Cisco Switching/Routing :: WS-C3750G-24T-S / Configure Independent Routes For A Specific Network

I have a  WS-C3750G-24T-S layer 3 switch and I need to configure independent routes for a specific network, I'm trying to use VRF but it is not working for me. I tried using route-map but it seems the switch doesn't support that, so I'm stuck with VRF, but I think I'm not doing it right. The topology is as follows:
 
I have a network directly connected to a vlan and I need to forward all the traffic I get on this VLAN using a tunnel to a router. I think the problem is that in order to use the tunnel I need to utilize another VLAN which isn't part of that VRF. I attach the configuration I'm using to better understand what I'm trying to do:
 
layer-3 switch:
 
ip vrf TEST
rd 1:1 
interface Tunnel1
ip vrf forwarding TEST
ip address 172.17.0.1 255.255.255.252
tunnel source 10.245.0.9
tunnel destination 10.250.4.31

[Code]....

And this is how my routing table looks on this router:
 
     172.17.0.0/30 is subnetted, 1 subnets
C  172.17.0.0 is directly connected, Tunnel4
C  10.250.4.0/24 is directly connected, Vlan404
S   10.245.0.8/29 [1/0] via 10.250.4.1
S*   0.0.0.0/0 [1/0] via 10.1.60.15