'm at a loss to explain the behavior but it doesn't appear to be isolated to a defective device. 

View 13 Replies View Related

Cisco Routers :: Setup VPN On WRV210 As Second Router

Dec 12, 2012

I am attempting to setup a network containing two routers, a primary giving me ADSL internet access (a 3com 3CRWDR101A-75) and a secondary router that has VPN (Cisco WRV210).
 
The primary router has the following LAN settings: 192.168.0.1 / 255.255.255.0 with DHCP enabled. WRV210 has the following LAN settings: 192.168.1.1 / 255.255.255.0 with DHCP enabled. Cable connection is from LAN port of first router to Internet port on second router. In this way, I'm able to get internet browsing on 2 laptops connected to WRV210 I have also a Panasonic IP PBX connected on the second LAN (the WRV210)
 
I need to setup the VPN on WRV210 to be able to get SIP calls from outside of the local networks (through internet). As I am a novice in networking, both routers are on DEFAULT setting.
 
I have learned a lot during the last 7 days to be able to understand the networking concepts but failed to setup the correct configuration.
 
For example if I change WRV210 from gateway mode to Router mode, I will not able to browse the internet despite the Help file that says "Select the mode in which this Router will function. If this Router is hosting your networks connection to the Internet, select Gateway. If another Router exists on your network, select Router. When Router is chosen, Dynamic Routing will be enabled"
 
Also i am able to ping the first LAN 192.168.0.x from WRV210 but not on the other side (from primary router to WRV210).
 
I am confused to use and combine different settings (NAT, Routing, Ports, ...)

View 6 Replies View Related

Networking :: 1 DSL Modem With 2 Routers WRV210

Sep 12, 2011

I got a client who's getting a VOIP system installed into their/my network. The VOIP IT guys are demanding a separate static public IP address to be forward/made available to their router. They will put their phones on a different local subnet.

So here's what I've offered them and they refused:

1. separate PPPOE login; that way we share the modem and each router handles their own session (cleanest solution but they don't want to pay extra)
2. plug their router into DMZ of my WRV210 (they said they require publicly routed IP going direct to their device (but in this case they would have to assign my private IP as their WAN IP and all internet traffic would go to them unfiltered))

View 9 Replies View Related

Cisco Routers :: WRV210 Not Allowing To Delete VPN Client

Sep 27, 2011

I have a WRV210 router that is not allowing me to delete a VPN client that I had perviously set up. When I go to remove this client on the VPNVPN Client ACCESS table the s/w re-directs me to the Status VPN client table. There I cannot flag/check the disconnect box. I have version 2.0.1.5 s/w which is the latest.

View 0 Replies View Related

Cisco Routers :: WRV210 Resets To Factory Defaults?

Sep 23, 2010

I purchased a WRV210. I configure the device, setup all my tunnels, WAN, LAN, Wirelss, Security, etc. and within 48 hours it "automatically" resets itself back to "out of the box" settings. This has happened twice now - once after it ran for about 4 days and the second time after only 5 or so hours of opperation.
 
Is this a known issue with the device? Is there an update I need to apply? I'd give ya my current FW version but I cannot login as it appears to have rest once again lol - and my tunnels are down so no remote access.
 
I made a backup of the config after the first unscheduled reset - (.bin file) so I have my settings ready to restore.

View 6 Replies View Related

Cisco Routers :: WRV210-A V01 Reset To Factory Default?

Oct 30, 2011

I have a WRV210-A V01 (Software: 2.0.1.5) router that when originally purchased I upgraded the firmware to the newest 2.0.1.5. However after the firmware upgrade the router has not worked right since. [I thought maybe the upgrade did not take, and successfully pushed the firmware 3x times]
 
Everytime you login to the webpage the right-side pane you have to scroll down 3x pages until you can see the settings options. It does that for everypage you visit you have to scroll down 3x pages until you can see the settings.
 
The wireless is sporadic and dropping connections, and now certain options like changing the "Basic Rate:" from "All' to "Default" does nothing and wont let you change it.
 
The main issue I have is that certain wireless settings like changing the "AP Isolation:" cause the router to reset back to factory defaults. and even trying to configure the LAN setup also randomly makes the router reset to factory default.

View 1 Replies View Related

Cisco Routers :: WRV210 - No Access To Configuration Menu

Aug 10, 2011

I was configuring a new unit straight out of the box to test a configuration for a client.  I got most of of the configuration done and was noticing the menus were quirky and so I check to firmware and discovered  it was 1.1.16 (* down level).
 
I finished my setup and rebooted to complete the changes, when I went back to log into the console it would Actively refuses to connect . the first time after powering on it shows  the page title as setup before failing 
 
I have tried a hard reset ( 15 Seconds reset) but it does not work . it doesn't even reset the settings.    (static IP  etc still there)
 
how can I get it fixed  / exchanged under warranty

View 1 Replies View Related

Cisco Routers :: Static IP Address For WRV210 Wireless

Nov 6, 2011

I recently switched operating systems from XP to Windows 7. Since that time whenever I need to reboot the router, it does not recognize my printer. How do I set the router to a static ip address and will that affect its recognition of my computer? I have had no problems with computer recognition, only printer.

View 3 Replies View Related

Cisco Routers :: WRV210 Wireless Frequent Disconnections

Feb 18, 2013

- Small Home-Office network based on a Cisco WRV210 VPN Router connected to another WRV210 in a remote location.
- The WRV210 provides 2 WAP-protected SSIDs, one for the office network and one for visitors
- Wireless channel is set 5 channels away of the closest networks (using inSSIDer)
- There are about 12 wireless devices, 4 connected to the office network the rest to visitors. Not all devices are connected at the time of failure. All wireless devices use DHCP which is set to last 1 day and provide 100 IPs.
- The wireless devices are 1 desktop, 3 notebooks (all clean), iPads, iTouch and Nook.
- The failure symptom is that almost daily, and most likely around the same time, no wireless device can connect to any of the SSIDs unless the router is power-cycled. During the failures, which we have witnessed first hand, there are no apparent reasons: no new SSIDs, now SSID in close range on the same channels, nothing we can easily observed in the network in terms of connections or unusual activity.
- A weirdo also presented by the WRV210 was that its web pages were shown erratically. That was corrected by downgrading the firmware from the latest to previous version.
 
We have used a loaner Linksys router WRT54GC with only the visitor Network on it and even though the situation is not as frequent, it has happened already a couple of times.The WRV210 is out of warranty and discontinued, so we get no support from Cisco that is worth paying for.

View 1 Replies View Related

Cisco Routers :: WRV210 Unable To Connect To Router

Sep 26, 2011

I recently purchased a WRV210 router.  I'm trying to set it up and right now I have my server acting as my DHCP server.  I can not change this.  How can I have the WRV210 recoginize this and pick up on this so that computers connected wirelessly to it will receive IP Addresses from my DHCP Server and not from the router?  Right now if I turn all DHCP off, I'm unable to connect to the router. 

View 3 Replies View Related

Cisco Firewall :: PIX515 URL Filtering Doesn't Work

Nov 14, 2011

I have one outside interface with global IP address 1.1.1.1 and two inside.Both inside interfaces restrict and non_restrict have private IP addresses.I tried to filter some URLs on PIX515 IOS 7.2, only on restrict interface but my filter does not work.I can access prohibited URL from restrict interface. What's wrong in my URL filtering?
 
Here is my config:
 
PIX Version 7.2(2)
!
hostname pixfirewall
enable password 8Ry2YjIyt7RRXU24 encrypted
names

[code]....

View 1 Replies View Related

Cisco Routers :: RV110W Replacement For WRV210 IPsec VPN Tunnel Between Them

Aug 26, 2012

I have a VPN working between two locations using WRV210s at each end. Now I'm looking to replace one 210 with a new RV110W. Can I get the two to work together? The config is quite different.

View 4 Replies View Related

Cisco Routers :: WRV210 - Can't Ping Other Devices On DLink Bridge

Sep 4, 2011

I have a DLink wireless bridge connected to the wireless WRV210 router.   All devices connected to DLink can access internet/email fine and can ping the WRV210, however, they can not ping any device connected to the WRV210 router, nor can any device on the WRV210 ping devices on the DLink writeless bridge.  All devices are on the same subnet, 192,168.100.X  with mask 255.255.255.0.  All devices get their address from the WRV210.

View 7 Replies View Related

Cisco Routers :: WRV210 Freezes / Hanging / Lock / VPN Don't Reconnect

Dec 21, 2010

I'm using two WRV210 Linksys Cisco Routers to create a tunnel between two places with a pppoe adsl internet connection.I made several tests with new 2.xxx and old 1.7xx firmware, and nothing changes.Try to reset to factory defaults, and nothing changes.I have two problems:
 
1) The router crashes after a time working, usualy around 24 hours, sometimes more, sometimes less. The lights still flashing, but nothing happens, no VPN traffic and no ping response from the router, and of course, no internet access. I could see just that the router works a bit hot, but, I think that is normal.
 
2) The VPN IPSEC was configured, and both configurations are identical. All value are the same, I am using the dyndns service. So, the VPN quickly connects and I can ping and access remote computers. Windows Folders, VNC, IT'S REALLY WORKS FULL. WORKS REALLY FINE. PERFECT.
 
BUT, when the router crashes, as I've told on problem 01, after remove the power cord and insert ir again, the VPN don't reconnect.On log's, I could see that it's say that has no preshared key. [code] But, it worked before. Nothing changes, nothing, the router just restarts. No configuration was lost, (I checked the VPN IPSEC TAB), but says that have no preshared key,The unique way to restablish the connection is go on the VPN IPSEC TAB, and change symetrical any configuration, as change MAIN MODE to AGGRESSIVE on both routers.So, now are as MAIN. Tomorow probably it will crash, so, I will have to restart both routers, and change to AGGRESSIVE. So, when it happens again, i will have to back to MAIN.

View 19 Replies View Related

Cisco Routers :: WRV210 Router - Can't Change Static WAN Subnet To 240

Sep 20, 2011

In the Internet Setup area (WAN) when I change to Static IP I can't change the Subnet Mask from 255.255.255.0 to 255.255.255.240 which is the information currently in my D-Link router.  When I try to save the changes I get the error "The IP address is not in the right subnet".  I find it hard to believe that a lowly D-Link $35 router has nore capability then a Ciso Small Business Router. 

View 1 Replies View Related

Cisco Routers :: Can't Access Remotely WRV210 - Website Does Not Load?

Nov 22, 2011

I have configured a router WRV210 and I left it enabled in order to access it remotely, but I can not connect to it. I have checked the settings and everything is fine, but if I try to access it from anywhere in the website does not load, either IE or Firefox or Chrome.

View 7 Replies View Related

D-Link DIR-655 :: Web Filtering Doesn't Work When Linked To MAC Address

Jan 5, 2011

My DIR-655:
Hardware Version: A4
Product Page: DIR-655

The problem is that Website Filer doesn't work if on STEP 3: SELECT MACHINE of Access Control the machine was selected by MAC address. When the machine was selected by IP everything is fine.The problem is that IP addresses are assigned dynamically, so how to make sure that the policy would be applied to the same machine? 

View 8 Replies View Related

Cisco Routers :: WRV210 Administration Pages Not Visible In Internet Explorer

Feb 17, 2012

I recently updated my firmware in my WRV210 router to Version 2.0.1.5 which is the most recent on Cisco's download page. After upgrading the firmware, I found that some of the administration pages do not appear to load correctly in internet explorer version 9.0.5. For example, the ADMINISTRATION -> MANAGEMENT page has data but to see the data, I have to scroll down about 3 pages. All five entries under STATUS do not have any data visible at all which is typical for most of the other administration pages.  An image of the Status Router page is inserted below.   I have logged in to the administration pages with an old version of Firefox 3.0.14 and the pages are visible. The operating system that I am running is Windows 7 64bit.
 
I haven't run across any other entries like on this or other sites. 

View 1 Replies View Related

Cisco Routers :: WRV210 - Quickvpn Disconnects - Remote Gateway Not Responding

Oct 2, 2012

We have 2 remote locations that are connecting to a server at our home location.  Each remote computer uses quickvpn utility to establish a vpn with the home location.  Our problem is that sometimes the vpn disconnects while we are working in remote desktop on server 2008.  Luckily our sessions in remote desktop stay put but we lose the vpn connection.  Most of the time we get a message that the remote gateway is not responding.  Our dsl internet connection seems to work and we have previously had no trouble with connecting to the home location.  We have 3 computers that connect simultaneously to the server at each remote location and sometimes one computer will stay connected while others disconnect. 

View 3 Replies View Related

Linksys Cable / DSL :: Does Multicast Filtering Actually Work (or Exist) On WAG320N

Nov 15, 2010

I have been playing with multicasting on my home network and have hit a problem in that all multicast messages seem to be spewing out over the WIFI regardless of whether there any any subscribers present or not which is swamping all other WIFI traffic. The wired LAN seems to be behaving just fine (no traffic on the wired network if no subscribers present).
 
how do I filter the multicast messages so that they are not sent out over the WIFI (unless a WIFI subscriber is present)? I have tried enabling the IGMP proxy but it makes no difference. I've tried messing with lots of other parameters too but no joy. Does multicast filtering actually work (or exist) on the WAG320N?

View 7 Replies View Related

Cisco Firewall :: ASA 5505 URL Filtering Using URL Filtering Server?

Feb 7, 2012

I have come across articles mentioning that URL  Filtering can be implemented by using ASA 5505 with URL Filtering  Servers. But Websense and other Web Filtering Servers are paid ones ?  Are there any free solutions available ? What exactly is N2H2 ? The  reason is I don 't want to increase the CPU utilization of ASA by  implementing URL filtering within the device. If I have around 30 nodes  which connects to the internet via a 2Mbps line through ASA 5505 and if I  want to block around say 10 or 15 URLs , will it increase CU  utilization beyond permissible limits ? Currently the CPU Utilization is  around 10 - 15 . Here's the infrastructure setup .

------------------------------------------------------------
Nodes -->Switches-->ASA 5505-->Internet
-------------------------------------------------------------

View 4 Replies View Related

Cisco Routers :: RV042 IP Filtering Required

Jan 2, 2012

I have a RV042 and I want to tell it to allow certain IPs to use WAN1 and others to use WAN2.  How do I do this ?

View 3 Replies View Related

Belkin Routers :: Not Having Mac Filtering On F7d1301

Apr 13, 2013

I have added a list of Mac numbers for allowed devices & checked the enable mac filtering box,but did not check the block box.All the Mac number devices, cannot access the wifi.But if I uncheck the "enable mac filtering box"all the Mac number devices can access the wifi.This also include other devices not in the list can also access to the wifi.It seem that the router can only block mac number BUT cannot have "allow list"I checked my firmware = 1.00.22 (Aug31 2000 14.36.01)Is this the latest firmware??

View 6 Replies View Related

Belkin Routers :: Why Cannot Have Allow Mac Filtering On F7d1301

Feb 21, 2013

I have added a list of Mac numbers for allowed devices & checked the enable mac filtering box, but did not check the block box.

All the Mac number devices, cannot access the wifi. But if I uncheck the "enable mac filtering box" all the Mac number devices can access the wifi.

This also include other devices not in the list can also access to the wifi. It seem that the router can only block mac number BUT cannot have "allow list"

I checked my firmware = 1.00.22 (Aug31 2000 14.36.01) Is this the latest firmware?

View 3 Replies View Related

Cisco Routers :: RV220W - Enable URL Filtering For Only 5 Users?

Jun 25, 2012

i have 8 users in my office. i want to enable the URL Filtering for only 5 users in my office and 3 users will have no URL Filtring.

View 7 Replies View Related

Cisco Routers :: RV082 Content Filtering / ProtectLink Web?

Nov 28, 2012

We have just buy a Cisco Small Business Router, model RV082. I need to enable the content filtering, but we just realized that this equipment does not filter HTTPS urls, even with the solution "Cisco ProtectLink Web" the equipment does not filter HTTPS urls.
 
For example, if I type on my browser just [URL], the access blocked, but if I type HTTPS:[URL], the access is allowed!Is there any way to block urls with HTTPS?

View 1 Replies View Related

Cisco Routers :: RV082 Protect-link Activated But Not Filtering

Oct 7, 2011

I have a Cisco RV082 that doesn't appear to filter any selected categories. To run through what i've done so far, within the 'Web Protection' screen i've: enabled URL filteringconfigured a number of categories to filter by putting a tick in the repective business hours boxset the business days to 7 days a weekspecified business time as 24hrshit the save button. 

My licence appears as activated and my platform shows as "gateway service".I've gone on to a number of machines and all are able to access websites that fall under my blocked category (facebook for example even though i've blocked the social networking category).

View 1 Replies View Related

Cisco Routers :: RV180 / RV180W - MAC Address Filtering And IP Biding

May 24, 2012

I'm interested by the router Cisco RV180 or RV180W.
 
So as to increase security, i would like to set a MAC adress access restriction for all peripherals that would be connected to the router (10 computers, 2 servers, 6 Synology NAS) : only allowed MAC adress should access to the internet and network ressources.
 
Does the Cisco RV180 or RV180W have an IP to Mac biding feature and a Mac adress restriction feature ? If yes, how many peripherals/computers can be set ?
 
For example, only 30 mac/IP adress can be allowed on my actual router and it is not enough.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved