Cisco Routers :: Get The OpenDNS Servers On The WAN Side Of The RV220?
Aug 23, 2012
Recently I have switched from DSL to Comcast Cable. In the PPoE settings you can disable DNS from ISP. However, now since I have to use DHCP I cannot disable the DNS from ISP.If I change the DNS on the LAN or change the DNS in my adapter properties (in local machine) this makes my Brother printer loose connectivity.How can I get the openDNS servers on the WAN side of the RV220?I do not have a static ip address from Comcast either....
View 5 Replies
ADVERTISEMENT
Apr 2, 2013
Router reboot often. I have rebooted the device to factory default almost twice without success .
View 4 Replies
View Related
May 3, 2012
Is it possible to configure DHCP option 150 on the RV220? I have a Cisco 7940 IP phone that is trying to connect back to my office. The VPN is up and I can ping the relevant server but I can't see any way to configure the DHCP option.
View 5 Replies
View Related
Sep 11, 2011
I'm running a Windows Server 2008 R2 connected via cable to my RV220. The server is hosting several websites running in separate virtual machines. These websites are accessible through a reverse proxy set up on the 2008 R2. In addition the 2008 R2 provides access to storage over Windows file sharing (client backup, file sharing ...). Most of the clients are connected via wireless.My problem is that after some time (~24h) I lose the connection to the services provided by the 2008 R2 server as a result of (host) name resolution has stopped working. This only happens for wireless clients. Wired clients are not affected.To give more details: Network clients connected via wireless can't see clients connected via Ethernet and the network shares are not accessible anymore (even by putting in manually "\hostnameshare", but "\[IP address]share" still works). Being connected via Ethernet the communication between client and server works flawlessly - the server appears immediately on the network device list. The other way around is also not possible: the server can’t see clients connected via wireless. The reverse proxy is still accessible through wireless connection by putting in the IP address, e.g. "http://192.168.1.123/homepage" but "http://hostname/homepage" won't work.A restart of the router will fix things but only for the next couple of hours.
View 4 Replies
View Related
Mar 13, 2013
i configured cisco asa 5520 as cisco ezvpn server and cisco 891 as ezvpn client .the configurtion is working fine.i am using client mode on the ezvpn client side.but my quesion is , is it possible to communicate to ezvpn client side internal ip from the ezvpn server side?and one more thing what is the benefit of network extension mode on the client side and how it will work what are possible changes need to do in the server and the client side.
View 4 Replies
View Related
Mar 17, 2013
I'm trying to setup an ASA and a UC540 side by side, to utilize the ASA for data networking and the UC540 for voice. This 'should' work fine, I just seem to be having an issue where the ASA seems to be blocking traffic from the voice network as it passes through.So here is the LAN setup:ASA: 1.1.1.1UC540: 1.1.1.2The UC has a voice vlan 10.1.1.1/24 and a service module at 10.1.10.1/30My PC uses the ASA as its default gateway, 1.1.1.1The ASA then has static routes to the UC networksRoute 10.1.1.1/24 1.1.1.2Route 10.1.10.1/30 1.1.1.2Ping from PC to the UC networks works fine. However, ping from the UC networks to PC fails. ASA logs show traffic being denied due to not having an established connection or something.My guess is that the traffic is being blocked because the egress and ingress paths are different? Traffic from the PC goes to the ASA, then gets routed to the UC and it works. However in the other direction, traffic from the UC is going directly to the PC and bypassing the ASA, because its a directly connected network and doesn't have to route through the ASA to get to the PC. The reply traffic from the PC DOES go through the ASA following its route table, thus the issue of the ASA not seeing the established connection?Same-security inter and intra interface is enabled.So I think I see the issue, I just don't know how to fix it. Is there something I can configure on the ASA to allow for this? My only other option would be to configure a /30 on a new vlan to handle the routing between the UC and ASA or something, but that seems like its going to make this simple setup way too complicated with extra networks, vlans, trunks, etc.I am running ASA version 8.4.5?
View 1 Replies
View Related
Jan 30, 2013
My E1500 enters a state where the LAN-side (broadcast, etc.) works, but the WAN-side (internet connection) just goes away. If I go unplug and replug the E1500 the internet connectivity comes back.When this happens, the wireless indicator on my desktop (Dell with Intel wifi) says I have an internet connection, but I clearly don't.
View 2 Replies
View Related
Aug 2, 2011
I have now the sa`s stablished between SRP527w and cisco 857, but If i ping from a host of Cisco side to a host of SRP side I get only rx traffic on the tunnel, the stats keep tx at 0 and ping is not answered.My tunnel is to send some voice call into IPSEC tunnel keeping DSCP bits, It comunicate SRP voice vlan with Cisco lan.
I have on SRP 2 vlans:
1 Vlan for data on ports 1,2 and 4
1 voice vlan on ports 1,2,3,4.
I connect a netbook to port 3 and I can connect to internet but I cant reach by ping the other side of the tunnel?Maybe traffic from voice vlan is being natted with data vlan ip address?I need all traffic must go into the tunnel without being natted, on cisco side I have a policy to avoid nat but don know if SRP have any problem about it too.All gateways are ok ?
View 2 Replies
View Related
Nov 27, 2012
I would like to allow PING on RV042 from WAN side only from specific IP address, but when I set the rule, RV042 does not respond on WAN side, because Block WAN Request is Enabled.BUT! When I disable "Block WAN Requests", now any IP can ping my router from WAN side. Although I set access rule to Deny Ping from WAN side to anyone, it still responds.
View 1 Replies
View Related
Mar 2, 2013
I have installed a couple of SRP547W's and can't ping the external side of the ADSL interface.
Is there an option to turn on "respond to ping" and also are you able to forward to a internal IP?
View 3 Replies
View Related
Aug 22, 2011
I have a RV220W (running fw version 1.0.2.4) that i am trying to configure for a client. They are set up on Comcast with 13 available IP's. I should note that this netowrk is now currently running without issue using a Cisco Pix 506e. Unfortunately, the Pix is almost impossible to configure using the GUI now as I have to load a 4-year old version of Java now just to get the PDM to load. But I digress.I've set up the RV using the identical settings as the Pix on bth the LAN and WAN side. When I do, computers on the LAN side can all reach the Internet ok. However, once I enable one-to-one NAT for an internal server, that machine can't send or receive ANY traffic to the WAN side. I've even tried setting access rules enabling ANY traffic in both directions, and that has no effect. Either I'm missing something, or this is just one more bug in this product.
Even though it was a bit of a step down going from the Pix to the RV220W, it was done for the ease of setting up VPN's as I was ready to purchase a second one for a new satellite office opening in a few weeks. It looks like we will be switching vendors on the router side as my faith in Cisco is waning at this point.
View 1 Replies
View Related
Dec 19, 2011
I have a RV082.I need to set up a VPN form outside to use a Static address from the Lan side of the RV082.
Lan is 172.16.0.126
Wan is 10.161.48.1
The computer using the VPN will need a virtual IP on the Lan of the RV082 so that it is seen as being on the same network as the equipment on the LAN.
View 2 Replies
View Related
Feb 1, 2013
I just bought a N750 DB router. On boot up, the 5Ghz side will show up for about 20-30 seconds and then it just "disappears". I was even able to connect to it @ 300mb with my laptop. The 2.4Ghz shows up just fine.
View 3 Replies
View Related
May 31, 2012
I have successfully set up a pptp vpn from my new rv220w. I have also successfully logged in using 2 seperate laptops and also my iPhone. They all work great. There is one issue. When connected and I log into the router it does not show these laptops or iPhone as being connected to the vpn. There is two spots that its supposed to show the page refreshes and shows nothing connected. Is there a setting I am missing?
View 2 Replies
View Related
Nov 25, 2011
I've been tasked with redesigning a small network (15-20) including wireless. Cisco recommends the RV220 as the entry point Firewall/Router/Wireless and researching there are apparently some good and bad sides of having everything all in one unit depending on who you ask. The other option would be to get a dedicated Firewall/Router and then run the wireless on a seperate device(vlan). I'm fine with either solution but my main concern is performance on the physical connections as well as reliability with the wireless having good range and not dropping or having to reboot the router continuously. Behind the router/firewall I will purchase one of the Cisco 24-port gig switches for physical connections through the office. How to get for the router/firewall/wireless setup? Budget is not a problem although I don't want to pay for something that is overkill for 10-15 wired workstations and 5-10 wireless including a guest wireless.
View 6 Replies
View Related
Jan 8, 2012
I have a 5508 WLC that for whatever reason cant take any DNS settings, but I still need to get some filtering on the public hotspot side of my wireless network. Can I put the DNS settings on the router that the circuit terminates on? This is the same router that the public vlan is defined on, I'm just not sure if I can put DNS settings in place for just one vlan, and how that'd work.
View 3 Replies
View Related
Feb 24, 2012
I somehow have managed to get opendns blocking access to websites on my home networkI am the administrator and the only person who would have (accidentally) installed opendns, although when I search through my computer, I don't see any files relating to this.I have done a little research and know that I would have to installed this at some point myself, but I can't recall doing this, and would really like it gone. So far, I have contacted my ISP and asked them to issue me a new IP Address. That did not work. I tried ipconfig/flushdns, ipconfig/release & ipconfig/renew, all did not work[CODE]
View 17 Replies
View Related
Aug 29, 2011
I'm trying to set up opendns on my DIR-825, firmware v2.05. Under the Setup/Network Settings I set the primary and secondary DNS Server IPs to the ones from [URL] and save the settings and they don't stick.I have also unchecked the "Enable DNS Relay". Well, tried it on and off and neither pad a difference.
View 3 Replies
View Related
Dec 22, 2010
I have been using OpenDNS for a long time, and I just got the Linksys E3000. When I tried to change the settings to add OpenDNS it said that some changes may cause the Cisco Connect software not to work anymore.
If I change the Static DNS 1 and 2 [URL] will I still be able to use all of the functions in the Cisco Connect software?
View 9 Replies
View Related
Mar 14, 2011
I see support for DynDNS.org and ZOT.com only.
View 7 Replies
View Related
Feb 8, 2012
Will Cisco be adding support for OpenDNS in the next firmware release? I have the e4200v2 and want to be able to specify times when I want the filtering to be off. After the kids go to bed. Netgear allows this with their nicely implemented OpenDNS in their routers. I am currently using OpenDNS with this router but don't like having to log in to remove the filtering and then adding it back on when I'm done surfing.
View 5 Replies
View Related
Jan 10, 2012
My isp seems to be using a Transparent DNS proxy and I tested DeleGate on a windows PC and opendns works but I would like to set my router to forward all 53 udp to 5353 udp on to 208.67.222.220 so that opendns can work on ipod,ipad and smartphone etc, I have tried to use the following command to set the router to forward from port 53 to 5353 but no luck:
nat mapadd intf=Internet outside_addr=208.67.222.220 inside_addr=192.168.1.66 protocol=udp outside_port=5353-5353 inside_port=53-53 mode=auto weight=10
View 2 Replies
View Related
Apr 4, 2013
Lately, Ive been trying to change my router DNS to OpenDNS. Somehow, after changing it, I couldnt access the router page at 192.168.0.1, getting the error 500 message. I unplugged and plugged the router with no effect. Im using a dlinkddns.com dynamic IP, and have a few ports forwarded for my DVR. The router model is DIR 615. want to change the DNs for speed and filtering purposes.
View 4 Replies
View Related
Jan 28, 2012
I am running a guest network on my E4200V2. I have changed my DNS servers on the router to use OpenDNS for traffic filtering. The filtering on my non-guest networks is working fine; the OpenDNS test sites are blocked. However, when I use the guest network, the OpenDNS test sites are not blocked. There's obviously nowhere that I can change the DNS settings for the guest network.
I know that parental filtering in the router applies to the guest network, however, it seems that the DNS servers for the non-guest networks don't apply to the guest network. Is this true? Have others seen this?If so, that's pretty disappointing. OpenDNS filtering is much more powerful than the 8-URL blacklist I can create in the router admin. If I want to filter sites for my kids, having a guest network that is essentially wide-open (except for 8 URLs) is not an ideal situation.
View 6 Replies
View Related
Apr 12, 2011
I would like to change my DNS settings and I can not figure it out through the routers gui. I tried Google'ing it but I got nowhere.
View 2 Replies
View Related
Nov 23, 2012
I bought the EA2700, and put the addresses for the DNS servers of OpenDNS into the Static DNS 1, 2, and 3 so that my internet access is filtered (OpenDNS provides content filtering). However I read online that users can bypass the use of OpenDNS DNS servers by choosing their own DNS servers on their computer network connections.The solution is involves firewall rules that limit DNS servers accessed through port 53 to only OpenDNS.
View 1 Replies
View Related
Jan 27, 2013
I have a small business network including 2 QNAP 219 NAS servers. Several times we have noticed, the connection to the servers are lost. We have tried to restart the servers without luck. But when we restart the router, all problems are gone and we can reconnect.
View 2 Replies
View Related
Sep 8, 2011
I did install server system with mscs and Domain controller and Active directory.I want to connect this dc/ac server from other places such as korea / and japan.
I have a public IP But our country ISP Don't open 135/445 port for security. So I can't connect DC/AC server from other places.At this time i did read many article and find good way to handle it. Is it possible for other servers to connect DC/AC server by using the RV082 VPN service.
View 1 Replies
View Related
Jun 23, 2012
Does the Host file allow connections to your computer?Although I have placed some server names into the host file, Wallwatcher 5.0 is indicating that those servers have made connections. This didn't seem to be a problem before I took some online advice to add servers to my host file. I use iptables on a WNDR3700 router with DD-WRT firmware. In the iptable rules I've also blocked these servers. One example is cnbc7.net and a couple of U.S. Akamai servers.
View 7 Replies
View Related
Dec 19, 2011
After a day of troubleshooting I have finally got the QuickVPN client to work. I connect however during the connection I get: "Server's certificate doesn't exist on your local computer. Do you want to quit this connection?" I click no and it connects fine other than this error. So how do I get rid of this error? Also I have exported the client certificate from the RV110 and put it in the quickvpn directory as I saw suggested elsewhere.
Here is my log:
2011/12/21 00:39:44 [STATUS]Connecting...
2011/12/21 00:39:44 [DEBUG]Input VPN Server Address = ***.***.***
2011/12/21 00:39:45 [STATUS]Connecting to remote gateway with IP address: **.**.**.***
2011/12/21 00:39:50 [WARNING]Server's certificate doesn't exist on your local computer.
2011/12/21 00:39:56 [STATUS]Remote gateway was reached by https ...
[code]....
View 2 Replies
View Related
Feb 23, 2012
I have setup a site-to-site VPN tunnel between 2 sites using CISCO rv120w.Everything works fine; any PC on one site can access all systems on the other site and vice-versa.The issue I have is when I start a VPN connection another site on Internet using IPSecuritas.I can initiate a VPN to site 1 and site 2; but when connected, I can only access servers that are located into the same site I'm connected to; I cannot ping the remote site.The Range of IP addresses on the internet during my tests is 192.168.11.0 (I 'm using a Mac)
-Systems with IP 192.168.1.1 and 192.168.10.1 are bridges
-Systems with IP 192.168.1.2 and 192.168.10.2 are CISCO rv120w
View 4 Replies
View Related
Oct 13, 2010
I recently cut over from a WRT54G to a RV120W. I am having an issue where I type [URL] (for a server running on my network) in my web browser while on the internal network and it always comes back with the router login page. Basically it is supposed to go out of the router and then come back in on the public IP address and hit that server. There was a function on the WRT54G called "Filter Internet NAT redirection" which when turned off would allow this to happen. I am not seeing a feature like this on the RV120W
[URL]
View 29 Replies
View Related
Mar 24, 2011
ipconfig /all reports one of my three DNS servers as 192.168.1.1. My Default Gateway and DHCP Server are also reported as 192.168.1.1. This is from a recently installed Valet M10 updating an old Linksys router. The Linksys reported the three DNS servers octets independent of the router's ip and other default settings.JK
View 1 Replies
View Related
