Cisco VPN :: VPN Connection Between Pix 501 And ASA 5505?

Feb 14, 2012

We have successfully connected the pix501 and asa 5505 firewallls using ipsec vpn.the firewalls and servers and beeing shutdown after office hours.the problem is everytime we turn on the firewalls, we need to do "ping" on vpn inorder to establish vpn connection with the two firewalls.After doing a ping command. The VPN connection between firewalls is established.we us vpdn to create a tunnel to the asa firewall.

View 3 Replies


ADVERTISEMENT

Cisco Firewall :: ASA 5505 - Connection Timeouts / Connection Failures

Dec 18, 2011

We're getting "Connaction Timeout / Connection Failure" error messages several time per day. Here is our setup:
 
Verizon FiOS Internet (ONT Box) --> Cisco ASA 5505 --> EdgeMarc 4500 Router --> Cisco 300-24G Switch --> Dell PE1950 Servers
 
From past few months, we keep getting Connection Timeout and Connection Failure error messages in our vendor application which connects to SQL Server 2005. Also Terminal Server 2003 keep disconnecting for every few hours.After several days of troubleshooting, we come to know that this Cisco ASA 5500 is not working properly. When I access the ASDM, it shows several warning messages.I know there is a setting option to configure TimeOut, but is there anyway to test and track the ASA 5500 regarding this Timeout issues?

View 3 Replies View Related

Cisco VPN :: 5505 Make Necessary Connection With Other Site Connection

Jun 25, 2012

I am trying to confgure a VPN connection on a Cisco ASA 5505, and I am supposed to translate the inside network from 10.200 76.0 to host 10.1.4.204, and then from that scheme establish a VPN with the host 66.179.80.108 on network 192.168.50.0/24. I was told that this Cisco ASA appliace would be able to translate the network address as a mask in order to make the necessary connection with the other site connection.

View 6 Replies View Related

Cisco VPN :: ASA 5505 - No Connection Across L2L On RA?

Feb 28, 2012

I have an L2L VPN setup between two ASA 5505's. I can communicate across the VPN from either site without an issue. I'd like to be able to grant RA VPN users access to both LAN's but I'm not certain how to proceed (or if it's possible). I have split tunneling setup, and I've added both LAN subnets in the ACL. When I connect to either ASA via RA VPN, I can ping any host on the local subnet behind that ASA. However, when I try to ping hosts on the other side of the L2L VPN, it fails. I'm not sure if I have an ACL setup wrong, or if it's simply not possible.

View 4 Replies View Related

Cisco VPN :: ASA 5510 Connection To ASA 5505?

Dec 10, 2011

i want to connect to asa 5505 (office 1) using vpn from ASA 5510(office 2)...The network guy in office 1 has asked me to setup ASA 5510 has hardware client mode.

i have the following details from office 1
host peer address of office 1 :  A.B.C.D,
phase 1 encryption : DES
phase 1 Authen : SHA
Diffie helman : group 2
Groupname : MNC
IP Schema remote site network : 170.31.0.0 255.255.0.0
password : Cisco$123
 
 In asa 5510 ,
 
ASA Version 8.2(5)!hostname CISCOASAenable password 5EpARJwwtf4VFC9S encryptedpasswd 5EpARJwwtf4VFC9S encryptednames!interface Ethernet0/0nameif outsidesecurity-level 0pppoe client vpdn group DADAip address pppoe setroute!interface Ethernet0/1nameif insidesecurity-level 100ip address 192.168.10.1 255.255.255.0!interface Ethernet0/2shutdownno nameifno security-levelno ip address!interface Ethernet0/3shutdownno nameifno security-levelno ip address!interface Management0/0nameif managementsecurity-level 100ip address 192.168.1.1 255.255.255.0management-only!ftp mode passiveaccess-list 124 extended permit esp any anypager lines 24logging asdm informationalmtu outside 1500mtu inside 1500mtu management 1500icmp unreachable rate-limit 1 burst-size 1no asdm history enablearp timeout 14400global (outside) 1 interfacenat (inside) 1 0.0.0.0 0.0.0.0timeout xlate 3:00:00timeout conn 1:00:00 half-closed 0:10:00 udp

[code]......
 
What more i need to add to get the vpn connected with ASA 5510?

View 1 Replies View Related

Cisco :: ASA 5505 - Setting A VPN Connection

Apr 4, 2011

I am wondering if this Cisco ASA 5505 Box is overkill for what I need?I have just become network admin to a small office that host two domains.

[code]...

Some of the clients are requesting a connection to the office from remote locations for file access and what not. So would implementing a Cisco ASA 5505 be overkill? I am a bit nervous of going forward as I have never had to "setup" an ASA box and dont want to kill the network.If I should NOT use this box, what should I use for a VPN connection?

View 6 Replies View Related

Cisco Firewall :: ASA 5505 - Connection To LAN

Feb 13, 2012

I have the asa 5505 with asdm 6.4(5). my inside LAN is 192.168.0.0/24. the outside of asa is connected on lan 10.13.74.0/24 and i need over LAN 10.13.74.0/24 connect on LAN 10.15.100.0/24. i put nat rule on asa 5505 and acl rule and users from lan 10.15.100.0/24 can connect on my server, but i can't connect on from inside of asa connect on lan 10.15.100.0/24 and 10.13.74.0/24. my configuration asa is Result of the command:

"show running-config"
 : Saved
:
ASA Version 8.4(2)
!
host name Cisco asa
enable password 8Ry2YjIyt7RRXU24 encrypted
password 2KFQnbNIdI.2KYOU encrypted
names
[ code]....
 
what i do that connect on LAN 10.15.100.0/24. i cant ping my outside interface, put rules on acl, i enabled service policy rule for icmp ,but nothing.

View 3 Replies View Related

Cisco VPN :: ASA 5505 Ipsec Vpn Connection Fail?

May 23, 2011

I am trying to configure a Cisco ASA 5505 for Remote Clients.I am using ASDM interface and used the startup and ipsec wizards for my configuration but im hitting a stumbling block.For the last 2 days i have tried a number of configuration changes in attempt to make this work but failed, so i have done a factory reset and gone through the wizards again, so i have a clean configuration. Currently i have a Static Public IP Address 81.137.x.x and i am using a Netgear ADSL router, which is forwarding VPN traffic (UDP 500) to 192.168.171.35 (the wan port on the ASA 5505).The Cisco ASA has a default address of 192.168.1.1 I am using Cisco Client 5.0.06.0160.I have configured the client to use Group Authentication with the same credentials as setup through the wizard and im using Transparent Tunneling IPSec over UDP.I have attached 2 documents running_config.txt - which is shows the current ASA configuration Log-View.txt - showing error messages displayed in the real-time log viewer when i try to connect from the remote client.Im not sure whether i need to do any additional configurations for my setup other than simply run the wizards.

View 3 Replies View Related

Cisco VPN :: ASA 5505 - VPN Authenticates / Drops Connection

Feb 3, 2011

Im using a Cisco ASA 5505 at the head end and the Cisco VPN client 5.0.06.0160 on the client side.
 
In the VPN Client logs it authenticates, grabs an IP, DNS and domain info and then drops the connection.
 
Code...

View 2 Replies View Related

Cisco VPN :: ASA 5505 VPN Connection Unable To Add Route

Feb 12, 2012

I'm trying to get IPSec VPN working onto a new Cisco ASA5505. Pretty standard configuration.Setup:

* Cisco VPN client on Windows 7 (v5.0.07.0290 x64 on Laptop1 and v5.0.07.0440 x64 on Laptop2)
* PPPoE/NAT and internal DHCP on the ASA were configured with the Startup Wizard in ASDM
 
NATting is working fine - internal PCs get an IP address in the 192.168.2.0/24 range and can all access the Internet.I wanted to be able to connect from anywhere to the ASA in order to reach one of the internal servers. Should be pretty basic.First I tried with the built-in ASDM IPSec Wizard, instructions found here.VPN clients can connect to the ASA, are connected (until they're manually disconnected), but cannot reach the internal network nor the Internet. Note VPN client can connect fine to a different VPN site (not administered by myself). [code]

Unfortunately I'm getting the same "AddRoute failed to add a route with metric of 0: code 160" error message.I'm very confused as this should be a pretty standard setup. I tried to follow the instructions on the Cisco site to the letter...The only "differences" in my setup are an internal network of 192.168.2.0 (with ASA IP address 192.168.2.254) and PPPoE with DHCP instead of no PPPoE at all.

View 5 Replies View Related

Cisco VPN :: ASA 5505 First Configuration - No Connection With External VPN

Jan 28, 2010

I'm on my first configuration of a Cisco firewall. I'm trying ASA 5505 using Cisco ASDM 5.2 (not GUI). I configured Vlan1 (inside) and Vlan2(outside) and all seems to work correctly. Network clients can use Internet and ping internal LAN. But I've some problems with vpn and other services: 1. when I try to connect to external VPN server the connection procedure stopped in username/password validation (if I try directly, without firewall ASA, there's no problem) 2.I've problems also to see external security cam working trough a web server. I open port 1723 - 500 and GRE. What can I do more?

View 4 Replies View Related

Cisco VPN :: 5505 Dual Remote VPN Connection

Mar 30, 2012

I created three different Remote VPN connections with three different networks . i can make them one but for some reasons i don't mix all.and iam using  Cisco asa 5505 with Shrew Soft VPN software , so my problem is,- i connected Shrew soft remote vpn , if i try to connected another remote vpn connection this will not accept the second connection, any remote vpn connection software that accepts more than one connection

View 1 Replies View Related

Cisco Firewall :: Connection Timeouts On ASA 5505

Feb 15, 2011

We recently got a 10 meg dedicated internet fiber connection installed. I connected it to a PIX 501 firewall and everything worked fine (I tested it for a couple of weeks). A couple of days ago I got a new ASA 5505 and replaced the PIX with this device. It works, but every so often there seems to be a timeout when surfing the web whereby I click on a link and there is up to a 45 second wait and then the page loads quickly. I was not getting this before on the PIX so I'm assuming it's not a latency issue with the connection. I am the only one using this connection on the network so it's not to say that it's being bogged down. I want to roll this out to the other users on the network but not when this is happening. The configuration is below:
 
: Saved
:
ASA Version 8.2(1)
!
hostname ciscoasa

[Code].....

View 8 Replies View Related

Cisco VPN :: ASA 5505 / Remote VPN Connection Slow

Aug 29, 2011

I have created a Remote VPN connection on a Cisco ASA 5505.When I'm connected remotely through the Cisco VPN Client my connection is very slow.I have a response time of 220ms when I ping my server. how to improve the speed of the VPN connection?

View 1 Replies View Related

Cisco VPN :: RV042 Router / ASA 5505 - Connection From Outside

Sep 26, 2012

I have a RV042 VPN Router inside an ASA 5505 running version 7.2.  I am attempting to connect from the outside to the RV042.  I have read for 2 days now and tried everything I have found and had no success.  I can connect from inside the network to the RV042 so I know that is setup correctly.  I have found links on several posts to the official Cisco support documents but they make no sense to me.  This is my first experience with a Cisco Firewall.
 
We also have a security camera network that we access externally and I have successfully set up the port forwarding for this. Here is my current running configuration.  The inside ip address of the RV042 is 192.168.168.25.  I had port 1723 forwarded, opened GRE, and have setup PPTP inspection.  I have deleted the port forwarding at this point.
 
Result of the command: "show running-config"
 : Saved
ASA Version 7.2(3)
hostname suite
domain-name hivermont.com
enable password vwiH3D2KQdqR57As encrypted names
interface Vlan1 name if inside
security-level 100
ip address 192.168.168.1 255.255.255.0
ospf cost 10
[code].....

View 4 Replies View Related

Cisco Firewall :: Terminate SIP Connection On ASA 5505?

Apr 15, 2013

I have a SIP trunk in my Florida office connected to a Cisco 2851 ISR. I'm using Unified Communications Manager 8.0 and life is great.
 
We just opened a new office in Spain and now the fun begins.  We created a site-to-site VPN tunnel using ASA 5510 in Florida and ASA 5505 in Spain. We can register IP Commuicator phones in Spain but when they make calls it shows up as a Florida call. We need it to show up as a Spain call.
 
We are thinking to get a SIP trunk into the Spain office but I only have a ASA 5505 over there. Can I terminate a SIP connection to it? Is this the best option? If not, what is the recommened setup?

View 1 Replies View Related

Cisco Firewall :: 5505 Drops Outside Connection

Nov 13, 2012

I am having a problem with a ASA 5505. The users on the inside cannot access internet for the most of the time. When i looked over the configuration and tried a few changes i got out to internet about 5 seconds every 30 minute or so. Very strange. When i try to access internet i just get the windows post that DNS is not working properly. As you can see in my config i get all addresses dynamic from ISP.
 
I am not sure what to do next, i tried to set static routes, make Nat changes, static dns addresses, searching this forum but nothing works. It seems like there is a ISP problem but i have talked to the support twice today and they say that all is fine from their side. Does ASA behave like this?

ASA Version 8.2(2)
hostname ciscoasa
domain-name
enable password  encrypted
passwd  encrypted
names
[code]...

View 7 Replies View Related

Cisco Firewall :: ASA 5505 Connection Dropping

Jun 23, 2012

I have a Cisco ASA 5505 - 50 VPN edition.  I have baffling network issues that I have not been able to pinpoint and I recently started to think it may have something to do with my ASA.  I'm a network administrator and I have a Cisco ASA 5505 in my home network so I can learn how to manage Cisco ASA's and utilize the Easy VPN feature so I have a always on VPN connection into work to log into servers, etc.  I've been using the ASA for almost 6 months with the EasyVPN feature with no issues.  My ISP is Comcast.
 
Within the last week my connections have been randomly dropping for about 20 seconds and then reconnecting.  I have two computers on the network that have a direct ethernet run to the switch ports on the back of the ASA.  When the connection drops, I see my LAN icons completely lose connectively (yellow exclamation warning) then after 20 seconds, reconnect.  This is very random.  I was able to get it to happen every time I connected to XBOX live and play a online game.  It would almost on cue drop after 30 minutes of online gamming.  Here are the steps I have taken:
 
1. Replaced 10/100 switch to a brand new 10/100/1000 switch from computer run in my office to the ASA.
no joy
 
2. I upgraded the ASA to the most recent firmware: ASA Version 8.4, ASDM Version 6.4
no joy
 
3. I had an ethernet run under my carpet to the office, I started to  think that maybe one of the cables had an issue after walking on it and  vacumming causing a short.  I removed all the ethernet under the carpet and installed power line over ethernet adapter from the ASA to my office.
no joy
 
4. I checked both computers on the network for viruses.  All computers came back clean after scanning wth Malwarebytes and SuperAntispyware.
 
5. I've watched the logs on the ASA as the LAN connection drops and I don't see error messages to troubleshoot this issue.
 
The only thing left to replace is the Comcast modem or the Cisco ASA.  The Comcast modem is newer and only about 1 year old (rented from Comcast).  Since my actual LAN connection drops and I lose connectively I believe there may be some issue with the ASA or the ASA switch ports or some sort of internal hardware issue on the ASA.

View 4 Replies View Related

Cisco Firewall :: ASA 5505 Closing Connection?

Jun 24, 2012

I'm trying to get an asa5505 set up so that our web server can send an LDAPS login to a client's server and receive the request back. The default IP our traffic goes out on is different than where I want the connection to come back in on. So, I set a NAT rule to send all traffic from a specific inside IP out a default outside IP. I also allowed LDAPS traffic from the client's server IP address in and have nat'd it back to the appropriate inside IP address. It seems to build the outbound connection fine, but then seems to drop it right away, which then seems to not allow the response back in. I've attached a picture of the log, with (what I think are) the lines in question highlighted. I'm far from a routing expert, but this seemed like a fairly easy setup.

View 1 Replies View Related

Cisco VPN :: Setup A Vpn Connection At Remote Offices With A 5505?

Apr 11, 2011

I have setup a vpn connection at my remote offices with a 5505.  At my main office I have a 5510.From my remote offices I can PING my Main office server.  However when I go to set up a vpn connection through windows network and sharing center I can't seem to have the connection connect.....

View 15 Replies View Related

Cisco VPN :: ASA 5505 VPN Remote Desktop Connection Slow

May 23, 2011

I have a question on a VPN connection. I have a remote access VPN setup on an ASA 5505 to be able to remote into a location and check the HVAC program running on a PC. The remote connection connects fine, but when I use remote desktop to connect to the PC, it connects quick, but the screen redraw and reaction time is extremely slow. EG: I click on the program and it takes about 20 seconds to draw the screen, or I click on a menu bar and get the same times for reactions. Could this be a ISP Up/Download issue or is there something that I need to look at on the ASA to change?
 
If I connect to the remote and do a PING from my desktop to the remote Desktop, these are the results that I get:
 
Reply from 192.168.XX.XX: bytes=32 time=96ms TTL=128
Reply from 192.168.XX.XX: bytes=32 time=132ms TTL=128
Reply from 192.168.XX.XX: bytes=32 time=90ms TTL=128

[Code]......

View 4 Replies View Related

Cisco Firewall :: 5505 Broadband Connection With One Static IP

Jun 3, 2013

I am mapping static ip address to the local ip address.We have a bsnl broadband connection, and bsnl has provided us with one static ip address.We are using  broadband modem.Now I would liket to map this static ip address to one of the private ip address which is 192.168.1.2(database server).i want to do nat above ips if i do so then i dont have no ip to assign to my outside interface.I would like to access this device over internet, by typing my public (Static ip ) given by the BSNL.security device i have is cisco ASA 5505.

View 3 Replies View Related

Cisco Firewall :: Asa 5505 Clear Arp Restores Connection

May 23, 2012

I have a simple network with an ASA5505 mainly used for AnyConnect so there is little traffic. There is 1 laptop connected to the E0/1 of the ASA and then E0/0 is going to the internet port. I've noticed about ever 15-20 minutes, I lose all connection. The laptop can no longer browse the web and handsets can no longer VPN into the network.  I've noticed a few seconds after performing a clear arp, all the connectinos are restored. The laptop can browse the web and handsets can VPN in again.

View 11 Replies View Related

Cisco Firewall :: ASA 5505 - Back ISP Connection Doesn't Up?

Feb 27, 2011

I have asa 5505 with security plus license, I configured dual ISP with two different ISP provider. I followed below cisco document to configure dual ISP [URL] The Configuration works during the testing, while removing the primary ISP cable from firewall. The problem i am facing is my primary ISP is down but the gateway is still up and it not switch over to backup ISP. For SLA which IP should i monitor so once my primary ISP is down it will fallback to Secondary.

View 5 Replies View Related

Cisco Firewall :: ASA 5505 Inbound TCP Connection Denied

Oct 6, 2011

I configured an ASA 5505 a couple of weeks ago. Every thing is working properly except it sends irritating messages to the syslog server. Her is an example of the message:
 
     %ASA-2-106001: Inbound TCP connection denied from 195.215.221.56/80 to 10.70.13.90/252 flags PSH ACK on interface outside

     %ASA-2-106001: Inbound TCP connection denied from 195.215.221.56/80 to 10.70.13.90/2252 flags ACK on interface outside.

View 1 Replies View Related

Cisco Firewall :: ASA 5505 Lost Internet Connection?

Feb 27, 2011

I changed a configuration and suddenly I lost the internet connectivity... Result of the command: "show running-config"

: Saved:ASA Version 8.2(1) !hostname ciscoasaenable password qVQaNBP31RadYDLM encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 !interface Vlan2 nameif ATT security-level 0 pppoe client vpdn group ATT ip address pppoe setroute !interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2!interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!ftp mode passiveclock timezone EST -5clock summer-time EDT recurringsame-security-traffic permit inter-interfaceobject-group service DM_INLINE_TCP_1 tcp port-object eq ftp port-object eq ftp-data port-object eq wwwaccess-list ATT_access_in remark Linkstation Accessaccess-list ATT_access_in extended permit tcp any host 99.23.119.78 object-group DM_INLINE_TCP_1 access-list ATT_access_in remark Linkstation

[code]....

View 3 Replies View Related

Cisco Firewall :: ASA 5505 8.2(1) - Poor WAN Connection Speed

Apr 26, 2011

To sum it up the ASA is maxing out at 7MB down on a 25MB connection. The connection was tested with the ASA removed and the connection is fine.
 
This popped out at me the most but i'm not sure what it means:

12884935775 switch ingress policy drops for eth 0/0
 
[code]....

View 6 Replies View Related

Cisco VPN :: Setup Connection Between ASA 5505 And CentOS Server?

Oct 7, 2012

i want to setup a vpn connection between Cisco asa 5505 and centos server.
 
Here is my senerio:
 
ASA 5505 
Public IP address 155.155.155.2
Local NETWORK : 192.168.6.X
 Centos Server
------------------
Public ip address :  155.155.155.6

View 3 Replies View Related

Cisco VPN :: ASA 5505 - VPN Cellular Connection Cannot Allow Us To Get On Office Network

Jan 2, 2013

We have a ASA 5505 setup with VPN and using Cisco client 5.0. The VPN works without a problem if we use normal internet access (from home, motel, etc). However if we use a cellular wi-fi hotspot or tether a phone it will connect to the vpn but will not allow us to get on the office network

View 1 Replies View Related

Cisco VPN :: ASA 5505 - Configure AnyConnect And IPSec VPN Connection?

Mar 3, 2012

This is for an ASA 5505. I  am trying to configure an AnyConnect and IPSec VPN connection and I think it's almost there  but not quite yet. When I login from an outside network it gives me the  following error for the SSL AnyConnect "The VPN client was unable to setup IP filtering" and "Secure VPN connection terminated by peer" for the IPSec. I previously had this working since Oct, but I was trying to modify it a  little to accept LT2P for native Android VPN clients and that messed up  everything that I had working perfectly. I checked everything as best as I could to try and match the previous settings but still can't get the darn thing to work. I am trying to also do Hairpinning, I want all VPN  traffic to pass through this router... remote LAN and Internet traffic  for times when I am at unfamiliar wifi hotspots and need to check email securely.  I have included my running config. I also need to configure the ASA to accept native Android VPN connections. I read the most popular thread that worked for a few users but while doing those modifications that is where everything went downhill. T

: Saved
 :
 ASA Version 8.4(2)
 ! 
hostname ciscoasa
 enable password 8Ry2YjIyt7RRXU24 encrypted
 passwd 2KFQnbNIdI.2KYOU encrypted

[code]....

View 2 Replies View Related

Cisco Firewall :: ASA 5505 Dropping Internet Connection Randomly

May 24, 2012

One of our hospitals keeps reporting that their internet is going out for a while than comes back up, sometimes they even have to reset the ISP modem for this it to work again. I upgraded and switched ISP to Time Warner Cable and figured it would essentially solve the issue, but there are still reports of internet outage and our new ISP has confirmed multiple times that their end is still up. Our ASA 5505 was configured by a previous employee, but when looking at the running config I noticed that the Interface for our ISP is NOT set to Duplex Full and Speed 100.

interface Ethernet0/5

switchport access vlan 2

View 3 Replies View Related

Cisco Firewall :: ASA-5510 / ASA-5505 Loses Connection To Gateway

Jun 23, 2011

I have an ASA-5510 in a location that loses connectivity to the wan gateway after anywhere from five to fifteen minutes.  At first I thought that the unit might be defective, but I replaced it with an ASA-5505 with similar results.  A reload of the ASA-5510 will restore connectivity for the next quarter hour.
 
Here's the version information on the 5510:
 
Cisco Adaptive Security Appliance Software Version 8.2(1)
Device Manager Version 6.2(1)
Compiled on Tue 05-May-09 22:45 by builders

[Code].....

View 1 Replies View Related

Cisco Firewall :: ASA 5505 Doesn't Forward Incoming Connection To LAN

Jun 13, 2012

I just got a Cisco asa 5505 with the next OS and ASDM info ASA 5505 OS 8.4(3) ASDM 6.47 I configured and enter all rules to allow incoming traffic to LAN but it's not working also, I have one host inside that is configured in a second IP and create the rule to allow traffic to it but it doesn't work too.

Problem 1 I have VNC running in port 5900 tcp and I want to connect from Internet using port 6001 and this has to forware the connection to the real VNC port. In the configuration I have a few host with the same configuration but I use different outside port to get it.
 
Problem 2. I have a second IP with services: SMTP, HTTP, HTTPS and port 444 all TCP forwarding to a server in the LAN.
 
Facts: SMTP. Every time that I do telnet to the second IP looking for the SMTP port, the firewall doesn't let the incoming connection goes through and the LOGGING screen doesn't how that connection.PORT 6001 (outside)this port is configured to work with the IP in the outside internface and it was to send the incoming connection to a host inside to the real port 5900.Can any one check my configuration if I'm missing anything? for sure I'm but I didn't find it. Bellow is the configuration, I masked the Public IPs just left the last number in the IP, also I left the LAN network to see better the configuration.
 
CONFIGURATION.
: Saved
:
ASA Version 8.4(3)
!
hostname saturn1
domain-name mydominio.com
enable password SOMEPASS encrypted

[code]....

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved