Cisco WAN :: 7206VXR - SMI Card Alarm LED Remains Amber
Aug 25, 2011
We are having Cisco 7206VXR with NPEG2 and the IOS c7200p-spservicesk9-mz.124-15.T10.bin.,PA-MC-STM-1SMI is connected to 3rd Slot of the Chassis. The Links terminated on the SMI are working fine and we are not getting any Error Messages on Chassis regarding the this SMI.
But here we have Amber LED Glowing on ALARM LED of the SMI Card.
As per the below Link: URL
This means Loss of Signal/Frame.
##Table 1-5 PA-MC-STM-1 LEDs
#LED Label
#Color
#State
[Code]....
View 2 Replies
ADVERTISEMENT
Aug 28, 2011
I would like add an alarm to LMS when a power supply of some device goes down. For instance, when the power supply fails LMS send an email or something like that.
View 2 Replies
View Related
Oct 16, 2012
An interface on 2921 router is not coming up. When I shut/no shut the interface, I see this:
Router#sh log | i 0/2
Oct 17 08:55:06: %IP_VFR-7-FEATURE_DISABLE_IN: VFR(in) is manually disabled through CLI; VFR support for features that have internally enabled, will be made available only when VFR is enabled manually on interface GigabitEthernet0/2
Oct 17 09:00:35: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
[Code]...
View 3 Replies
View Related
Mar 11, 2011
I have an RT73 USB Lan and in Device Manager it says the drivers are up to date and the device is enabled. However in Network Adapter Settings the status is Disabled. When I try to enable it Windows says Enabling.....then Enabled but nothing happens, it remains greyed out and disabled.
View 4 Replies
View Related
Apr 28, 2012
It's been working absolutely fine for me for nearly two years and all of a sudden it doesn't want to connect anymore. When I turn it on it will connect to the wireless network and stay connected for five minutes tops before disconnecting. Sometimes the wireless network is still being detected, sometimes not, but when I click on it to reconnect it rarely does (and when it does, it will sure enough disconnect again in no time).All other devices in the house stay connected and work fine; it is only my laptop that has issues. I took my laptop to another house and it has the exact same issues so it's definitely the laptop itself and not the routers.I live in Pakistan and my broadband provider for this household is Wi-Tribe. I don't know the type of broadband it is. I have no Anti-Virus apart from Microsoft Security Essentials.
View 5 Replies
View Related
Dec 22, 2012
My BT Home Hub Router needs to be reset regulary when I unplug my wired connection and change to wireless 1704 on a 3 month old Inspiron Laptop (i5, 8Mb).
I assumed that the wireless connection would be disconnected when I connect to the wired connected. And then when I disconnect the wired connection (when I move to another room), I assumed that the wireless connection would automatically connect. If I manually turn off the 1704 wireless adapter (Function F2) and just leave the laptop connected to the wired UTP connection, then then router is fine - but I dont have a mobile device. I have just re-ordered the connections so that the Local Area Connection (Realtek) is the first in the list and then the(Local Area connection 2 (Broadcom virtual, I dont know what this is) then the WIreless Dell 1704 b/g/n (Broadcom)
I can not find how to disconnect the wireless adapter automatically when I connect to UTP. I know that I can switch off the manually by Function F2, but would prefer not to. Would this prvide the solution, and how do I do it?
One23 i5 2010. XPS i5 2011. And an old Carrera PC
View 2 Replies
View Related
Jul 19, 2012
We are using version 5.3 with patch 5. Incremental and full backup are configured but every day we receive an alarm notification.
View 7 Replies
View Related
Apr 19, 2012
On Cisco ACS 5.2.0.26 Patch 10, I got this system alarm:Incremental backup is not configured. Configuring incremental backup is necessary to make the database purge successful. This will be useful to avoid disk space issues. View database Size is 2.92GB and size it occupies on the harddisk is 2.91GB
In "Monitoring Configuration > System Operations > Data Management > Removal and Backup", we got this information:
Database Purging:If database size exceeds 120 GB, a backup (if configured) and purge will be initiated. If database size exceeds 150 GB, a purge will be initiated.
Could View database size reach 120 GB ?I want to know how long will Cisco ACS works without problem and if I need to hurry to configure purge.
View 2 Replies
View Related
Dec 13, 2012
My router suddenly seems unable to connect to the internet through my modem. I've been troubleshooting it for a couple days now and nothing seems work.My router and modem both work perfect, individually.Connecting a cable from my modem to my PC lets me get online.Connecting a cable from my modem to my router doesn't work, link light remains off. [code]
View 1 Replies
View Related
Aug 13, 2012
We have 4 switches C3560 running EIGRP. We have PBR in one of them in this way: [code]We have conneceted a dedicated circuit in FastEthernet0/23.
The question is: ¿what would happen if circuit fails but FastEthernet0/23 remains in connected state? 192.168.1.6 will be unavailable.PBR will maintain forwarding traffic to IP 192.168.1.6? This involve that this traffic will fail.
View 4 Replies
View Related
Jul 10, 2012
I am getting alarms on Solarwind indicating interface down on "GigabitEthernet 4/7 - Gi4/d1" and "GigabitEthernet 4/8 - Gi4/d2" from our core switch 6509.Remote login to the switch does not show the interfaces when I do the "sh run" command. Now I am at site trying to identify and diagnose this fault.Looking at the numbering on the switch, it indicates to me the card where these alarms come from is from the 'intrusion dectection module'
how I may login and identify this interfaces and rectify these alarms.
View 4 Replies
View Related
Jun 18, 2012
I have the follow error in a SW3750:
%SFF8472-5-THRESHOLD_VIOLATION: Te2/0/1: Voltage low alarm; Operating value: 0.00 V, Threshold value: 3.07 V.
I used the command:
#sho interfaces transceiver
If device is externally calibrated, only calibrated values are printed.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
NA or N/A: not applicable, Tx: transmit, Rx: receive.
[Code]....
View 1 Replies
View Related
Apr 12, 2011
I have a Cisco asa 5510. I am doing attack a my firewall, using n map. I am seeing in the log the attack but i like that firewall send only alarm of attack by email . I have active email with warning and i received very much email.
I observed that graph show attack, but not ip of attacker, is possible that Cisco asa show the ip too ? The log show scanning with n map but not shunning IP and not send alarm. How i can send alarm ? The graph no show ip, it's possible show it.
View 10 Replies
View Related
Dec 4, 2011
My wireless from my Linksys E2000 router NEVER works. I've tried the same things and I have also tried to change the Advanced wireless settings, none of these things worked.When I unplug the energy cable from my router for ~15 secs, I sometimes can connect to a Wireless signal, this signal remains for about 30 seconds and is then gone again. This happens even if I'm standing right next to my router.I have no idea what the problem is, even I find this story very unbelievable, but I have tried everything I could and still we never have Wireless
View 1 Replies
View Related
Nov 5, 2012
We have a WAP 200 wireless G access point. It worked perfect before. About two weeks agao, we didn't change anything, it began to send empty alarm email every 10 minutes. We upgraded the software to newest version,restarted it several times. But till now, it still keep sending empaty alarm email.
View 1 Replies
View Related
May 30, 2013
I am using ISE 1.1.1.268 and WLC 7.2.111.3 and NAC agent version 4.9.1.6 on Windows 7 Client machines.
About once a day i get the error "ISE Alarm (WARNING): Dynamic Authorization Failed for Device".
The device it is referring to is my NAD, a WLC 5508 running 7.2.111.3
I have looked at the logs and I cannot see anything in the logs which corresponds to this message so that I can troubleshoot further. Maybe I can if I am enabling the correct logging level on the correct ISE component.
What are the components and the logging level that I should set to get some more detail about this error?
At the moment, I have only set debug logging on Active Directory. I have TRACE logging set on Posture, Run time AAA & prrt-JNI.
I do not want to enable too much debug logs, so what is the specific element that I should be debugging.
I thought debugging the posture element would be enough but when I look at the logs there is nothing there that relates to this message.
View 3 Replies
View Related
Feb 11, 2012
My DIR-615 FW:2.25 HW:B2 has been running totally stable and reliably ever since it was purchased until very recently.
I have been running my entire house wireless with the following setup...
Cable Internet 25Mib down/2Mib up
Desktop PC (ASUS M32N-sli Deluxe w/integrated Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter) Latest drivers on Win 7
Laptop PC (Intel Wireless WiFi Link 4965AGN) latest drivers, on Vista
Wii
Samsung Galaxy Infuse 4G
Everything was fine until my roommate bought a Samsung Galaxy Nexus. Now I randomly lose wireless connection to every device on the network. Default gateway 192.168.0.1 becomes unreachable... resetting the router restores connectivity...
Very interesting to note is the fact that while wireless communication with the router fails, wired connections remain active with fully functional internet access.
View 4 Replies
View Related
Aug 27, 2011
Since a few days my WRT120N gives an audio alarm (beep) about every 10 secs. Cannot find how to overcome this or find the root cause. Installed new s/w version. H/W reset. Nothing works.
View 2 Replies
View Related
Dec 9, 2012
I have a Cisco 5548 Nexus switch with 10Gbase-SR interface transceiver. This interface is connected to Server chasis.
The show interface transceiver details output shows High ++ alarm for Current. Additionally, i am getting output errors on this interface.
View 1 Replies
View Related
Jul 26, 2011
after a recovery of a main power failure the RPS LED on my Cisco 2960 is blinking amber. The command sh env power on the Switch tells me: POWER is faulty. sh env rps says: RPS is supplying.
On the RPS2300 the DC output LED is blinking green. Due to the manual this means: The RPS 2300 is backing up the connected device.
So far so true. The RPS has backed up for the time the main power supply was down.
But actually both, the Powersupply from the RPS and the main power are available.
But the Switch didn't switch back to it's bultin powersupply, so still the RPS ist suppling the switch.
What can we do to get the Cisco 2960 into the correct state? Is there a special command which i can use?
View 5 Replies
View Related
Jan 31, 2011
I was trying to connect Ethernet cable to my laptop LAN port, there was solid Green on my Hub and there was no light on my laptop LAN. I have swapped with a none good working computer and Ethernet cable everything works fine.I felt the problems is the physical LAN port on my laptop.
View 1 Replies
View Related
Jan 21, 2011
I have a new Cisco DPC 3010 modem and the link light keeps turning a amber color. When the light goes from green to amber my download speed drops from 12m to 8m and my upload goes from 2m to 312k. I cant find anything on what the light turning amber means. Also cant find out how to log into the modem.
View 0 Replies
View Related
Jul 22, 2012
I have a WLC 5508, its PS1 and PS2 are OFF state, SYS is blinking amber and ALM is continues amber, Its port s are not coming UP and I am not able to access the Controller, All ports are physically down and in console nothing is showing when I connect through the console cable.
View 2 Replies
View Related
Mar 22, 2013
I have a PS3 connected to a Gig port on my 3560. When I boot-up the PS3 I have to wait around 30 seconds for it to get DHCP.
I noticed the orange LED would stay on and go green after 30 seconds. I assumed I would have an error-state but I do not, the port show connected with no errors even though it's orange. I have no connectivity from the ps3 until the light goes green and then all is well. The port is access and I have manually configured duplex and speed.
Switch>show version
Cisco IOS Software, C3560C Software (C3560c405ex-UNIVERSALK9-M), Version 12.2(55)EX3, RELEASE SOFTWARE (fc2)
[Code].....
View 5 Replies
View Related
Oct 30, 2011
We have one Cisco ACE in our data center which is working fine but has Amber light on front & Rear.
I read the document & it shows that either it is a system fault or internal fan failure.
I am sure it is a fan failure because if there was any system fault then ACE dont work properly. should we replace the hardware?
unfortunatley we dont have support contract & i am working to get it one.
View 1 Replies
View Related
Oct 11, 2012
I have a modem DPQ3212. Downstream led is in amber. Link led is in amber, flashing. My ISP tell me all is OK, but my internet is slow. I need all leds in green. Only one downstream channel is open.
View 1 Replies
View Related
Mar 24, 2013
I have a DIR-615 H/W ver C1.Suddenly everything stopped working. The D-Link light is green and the power light is amber, no other light is up (LAN or Internet).I've try to do a reset, no effect.Can't connect to the router even with a LAN cable (LAN lights stays dead with a working cable and computer plug-in).
View 3 Replies
View Related
Mar 26, 2011
I connected my camera to my router with a network cable. It is a DCS-2121, H/W Ver A2, with firmware 1.04_FR.It received an IP address and I could access it fine with a web browser.Then I configured it to work wireless.I disconnected the cable but the camera wasn't accessible.Since I couldn't find it I re-attached it with a network cable, but this didn't work.So I pressed the Reset button to start over again.However, now I cannot get it to work anymore. When I plug in the camera and have it connected with a network cable to the router the status light remains RED.When I plug it in without a network cable the status led remains RED.When I connect it with a network cable to a computer directly, the status led remains RED.I've tried changing the network settings of my router to use 192.168.0.x as range, but it makes no difference. In all cases the status indicator remains RED.
View 2 Replies
View Related
Sep 12, 2012
We have one cisco core switch 6500 series which was configured portchannel on several gig interfaces. This port is used as a trunk to enable communication between VLANs. The VLANs is where several high-end servers/hosts reside.After we disable / unbind the portchannel, the port turns amber. The following is what we did on the interface
1-no switchport command
2- make the port as access mode #switchport mode access
3- shut and no shut
4- clear arp
5- clear mac
what else can we do on that particular interface. It is just on that particular interface, the rest are ok.
View 7 Replies
View Related
Jul 11, 2011
I am replacing an old Catalyst 3550 (that has 2 Gig ports) with a 3750 (that has 4)- I used the exact same configuration in the new switch. When I plugged in the new 3750, the trunk ports started blinking from green to amber. I dont know why this is occuring- it SEEMS to be fine, but we havent thrown a whole bunch of traffic over it.
View 4 Replies
View Related
Oct 9, 2011
I am currently supporting an engineer onsite remotely and have come across a strange problem . I have installed a few controllers but none of them have behaved in this manner. The model is a WLC 5508-50k9 model wireless controller and software 7.0.98.0, I have seen as per installation guideline that amber means th following
Distribution ports 1-8 Off: Not present.
#Green: Indicates SFP port is active and link is established.
#Amber: Present with failure
This mean that so coherent fault lies as follows on Layer 1&2 . The switch port light does not go green either. We have used both xover and straight but no luck
View 3 Replies
View Related
Apr 14, 2010
I have a Problem with a ASA 5505 when i power on the ASA the Power LED change to green and the Status light to solid amber. There is no Console output or anything else.
View 9 Replies
View Related
May 8, 2012
I have a Cisco catalyst switch 3750G has all LED lights staying amber still without blinking, I cannot console into it and it can’t boot past the POST.
THE ISSUE HAPPENED ON THE NETWORK AND IT WAS ISOLATED FROM THE NETWORK, SO NOW I AM TRYING TO RESOLVE IT OUTSIDE THE NETWORK
View 3 Replies
View Related
