Cisco WAN :: 5915 Router To Configure Multicast To Pass
Apr 9, 2013
I have a 5915 router. Trying to configure multicast to pass. I have implemented different version of the configuration, but the attached is the latest and suggest by CCIE support. I have a Java program on one side of the router that pulls the multicast traffic fromt he other side of the router. The data is not getting to the java program with this configuration. I have been working on this for a week and unable to see anything. Wireshark doesn't see the traffic. In the attached config, I have also included some stats.
hostname HPIB-Rtr!boot-start-markerboot system flash:C5915-ADVENTERPRISEK9-MZ.SPA.152-1.GC.BINboot-end-marker!!!no aaa new-modelcrypto pki token default removal timeout 0!!!!!
!ip multicast-routing ip cefno ipv6 cef!multilink bundle-name authenticated
interface Loopback0ip address 10.10.1.3 255.255.255.255ip pim sparse-mode!interface Loopback100ip address 192.168.3.1 255.255.255.0ip pim sparse-modeip igmp static-group 239.255.10.10!interface FastEthernet0/0ip address 172.30.255.1 255.240.0.0ip pim sparse-modeip nat outsideip virtual-
[Code].....
View 10 Replies
ADVERTISEMENT
Mar 1, 2011
I ' m not able to configure the asa 5510 to allow the multicast traffic to pass through ASA.The multicast traffic have to pass from inside interface to outside interface.Can I configure the multicast traffic to pass through asa with a static nat ?
View 1 Replies
View Related
Feb 19, 2012
WAN1 <-> LAN traffic
WAN2 <-> LAN traffic
WAN1 <-> WAN2 traffic?
Say, it is set DISABLED, what is / isn't blocked?
It reads: Multicast Pass Through IP Multicasting occurs when a single data transmission is sent to multiple recipients at the same time. Using this feature, the Router allows IP multicast packets to be forwarded to the appropriate computers.
View 1 Replies
View Related
May 15, 2012
Is there any way to add an E1/T1 WIC to the 5915 Embedded Service Router?
Can I add any additional cards to it?
View 1 Replies
View Related
Nov 9, 2011
how to configure Fortigate 200B firewall in web base using pass internet through Cisco 800 router.
View 1 Replies
View Related
Oct 20, 2011
I am trying to configure the NLB multicast for the Microsoft exchange. The moment I am enabling the NLB my core switch 6509 CPU is reaching 100% and whole network getting down. [code]
I thinking I am putting wrong command. I am not able to see the disable-snooping in 6509 Switch.
View 7 Replies
View Related
Mar 20, 2013
I have a 5915 mobile router with software version 15.2(1r)GC1. Ports FE0/0 and FE0/1 are routed ports. Ports FE0/2 through FE0/4 are layer 2 switched ports. I'd like to put FE0/1 and FE0/2-4 in the same address space so that all four ports can be used as a single LAN and FE0/0 would be used as a WAN port. How do I configure the router to place FE0/1 and FE0/2-4 in the same LAN.
View 1 Replies
View Related
Aug 8, 2012
Multicasting. The configuration is I have a 6506 as my core switch receiving multicasts from an interface assigned to VLAN10. I have a monitor port setup with a PC running Observer which says multicasts are being received on the core switch. On a different interface on the core switch I have a 2960G switch connected to it and this interface is on VLAN 10. The 2960G switch has a workstation connected to it that needs to receive the multicasts. How do I configure the 6506 and/or the 2960G to process the multicast traffic?
View 0 Replies
View Related
Mar 14, 2013
I need a switch to configure a static ARP entry for a MS NLB multicast.
Could answer me if I can do with the SRW2024-K9-BR?
View 4 Replies
View Related
Apr 18, 2012
Why do we need MP-BGP (and not BGP) to exchange multicast prefixes between multicast domains?
View 2 Replies
View Related
Feb 19, 2013
I try to pass multicast traffic between two vrf on the same 3750 switch. I have IP services IOS and sdm template routing.
here is my config:
ip routing
!
ip vrf vpn2
rd 1:1
mdt default 232.1.1.1
route-target export 1:1
route-target import 1:1
[code]....
Now I'm stuck - I don't know what to do to pass multicast traffic. Do I have any chance to run this config on 3750 chassis?Perhaps "Configuring Multicast VPN Extranet Support" document will be useful, but it concerns Catalyst 6500? [URL]
View 0 Replies
View Related
Jan 7, 2011
A PC connected to a Cisco 877 router and 877 router is connected to another router (7301) via GRE tunnel,Cisco 7301 router is a NAS server and is being used as a PPPOE server.If user create a PPPOE connection on his computer and dial with a username/pass we want to send the PPPOE traffic to 7301 router, so 877 router should pass the PPPOE traffic to 7301 and user will be able to connect,User -> 877 -> 7301(PPPOE server).
View 4 Replies
View Related
Mar 7, 2012
we have a Cisco 3825 router which does not work well with a DSL modem(ISP provided). I have configured the Gi0/0 port of the router to plug into this DSL modem but it does not ping to the ISP gateway. If we do a shut/no shut on the interface then it work fine for about 30 secs. Sometimes even for 1 hr. Then the packets drop and we cannot pass any traffic through this interface.
Now, if the ISP connection is terminated on a computer it works fine. It works fine without dropping any packet.I have tried various options like using a straight/cross cable. I have tried to configure the interface negotiation for 100/full, 100/half, auto/auto and almost all the options.I have also tried to interconnect the devices using a L2 device like a HUB. Nothing works.
View 5 Replies
View Related
Jan 11, 2013
I recently upgraded from a Cisco 3900 series router to a Cisco ASR1k router. Since the upgrade, I have internal clients who claim they cannot connect to external VPNs. These internal clients are behind a NAT that routes a public IP address to a group of clients with private IP addresses.
How can I ensure that all VPN traffic is able to pass through the NAT?
View 2 Replies
View Related
Dec 30, 2012
Looking to upgrade my old G router to the EA6500. I don't see anything about VPN pass through on the EA6500 or any linksys N router. Is this feature something they no longer include?
View 3 Replies
View Related
Jul 14, 2011
I cannot telent to 1941 router from a Window 7 PC and I can a Window XP PC. Telnet is enabled on Win 7 PC. I upgraded 1941 to latest IOS.Compters running Windows XP can telnet to router and hit the internet. Computers running Windows 7 cannot hit the internet. I replaced the 1941 with a 1760 router and Win 7 computers can telnet to router and hit the internet. I used the same config from the 1941 on the 1760.
View 5 Replies
View Related
May 24, 2012
I'm having some trouble with my P660RU-T1 configuration. I have recently set up a linux SFTP server at my home and am trying to access it via my public ip (eg 1.1.1.1), the problem is this public IP goes to the router which doesnt pass on the requests to the server.Last summer when i first messed around with this i had no problems with using the public ip to access the server, its only recently.
View 1 Replies
View Related
Oct 31, 2011
I bought a XBOX for my grandson and want to connect it to the internet for him. It wont connect without a WPA2 pass phrase. I tried entering 192.168.1.1 to access the router but it wont go though. I contacted Linksys and of course they said my router needed to be reconfigured at a cost.
View 4 Replies
View Related
Aug 20, 2011
I have e3000 but in VPN Pass through I don't have ( pppoe pass through )
Just I have is ipsec + pptp + l2tp only
How could i add ppoe pass through in my e3000
View 1 Replies
View Related
Nov 6, 2012
due to upcoming changes to our network I'd like to be able to pass vlans across the FE ports of a Cisco 1841 router.1 port would go to a managed switch and then to local devices on different VLANs.the 2nd port would go upstream to a Cisco 3825 at a different location which would then connect to the internet.due to monitoring behind the Cisco3825 we would like all NAT to occur on the 3825.
what I would like to happen is this example device connected to port 7 on managed switch gets an IP (10.0.7.10) from the Cisco 1841 in VLAN 7 (10.0.7.0/24).traffic from that device goes to the switch, then in f0/1 on the 1841 and out f0/0 still with the same IP info, no NAT occuring.traffic is received on the 3825 port 0/1 and then NAT occurs and out port 0/0 to the internet.
View 4 Replies
View Related
Aug 15, 2012
We have almost identical networks in two offices, with the only difference being, one uses an RV042 and the other an RV082.The setup is: two WAG54GS ADSL modems carry PPOA ADSL connections with static IPs to the two WAN ports of the RV0XX.The WAG54GS routers are configured to DMZ all incoming traffic to the relevant WAN IP of the RV0XXs. VPN pass-through is also set on them. The RV0XX port forwarding is set to forward a selection of traffic such as, PPTP, HTTP, HTTPS, RDP, POP3, SMTP and Remote Desk to the external adapter of an SBS 2003 server which processes all operations including ISA and Exchange.Mail for Exchange arrive through both ADSL connections for redundancy. VPN connection requests from remote users to the SBS come in through both ADSL connections.The office fitted with RV042 works fine and does all the following without problems.The office fitted with RV082 has issues. Remote VPN requests comming from ADSL to WAN port 1 of the RV082 connect successfully to the SBS2003 server, but the VPN requests coming from ADSL to WAN port 2 fail to connect! Similarly, incoming mail destined for Exchange don't get through if coming from ADSL of WAN port 2.I have updated the firmware on both RV042 and RV082, but the RV082 still has the above issues.
View 1 Replies
View Related
Jul 13, 2011
I cannot connect via VPN PPTP (normal setup in windows xp), I have managed to connect over VPN direct connected to internet, through the router (WRVS4400n) if I turn off the firewall. But I cannot connect with the firewall enabled,One more thing, the device is on and I have enabled the passthrough (and 'Multicast Passthrough' in firewall basic settings) for all available options where one of the options is PPTP.
View 1 Replies
View Related
Sep 22, 2011
Recently i had suffering with wireless connection problem, currently my wireless router connected to WAN directly, after that go into firewall and then go thru switch to end user PC, for LAN user there is no issue, but for wireless connected PC it is prompted with limited connectivity problem(DHCP is disable on router), after check with ipconfig /all. it seem likely due to wireless PC cannot get the IP from DHCP server. i am using DLink615 router. i had checked firewall setting there is firewall policy that connected all router ip into company LAN, but i don't think there is DHCP VPN setting up. is there anyway i can go thru firewall and get IP from DHCP server because if i set up DHCP on router, it cannot pass thru and access to LAN.
View 9 Replies
View Related
Jul 1, 2013
I am probably missing something so obvious, but I have been working on it for three days. I received a new modem DSL 2750B and have it LAN wired to my Dell Studio 1555. I asked my techy step son to hook it up to wireless while I was away. He could not do it and worked with Verizon to create a home network changing the SSID and WPA Key. They spent about a hour together on line and could not get the wireless to work and Verizon said its a problem with the Studio 1555.
So, I have been working on it since and can not fix it. The Studio is out of warranty and I have Windows 7 Home Edition. I spent a day and a half to finally get the Function F2 button to work and turn on wireless. This was only possible after downloading the Dell Quick Set and now the Radio On button shows in my Windows Mobility display. I checked my BIOS and Radio, WiFI, and WAN are all enabled.
When I boot up I can see the wireless network showing as available and at excellent strength. I click it to connect and it fails authentication. I ping the router at 192.168.1.1 and it shows both wired LAN and wireless LAN connected. So, I go to Wireless and go through the push button method of signing on to the router, pressing the WPS button on the router. It "spins" for 120 seconds and says fails enrollment.
I am thinking that I should have my laptop and router all reset and eliminate the network Verizon and my step son set up. This would give me a clean start and I can use the SSID and WPA key that came with the router..but, I'm not sure that is it or am I missing something else.
View 13 Replies
View Related
Apr 12, 2013
In our area Comcast has increased the internet speed to 50mb. I have a six year old WRT54GL. Can this router pass 50mb through to the computer on a wired connection?
View 5 Replies
View Related
Jun 22, 2007
I set up my daughter's Dell laptop last year to our WRT54G wireless router and I'm trying to connect to our wireless network now with another laptop (a new Dell) and can't find (or remember) my security code or pass phrase. Is there any place on the old laptop that I can access this info? How can I configure the new laptop without this info?
View 9 Replies
View Related
Apr 15, 2013
We recently acquire a cisco 2921/K9 router to interface 2 networks
Network 1 : 169.254.XXX.XXX/16 on GigabitEthernet0/0 interface
Network 2 : 192.168.1.XXX/24 on GigabitEthernet0/1 interface
On the network 1 side there is a multicast source (169.254.200.200 destination : 225.0.0.1) on the network 2 side there is 1 receiver which is not multicast capable(old) but i want it to receive the multicast stream for the moment we configure the ip multicast-routing and each interface each interface with ip pim sparse-dense-mode then configure the GigabitEthernet0/1 in order to join the multicast group (using ip igmp static-group 225.0.0.1) and wireshark confirm that the multicast stream on the network 2 side from 169.254.200.200 -> 225.0.0.1 of course the receiver don't the stream, but if i force a "multicast to unicast" process inside the router it shall be ok.. after many hour of internet browsing i found 2 solution :
- NAT, [URL]
- multicast service reflection (Cisco documentation)
The NAT example don't work ,what is the best way to do this task.
View 8 Replies
View Related
Mar 27, 2013
The multicast sends out fine and is received by the distant end modems fine but the distant end router sees the same source in the RPF and picks the lowest IP address neighbor to use so the router only picks up two of the four feeds.
View 2 Replies
View Related
Oct 16, 2012
I run an Allen & Heath digital mixer. The iDr32 mixrack sits on the stage and has a 2 port Ethernet switch on board, which allows the device to be controlled with a PC. If you then add a WiFi router then you can have wireless remote control from a laptop. Allen & Heath also sell an app for iPad to do the same. I have this working quite well although I am receiving no metering data from the Mixrack. Allen & Heath say this is probably because my router does not support multicasting. They list some routers which are recommended, but the list is rather out of date. I am trying to find a suitable dual band router with decent range on both bands. I would prefer a cable type, but since it will not be connected to the internet, it isn't important. When I Google "Multicast capable wifi router" all that comes up is a lot of stuff about video streaming. None of the manufacturers seem to list if their product supports multicasting. I understand that multicasting is usually used for video streaming, but in my case it seems to be a requirement to speed up data between the iPad and the Mixrack. Apparently some users of similar systems have encountered problems with multiple smartphone users in the audience seeking WiFi connections. The solution to this is to use 5GHz band, and switch off the SSID. Some have also found it best to use MAC filtering for security.
View 4 Replies
View Related
May 28, 2008
I'm swapping out a PIX, IOS 6.3 with an ASA 5520 v8. The PIX has the following 2 commands in it's config:
multicast interface outside
multicast interface inside
These commands do not exist on the ASA. I do not wish to enable multicast routing. What commands on the ASA are equivalent to the multicast commands on the PIX?
View 2 Replies
View Related
Jun 7, 2011
I have a LAN with multiple VLANs connected through Catalyst 3750 with IP Base image. In IP Base the router only supports PIM stub multicast (no PIM multicast routing),But I have an ASA connected to the internal router and to the internet router.Asa supports PIM multicast routing and can act as PIM RP. With this configuration, is there a way to configure an internal multicast network? That is a multicast server in one internal vlan (VLAN 1) and multicast clients in VLAN 2. Both VLANs connected to the C3750 router.
View 3 Replies
View Related
Oct 31, 2012
I have a switch 2960 with 15 multicast groups (for video) and now I am configuring a router 2811 to send two multicast groups to another network.But despite of there is no client sending join yet, the router is joinning in all multicast group, and because of that the router are not standing all the traffic. why the router is joinning in all multicast groups?How could I choose what groups router will join?
Router Config:
ip multicast routing
ip pim bidir-enable
interface f0/0
description Conected to Multicast Source Network
ip address 10.1.1.1 255.255.255.0
ip pim sparse-dense-mode
View 7 Replies
View Related
Nov 28, 2012
I have e1200 v1 with last firmware 1.0.03. Device using as AP/switch (no WAN port installed). When I open the TV chanal (239.0.1.3) the pictures 1 sec good and then stoped, device not responding. When TV off, 3 sec later internet works and device up.
View 4 Replies
View Related
