Cisco Routers :: What CPU / Processor Is Used By SRP 500 Series
Nov 24, 2011I'm just courious as to the platform specs of the SRP500 series routers. What processor is used, how fast is it and how much RAM and flash do they have?
View 4 Replies
ADVERTISEMENT
What Is Neg1 And Neg2 Processor In 7600 Series Cisco
May 28, 2011what is neg1 and neg2 processor in 7600 series cisco.
View 1 Replies View RelatedCisco WAN :: 7600 Series SPA Interface Processor-600 Compatibility
Oct 3, 2012does the Cisco 7600 Series SPA Interface Processor-600 (7600-SIP-600-DC) only support a single SPA, e.g. 1 x SPA-OC192POS-XFP?
The 10Gbps through put on the 7600-SIP-600-DC and [URL]to show that this is the case.
Cisco Routers :: How Does Quality And Longevity Of SRP500 Series Compare To RV Series
May 27, 2012My Draytek 2710 just dies after 2 years so I was looking for something a little more reliable and noticed the spec of the SRP527W-U.I take it with only one antenna and reading a couple of past discussions, the wireless will only manage n-lite as some people call it i.e. 150Mbps, and not the full 300? Oh, and are the ports still only 100M and not Gig?I know the 547 would tick both these boxes but we are talking twice the price. How does the quality and logevity of the SRP500 series compare to the RV series (which would need an adsl modem) or the Linksys boxes?
View 1 Replies View RelatedRouters / Switches :: How To Install Two Wireless Routers In Series
Dec 31, 2012The first router is wired to the DSL modem and works just fine as an access point with Internet access. The second router is wired from the first router using one of the 4 ports on both router hubs. The second router is visible but has no Internet. How to configure the second router regarding DHCP, LAN, WAN, DNS etc.
View 3 Replies View RelatedBelkin Routers :: N300 - Connecting 2 Routers In Series?
Dec 29, 2012I have two matching N300 Belkin routers. The cable modem feeds into modem1 and modem1 feeds into modem2. I get a good wireless connection on modem1. Modem2 shows up on a wireless scan and it accepts the password. It however will not connect.
View 1 Replies View RelatedCisco WAN :: What Is The Processor Available In 1941 Router
Jan 31, 2012What is the processor available in cisco 1941 router? is it RISC?
View 4 Replies View RelatedCisco WAN :: 6500 Processor Memory And BGP / RIB Table
Jan 23, 2013We have a couple of 6500 series switches and have 3 BGP peerings to each. The 6500 series switches are loaded with WS-SUP720-3B Supervisor Engine. I believe there is a limit to the number of IPv4 routes WS-SUP720-3B supports(256,000). We also have "soft-reconfiguration inbound" configured on the BGP peerings. Thus when I do a "show ip bgp A.B.C.D" it displays three routes from 3 BGP peers and it displays an additional 3 "received-only routes" which I think is due to the "soft-reconfiguration inbound" configuration. We currently filter inbound routes from the BGP peers to be between /0 and /27
We are now looking to add another 2 BGP peerings. I am not too sure if the WS-SUP720-3B will be able to handle all the BGP routes. Is this limit of 256,000 IPv4 routes due to Processor memory limitation or is it software related? Would removing the "soft-reconfiguration inbound" save me some memory ?
Cisco WAN :: 3845 Processor High Utilization
Apr 22, 2011My client using 3845 as a core router . 200 number of branch are connected through 6 ISP.Some of days average process shows 90 % . Max time 50 %.In the morning when Branch location are off then time also high utilization.High utilization is not continue after intervals of time or periodic time its goes to high.
have any solution for that ?. before once 3845 is crash for that. another is ready for replacee.We test another device like core switches for observation CPU rate.
Intel I5 Processor Download Lan Driver?
Mar 15, 2012windows server 2003 drivers
View 1 Replies View RelatedDual Processor Motherboard For Server?
May 31, 2011Dual processor motherboard for server?
View 1 Replies View RelatedCisco WAN :: 2911 Have Aggregate 1.6 Gbps Towards Route Processor
Aug 11, 2011The Cisco 2911's have aggregate 1.6 Gbps towards route processor - I am trying the same specs for Cisco 3845 router? from url...The EHWIC slot provides enhancements to the prior generation's high-speed WAN interface card (HWIC) slots while provide maximum investment protection by natively supporting HWICs, WAN interface cards (WICs), voice interface cards (VICs), and voice/WAN interface cards (VWICs).
• Four integrated EHWIC slots on the Cisco 2901, 2911, 2921, and 2951 allow for more flexible configurations.
• Each HWIC slot offers high-data-throughput capability
• Up to 1.6 Gbps aggregate toward the route processor
• Up to 2 Gbps aggregate to other module slots over the MGF
Cisco WAN :: 7606 - Add Route Switch Processor 720 As Standby
Sep 15, 2012I have a 7606 Router with single Route Switch Processor 720 at the chassis works as active RP ( Route Processor ). Can I add another RP to the chassis as standby in case of failure of the first RP ?
View 28 Replies View RelatedCisco WAN :: POE Option On 880 Series Routers?
Jul 4, 2012Does the two listed POE switch ports on the 880 series routers are active out of the box (default) or is configuration or extra parts required as internet pictures appear to show what looks like a power connector new to the POE ports?
View 8 Replies View RelatedCisco Switching/Routing :: 1712 High Processor Utilization?
May 22, 2012I am running a 1712 12.4(25d) with NAT, VPN and FW/IDS. I have a broadband ethernet connection at 20mb. As I run some traffic through it, the processor jumps up to near 100% and throughput comes to a screeching halt. IP CEF is turned on and makes no difference when it is turned off or on.
View 3 Replies View RelatedCisco Infrastructure :: SRE-9XX Quad Core Upgrade Processor In Devices
Sep 23, 2012Any thoughts on Cisco putting a quad core processor in some near future version of this card?, the current versions are simple dual processors that does not give you much to work with if running ESXi 5 on one of the vCPUs.
View 1 Replies View RelatedCisco WAN :: 7600 / 6500 / ASR9K - Route Processor Information
Feb 19, 2012I am very new to high end Cisco devices.(like 7600/6500 or ASR9K).
Why do we log in on RP. What actions we can perform after logging-on RP (route processor) or Why they are required ? Cant we make those by normal router mode (router#) .
Cisco Routers :: What About Ipv6 On Srp500 Series
Jun 4, 2012Tomorrow 2012-06-06 is ipv6 launch day, what about ipv6 on srp500 series ? On product specification cisco wrote : IPv6 (RFC 6204) ready.
View 10 Replies View RelatedCisco Routers :: Does The RV180 Series Support 6rd
May 10, 2012I'm considering upgrading a small business to the newly released RV180 or RV180W.Does the RV180 series support 6rd (IPv6 rapid deployment?).I see 6rd documented in the other small business routers (e.g. RV110), but I can't find it in the RV180 documentation.
View 1 Replies View RelatedCisco Routers :: Using RV042 In Series With Another Router
May 16, 2012I have been able to put two Linksys routers in series no problem but this doesn't seem to work with an RV042.I have a number of customers that need to connect to a private email network via a router based VPN, but since VPN traffic is not filtered in the firewall, I would like to use an older Linksys router to manage the VPN(s) and have it pass data in through the filters of an RV042 on the DMZ port.I am getting stuck on the very frist part of this. Although I can connect to both the RV042 and LinkSys directly (by adjusting my subnet), I cannot ping the Linksys when it is connected through the DMZ port even if I disable the RV042 Internet port.
I know both the Internet and DMZ ports work on the RV042. I suspected that perhaps the RV won't pass through private IPs and tried known available pubic IPs instead of the 192.168.2.x subnet, but still no ping.What would be limiting the RV in this case? Is is possible to setup the RV to work in series with another router? Is there any other way to filter VPN traffic?
Cisco Routers :: Difference Between Family Series SA 520 / SR 520
Aug 4, 2010What is the difference between the family series SA 520 and the family series SR 520?, technically of course.
View 4 Replies View RelatedCisco Routers :: Connecting 800 Series Through A Sr520?
Jan 12, 2012i have a demroom set up which includes a sr520 as the edge router connecting to the ISP and i have a uc 560 connected to that which is working fine i also have a new business edition 3000 and a 800 series router which im looking to connect to the sr 520 for access to the ISP as the 800 series doesn't have a ADSL line on it .i have given the 800 series routers wan interface a static address of 192.168.75.14 wich is from the address range in the sr520s default vlan and excluded the address from the DHCP pool. now from the ccp express on the 800 s i can ping the wan port of the 800 s and the default vlan/gateway of the sr520 and the wan ip of the sr520 but no further also once i try pinging it from the cmd on windows i cant ping any further that the wan interface on the 800 s .
View 2 Replies View RelatedCisco VPN :: Easy Failover Using 800 Series Routers
Mar 7, 2012I'm looking to use 861s at few remote sites connecting to a 881 in the main office using Easy VPN. If I was to get 2 ISPs at the main office, can I configure it in a way that if the primary WAN failsover to the secondary, the VPN tunnels from remote sites will also failover?
Would you recommend an ASA 5505 at main office over the 811?
Cisco WAN :: ASR 1002 - Use Third Party SPF In Series Routers?
Sep 4, 2011Does any one used third party SPF in Cisco ASR 1002 series routers, does it supports them.
View 2 Replies View RelatedCisco :: Does LMS 4.2 Support Intel Xeon X7560 Processor In Hyper-V Environment
Apr 8, 2013Does LMS 4.2 support Intel Xeon X7560 processor in Hyper-V environment?
View 1 Replies View RelatedCisco Switching/Routing :: 7600 High CPU Switch Processor And DFCs
Nov 16, 2011I am a little stuck trying to troubleshoot unusually high cpu on 7600 Platform.This has been going on for many hours and not been causing a problem, but this doesn't seem replicated in our network and I am concerned about the cause.I have attached some output below, and disabled netflow on interfaces to free some switching CPU. How to track the cause of this? We only have routing protocols and 5 static routes to Null 0, so I cant see how this can be a route loop, but willing to stand corrected. Routes are learned from BGP with OSPF/MPLS internally on the network. This switch also connects to access switches on RIP and EIGRP.
No change has been made to this device when this problem started to occur so I am suspecting something about the traffic has changed or there is a rougue user? [code]
Cisco Switching/Routing :: 7600 Load On Router Processor From Ip Policy
Jul 29, 2012today i installed new router 7600 , but im facing some thing the cpu is increasing and it reached 50 % and still increasing as the bw dissipated is increasing .im applying ip policy which set next hop for many internet source my question is , how to know the cu percentage which is used by this ip policy , also , how to know the percentage by access-list ??
View 4 Replies View RelatedCisco Switching/Routing :: CLI Configuration Of 800 Series Routers
May 1, 2013I've goggled and searched here, and I can't seem to find what I'm looking for. I need to make a couple changes to a clients Cisco 800 series router, enable ping replies add ip addresses to the ssh ACL.I can't seem to find any basic commands for CLI anywhere.
View 2 Replies View RelatedCisco Routers :: SRP 500 Series Gain Access From One IP Address With NAT
Nov 15, 2012Normaly all incoming IP addresses can use NAT to gain access. I would like to make a rule that only one IP address can connect to my router and use that port or range of ports defined.
Is there a way to configure a SRP 527W on such a way?
If not possible now, can I expect a software update ?
Cisco WAN :: How Many VPNs Can Be Configured In 2900 Series Routers
Jun 15, 2011what is the maximum number of Lan-to-Lan and user vpns supported in the ISR G2 2911 and 2921?
View 5 Replies View RelatedCisco WAN :: Which 800 Series Routers Allow 20 Mbps Throughput Across WAN Port
Aug 6, 2008which 800 series routers allow 20 Mbps throughput across the WAN port? I have a cable modem that outputs this speed but am having difficulty finding a router that will accept this throughput across the WAN port.
View 21 Replies View RelatedCisco Routers :: Power Consumption Of SRP520-U Series
Mar 14, 2012I wondered, how much power do the SRP520-U series actual draw? Compared to commonly used home-grade equipment I think the power consumption is above average?
View 1 Replies View RelatedCisco Infrastructure :: ADSL Disconnects On 800 Series Routers
Mar 21, 2012We have deployed a number of 800 series routers for some of our clients and have found that in many cases they seem to disconnect at an excessive rate. When I connected to the console of one the other day I could see that the virtual-interface for the ADSL connection was down, but not the ATM or DSL interface. If I disconnected the cable and reconnected the virtual-circuit came back up momentarily before disconnecting within a minute.
If I switched off the router for a few minutes and powered it back on it would usually remain up for a few hours. I reconfigured the router again using exactly the same config and it seemed to stay up for quite long periods for 4 or 5 days before reverting to type. [code]