Cisco Routers :: Connecting 800 Series Through A Sr520?
Jan 12, 2012
i have a demroom set up which includes a sr520 as the edge router connecting to the ISP and i have a uc 560 connected to that which is working fine i also have a new business edition 3000 and a 800 series router which im looking to connect to the sr 520 for access to the ISP as the 800 series doesn't have a ADSL line on it .i have given the 800 series routers wan interface a static address of 192.168.75.14 wich is from the address range in the sr520s default vlan and excluded the address from the DHCP pool. now from the ccp express on the 800 s i can ping the wan port of the 800 s and the default vlan/gateway of the sr520 and the wan ip of the sr520 but no further also once i try pinging it from the cmd on windows i cant ping any further that the wan interface on the 800 s .
View 2 Replies
ADVERTISEMENT
Dec 29, 2012
I have two matching N300 Belkin routers. The cable modem feeds into modem1 and modem1 feeds into modem2. I get a good wireless connection on modem1. Modem2 shows up on a wireless scan and it accepts the password. It however will not connect.
View 1 Replies
View Related
Aug 30, 2012
I bought some hardware and created my own lab to prepare for the CCNA. I only have one machine with a serial port and whenever I try to connect to a router (I've tried multiple purchased from different sources) nothing happens on the screen. If I wait for a couple of seconds and hit enter I get the response shown on the screen in the screenshot I have inserted. If this image is too small I have also attached. looks like it has already asked me this but I am unable to see it. Shouldn't I see some information when I attempt to connect, some acknowledgement that I have connected? I have tried using both hyperterminal anbd PuTTy.
View 1 Replies
View Related
Apr 11, 2012
I'm trying to connect my router SR520 internal Ethernet port to my ESW520 24 port switch. When I physically connect the cable the port on the switch suddenly drops.
View 1 Replies
View Related
Mar 29, 2011
I have a SR520 where WAN configured as PPPoE with Dyndns address. I have done all the configuration through the CCA, so far everything is working fine. But now i want to configure SSL VPN, but I have getting an error message : SSL VPN cannot be configured, please configure wan interface using a static IP address. Is there any way that I can configure the ssl vpn through a dyndns address?
View 5 Replies
View Related
Sep 13, 2011
How to install an SSL key + certificate on our SR520 from the CLI. I have found the following document.
[URL]
I basically have the following files that I need to install:
Key file:
domainname.key
Certificates file:
AddTrustExternalCARoot.crt
[Code].....
View 1 Replies
View Related
Nov 22, 2012
I'd like just notify the missing "no ip name-server" command in sr520 series router. However is possible to enter the command "ip name-server" the only way to delete it is to copy a modified config from tftp or other source to the startup config. This behavior is normal?
View 1 Replies
View Related
Feb 3, 2012
I'm trying to combine dynamic and static NAT on a SR520. My dynamic NAT is specified with:ip nat inside source list 1 interface Dialer0 overload access-list 1 permit 192.168.0.0 0.0.7.255 In addition to this I want to perform static NAT for a couple of selected internal hosts. I can do this:ip nat inside source static 192.168.1.5 10.85.10.2 which works fine but means that the source address 192.168.1.5 is translated to 10.85.10.2 for all destination IPs. What I want is for the above static translation only to occur for a particular destination subnet.To accomplish this I have tried:
ip nat inside source static 192.168.1.5 10.85.10.2 route-map toOtherSite
route-map toOtherSite permit 10
match ip address 150
access-list 150 permit ip 192.168.1.0 0.0.0.255 192.168.10.0 0.0.0.255
But this does not appear to work. Instead it seems to render the host 192.168.1.5 unable to progress through the NAT, whether the destination subnet is 192.168.10.0/24 or not, and I can't work out what I'm doing wrong.
View 2 Replies
View Related
Feb 18, 2010
I have configured the sr520 using cca.Basically I have a device connected to the sr 520 via wireless with the ip address 192.168.200.160.
The SR connects to the internet using adsl and pppoe.I configured NAT to the device for a number of ports, however it doesnt work.
View 16 Replies
View Related
Dec 13, 2011
how can I completely disable DHCP on SR520-FE?
View 8 Replies
View Related
Dec 15, 2011
We've (an independent school) just bought an SR520 with a view to replacing one of our Draytek 2820s. We need to set up some site-to-site VPN with NAT and the Drayteks won't do it.
I've been trying to configure the SR520 in just the most basic fashion using CCA (3.1) and the CLI but with no success. I can't get a PPP connection with our ISP.
I've tried following the instructions in the software config pdf and also tried replicating the various 'running configs' reported in other posts in this forum to allow connection to a UK ISP, with no success. I don't know how many times I've reset the poor thing to factory defaults.
I have to say that I'm dismayed at how flaky the CCA appears to be. Many of the things I've tried with it simply don't work and often end up in it hanging. Close to useless in my view.
So instead I've tried to use the CLI which seems a lot more solid but is somewhat impenetrable and there's precious little by way of supporting explanation.
View 12 Replies
View Related
May 27, 2012
My Draytek 2710 just dies after 2 years so I was looking for something a little more reliable and noticed the spec of the SRP527W-U.I take it with only one antenna and reading a couple of past discussions, the wireless will only manage n-lite as some people call it i.e. 150Mbps, and not the full 300? Oh, and are the ports still only 100M and not Gig?I know the 547 would tick both these boxes but we are talking twice the price. How does the quality and logevity of the SRP500 series compare to the RV series (which would need an adsl modem) or the Linksys boxes?
View 1 Replies
View Related
Jan 20, 2012
My operations manager says "Could you go on-site and configure a new clients new internet connection?" I make the arrangements and go on-site. As I'm working with the providers tech he says "Do you have a sub-interface confgured for a dot1q VLAN id of 1057?", I say "What?". Anyway my firewall is not capable of dot1q VLAN, so he says "Do you have a Cisco router that can provide the trunking?", I say "Yes, I tink so but not with me". The question is can I use an SR520 between my firewall and the provider demarc to route the VLAN he is talking about? My initial discovery says yes but I am not quite sure of the details on how to achieve this on the SR520.
View 2 Replies
View Related
Jan 16, 2012
I'm trying to configure a zone-based firewall on an SR520 and am confused about the 'not' criterion. The 'zone-design-guide' says (my stress): Class- maps define the traffic that the firewall selects for policy application. Layer 4 class-maps sort the traffic based on these criteria listed here. These criteria are specified using the match.where my intention is to let only LAN hosts with IPs in the range 192.168.1.1 to 192.168.1.7 out through the firewall. There may be an easier way of doing this which I'd be pleased to hear about. But, even if there is, I'd also be interested to know what I'm doing wrong in the above.
View 0 Replies
View Related
Sep 17, 2012
When i connect two cisco 2960 series switchs via stright trough cable causes delay in transmission sw1 has vlans and having trunk port connected to router all vlans are able to access internet sw2 is connected to vlan5 on switch1 sw2 has factory default configuration computers on sw2 can access internet but I have low bandwith problem on sw2 there is transmission delay problem?
View 1 Replies
View Related
Dec 31, 2012
The first router is wired to the DSL modem and works just fine as an access point with Internet access. The second router is wired from the first router using one of the 4 ports on both router hubs. The second router is visible but has no Internet. How to configure the second router regarding DHCP, LAN, WAN, DNS etc.
View 3 Replies
View Related
May 21, 2012
I have a Cisco Catalyst 2960 series switch. When I connect another switch or a VMWare Esx server on one of the ports, the port blinks for few seconds and then goes off. When I connect a desktop or laptop or a windows server the ports stay led and I can access resources on the network. However, when connect another switch or a vmware esx server, the port is disabled.
What config in the switch can I check to make sure the ports stay on regardless when I connect a desktop / laptop, switch or vmware server?
View 2 Replies
View Related
Nov 24, 2011
I'm just courious as to the platform specs of the SRP500 series routers. What processor is used, how fast is it and how much RAM and flash do they have?
View 4 Replies
View Related
Jul 4, 2012
Does the two listed POE switch ports on the 880 series routers are active out of the box (default) or is configuration or extra parts required as internet pictures appear to show what looks like a power connector new to the POE ports?
View 8 Replies
View Related
Jun 4, 2012
Tomorrow 2012-06-06 is ipv6 launch day, what about ipv6 on srp500 series ? On product specification cisco wrote : IPv6 (RFC 6204) ready.
View 10 Replies
View Related
May 10, 2012
I'm considering upgrading a small business to the newly released RV180 or RV180W.Does the RV180 series support 6rd (IPv6 rapid deployment?).I see 6rd documented in the other small business routers (e.g. RV110), but I can't find it in the RV180 documentation.
View 1 Replies
View Related
May 16, 2012
I have been able to put two Linksys routers in series no problem but this doesn't seem to work with an RV042.I have a number of customers that need to connect to a private email network via a router based VPN, but since VPN traffic is not filtered in the firewall, I would like to use an older Linksys router to manage the VPN(s) and have it pass data in through the filters of an RV042 on the DMZ port.I am getting stuck on the very frist part of this. Although I can connect to both the RV042 and LinkSys directly (by adjusting my subnet), I cannot ping the Linksys when it is connected through the DMZ port even if I disable the RV042 Internet port.
I know both the Internet and DMZ ports work on the RV042. I suspected that perhaps the RV won't pass through private IPs and tried known available pubic IPs instead of the 192.168.2.x subnet, but still no ping.What would be limiting the RV in this case? Is is possible to setup the RV to work in series with another router? Is there any other way to filter VPN traffic?
View 6 Replies
View Related
Aug 4, 2010
What is the difference between the family series SA 520 and the family series SR 520?, technically of course.
View 4 Replies
View Related
Mar 7, 2012
I'm looking to use 861s at few remote sites connecting to a 881 in the main office using Easy VPN. If I was to get 2 ISPs at the main office, can I configure it in a way that if the primary WAN failsover to the secondary, the VPN tunnels from remote sites will also failover?
Would you recommend an ASA 5505 at main office over the 811?
View 1 Replies
View Related
Sep 4, 2011
Does any one used third party SPF in Cisco ASR 1002 series routers, does it supports them.
View 2 Replies
View Related
May 1, 2013
I've goggled and searched here, and I can't seem to find what I'm looking for. I need to make a couple changes to a clients Cisco 800 series router, enable ping replies add ip addresses to the ssh ACL.I can't seem to find any basic commands for CLI anywhere.
View 2 Replies
View Related
Nov 15, 2012
Normaly all incoming IP addresses can use NAT to gain access. I would like to make a rule that only one IP address can connect to my router and use that port or range of ports defined.
Is there a way to configure a SRP 527W on such a way?
If not possible now, can I expect a software update ?
View 3 Replies
View Related
Jun 15, 2011
what is the maximum number of Lan-to-Lan and user vpns supported in the ISR G2 2911 and 2921?
View 5 Replies
View Related
Aug 6, 2008
which 800 series routers allow 20 Mbps throughput across the WAN port? I have a cable modem that outputs this speed but am having difficulty finding a router that will accept this throughput across the WAN port.
View 21 Replies
View Related
Mar 14, 2012
I wondered, how much power do the SRP520-U series actual draw? Compared to commonly used home-grade equipment I think the power consumption is above average?
View 1 Replies
View Related
Mar 21, 2012
We have deployed a number of 800 series routers for some of our clients and have found that in many cases they seem to disconnect at an excessive rate. When I connected to the console of one the other day I could see that the virtual-interface for the ADSL connection was down, but not the ATM or DSL interface. If I disconnected the cable and reconnected the virtual-circuit came back up momentarily before disconnecting within a minute.
If I switched off the router for a few minutes and powered it back on it would usually remain up for a few hours. I reconfigured the router again using exactly the same config and it seemed to stay up for quite long periods for 4 or 5 days before reverting to type. [code]
View 2 Replies
View Related
Feb 20, 2012
We have an MPLS network to a half dozen remote sites. At our main location we have a 2800 series router. In the routers config are the following lines for QOS. When I go to the routers on the other end of the MPLS, none of them are configured with these same policies. Would these not be in the running config of the 1800 series routers, or is this not setup correct and this should be removed?
View 13 Replies
View Related
Apr 14, 2012
what is the throughput of the 1941 and 3945 series routers, i didn't find this info in the datasheet for both!
View 2 Replies
View Related
