Cisco VPN :: RV042 Router / ASA 5505 - Connection From Outside
Sep 26, 2012
I have a RV042 VPN Router inside an ASA 5505 running version 7.2. I am attempting to connect from the outside to the RV042. I have read for 2 days now and tried everything I have found and had no success. I can connect from inside the network to the RV042 so I know that is setup correctly. I have found links on several posts to the official Cisco support documents but they make no sense to me. This is my first experience with a Cisco Firewall.
We also have a security camera network that we access externally and I have successfully set up the port forwarding for this. Here is my current running configuration. The inside ip address of the RV042 is 192.168.168.25. I had port 1723 forwarded, opened GRE, and have setup PPTP inspection. I have deleted the port forwarding at this point.
Result of the command: "show running-config"
: Saved
ASA Version 7.2(3)
hostname suite
domain-name hivermont.com
enable password vwiH3D2KQdqR57As encrypted names
interface Vlan1 name if inside
security-level 100
ip address 192.168.168.1 255.255.255.0
ospf cost 10
[code].....
View 4 Replies
ADVERTISEMENT
Feb 8, 2011
we do have 2 Rv042, one in my office and one in my house.. in the office we do have static ip and at home none.. question is can i connect the two RV042?
View 1 Replies
View Related
Mar 22, 2011
I have some problems in my network with Gateway to Gateway Vpn Connection using two Rv042 routers.
I cannot ping the computers with static ip configuration.
In local an remote computers who have DHCP ip configuration i can ping each other .
View 1 Replies
View Related
Oct 25, 2012
Shopping for a new home router/firewall. Trying to decide between a Cisco ASA 5505 or a juniper equivalent. What are everyone's thoughts?
View 16 Replies
View Related
Dec 5, 2012
Connecting the sip trunk provider modem and my network on the rv042 and connect my phone system on it so he can access both my sip trunk and internet connection.
I have 1 WAN modem from my sip trunk provider connected to the first WAN interface in the RV042.My network is connected to the second WAN interface programmed as a transparent bridge to link both lan segments together
however the link between the WAN2 interface and the network seems to go up and down and i cant ping my network gateway from a pc connected to the switchport of the RV042.
all i need is internet access to the phone system for email notification via a SMTP server.
View 1 Replies
View Related
May 31, 2012
I have successfully connected two RV042s to establish a VPN gateway to VPN gateway connection. I have the follow questions:
1. I would like to keep the VPN tunnel connection time indefinite. Is it sufficient by checking the "Keep-Alive" box on the VPN -> Gateway To Gateway -> Advance page? Or, I have to ping the RV042 periodically?
2. Do the "Phase 1/Phase 2 SA Life Time" (on VPN -> Gateway To Gateway page) settings have any impact on keeping the VPN connection time indefinite? What are the optimal values for them?
3. Is there an API, command, or script to replace a manual clicking on the "CONNECT" button to establish the VPN tunnel from the VPN -> Summary page? Or, is there a way to accomplish this at power up?
4. Is there a way to establish a VPN tunnel without going through login and clicking the "CONNECT" button? (Auto connect at power up?)
View 3 Replies
View Related
Oct 23, 2011
I have 2 WAN connection @ my office. One is the static IP from Reliance Network
The other connection of WAN is dynamic from AIR TEL...
When i logged into my router. I can see the dynamic IP from Reliance on WAN1 status. But on WAN2 is see everything as 0.0.0.0. The WAN2 configuration has been set to get the IP automatically...
I tried the other solution offered by one of the support guys, by turning on and off the modem, but that does not work...
Or do i need to change the WAN2 connection to be PPoE or something...
View 4 Replies
View Related
Dec 20, 2011
How can I configure VPN connection between Cisco RV042 and Fritz!box 7170?I can establish VPN channel with Linksys RV042 with firmware 1.3.12.6-tm. When I set the same setting to Cisco RV042 (firmware v4.0.2.08-tm) VPN channel is not established.
View 1 Replies
View Related
Jul 4, 2012
I have an issue with Cisco RV042 i have two Internet access connection from my ISP one with 30Mbps and the other with 8Mbps.
i have 30Mbps in WAN1 and 8Mbps on WA2
my issue that i was connecting both of the WAN connections using DHCP mode and it was working fine and the ISP modem was terminating the PPPOE
now i decided to use PPPOE on the Cisco RV042 and change the ISP modem to bridge mode.
WAN1 is working were as WAN2 is not working.
i tried to factory reset, shift links, in all cases WAN2 if its on PPPOE does not go up.
i am using latest firmware from cisco.com.
View 4 Replies
View Related
Nov 1, 2011
My network consists of the following:
Office-RV042 with static IP ->SBS2003 (10.10.10.5/ 255.255.255.0)
Remote: BEFSR41 with Dynamic -> XP sp3 VPN client (192.168.3.x/ 255.255.255.248)
Within the RV042 I have enabled the PPtP server and assigned a user. No port forwarding enabled. All VPN passthroughs and firewall is enabled. DHCP server is disabled.I can establish a connection to the rv042 and ping PCs including the sbs domain server on the office side but am unable to browse any folders. When I attempt to access a network folder located on the office server I am prompted for a username/ password. Upon entering my domain credentials I get an error stating: "the user name you typed is the same user name you logged in with. That user name has already been tried. A domain controller cannot be found to verify that user name"
View 2 Replies
View Related
Nov 19, 2012
I have an RV082 and a RV042. I have been able to successfully establish a gateway to gateway vpn connection between them both, but both Routers unable to ping each other and I can't remotely administer each router through the VPN connection.
View 1 Replies
View Related
Sep 4, 2011
At this moment I'm trying to connect 2 router rv042 and i received the following error message
(g2gips0) #23: ERROR: asynchronous network error report on eth1 for message to 190.199.164.144 port 500, complainant 190.199.164.144: Connection refused [errno 146, origin ICMP type 3 code 3 (not authenticated)]
in the other router i don't see any error . what would be the problem.
View 5 Replies
View Related
Dec 18, 2011
We're getting "Connaction Timeout / Connection Failure" error messages several time per day. Here is our setup:
Verizon FiOS Internet (ONT Box) --> Cisco ASA 5505 --> EdgeMarc 4500 Router --> Cisco 300-24G Switch --> Dell PE1950 Servers
From past few months, we keep getting Connection Timeout and Connection Failure error messages in our vendor application which connects to SQL Server 2005. Also Terminal Server 2003 keep disconnecting for every few hours.After several days of troubleshooting, we come to know that this Cisco ASA 5500 is not working properly. When I access the ASDM, it shows several warning messages.I know there is a setting option to configure TimeOut, but is there anyway to test and track the ASA 5500 regarding this Timeout issues?
View 3 Replies
View Related
Nov 15, 2010
So here is my issue. I have two sites, each with a Linksys RV042 on thier site.
Site 1:
External: 142.142.142.142
Internal: 192.168.25.0/24
Site 2:
External: 143.143.143.143
Internal: 192.168.26.0/24
We have setup a site-to-site VPN between these sites, and all traffic is running back and forth without isse.
At Site 1 we have configured the Client VPN for use with the QuickVPN software. Again, for site 1, this is not an issue. We are able to access all internal resources at Site 1 without issue (expect for some DNS related problems).
The problem that we have is attempting to access Site 2 resources via the QuickVPN connection at Site 1. Even though they are not suppose to exist, we are able to ping 192.168.26.1-6 (which are ghost addresses likely created by the RV042's) but no actual systems on at Site 2.
I have added the Client VPN connection at Site 2, but it has the same problem accessing resources at Site 1.
View 6 Replies
View Related
Jun 25, 2012
I am trying to confgure a VPN connection on a Cisco ASA 5505, and I am supposed to translate the inside network from 10.200 76.0 to host 10.1.4.204, and then from that scheme establish a VPN with the host 66.179.80.108 on network 192.168.50.0/24. I was told that this Cisco ASA appliace would be able to translate the network address as a mask in order to make the necessary connection with the other site connection.
View 6 Replies
View Related
Jul 18, 2011
Im able to create a gateway tunnel with two rv042 routers in different locations ( i can see the tunnel connected in the router) but the quick vpn utility is not working , i also tried to use the pptp as server as an alternative( im able to connect using windows connection to the pptp server but whenever I browse any of the four ip's allowed for the pptp server \10.0.0.200-204 it takes me to the documents of the local computer....I attached the configuration for one of the routers it is the same as the other end , just the information is flipped.
Message was edited by: Adrian Torres
View 7 Replies
View Related
Feb 28, 2012
I have an L2L VPN setup between two ASA 5505's. I can communicate across the VPN from either site without an issue. I'd like to be able to grant RA VPN users access to both LAN's but I'm not certain how to proceed (or if it's possible). I have split tunneling setup, and I've added both LAN subnets in the ACL. When I connect to either ASA via RA VPN, I can ping any host on the local subnet behind that ASA. However, when I try to ping hosts on the other side of the L2L VPN, it fails. I'm not sure if I have an ACL setup wrong, or if it's simply not possible.
View 4 Replies
View Related
Feb 14, 2012
We have successfully connected the pix501 and asa 5505 firewallls using ipsec vpn.the firewalls and servers and beeing shutdown after office hours.the problem is everytime we turn on the firewalls, we need to do "ping" on vpn inorder to establish vpn connection with the two firewalls.After doing a ping command. The VPN connection between firewalls is established.we us vpdn to create a tunnel to the asa firewall.
View 3 Replies
View Related
Dec 10, 2011
i want to connect to asa 5505 (office 1) using vpn from ASA 5510(office 2)...The network guy in office 1 has asked me to setup ASA 5510 has hardware client mode.
i have the following details from office 1
host peer address of office 1 : A.B.C.D,
phase 1 encryption : DES
phase 1 Authen : SHA
Diffie helman : group 2
Groupname : MNC
IP Schema remote site network : 170.31.0.0 255.255.0.0
password : Cisco$123
In asa 5510 ,
ASA Version 8.2(5)!hostname CISCOASAenable password 5EpARJwwtf4VFC9S encryptedpasswd 5EpARJwwtf4VFC9S encryptednames!interface Ethernet0/0nameif outsidesecurity-level 0pppoe client vpdn group DADAip address pppoe setroute!interface Ethernet0/1nameif insidesecurity-level 100ip address 192.168.10.1 255.255.255.0!interface Ethernet0/2shutdownno nameifno security-levelno ip address!interface Ethernet0/3shutdownno nameifno security-levelno ip address!interface Management0/0nameif managementsecurity-level 100ip address 192.168.1.1 255.255.255.0management-only!ftp mode passiveaccess-list 124 extended permit esp any anypager lines 24logging asdm informationalmtu outside 1500mtu inside 1500mtu management 1500icmp unreachable rate-limit 1 burst-size 1no asdm history enablearp timeout 14400global (outside) 1 interfacenat (inside) 1 0.0.0.0 0.0.0.0timeout xlate 3:00:00timeout conn 1:00:00 half-closed 0:10:00 udp
[code]......
What more i need to add to get the vpn connected with ASA 5510?
View 1 Replies
View Related
Apr 4, 2011
I am wondering if this Cisco ASA 5505 Box is overkill for what I need?I have just become network admin to a small office that host two domains.
[code]...
Some of the clients are requesting a connection to the office from remote locations for file access and what not. So would implementing a Cisco ASA 5505 be overkill? I am a bit nervous of going forward as I have never had to "setup" an ASA box and dont want to kill the network.If I should NOT use this box, what should I use for a VPN connection?
View 6 Replies
View Related
Feb 13, 2012
I have the asa 5505 with asdm 6.4(5). my inside LAN is 192.168.0.0/24. the outside of asa is connected on lan 10.13.74.0/24 and i need over LAN 10.13.74.0/24 connect on LAN 10.15.100.0/24. i put nat rule on asa 5505 and acl rule and users from lan 10.15.100.0/24 can connect on my server, but i can't connect on from inside of asa connect on lan 10.15.100.0/24 and 10.13.74.0/24. my configuration asa is Result of the command:
"show running-config"
: Saved
:
ASA Version 8.4(2)
!
host name Cisco asa
enable password 8Ry2YjIyt7RRXU24 encrypted
password 2KFQnbNIdI.2KYOU encrypted
names
[ code]....
what i do that connect on LAN 10.15.100.0/24. i cant ping my outside interface, put rules on acl, i enabled service policy rule for icmp ,but nothing.
View 3 Replies
View Related
May 23, 2011
I am trying to configure a Cisco ASA 5505 for Remote Clients.I am using ASDM interface and used the startup and ipsec wizards for my configuration but im hitting a stumbling block.For the last 2 days i have tried a number of configuration changes in attempt to make this work but failed, so i have done a factory reset and gone through the wizards again, so i have a clean configuration. Currently i have a Static Public IP Address 81.137.x.x and i am using a Netgear ADSL router, which is forwarding VPN traffic (UDP 500) to 192.168.171.35 (the wan port on the ASA 5505).The Cisco ASA has a default address of 192.168.1.1 I am using Cisco Client 5.0.06.0160.I have configured the client to use Group Authentication with the same credentials as setup through the wizard and im using Transparent Tunneling IPSec over UDP.I have attached 2 documents running_config.txt - which is shows the current ASA configuration Log-View.txt - showing error messages displayed in the real-time log viewer when i try to connect from the remote client.Im not sure whether i need to do any additional configurations for my setup other than simply run the wizards.
View 3 Replies
View Related
Feb 3, 2011
Im using a Cisco ASA 5505 at the head end and the Cisco VPN client 5.0.06.0160 on the client side.
In the VPN Client logs it authenticates, grabs an IP, DNS and domain info and then drops the connection.
Code...
View 2 Replies
View Related
Feb 12, 2012
I'm trying to get IPSec VPN working onto a new Cisco ASA5505. Pretty standard configuration.Setup:
* Cisco VPN client on Windows 7 (v5.0.07.0290 x64 on Laptop1 and v5.0.07.0440 x64 on Laptop2)
* PPPoE/NAT and internal DHCP on the ASA were configured with the Startup Wizard in ASDM
NATting is working fine - internal PCs get an IP address in the 192.168.2.0/24 range and can all access the Internet.I wanted to be able to connect from anywhere to the ASA in order to reach one of the internal servers. Should be pretty basic.First I tried with the built-in ASDM IPSec Wizard, instructions found here.VPN clients can connect to the ASA, are connected (until they're manually disconnected), but cannot reach the internal network nor the Internet. Note VPN client can connect fine to a different VPN site (not administered by myself). [code]
Unfortunately I'm getting the same "AddRoute failed to add a route with metric of 0: code 160" error message.I'm very confused as this should be a pretty standard setup. I tried to follow the instructions on the Cisco site to the letter...The only "differences" in my setup are an internal network of 192.168.2.0 (with ASA IP address 192.168.2.254) and PPPoE with DHCP instead of no PPPoE at all.
View 5 Replies
View Related
Jan 28, 2010
I'm on my first configuration of a Cisco firewall. I'm trying ASA 5505 using Cisco ASDM 5.2 (not GUI). I configured Vlan1 (inside) and Vlan2(outside) and all seems to work correctly. Network clients can use Internet and ping internal LAN. But I've some problems with vpn and other services: 1. when I try to connect to external VPN server the connection procedure stopped in username/password validation (if I try directly, without firewall ASA, there's no problem) 2.I've problems also to see external security cam working trough a web server. I open port 1723 - 500 and GRE. What can I do more?
View 4 Replies
View Related
Mar 30, 2012
I created three different Remote VPN connections with three different networks . i can make them one but for some reasons i don't mix all.and iam using Cisco asa 5505 with Shrew Soft VPN software , so my problem is,- i connected Shrew soft remote vpn , if i try to connected another remote vpn connection this will not accept the second connection, any remote vpn connection software that accepts more than one connection
View 1 Replies
View Related
Feb 15, 2011
We recently got a 10 meg dedicated internet fiber connection installed. I connected it to a PIX 501 firewall and everything worked fine (I tested it for a couple of weeks). A couple of days ago I got a new ASA 5505 and replaced the PIX with this device. It works, but every so often there seems to be a timeout when surfing the web whereby I click on a link and there is up to a 45 second wait and then the page loads quickly. I was not getting this before on the PIX so I'm assuming it's not a latency issue with the connection. I am the only one using this connection on the network so it's not to say that it's being bogged down. I want to roll this out to the other users on the network but not when this is happening. The configuration is below:
: Saved
:
ASA Version 8.2(1)
!
hostname ciscoasa
[Code].....
View 8 Replies
View Related
Aug 29, 2011
I have created a Remote VPN connection on a Cisco ASA 5505.When I'm connected remotely through the Cisco VPN Client my connection is very slow.I have a response time of 220ms when I ping my server. how to improve the speed of the VPN connection?
View 1 Replies
View Related
Apr 15, 2013
I have a SIP trunk in my Florida office connected to a Cisco 2851 ISR. I'm using Unified Communications Manager 8.0 and life is great.
We just opened a new office in Spain and now the fun begins. We created a site-to-site VPN tunnel using ASA 5510 in Florida and ASA 5505 in Spain. We can register IP Commuicator phones in Spain but when they make calls it shows up as a Florida call. We need it to show up as a Spain call.
We are thinking to get a SIP trunk into the Spain office but I only have a ASA 5505 over there. Can I terminate a SIP connection to it? Is this the best option? If not, what is the recommened setup?
View 1 Replies
View Related
Nov 13, 2012
I am having a problem with a ASA 5505. The users on the inside cannot access internet for the most of the time. When i looked over the configuration and tried a few changes i got out to internet about 5 seconds every 30 minute or so. Very strange. When i try to access internet i just get the windows post that DNS is not working properly. As you can see in my config i get all addresses dynamic from ISP.
I am not sure what to do next, i tried to set static routes, make Nat changes, static dns addresses, searching this forum but nothing works. It seems like there is a ISP problem but i have talked to the support twice today and they say that all is fine from their side. Does ASA behave like this?
ASA Version 8.2(2)
hostname ciscoasa
domain-name
enable password encrypted
passwd encrypted
names
[code]...
View 7 Replies
View Related
Jun 23, 2012
I have a Cisco ASA 5505 - 50 VPN edition. I have baffling network issues that I have not been able to pinpoint and I recently started to think it may have something to do with my ASA. I'm a network administrator and I have a Cisco ASA 5505 in my home network so I can learn how to manage Cisco ASA's and utilize the Easy VPN feature so I have a always on VPN connection into work to log into servers, etc. I've been using the ASA for almost 6 months with the EasyVPN feature with no issues. My ISP is Comcast.
Within the last week my connections have been randomly dropping for about 20 seconds and then reconnecting. I have two computers on the network that have a direct ethernet run to the switch ports on the back of the ASA. When the connection drops, I see my LAN icons completely lose connectively (yellow exclamation warning) then after 20 seconds, reconnect. This is very random. I was able to get it to happen every time I connected to XBOX live and play a online game. It would almost on cue drop after 30 minutes of online gamming. Here are the steps I have taken:
1. Replaced 10/100 switch to a brand new 10/100/1000 switch from computer run in my office to the ASA.
no joy
2. I upgraded the ASA to the most recent firmware: ASA Version 8.4, ASDM Version 6.4
no joy
3. I had an ethernet run under my carpet to the office, I started to think that maybe one of the cables had an issue after walking on it and vacumming causing a short. I removed all the ethernet under the carpet and installed power line over ethernet adapter from the ASA to my office.
no joy
4. I checked both computers on the network for viruses. All computers came back clean after scanning wth Malwarebytes and SuperAntispyware.
5. I've watched the logs on the ASA as the LAN connection drops and I don't see error messages to troubleshoot this issue.
The only thing left to replace is the Comcast modem or the Cisco ASA. The Comcast modem is newer and only about 1 year old (rented from Comcast). Since my actual LAN connection drops and I lose connectively I believe there may be some issue with the ASA or the ASA switch ports or some sort of internal hardware issue on the ASA.
View 4 Replies
View Related
Jun 24, 2012
I'm trying to get an asa5505 set up so that our web server can send an LDAPS login to a client's server and receive the request back. The default IP our traffic goes out on is different than where I want the connection to come back in on. So, I set a NAT rule to send all traffic from a specific inside IP out a default outside IP. I also allowed LDAPS traffic from the client's server IP address in and have nat'd it back to the appropriate inside IP address. It seems to build the outbound connection fine, but then seems to drop it right away, which then seems to not allow the response back in. I've attached a picture of the log, with (what I think are) the lines in question highlighted. I'm far from a routing expert, but this seemed like a fairly easy setup.
View 1 Replies
View Related
Jun 23, 2012
I have configured 2 RV042 VPN with different ISP. Tunnel connected successfully and i can ping each other router but i can access clients which are connected to router. I have added rules also in firewall.
View 1 Replies
View Related
