Cisco Switches :: SG100-24 MiniGBIC Uplink Port Doesn't Work

Aug 22, 2011

I've just purchased 2 switches SG100-24 and use fiber cable to connect these switch together. I plugged cable in module MGBSX1 and then put it into miniGBIC uplink port but despite trying many times, also rebooted devices, I still not make these uplink ports up. how can I bring them up?

View 5 Replies


ADVERTISEMENT

Ethernet Port That Doesn't Work

Mar 15, 2012

Would a Linksys USB300M Network Adapter allow my computer to connect to the internet via Ethernet? My computer has an Ethernet port that doesn't work. I need Ethernet connection to connect to the internet through FIOS. I currently use an USB port on my computer to connect using DSL. I want to purchase a USB-Ethernet adapter that plugs into my USB port but has an Ethernet jack at the other end: USB300M Network adapter - Hi-Speed USB

View 5 Replies View Related

DMZ Mode And Port Forwarding Doesn't Work?

May 22, 2012

Jason9 i'm having the exact same problem as above, don't mean to hijack but I'm using talktalk isp, I have AVG 9.0 and have a static IP and forwarded the required port on the router.

View 19 Replies View Related

Port Forwarding Doesn't Work Anymore?

Jul 25, 2011

I have a W7 PC 64 bit system and I've been trying to port forward the port 25565 for my Minecraft server. However for some reason (even after port forwarding the right one) people still can't connect. When I check on Open Port Check Tool - Test Port Forwarding on Your Router It still says that the port 25565 is closed!I've even created an Inbound and Outbound rule in the Windows Firewall advanced settings. I use Avira Anti-vir fyi..

View 19 Replies View Related

D-Link DIR-655 :: Port Forwarding Doesn't Work From LAN PC?

May 12, 2011

Edit I've found a work-around. It's on page 2: [URL]

I'm having this really weird issue with my DIR-655 revB. I have some port forwarding rules set up and externally they work fine. However, if I try connecting to my IP address using those same ports from a computer within my LAN, it won't connect.

Externally, I can ping my WAN address and connect through forwarded ports. No problems. Internally, pinging my WAN address apparently works (just now is the first time that's worked for me), however I can't access any of my computers using the WAN IP and port forwarded ports. I can access them by going directly to their hostnames or LAN IPs.

Things I've tried:

-Disabling/enabling firewalls on all computers involved

-Disabling/enabling QoS engine

-Disabling/enabling DNS relay

-Disabling/enabling Advanced DNS

-Adding custom nameservers from Google and Comodo

-Restarting computers

-Clearing DNS cache (I use a dynamic DNS name which works externally but not internally. This gets the correct IP internally and connecting directly to the IP doesn't work either.)

-Modifying the NAT Endpoint Filtering settings

I have an external DSL modem connected to the router using PPPoE if it matters.

The weird part is that it works externally but I've modified all of the values I can think of in the config with no luck. I upgraded to the DIR-655 from a DIR-615 which had all these settings in it and worked fine (until it started acting up which is why I replaced it).

View 14 Replies View Related

Servers :: Port Forward Minecraft Doesn't Work

Aug 7, 2011

i have port forward minecraft on a netgear WGR14v9 on the router manager but when i run the mincraft server it says i havent and online port checkers aswell

View 2 Replies View Related

Ambit U10C037 - Port Forwarding Doesn't Work?

Mar 26, 2011

I have been trying so hard to get the following ports to work:

5120 - 5300

I have looked up countless guides, and have done everything in them, I have a static IP, I used the gateway to create the port forwarding rule, AND opened the ports on the windows firewall.

Nothing works. The port remains closed, and I can't host games. My modem is an Ambit U10C037

System Specs:
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel Pentium III Xeon processor, x86 Family 6 Model 23 Stepping 6
Processor Count: 2

[Code].....

View 12 Replies View Related

D-Link DIR-655 - Why Doesn't Port Forwarding Work Correctly

Jul 27, 2012

First off, my router is a D-Link DIR-655, firmware v2.07. I'm trying to port forward port 25565.

My port forward settings are this:

However, when I use this open port checker, it claims that I don't have that port open. It looks like this, without the blurred out parts:

Added note: The way I want to use it is by my IP (xxx.xxx.xxx.154:25565). I have the software installed to do so (I'm using a minecraft server, connecting through minecraft), but I can't enter my IP in the IP address field, it says that it's out of the range of the LAN.

View 2 Replies View Related

Routers / Switches :: Linksys WRT54GS Doesn't Work With Password?

Mar 5, 2011

I have a linksys wrt54gs wireless router (working fine since last 3 years) which connects to the internet fine if there is no password set. However if i set WEP password to protect the wireless connection, i am not able to connect to the wireless connection. Everytime i enter the passphrase, when trying to connect to the wireless network, it refuses to accept the password. I have tried this with 2 laptops (both running windows 7) and both have same issue.

View 2 Replies View Related

Netgear WRG614 - Port Forwarding From Modem But It Doesn't Work

Feb 26, 2011

I have a Netgear WRG614 and a Westell 610015 Modem. I need Port Forwarding. I have tried setting up a static IP then Port Forwarding but it doesn't work. I have tried port forwarding from the modem but it doesn't work. I wanna forward ports "80, 9958, and 5816". The reason is because I am gonna host a game server on my computer.

View 14 Replies View Related

TP-Link 3G/3.75G Router :: MR3420 - Port Forwarding Doesn't Work

Jan 24, 2013

Region : Austria
Model : TL-MR3420
Hardware Version : V2
Firmware Version : TL-MR3420_V2_121206
ISP : 3

I am using a MR3420 V2 together with a E398 modem. The connection works well, but I can't do any port forwarding (virtual server). Using another router (Tiny Dovado) with the same E398 modem works flawlessly to forward ports.

View 14 Replies View Related

Linksys Wired Router :: RV042 WAN2 Port Doesn't Work

Nov 21, 2012

Continued from [URL] which appears to have been closed by a moderator with a reference to Cisco small business website, but the registration there doesn't work, all buttons are inactive etc.
 
I just need to know what to do with this RV042.  I have two modems, a cable and an ADSL. Both are configure correctly, in bridge mode.  Both work fine when connected to WAN1, but when connected to WAN2 they never go online (dont' get IP address).   The connect lights are on but they never go online.
 
Firmware Version: 1.3.13.02-tm

View 1 Replies View Related

Belkin Routers :: AC1200 - USB Port Doesn't Work With Canon Printer?

Feb 2, 2013

I have a Belkin AC1200 Router. It seems working properly re Internet/Wireless connections. When I connect a printer (Canon Pixma MP500) through the USB port the (USB) light doesn't turn on, nor the printer is appearing on the "available devices" (Belkin USB Print and Storage Center).

View 2 Replies View Related

Linksys Wireless Router :: WRVS4400N Single Port Forwarding Doesn't Work

Jul 1, 2012

Type: WRVS4400N Wireless-N Gigabit Security Router with VPN.I bought it last week. Its single port forwarding has an issue. I can only use that function for a couple or hours. Then the forwarding does not work. I have to reboot the router to make it available again. 

View 1 Replies View Related

Switches On A Network Doesn't Support Remote Port Mirroring?

May 2, 2011

If switches on a network doesn't support remote port mirroring and only local port mirroring, What are the options to still capture all the traffic from all switches on 1 single core switch?

View 1 Replies View Related

Cisco LAN :: SA 500 - DMZ Over Single Uplink And Switches

Feb 7, 2013

I have an SA 500 with the optional port configured as the DMZ. The LAN ports are running the 192 range and the DMZ is the 172 range.
 
I have seperate offices (A few hundred feet apart) that have been connected  with 2 un managed switches up linked with a single wire. The 192 range stuff runs over this. I need to get the DMZ out to the second room and was asking about how to do this over the single up link and switches. (Trying not to run a second wire)
 
My lack of understanding had me draw up this diagram attached as a picture, to ask about. What it shows is me trying to get the DMZ through the up linked switches to the other room. I thought of using 2 routers, one on each end. I've been told this is incorrect and wont work.
 
Maybe a purchase of a second hardware and eliminate the switches? (up link the SA 500 to another device?) What should that device be?   

View 19 Replies View Related

Cisco Switches :: SG300 Port Counters Via SNMP / Do They Work

May 24, 2013

I've got an SG300-10 connected back to back (trunked) with a Cisco 3560X switch, across a fibre link and am seeing some big inconsistencies in terms of unicast data transferred across the ports between them.
 
During a night time window of 4am - 6am I run backups which involves a large copy of files, that almost saturates a GigE link - we can see from the 3560X end that the link is running at a bit over 800MBit/sec of throughput, sustained.  The duration of this transfer is consistent with the size of the files being transferred (ie just over an hour, and is what I'd expect for a data transfer of about that amount).  Back-of-the-envelope calculations indicate that the 3560X is measuring this data throughput correctly.
 
However on the SG300 end of the link, which is also being polled by the same application (Cacti), I'm observing spikey counts of only around 20MBit/sec during that window.  These counters are very obviously incorrect - there's a huge amount more data moving across the port than that.  The incorrect calculations are showing on both the trunk port out of the SG300 (uplink) as well as the interface where the NAS is connected in (which is an access port).
 
Cacti is polling the OID:  .1.3.6.1.2.1.2.2.1.16.57  which translates to IF-MIB::ifOutOctets.57 = Counter32.I'm running version 1.3.0.62 but this problem is not new to this release - previous releases and 1.2 based releases also had this problem.
 
It looks like multicast traffic may be being counted correctly (that's only a suspicion though), however what I am certain of is that there is a very large discrepancy with the unicast traffic counts.Is this OID the correct one to be using for this switch? 

View 2 Replies View Related

Routers / Switches :: Huawei 523a Router Doesn't Allow IP Camera Port Forwarding?

Jan 17, 2013

I have a Huawei 523a Router at the moment and I'm trying to setup a IP camera.The Router doesnt allow port forwarding, so my question is can I add another Router onto the Huawei router to allow the second one to work my camera

View 10 Replies View Related

Cisco Switches :: Get InterVLan Routing To Work On DF300- 24 Port Switch

Jun 2, 2012

I am trying get inter vlan routing to work on a DF 300 - 24 port switch.  I have an existing company network on 192.168.111.0 and want to create a vlan on 192.168.1.1 that can talk to 192.168.111.0.  I have enabled layer 3 routing on the switch via console and also provided the ip routing command. I have the following VLAN's:
 
VLAN1 - Default 192.168.111.0
 VLAN2 - 192.168.1.0
 
I have enabled DNS and provided my two DNS servers 192.168.111.82 & 192.168.111.212.  I have set the VLAN1 interface to 192.168.111.217 and VLAN2 interface to 192.168.1.1.
 
Ports FE1 - FE15 are set to access ports and assigned to VLAN1 (untagged) 
Ports FE16 - FE24 are set to access ports and assigned to VLAN2 (untagged)
 
I have set a default route for the switch to 0.0.0.0 0.0.0.0 192.168.111.254 (Draytek 2600 router). I have connected a computer (A) to VLAN1 port FE3 and a computer (B) to VLAN2 port FE16.   I have set Computer A default gateway to 192.168.111.217 and its IP address to 192.168.111.94.    I have set Computer B default gateway to 192.168.1.1 and IP to 192.168.1.2.   
 
Computer A has access to Mdaemon, file server via network drives but no internet (cannot ping google) and can ping computer B and RDP onto computer B.
 
Computer B can ping computer A and RDP onto computer A but does not have access to the company network i.e MDaemon, file server etc.   It also cannot access the internet.
 
From the console I can ping [URL]and all ip addresses in the company network i.e. 192.168.111.82 (DNS server).  If I scan computer A wirh wireshark the internet starts working weird!
 
Configuration show below:
 
switch7c0a71#show run
vlan database
vlan 2
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________

[code]....

View 40 Replies View Related

Switch With 2 Uplink Port Incorrectly Used

Jul 6, 2012

Im now in charge of a medium/big size network (around 1200 machines).I found some connection pattern that im not shoure if it is correct.I migth be wrong, but i think this kind of connection would cause a continue RSTP change of topology (confusing about the 'direction' of the route to take), so having some latency period (this pattern of connection can be repeated several times in the whole network).BTW, there is no special configuration in switch A for saiyng that port 50 is not being used as a uplink port.

View 5 Replies View Related

Cisco Switches :: SG500x How Many 10GE Ports Can Be Used For Uplink

Apr 25, 2013

i was checking the datasheet of 500X series and got confused regarding the 10GE uplinks. how many 10GE ports can be used for uplink and which transceiver should be used for 10GE copper uplink? for example, SG500x-24 switch has 24GE ports and 4x10GE uplinks. can i use the 4x10GE ports for uplinks or only 2 ports are for uplink and the rest for stacking?

View 6 Replies View Related

Routers / Switches :: Uplink Ports Used For ISCSI?

Nov 15, 2012

We have a single HP 2810 switch being used for an iSCSI SAN.We want to replace it with dual higher end switches.But we've got another SAN to also setup now - Dell Equallogic PS6010E - that has 10gb iSCSI SFP+ ports.Can the 4 x SFP+ uplink ports on the Dell PowerConnect PCT5548 or the HP 3800-48G-4SFP+ switch be used for just the 10gb iSCSI, while the other 48 handle the 1gb iSCSI?We were told the uplink ports don't have buffering, making them bad ports for iSCSI traffic and only useful as uplinks to another switch.We only need 8 x 10gb ports (4 for 2 servers, and 4 for the Equallogic SAN), so if the above would work, it would probably save us $10,000 from having to buy a separate 24 port dedicated 10gb switch to handle it.

View 5 Replies View Related

Cisco Switching/Routing :: 3750 Stackable Switches Uplink

Nov 14, 2011

If I have two stackable switches one that connects to the 6509 core switch and the other switch does not, do I have to uplink the switch to the other switch so that switch has route to the core switch or because the switches are daisy chain there is not need to cable one switch to to the other switch connected to core switch?

View 6 Replies View Related

Cisco Switches :: SG500-28P Slow Switch Uplink Connectivity

Feb 26, 2013

At our office we have a weird performance problem with the following switches and connectivity:
 
Internet     |
SG300-24 (L3) core switch     (in our server room)
|SG300-10P (L2) access swtich     (in our meeting room)     |
SG500-28P (L3) switch     (in our meeting room)
 
We are building a new computer infrastructure that is connected to the the SG500-28P. As you can see above the SG500-28P in our meeting room has an uplink to the SG300-10P in the same meeting room. And again the SG300-10P has and uplink to the SG300-24 in our server room. From the server room, there is connectivity to internet. The network uses a multiple VLAN's and routeing between them. Bootom line is, the internet VLAN ID 10 is tagged to trunk ports and available on the SG500-28P. So client get connected straight into the internet based VLAN.
 
The performance on the SG500-28P switch itself from VLAN to VLAN is very fast. But... the uplink connection tot the internet and other VLAN's on the core switch are very and very slow! At least 10 times slower than normal. So if I plug a laptop in the SG500-28P and go from uplink to uplink, it is slow! But... when I connect the same laptop to the SG300-10P the connection with only one uplink it is fast. As if three switches is to much. I can't figure out why.

View 2 Replies View Related

Cisco Switching/Routing :: 3750 - Fiber Uplink Between Switches

Nov 3, 2011

I have three switches:
 
primary - Cisco Catalyst 3750G-24TS-24
and two SG300-28
 
I need to apply uplinks as follows:
 
3750G-24TS-24 SFP (1) -> SG300-28 (first) mini-GBIC (1)3750G-24TS-24 SFP (2) -> SG300-28 (second) mini-GBIC (1)SG300-28 (first) mini-GBIC (2) -> SG300-28 (second) mini-GBIC (2) 
 
I would like to know, What type of mini-GBIC and SFP and cable I should use for SX Multimode?What max speed rate I will get?  

View 8 Replies View Related

Cisco Switching/Routing :: 3560E Switch - Uplink Port

Jun 17, 2012

I implemented the 3560E switch, this one have two Giga bit ethernet/10-Gigabit Ethernet module slots. I used the Twin Gig Converter Modules and one SFP. All configuration was applied in the Ten Giga bit, however the interface giga bit ethernet is UP UP state and the Ten giga down down.

View 3 Replies View Related

Cisco Switching/Routing :: 3750X Switches Dropping Packets On Uplink Interface?

May 9, 2013

We have a remote site that is using 3750X switches as layer 2 switches back to our home site.  The uplink port is showing dropped packets but the utilization on the link is never about 10%.  We have a 100Mb circuit to this site.  Our speed tests and iperf tests are not showing any issues that we can see.  However the port is still droping packets.  It is not dropping at a high rate but they are dropping.          
  
switch#sh platform port-asic stats drop gi1/1/4
  Interface Gi1/1/4 TxQueue Drop Statistics    Queue 0      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 1      Weight 0 Frames 52876      Weight 1 Frames 2      Weight 2 Frames 0    Queue 2      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 3      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 1330874    Queue 4      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 5      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 6      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0    Queue 7      Weight 0 Frames 0      Weight 1 Frames 0      Weight 2 Frames 0switch#
         
Is there a way to capture these dropped packets to see what they are?  We do have VOIP phones at the site and are using Qos.

View 5 Replies View Related

Cisco Switches :: SG300-28 Uplink To Another SG300-28?

Feb 8, 2012

Can I connect a single Cat5e cable between two SG300-28 and link them?  If so what must I configure?

View 1 Replies View Related

VPN Doesn't Work Properly?

Jan 11, 2011

I have an problem with VPN connection on notebooks. Sometimes the VPN connection works perfectly, and other times it just doesn't work at all.The Cisco VPN client software is version 5.0.04.0300. Operating system is Windows XP Prof SP2.When the connection fails, the client statistics window shows "Bytes Received: 0".Rebooting the system, has no effect

View 1 Replies View Related

New Share Doesn't Work

Jan 27, 2011

Normally, when one right clicks on a drive letter having opened 'My computer', then select 'Sharing' there is a warning about sharing a whole disk and the option to accept anyway.One laptop doesn't offer that. It just shows the admin share of C$ immediately. If I choose 'New' at the bottom of the panel a new drive letter and drive name can be entered but it can never be accessed over the network! It shows up in the workgroup but I get a network error 'Network path not found' if I try to access it. I can ping the laptop from anywhere by name and IP address.The laptop can access all the other PCs without any problem.

View 12 Replies View Related

Cisco :: LMS 4.2 Syslog Collector Doesn't Work

May 21, 2013

my LMS 4.2, syslog collector on LMS doesnt working even service syslog collector running normaly and also i saw in syslog_info is working to collect syslog from all router but not show up in dashboard monitoring.I have setting on every router to logging (ip address LMS) but on LMS no any syslog from router can collect.i did a selftest from LMS there are all PASS except nslookup fail, it is has relation with syslog not show up on dashboard?

View 5 Replies View Related

Cisco Wireless :: Air-AP1142-e-k9 Doesn't Work With 802.11n?

Jun 29, 2012

I bought cisco AP (air-ap1142-e-k9) and we know this ap works with 802.11a/g/n same the description note on the package cartoon but my problem is when i configure that ap its work only with 802.11a/g i tries to make it works with 802.11n but fail .

View 3 Replies View Related

Cisco WAN :: 881 3G Won't Work - Doesn't Receive IP Address

Jan 26, 2011

I'm trying to configure Cisco CISCO881G-K9 3G router to connect to mobile network without success. The cellular interface gets up but it doesn't receive IP address. It seems that profile isn't activated and it should've been.
 
I've attached running config and some other information gathered from router.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved