Cisco Routers :: SRP547W - Multiple WAN IPs?

Mar 18, 2012

There are a few discussions on this topic but nothing I can find indicated definativley shows that this can be done with this model.I have an ADSL service that came with 1 IP address and then we later purchased an additional 4 IPs (2 usable) for the same service.On our network we have SBS2011 and also a dedicated web server. What I would like to do is forward HTTPS to the web server on our inital IP and then forward https for OWA  to one of the IPs on the additional set.Our initial IP is xxx.yyy.104.112 which I would like to forward port 443 to  192.168.0.12 - web server
 
The additional IPs are :
 
aaa.bbb.30.24 (Gateway Address)
aaa.bbb.30.25
aaa.bbb.30.26 - I would like to forward this to 192.168.0.2 - SBS box
aaa.bbb.30.27
 
I have tried as suggested in other thread setting up a software DMZ that sends public IP aaa.bbb.30.26 to 192.168.0.12. The xxx.yyy.104.112 to 192.168.0.12 works with a port 443  forward fine.
 
When I do this I cant connect from outside. If I change the port forward on 443 to go to 192.168.0.2 I can get to the SBS box from outside using the aaa.bbb.30.26 address .I have also tried creating a subinterface for the aaa.bbb.30.24 addresses and this also doesnot seem to work. Just I am basically asking for confirmation that this can be done with this model, I have put in the latest firmware.

View 3 Replies


ADVERTISEMENT

Cisco Routers :: SRP547W - How To Use Multiple WAN IPs For Port Forwarding

Sep 10, 2011

We've run into some difficulty trying to take advantage of multiple WAN IPs in conjunction with the SRP547
 
What we're trying to acheive is the ability to port forward from our distinct public IPs to different internal servers. Looking at the options under Port Forwarding it looks like we can only configure forwards at the "WAN interface" level, but our problem is that we can't work out how to set up separate interfaces for each of our Public IPs...
 
Our ISP provides us with a fully managed NTU/router with a single "Internet" ethernet port, which we can use by statically configuring IPs on our end. For this configuration this port has been directly patched to the WAN ethernet port on the SRP547W.
 
We have been allocated a 255.255.255.248 (/29) subnet, giving us 5 usable IPs after the ISP's gateway address is taken into account, like so:
a.b.c.208     Network Address (/29 subnet)
a.b.c.209     ISP Gateway
a.b.c.210     IP1

[Code].....
 
I should mention at this point that we're running on firmware version 1.02.01 (023).
 
Is there a CLI or other method of configuration that might work if the web interface won't?

View 2 Replies View Related

Cisco Routers :: Multiple Fixed IP Addresses On PPPoE With SRP547W

Mar 27, 2011

 I have an ADSL connection and have configured the PPPoE subinterface on WAN1 (ADSL)  this connection has a static IP, and I know that the ISP gives that to me through DHCP however I have 4 or 5 additional IP addresses also provided to me on that same link, and they are not given to me via DHCP. 
 
How do I configure this router to have multiple fixed IP addresses on a PPPoE interface?
 
I also need to port forward some ports for each of the IP's but I assume this will be easy after i have the IP addresses setup.

View 4 Replies View Related

Cisco Routers :: SRP547W Multiple IPSec Policies Through Single IKE Policy

Apr 7, 2012

I am trying to create a VPN between an SRP547W and a Cisco IOS router, in this case a UC540.I am running firmware 1.2.4 (003) Jan 11 2012. Now I can do this with an SRP527W and many other routers successfully. Including other IOS routers 1801, 1941 etc.
 
The issue I have is on the SRP547W I cannot create more than one IPSec Policy through a single IKE policy. I require this to route multiple v lans to our remote site. When I try to add an additional IPSec Policy I am give the error "IKE policy has been used by other IPSec policy"
 
This is possible to do on the SRP527W with latest firmware. I have tried rolling back to earlier firmware but instead I am given an error about overlap. Latest release note for this firmware suggest this issue was already resolved.

View 7 Replies View Related

Cisco Routers :: SRP547W Wi-Fi Drop Out

Apr 2, 2012

i see that the wifi on the SRP Freezes. If i am connected via lan, i can still surf the net or connect to another access point on the network and surf. But the wiress devides connected to the SRP loose connectivity even though it shows that the wifi connection is connected. I am running on the latest firmware. this problem has started occcuring only recently

View 3 Replies View Related

Cisco Routers :: How To Administer SRP547W Over IPSec VPN

Sep 5, 2012

I've got a network of SRP547Ws connected with site to site IPSec VPNs. But I can't get to the administrator loging page of the remote SRP547s over the VPN. Is there a setting or method I need to use ?
 
I have looked at the remote administration settings but this appears to be for adminsitration over the WAN interface rather the the IPSec VPN

View 2 Replies View Related

Cisco Routers :: To Use Compatible 3G / 4G USB Modem Via SRP547W

May 29, 2012

Currently, I have setup a demo lab with the UC320W + IP Phones and OnPlus Network Agent all connected to a SG300-28P. I have just obtained an SRP547W because I wanted to use the 3G/4G internet connection via the router as my demo lab is an isolated network.Now, I tried to a couple of 3G modem (UMG181) and 4G Telstra modem (MF821) on the SRP547W but none of these work. I had a look at the compatibility tableI guess those modem models are not listed there. However, when I went on say the Optus website to scout for a more compatible model, none of them hit it right on the mark. The matrix says it can support E180 (while Optus has the E188), E353 (while Optus has the E353). I have already wasted my money on getting the earlier stated 3G/4G Modems and I ain't going to take a chance again.

View 1 Replies View Related

Cisco Routers :: USB Modems Support For SRP547W

Aug 9, 2011

What is the current list of supported USB modems for the SRP547W router?

View 1 Replies View Related

Cisco Routers :: How To Configure SRP547W To Support ANNEX M

Jan 18, 2012

How to config SRP547W to support ANNEX M

View 4 Replies View Related

Cisco Routers :: Voip With SRP547W And SPA303 Phones?

Oct 28, 2012

I have an SRP547W hooked up as the office router with the standard office phones connected via the telephone ports at the back of the unit using 2 SIP lines as well as the PSTN by dialling hash first. We have just added a new staff member and bought an SPA303 with the intention of connecting it through registered SIP lines on the SRP547W, and hopefully have the facility to use the PSTN line when the SIP lines are busy.
 
The problem is, it connects to VLAN100 and gets its IP address and initializes fine however no lines show as configured and it can't make or receive calls. What do I need to configure on the SPA303 to tell it to use the SRP547W as its SIP Server/Proxy (not sure of the terminology).

View 4 Replies View Related

Cisco Routers :: SRP547W Multi Static Public Ip?

Sep 25, 2011

my Networks contain three devices (BPX, DVR, PC) need to fixed IP, do you router supports the Cisco SRP547W  Static Public ip.

View 1 Replies View Related

Cisco Routers :: How To Disable DHCP Server On SRP547W

May 24, 2012

I've purchased a router SRP547W and I would disable DHCP server. On the control panel I can't see anything about disabling this function. I don't need dhcp server on router and I don't need dhcp relay. My firmware version is 1.2.4_003.

View 4 Replies View Related

Cisco Routers :: SRP547W Dropping ADSL Every Minute

Feb 22, 2012

We installed one of these devices as our gateway a couple of weeks ago, flashed the firmware to 1.2.4(003) and it worked perfectly until this morning where it keeps resetting the ADSL every minute and losing the web interface to the unit.
 
The log endlessly reports this:
Feb 24 11:26:00 SRP547W cron.info cron[8779]: (root) CMD (/sbin/check_gn)
Feb 24 11:26:00 SRP547W cron.info cron[8781]: (root) CMD (/sbin/check_ps)

[Code].....

View 17 Replies View Related

Cisco Routers :: SRP547W - Selecting NAT IP From Static Range

Feb 18, 2012

I have a SRP547W which I'm trying to replicate a configuration I had on an old Cisco 847 that recently died.
 
My ISP has allocated me a /29. The DSL configuration means that the IP address on the PPP session is assigned randomly. I have a mix of internal devices on a private IP range and a few devices with publically accessible addresses. All of the devices on the internal network need to be NATted to a public IP from the range allocated to me.
 
I can see that I can use the software or hardware DMZ to set up the servers, but I can't see any way to configure the external NAT address.

View 1 Replies View Related

Cisco Routers :: SRP547W - LAN Configuration For Connecting To BT Infinity Line?

May 8, 2013

We've just purchased an SRP547W that we'd like to connect to our BT Infinity line. What the WAN configuration should be?

View 5 Replies View Related

Cisco Routers :: SRP547W Cannot Create Advanced Firewall Rules

Feb 27, 2012

I have a SRP547W that I have configured the following way:
 
LAN 192.168.15.1/24 VLAN1
LAN 10.10.10.1/24 VLAN10
LAN 10.10.2.1/24 VLAN100
PPPOE ADSL
Software DMZ going to 10.10.10.x and another to 10.10.2.x - this is working OK
 
I now want to use the Advanced Firewall features to block all ports except those that I need as the software DMZ forwards everything. When I try to create the rules I get "the values are invalid" message no matter what I try.
 
I want to create explicit allow rules, followed by a deny all rule for each of the IP addresses used for the software DMZ
 
Have I got the Subnet Mask Correct for the Destination IP? Or should it be 255.255.255.0? It doesnt make a difference either way
 
Policy DetailsNameValueSource IP Address0.0.0.0Source Subnet Mask0.0.0.0Destination IP Address10.10.10.xDestination Subnet Mask255.255.255.254ProtocolAnySource PortAnyDestination Port443ActionPermitScheduleEverydayTimes24 Hours 

View 6 Replies View Related

Cisco Routers :: Router On A Stick VLAN With SRP547w And SG200

Aug 14, 2012

As per the title, I just require 3 to 4 VLANS with inter-VLAN communication enabled. 
 
In the past I have used this router with each port of the internal switch set to a different VLAN, with each in turn hooked up to an unmanaged switch.  This has work fine for me but I want to dip my toe in the world of .1q VLANS and gain some added flexibility and neatness.

View 3 Replies View Related

Cisco Routers :: SRP547W - Can't Ping External Side Of ADSL Interface

Mar 2, 2013

I have installed a couple of SRP547W's and can't ping the external side of the ADSL interface.
 
Is there an option to turn on "respond to ping" and also are you able to forward to a internal IP?

View 3 Replies View Related

Cisco Routers :: Srp547w Restarts When Edit Security In Wireless Table?

Feb 13, 2013

I have recently purchases a Cisco srp547w for my organisation. It is working fine with one SSID enabled. I have configured everything with no problems using the Web interface. However, whenever I click the Edit button, in the Security column, in the Wireless Table under Basic Wireless Settings I get a pop up message which says :"Some values have been changed. The router must restart the wireless module to take effect.Please wait several seconds" I have tried this using 3 different browsers and get the same behaviour in each browser.

View 1 Replies View Related

Cisco Routers :: SRP547w - Change Default IP And Create Additional Users

May 12, 2013

Ive changed the IP address of a laptop to connect to the router with IP 192.168.15.1 but now want to change the router IP address from the defaul to another subnet, so that it is accessable with other workstations on the LAN, but I could not readily find the option to set the Ip address on the router. 
 
I'm signed in with user admin.
 
I also wanted to add addiontal users.  The help indicates there is a User List Add Entry option but from the Administration bar, the left hand menu option shows User Management & User Privileges options.  On User Management, it is possible to change the 2 default user names, but I wanted to leve them and create new ones.

View 2 Replies View Related

Cisco Routers :: SRP547W IP Phone Access To Line Number Via Wi-Fi Voice Vlan?

Mar 19, 2013

The SRP547W supports creating both Wifi Voice and Data vlans.Can I configure a Wifi IP Phone to connect to the SRP547W Voice Wifi Vlan and have the SRP associate it with Line 1 (in lieu of a standard phone connected to the Line 1 FXO port - without additional hardware)?

View 1 Replies View Related

Cisco Routers :: SRP547W Site-to-site VPN With L2TP Over ADSL

Oct 25, 2011

I'm installing a new SRP547W for a client and am having trouble setting up a site-to-site vpn. They are using the WAN1 ADSL interface for their internet connection. When I add a sub interface to it I am unable to see the 'Connection Type' drop down like I can see on a WAN2 ethernet sub interface. I have followed the instructions on page 29 provided here: how I can get a a site to site vpn set up on this router using either PPTP or L2TP over the ADSL interface.

View 1 Replies View Related

Cisco Routers :: RVS4000 - Multiple Internet Connections / Routers Sharing Printers?

Sep 11, 2011

I have 2 internet connections in my office one via Verizon Fios and another  one via the local cable company. On the fios connection I have an RV042 VPN  router and on the Cable company connection I have an rvs4000 router, I would  like to know if there is a way I can connect the 2 so I can share a printer I  have on one of the 2 networks from the other network without using the VPN  feature, like via an ethernet cable connected between the 2 and some kind of  static route maybe?

View 6 Replies View Related

Routers / Switches :: Using Multiple Routers With DSL Modem?

Oct 24, 2011

In my office we have concrete walls and very limited wiring. The way it is set up is we have a Verizon DSL Modem that comes in then I have a router with it that splits the signal to 4 other routers that each split the signal 2 to 3 more times. I have to use routers so that it assigns IP addresses.I bought a new D-Line N300 Wireless router with USB imput. I want to attach my Home Media Network Hard Drive Cloud edition to the 1st router (attached to the modem) and then share the data off that hard drive with everyone connected to the sub routers.

View 4 Replies View Related

Cisco WAN :: SRP547W Router That Supports Bonjour

Jan 22, 2013

I have a small network of about 12 Mac's running OS X, about 20 or so iOS devices and a OS X Server. Currently i have a Cisco SRP547W which works fine when we're all wired in, however we have connection issues when trying to access the server over Wi-Fi. I'm lead to believe that this could be a result of the lack of support for Bonjour within the router. What might be a solid alternative?

View 1 Replies View Related

Cisco Switching/Routing :: SRP547w - Allow Traffic On Port 25 From External IP Filter?

Nov 16, 2011

Can the SRP547W be configured to allow traffic on port 25 from an external ip range to an internal address?

View 0 Replies View Related

Cisco :: Multiple Routers Nat To One Server?

May 3, 2012

I have a job with a budget-limited client who has three Cisco RV042 dual-WAN routers. They had hoped to establish rather seamless *inbound* service, which doesn't seem to be the real purpose for these units, they appear to be designed for bandwidth aggregation and/or rather seamless *outbound* service.Since they have three of these routers, and three broadband connections (two different 5 IP blocks at one ISP, one 5 IP block at a second ISP) I am toying with the idea of using one router per broadband, and configuring each router for One-to-One NAT, dispensing with the dual-WAN redundancy feature.Each router will come from a different public subnet, yet have a one-to-one NAT to the *same* internal server, for instance:

Router 1 - 74.92.X.X ---> NAT ---> 192.168.1.100
Router 2 - 67.78.X.X ---> NAT ---> 192.168.1.100
Router 3 - 97.76.X.X ---> NAT ---> 192.168.1.100

The routers will be configured on the same subnet internally. 192.168.1.1, 192.168.1.2, and 192.168.1.3 respectively. I'll use weighted multiple default gateways on the server's IP configuration, to establish their default and failover gateways.My question is, does configuring multiple routers for one-to-one NAT to the *same* server cause any conflict or failure? You know, of the "sorry bub that private interface is already sucked up by router 1 and I can't do this" nature?

View 9 Replies View Related

Getting Multiple Routers And All PCs On Same Network?

Jul 6, 2012

I want the following configuration:

- 1 Master router with no PC's connected (only the slave routers will connect to it)

- 2 Slave routers each connected to master router Each slave router will have multiple PC's connected via ethernet and/or wireless

I have been able to set this up with all PC's having an internet connection. BUT I need all the PC's to see each other on a single network. I can see all the PC's on a single slave router but I can't see the PC's on slave 1 from slave 2 or vice versa. I have been using the WAN inputs on both slave routers. All 3 routers are Netgear WRN3500L.

View 1 Replies View Related

Cisco Routers :: SRP-521W With Multiple WAN IP Addresses?

Oct 8, 2011

I have an unusual deployment scenario which may require the use of a SRP-521W, the scenario is as follows:Temporary Setup:Cisco 857 As the ADSL router until Ethernet Hand-off is installedMultiple IP addresses delivered on the ADSL WAN serviceCisco 857 put into Bridge Mode and connected to SRP-521W WAN portCisco 521W handles the Authentication and RoutingCheck Point Firewall System connected to SRP-521W LAN-1Check Point Firewall has WAN IP 203.XXX.XXX.XXXCisco UC-540W Connected to SRP-521W LAN-2Cisco UC-540W has WAN IP 203.XX.XX.XX If you understand the above scenario, I am curious if this can be done and if so how? I need to keep the networks totaly separate and the only thing they would have in common is the Cisco SRP-521W.It should also be noted that the SRP-521W Is being used because the ADSL service is only temporary whilst the Fibre Build is completed and the carrier provides an Ethernet Hand-Off, then the Internet service will change to this type of presentation and the ADSL router will be relegated to the dark world of loneliness.I have gone through the router and have been playing around with the settings, the issue Is I have nothing in the LAB work up that can allow me to replicate this environment and test it before deployment... So, how to reduce the amount of trail and error I have to encounter to get it to work.

View 5 Replies View Related

Cisco Routers :: RV120W Multiple Static IP On WAN?

Oct 16, 2012

Is it possible to have 2 IP addresses on wan and setup specific routing rules for each IP ? Or do I need to use another router for that and if which one ?

View 4 Replies View Related

Cisco VPN :: Multiple L2L Setup On 2911 / 871 Routers?

Dec 6, 2011

I have two cisco routers (Cisco 2911 and 871) that I'm trying to establish a L2L VPN  with. Each have a VPN configured to our cooperate office that is up and working. I'm now trying  to establish a site to site VPN from both remote offices. I have my crypto  maps, NoNats, and interesting traffic set up however, I do not even see  phase one come up.
 
I've attached each config. Most of my site to site  experience is on PIX's and ASA so I'm curious if there is something else I  need to do on my outside interface to allow multiple VPN's?

View 2 Replies View Related

Cisco Routers :: SRP541W Multiple WAN Configuration

Apr 3, 2013

I have an SRP541W with two ADSL modems attached to it. Both are running bridged mode with PPPoE connections to two different ISPs, (TPG and Telstra Business Direct). The TPG connection is far cheaper, and has a much higher download limit. Sadly, if I leave the router in "load Balance" mode for the WAN, it "prefers" the Tesltra connection because it's faster. I want downloads for movies/music, Youtube, Internet Radio, etc, to go through the TPG connection. Is it possible to do this in the router, or would I need to set up a proxy server, (or some other external device/application)?

View 5 Replies View Related

Cisco Routers :: RV042 Multiple Subnet DNS?

Aug 24, 2011

I have a RV042 with multiple subnet, 192.168.10.0 and 192.168.9.0. 192.168.10.0 is assigned to the LAN, 192.168.9.0 is created under multiple subnet. Both subnet can access Internet by accessing IP address, but 192.168.9.0 cannot access Internet by using host name. It looks like DNS is not working for the 9.0 network.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved