I installed an SG 200-26 switch this weekend, and now I have a problem scanning from our Canon Imagerunner printer/scanners to any IP address on our network. It's not a DNS issue as the address book entries contain the destination computer IP address.
View 4 RepliesI have an Canon MP 530 that works great for my home office network, but right now it's being shared off one of my PCs. I would like to network it like my HP LaserJet P2055dn, but not just printing, also fax and scan (via Adobe Acrobat Pro). Does this product really exist.
About two years ago I bought a Linksys device that turned out to be a $100 mistake, but now I'm really needing this sharing functionality.
Is there a free scan to determine ipaddress of westell7500 router?
View 3 Replies View Relatedi have a SG300-52 Switch, route mode is enabled, and it is using the latest IOS.I have created 4 Vlans in this switch, till this point its OK, but once i try to give ip addres to the created Vlan either from the GUI or CLI the switch is not responding. i have to go and manually reset the switch using a pin.
View 8 Replies View RelatedI am trouble shooting a SF 200-48P and I am a bit lost without a CLI not used to the GUI. What I need to know is how to add the IP address helper command to the switch?I have a number of IP phones which are not getting an IP address from DHCP (PCs which are diasy chained off the phones are all working correctly). On the higher end switches I would have added the IP address helper command to the VLAN and that would have sorted it. How to do this on the small business switch.
View 2 Replies View RelatedI have a printer canon 2230 i want to canact via network cabel throw switch ,then i want to sarching printer then show workgroup and next proces is not go.
View 1 Replies View RelatedThe company I work for has a small network and it has a windows 2000 server. When the Canon iRC 2880 printer is connected the server gives a error saying that a duplicate name exits in the network. I tried changing the IP address as well. When I changed the IP address of the printer the duplicate IP address moved the new IP address.
View 10 Replies View RelatedI m using DIR600 router. from few days my router shows smas port scan attack detected. then how to prevent this type of attack.
View 2 Replies View RelatedI volunteer at a school who just purchased two 48 port SGE2010 managed switches. I am not a big fan of the web gui and was hoping to see the standard Cisco command prompt instead of the menu-type interface.
Is there a way to view the MAC table showing which MAC address is plugged into which port on the switch? I have been fighting with the menu and the gui for a while now and do not see this anywhere.
We had to send our Canon Pixma MP830 all in one printer in for repairs, and we have an mx870 loaner. The MP830 was connected directly to the desktop computer and to a lap top in another room via a dlink router. But we do not know how to get the lap top to recognize the MX870. We tried adding it and entered the name Canon Pixma M870, and the program does not accept the name.
View 1 Replies View RelatedI installed LMS 4.0 succesfully, but when i go to topology, can view all network, but the "AswitchA" Core 4507R+E be displayed as "?"
And it can not display this "AswitchA" into CISCO VIEW, display this messaje :
"Cannot find applicable device package for ... This error could be due to one of the following:
- The device package for this device type is not installed.
- Device support for this device type is not available.
- You are trying to open a component inside a device.
To correct the problem, either install a device package for the device type, or open the parent device to manage the component."
I upgrade the IOS for switch c2960 and the switch do not boot from the new image.See the files attached.
show version
show boot
show flash
There is a mistake with settings?
I have a question regarding SG300 series small business switches.If I switch between the two possible images, will the configuration get lost or is the configuration the same independent of which image I choose?
View 1 Replies View RelatedI wanted to upload image having .tar extension in Cisco 3560 switch. What are the steps to upload.
View 1 Replies View RelatedWe've ordered a 4500 core switch and 4948 Server Farm switch for our client, but the switch box does not include a IOS image CD or anything related to IOS image and now the client is asking us why is this item missing as the IOS
-S45UK9-32-1502SGCAT4500e SUP7e Universal Crypto Image
-S49IPB-12253SGCisco CAT4900 IOS IP BASE W/O CRYPTO
I am looking for an IP Services IOS image for a WS-C3750E-24TD-E switch.Currently have a two switch stack composed of WS-C3750E-24TD-E & WS-C3750G-12S-E.Current IOS running: IP Base.
I need to be able to remove the stub mode for EIGRP, so I am looking for an IP Services image for WS-C3750E-24TD-E switch to be able to run full EIGRP. But I am not able to find one. What is the main difference between WS-C3750G & WS-C3750E switch?Is this even possible for the WS-C3750E?
Today my sw upgrade procedure failed on a ME3600 Series switch.
From the past with LAN switches i thought that we need to set IP settings manually in ROMMON and then load remotely an IOS via TFTP.
But it seems that this is not supported there.So now i would like to ask how can i bring a bootable IOS to the ME3600 switch. and at least: how can i bring back my switch to life.
I could imagine that there is a missing default gateway.But what is the syntax for default gateway? And after I have connectivity i need to work for the process of loading a bootable image to the switch.
i am facing an error while upgrading the IOS image on 3560 switch. [code]
View 1 Replies View RelatedI am trying to upgrade my cisco WS 2960 24 TC-L switch with the IOS image c2960-lanbasek9-mz.122-55.SE6.bin and my existing IOS image is c2960-lanbasek9-mz.122-50.SE5.bin. when i am copying it to flash, it is getting copied but when i tried to boot it after entering command boot system c2960-lanbasek9-mz.122-55.SE6.bin , it gave me an error.
both flash dir and error are attahced herewith.
I inadvertantly copy the wrong image on to a 35609-X switch and now it gets stuck in a particular mode.
The original image was: c3560e-universalk9-mz.122-53.SE2/c3560e-universalk9-mz.122-53.SE2.bin and I replaced it with: c3560e-universalk9npe-mz.122-55.SE1.bin ( this is what the download site identifies as the image for 3560X-24P-S)
It now sticks at: Front-end Microcode IMG MGR: Programming device 0...rrrrrrwssssssssssssssssssspssssssssssssssss
How can I get back on to delete this image? It ignores the break key.
How do I add network drivers to a wds boot image on 2003R2. I see that 2008 has the add driver option but that doesn't exist in 2003r2.
View 1 Replies View RelatedWe have Cisco 4503-E switch and software version is cat4500e-universal.SPA.03.01.01.SG.150-1.xo1.bin. Now i have uploaded cat4500e-universal.SPA.03.02.01.SG.150-2.SG1.bin IOS-XE software in the switch and want to boot the switch from this image.
View 17 Replies View RelatedI'd like to know if is it possible to load lan base image on Cisco Switch 2960 TC-S. This model (WS-C2960-48TC-S) come with lan lite image and it's the same (phisically) of the 2960 TC-L (lan base image).If I try to upload the lan base image on flash of 2960 TC-S will works?? ..or the switch goes damaged?
View 2 Replies View RelatedI've 3750X switch that isn't loading email. then I went to rommon mode and accidently for "format flash". after that I loaded 15.0 SE2 s/w on it using tftp server but it doesn't boot up with that image. flash had only .bin file after I loaded it from tftp server.
since it wasn't booting up, I did format flash again and thought to load image again from tftp server but now, it doesn't load image from tftp server.
I'm have upgraded our ASA5510's from 7.0.8 to 8.4.3 and now I just need to do the ASDM, but get this error? The bin file has been uploaded: [code] Device Manager image set, but not a valid image file disk0:/asdm-647.bin.
View 3 Replies View RelatedIs it possible using any module in CW to get the MAC address and IP address of all switchports on a 6500?
View 6 Replies View Relatedis it possible to assign a loopback address to a typical switch port on a 2950 switch? I want to be able to have some devices connected to a switch to test access lists and VLANs.
View 3 Replies View RelatedI'm looking at adding a Cisco 3750-X switch running c3750e-universalk9-mz.122-55.SE1 (IP base license) into a stack of 3750-G switches running c3750-ipbasek9-mz.122-55.SE1.bin Given that the version and feature sets are the same I don't forsee any compatibility issues. Would there be any reason why a universal image wouldn't stack correctly with other switches running the single .bin file?
View 9 Replies View RelatedI am planning to put a switch in between ISP and Router.( WAN section)
View 3 Replies View RelatedOK- so my computer was going haywire - freezing, lagging, crashing. Only thing I could do was to restart in safe mode and run a full AVG scan which did show viruses that were sent to virus vault. Once I restarted into normal windows mode, the computer seems to be working fine with no freezing, etc.....but my LAN connection won't work. Looking at all the device managers and info on the LAN - it says "device is working properly". I have tried downloading a few "fix it" programs like Winsockxpfix and Complete Internet Repair - didn't work.
View 12 Replies View RelatedThere 's a Cisco IP phone that sits between a PC and the switch port. On the switch port, no MAC address is learned. However, the switch is able to detect the IP phone and deliver power to it:
TNSWACCS04A1#sh power inline fa1/0/13
Interface Admin Oper Power Device Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Fa1/0/13 auto on 5.0 IP Phone 7911 2 15.4
[code]....
Switch is Catalyst 3750 with IOS version 12.2(58)SE1
I have an HP J4680 printer and would like to know how i can scan to my laptop wirelessly
View 1 Replies View RelatedSo we had a PCI scan, and we failed on a couple things where the devices are HP printers.For those that don't know, PCI = Payment Card Industry
Quote:
service tcp 34862
Linux nfs-utils Overflow
The rpc.mountd service was detected on this server. This is a remote procedure call (RPC) based service that is known to have an overflow vulnerability which can give root-level access to an attacker. Note that this service may have been activated by default when you installed your operating system.
Quote:
service udp 2049
RPC nfsd Detected
The nfsd program faciliates the Unix Network File System, which is rarely meant to be exposed to the public Internet. Many Unix/Linux systems activate a number of RPC services by default during installation. The nfsd program has also had vulnerabilities which could allow an attacker to gain control of this system.
Quote:
Windows Registry Accessible The Windows Registry is accessible by remote users and can be accessed using a NULL session (no credentials) or using the built-in Guest account. The Registry is a critical collection of information that governs how Windows and installed applications operate. The Registry is a primary target for attackers to view or modify.
These 3 came from an HP LaserJet M4345 MFP.What needs to be disabled? Strangely, the other M4345's didn't get these. I compared configurations, but everything was the same that I could see (except for the SNMP setting).