Cisco Switching/Routing :: 4500 Sup7E Show Controllers Ethernet Output

I recently configured a network with a 4500 Sup7E and a 3560G with jumbo frame support.  I am trying to confirm operation.  On the 4500 this is straight forward using "sho int g0/nn count detail".  [code] The 3560 doesn't support that command.  The closest I can come to finding the number of jumbo packets is "show controllers ethernet" (example below).  On the transmit side I assume that jumbo frames would be tallied in the "Too large frames" counter.  The receive side is a little more ambiguous.  There are 2 counters that seem to be duplicates, "Valid frames, too large" and "Valid oversize frames".  In operation they are not. I am seeing the "Valid frames, too large" counter incrementing while the "Valid oversize frames" remains at zero. [code]